HEllo all, i'm using the Fantastic Mobiz v2.0b4 ROM, and i'm happy (excluding the problem with BT..). TouchFlo cube it's pretty cute, but what about the "finger scrolling" on other applications?
The fingerscrolling works at least within contact and messaging application...
mole0815 said:
The fingerscrolling works at least within contact and messaging application...
Click to expand...
Click to collapse
do you mean in the HTC touch? i think that it works also in PIE and other programs where there's something to scroll.
In the WM6 roms with touchflo included the fingerscrolling does not work. (it works only in the cube)
I think that it's something like a driver or a program that run on top of other applications
Scrolling works
The scrolling works but nit if you use the stylus or finger nail you have to use the finger because of the tickness if the finger is larger then the stylus... thats the way it works.
gullum said:
The scrolling works but nit if you use the stylus or finger nail you have to use the finger because of the tickness if the finger is larger then the stylus... thats the way it works.
Click to expand...
Click to collapse
gullum do you mean in the Touch or S200 using Fantastic Mobiz v2.0b4 ROM ?
On my device does not works. If i go from cube to contact I cannot scroll the contact with the finger.
I had finger scrolling worked the first time I started up v2.0b4, and after some issues, did a couple of hard resets - since then have had no scrolling outside of touch (along with no BT/Wifi) - so you could be in the same boat.
I think one of the auto install files setups the scrolling but doesn't setup right - so you actually may not have it working - yet am running the same rom as the other posters.
gullum said:
The scrolling works but nit if you use the stylus or finger nail you have to use the finger because of the tickness if the finger is larger then the stylus... thats the way it works.
Click to expand...
Click to collapse
Sure. that's the way i did. Just use the finger (it does not work when u use the stylus!!!).... i can scoll even in pocket IE with my finger... (with Fantastic Mobiz v2.0b4 ROM)
Ya I too can scroll it (contacts, file explorer and IE too). Make a clean sweap using ur stylus from up to down or vice versa.
I confirm the scrolling work for the contacts if you use the cube before
By my XDA Neo installed with Fantastic B4 Rom, Finger Scrolling works on nearly every app window with scroll bar, except the Today screen. Tested by File Explorer, Resco File Explorer with Regedit, MemMaid, Coreplayer, Mdict and so on.
finger scrolling feature as an .exe or .cab?
Is there a possibility not to have all the work flashing a new rom again but installing the finger scrollig feature as an .exe or .cab? I'm pretty content with my current WM6 and actually don't have the time for flashing.
Do you see it maybe somewhere in your ext-roms?
Thanks for your help!
Mistellisch said:
Is there a possibility not to have all the work flashing a new rom again but installing the finger scrollig feature as an .exe or .cab?
Click to expand...
Click to collapse
Same here ...
i think its pretty hard to extract all those exes and dlls, so thanks in advance
btw, i got WM5 (Aserg)
Related
Hi All
I have been playing with QVGA and True VGA and there is just a too big Gap between the two
One is 2 Big and the other 2 Small
previously on my Jasjar I set the resolution to 144 (Slap Bam in the Middle)
The problem with this is all the VGA Stuff as well as the most of the icons is missing but ..... IT IS REALLY the best RES to work, not too smal or big the sliders etc also looks just right
Shouldn't we start looking at developing for 144 Resolution and get it over and done with once and for all
OK - It's been a long time since I've done this, where do we start!!!!!!!
VGA 128dpi
Hi Skillie,
144dpi resources are hard to get so it would be quite a lot of work. I can easily provide you with 128dpi resources because they are supported by Microsoft.
I will provide you with the necessay files within the next 2 days.
Cheers,
Tobias
VGA 128
This is the installation for VGA 128dpi. Give it a try. This one is for English devices. If you need any other language let me know.
If you don't need the video call function then you can fix the phone by setting the registry entry
HKLM\Security\Phone\Skin\Enabled=0 and perform a soft reset.
Have fun
PS: When I will find the time I will provide a little program to switch betwen 192dpi <-> 128dpi <-> 96dpi
VGA 128pdi
Sorry it seems that there was a problem with the upload ...
Yeah Man!!!!!!
This is so cool - did you do it all on your own?
I will test this for a while and let you know but the size is nether too big or small - This I can live with this for more than 10 minutes - look at that real-estate!!!!!
Thanks u are Tops!!!
VGA 128dpi
I'm doing PocketPC development device driver development since 2002, so it was not a big deal
There are some minor issues with some dialogs, like the wireless config dialog but I will fix that when I have some time. Actually I got the resources from the QVGA 320x320 emulator, which runs at 128dpi.
Cheers,
Tobias
I have been playing with it - my Phone works but the other usual stuff not
but i am so impressed with this I will actually keep it on this resolution
A lot of work has gone into fixing the the cosmetics i'm sure to find the right files for this as well
From now on I am recommending this to all who complain about big Icons \(or too smal ones )
Excellent Work !!!!!!!
I bet this will be part of WM7!!!!!!
Cheers
Frikkie
I'm gonna sound like a real noob now .... can i just install this new CAb and try it? If i dont like it uninstall and then reset and its gone? Dont wanna bugger up my Ameo as I have it working how i like apart from the screen space!
adamelphick said:
If i dont like it uninstall and then reset and its gone?
Click to expand...
Click to collapse
´
If you uninstall it again you will be back on 192dpi (factory default).
Cheers,
Tobias
I tried this utility quickly. Initially seemed ok. Today screen looked good as did the program files.
However when I tried to start Excel, nothing seemed to happen at all except the machine was apparently stuck on something. It stopped doing anything beyond putting the word excel in the title bar. Still saw the 3 pocket office icons on the screen and that's all that happened. Had to manually stop Excel with the memory tool. Uninstalled the vga cab and all is back to normal, including a working Excel.
I tried this. Excel and word worked perfectly for me.
The backlight glider also has no problem. HTC homeplug is perfect.
Phone application works although it leaves a space at the bottom. Also,I can't see the dialed number if it is not one stored in the contact database. Any way it still beats VJBigphone hands down.
Comm manager is messed up still.
Standard keyboard are too small, as expected. However the Tengo keyboard is still prefect.
All icons on tasksbar are perfect. Today screen icons are completely perfect.
The beautiful standardcalculator skin is gone, replaced by ugly looking round lines for the keys. But this is no big deal. I don't need the standard calculator anyway. HiCalc is the way to go, and HiCalc works well, other than a little gap at the top.
This resolution is way way better IMHO than ozvga or mvrtrurvga. The size of the taskbar and bottom bar is a lot more pleasing, and blend in with the application better, since theit sizes does not contrast too sharply from the button sizes of traditional applicationapplications.
The only real problem is, my navigation software iGO my way is completely messed up. What a pity. I like this resolution very much,but would hate to have to uninstall then soft reset to drive. After driving,I would have to install then soft reset to get back to this.
Is it possible to have a program to toggle,at least to remove the need for installing and uninstalling? I suppose it is not possible to avoid the soft reset?
eaglesteve said:
Is it possible to have a program to toggle,at least to remove the need for installing and uninstalling? I suppose it is not possible to avoid the soft reset?
Click to expand...
Click to collapse
I will provide you one this evening. BTW: TomTom for instance works perfectly with this resolution. iGO also doesn't work with 96dpi on VGA as far as I know. I'm sorry
Cheers,
Tobias
Just surprised why it takes so long for this utility to come out. Very very fantastic!
Good... at last something new to play with since the WM6 flashing.
This is definitely the resolution that brings the X7500 to its fullest rights
As mentioned earlier someone had issues with the Excell but I also had a issue but everything works now
Cool
I'm looking forward for the toggle to switch the display modes. Thanks for your huge contribution.
Does it work with WM6? To come back to factory resolution is it enough to uninstall it?
THX so much!
asci said:
Does it work with WM6? To come back to factory resolution is it enough to uninstall it?
THX so much!
Click to expand...
Click to collapse
Yes it works on Wm5 & 6
and uninstalling it actually restores it
PS This looks awesome on the jasjar as well (But obvioulsy nowhere near the X7500
Regards
Skillie
THX so much...about phone skin? Should I use an appropriate skin to use the phone?
Great, but some icons missing
Hi, I love it, however some of the small icons in SPB Pocket Plus / Diary are missing... any chance for a fix?
http://blog.yam.com/leo2016/article/11682010
This is the original Link to a working TouchFlo (Alpha) I am currently testing on the Athena using VGA 96 DPI and the AP/PK's latest v2.0. I have included a zip folder of selected screen shots. I first found this link outside the forum, then learned that other devices on the forum are already working with it.
The program is installed via two CAB files, one installs Adobe FlashLite, the other is Szabi CubeLauncher. Perform a soft reset after loading. Launching is currently to a 'Home Screen' Start>Programs>CubeLaunch. The home background is a bit suggestive, so if you would like to avoid that image, copy the attached bg.jpg to Program Files>Szabi>CubeLauncher and over write the existing file. It can be any 240x320 jpg you prefer.
When you install the CubeLauncher, you also get a CubeConfig program which lets you customize any of the 5 faces of the 'Cube' which is relally a 5-sided prism or polyhedron. Screen shots of each face are included along with one transitional rotation captured.
TouchFlo has been on of the hottest topics around the forum with nearly every device scrambling to cook it into ROMS. Up to now, cooking was necessary as the base applications from the HTC Touch are dll driven. Since this application is Flash(tm) enabled, there is no need for booting with the dll's.
Launching from the home screen is much like the HTC Touch, with an UPWARDS swipe of the finger from the bottom or middle part of the screen. Sides are rotated forward and back with sideways swipes as you would intuitively expect. You can also open and close the cube with a single stylus poke in the bottom center of the screen. Close from the home screen by touching the lower right signal bar.
The first page is a 6 application program launcher followed by a twelve slot phone contacts photo gallery on page two. Page three is a 6 app media page while page four is primarily for MS Office Apps. Page five is yours to play with.
The developer's web site is in Chinese, but the translation indicates that trials of the demo and feedback are welcomed. You can download the demo at the following Link: Http://rapidshare.com/files/54065589/Szabi-CubeLauncherICON.rar
It is not a finished work (yet) but it is getting close. Please provide your thoughts and interest so the the Project Team can assess wether or not to work on this for our devices. As you will see, we can easily do more with VGA quality backgrounds and icons, but the basics are definitely there.
Kind Regards to the Developer
guau! looks very nice! thanks bro!!!!
Nice find...
Hi raskell.
Excellent find! We'll look into this...for sure.
raskell said:
http://blog.yam.com/leo2016/article/11682010
(...)
The home background is a bit suggestive, so if you would like to avoid that image, copy the attached bg.jpg to Program Files>Szabi>CubeLauncher and over write the existing file. It can be any 240x320 jpg you prefer.
(...)
Click to expand...
Click to collapse
I prefer the original one... hmmmm
The program... Great finding.... the program... yes, and the wallpaper.
mackaby007 said:
Hi raskell.
Excellent find! We'll look into this...for sure.
Click to expand...
Click to collapse
yes we will. nice find
Any idea if this works at 128Dpi ? My eyesight isn't what it used to be (says he leaning on his zimmer frame)
Nice find, thanks for sharing.
Pawel062 said:
yes we will. nice find
Click to expand...
Click to collapse
Did you try?
I would like if it is compatible with ROM Black Touch AP2
If you need not change the dpi i am all up for it!
would someone be super kind and put on a direct link or something else than rapid share, coz i can't use that from my company
Installed on my X7500 WM6 ITA with 96dpi setting, here they are my considerations:
1. Graphic should be improved with an appropriate resolution of images used to build the interface. (I hope I can do it by maself)
2. Scrolling works well even if touching feedback should be more reactive on striping finger over display
3. Not all the applications link work. I hope I can customize by myself
4. Home screen works fine, images resolution apart.
Nothing I can say about RAM and battery usage...still testing it.
Confucious said:
Any idea if this works at 128Dpi ? My eyesight isn't what it used to be (says he leaning on his zimmer frame)
Nice find, thanks for sharing.
Click to expand...
Click to collapse
Tested with 128 DPI Settings and it looks and works the same, regardless of the font. Some of the demo apps are not set to the correct file links, however using the CubeConfig module, this is easily corrected. I just went through each screen and tested what worked an what didn't, then ran the CubeConfig and changed the broken links. Again, this is an (Alpha Demo) but it is working!
Bother! Was hoping you would say it didn't work
I really should know better than to install beta software, let alone alpha!
Can I resist trying it......
probably not !
Thanks
raskell said:
Tested with 128 DPI Settings and it looks and works the same, regardless of the font. Some of the demo apps are not set to the correct file links, however using the CubeConfig module, this is easily corrected. I just went through each screen and tested what worked an what didn't, then ran the CubeConfig and changed the broken links. Again, this is an (Alpha Demo) but it is working!
Click to expand...
Click to collapse
Tested with 192 DPI settings and it looks and works the same...
Does it work in WM5?
satanisme said:
Does it work in WM5?
Click to expand...
Click to collapse
Everything I have seen and know about this, YES, it should work fine in WM5. I do not have a WM5 device configured at present so I haven't tested it there. If you do test it, report back please so others can know this as well.
very nice app, with lots of potential,
I just get " Unexpected error in CubeLaunch.exe"
All I have installed is the Szabi CubeLauncherICONB.cab - do i need to install somethoing else?
Confucious said:
I just get " Unexpected error in CubeLaunch.exe"
All I have installed is the Szabi CubeLauncherICONB.cab - do i need to install somethoing else?
Click to expand...
Click to collapse
yes flashlite
when you reset a notify icon will appear bottom right click it too see the cube.
oh btw the original developer is on XDA
this thread looks very promising.
http://forum.xda-developers.com/showthread.php?t=328010
Whenever I hit the icon I get a "Not supported Landscape mode yet;"
I have tried to uninstall then reinstall but still get the same message. Any ideas? Using the X7500 on 128dpi. Thanks
Hello, I have the Verizon XV6800 with the official WM6.1 release. I've seen that many phones are able to scroll through folders and applications just by swiping their finger up or down the screen. Is there a setting or an application available so that I can do that on my phone? Thank you for your help ahead of time.
Also, I am not entirely sure if this is the correct section to post this, if it is not, please let me know.
Yes, look for ftouchflo
kareem9nba said:
Yes, look for ftouchflo
Click to expand...
Click to collapse
I use Opera for web browsing (uses finger scrolling)
Vito fun contacts (uses finger scrolling)
Resco File Explorer (uses finger scrolling)
There is no native option in windows mobile 6....
I've never used touchflow, but hear good things about it... maybe I'll grab it now..
Here is a youtube demo of touchflo
http://www.youtube.com/watch?v=YQ8TQ9Rr_7E
Similar to SPB mobile shell.
kareem9nba said:
Yes, look for ftouchflo
Click to expand...
Click to collapse
I've tried installing this on my P4000 a few times, but it's been unsuccessful every time though.
x51 said:
There is no native option in windows mobile 6....
I've never used touchflow, but hear good things about it... maybe I'll grab it now..
...
Similar to SPB mobile shell.
Click to expand...
Click to collapse
The OP is looking for fingerscrolling across applications rather than a front-end shell.
efrost's FtouchFLO was mentioned. schapp's accompanying Ftouchflo Config is wonderful to tweak it.
There's also efrost's later pay version FTouchSL.
Both versions work rather perfectly.
Thank you for your replies. I looked at the Ftouchflo and I do not think that is what I am looking for. I do not want to be able to switch between programs by sliding my finger across the screen, all I want is to be able to scroll up and down on pages without using the scroll bar.
fps_noob said:
Thank you for your replies. I looked at the Ftouchflo and I do not think that is what I am looking for. I do not want to be able to switch between programs by sliding my finger across the screen, all I want is to be able to scroll up and down on pages without using the scroll bar.
Click to expand...
Click to collapse
FTouchFlo and FTouchSL will do what you are looking for. They are excellent launchers. But they also allow you to scroll up and down with any of your applications. FTouchFlo is the earlier, free version of FTouchSL.
fps_noob, you may configure each to do only exactly what you want.
By default, Ftouchflo only does finger scrolling.
Because i couldn't find a working Bubble Wrap game for my WinMo phone, here is my first try in game development for mobile devices
wBubbleWrap is very simple, time wasting game, with two goals: pop some bubbles and make some noise.
Requirements:
WM touch screen device with CF 3.5
v 1.2:
- added vibration feedback on bubble pop
- added settings to change bubble size and turn vibration on/off
v 1.1:
- menu is opened on single tap in top left corner
- new icon
- some graphics improvements
actually one already exists, made by floft.
here is a link to it: http://freewareppc.com/games/bubbles.shtml
brilliant little app. any chance of a nice icon.
top marks
AthenaLod said:
actually one already exists, made by floft.
here is a link to it: http://freewareppc.com/games/bubbles.shtml
Click to expand...
Click to collapse
qvga only
XaMaB said:
Because i couldn't find a working Bubble Wrap game for my WinMo phone, here is my first try in game development for mobile devices
wBubbleWrap is very simple, time wasting game, with two goals: pop some bubbles and make some noise.
Context menu is hidden on double tap on first bubble in top left corner
Requirements:
WM touch screen device with CF 3.5
Click to expand...
Click to collapse
Thanks a lot!!
I love this one
Melvin says
It's working on my touch diamond
Thanks.
Very funny, thanks
A completely inane app & I love it.
Thanks for your work.
XaMaB said:
Because i couldn't find a working Bubble Wrap game for my WinMo phone, here is my first try in game development for mobile devices
wBubbleWrap is very simple, time wasting game, with two goals: pop some bubbles and make some noise.
Context menu is hidden on double tap on first bubble in top left corner
Requirements:
WM touch screen device with CF 3.5
Click to expand...
Click to collapse
Thanks for the app.
Eventhough netcf3.5 is installed, app is not getting installed.
Help is appreciated.
Using Leo 1.66 rom 2.07 Radio
Solved, Downloading from Leo wont install, but form PC will do Works like charm....
cool
My kids love it. only thing i have noticed is (for me) it is very difficult to get teh menu to appear.
Any chance that you can change the app so you can drag across the screen and pop multiple bubbles? That would just make it an even more usable app
Cheers
Jonas
testing in my Pure with TESS Pride IV ROM
[email protected] said:
qvga only
Click to expand...
Click to collapse
the old one works pretty well on my fuze. doesn't hurt to a new one though
Hi, I tried it on my unbranded hd2 (Leo), but when I run it I get the error message:
"An unexpected error has occurred in wBubblesWrap.exe. Select Quit and then restart this program, or select details for more information.
This application requires a newer version of the Microsoft .NET Compact Framework than the version installed on this device."
in more info, it says MissingMethodException
I'm just running the normal rom from htc (latest update). Do I really need to upgrade my .NET framework. If so, does anyone know how?
can you add feedback when poping the bubble, like vibrate the phone like whne using on screen kb?
lol..gr8 app..working on my topaz, but as another poster said I cant get the menu to come up so I can only play once.
nice app! working on my topaz. The only problem I have is that I cant get the menu to appear. would appreciate if you could fix this problem
Made sure to pop every last one of them!
NIKOKAPS said:
Made sure to pop every last one of them!
Click to expand...
Click to collapse
rofl
tap double on the left upper corner
works like a charm!
Hey guys, as you may heard, an SDK is released for developers to add to their applications which allows user to do multi-touch things on a device which is equipped with a resistive touch screen, just like our Topazes. Well, it makes us able to do pinch and zoom, rotate to exit and such things. WHAT WE NEED is great application developers to add this SDK to applications just like Manila. Your co-work will be pleased. Here's the link to the thread:
[SDK] Dual-Touch SDK for Resistive Screens V1.0 Beta + Rotation Alpha + Demo App
Regards.
NO ONE??!
Oh, you mean no one is interested??! I got disappointed! It would be a great work to enable multi touch in manila 2.5 for resistive screens...
Black.Heart said:
Oh, you mean no one is interested??! I got disappointed! It would be a great work to enable multi touch in manila 2.5 for resistive screens...
Click to expand...
Click to collapse
you cant pinch and zoom a resistive screen, it just thinks you're single touching in between your fingers, try it. This isn't about waiting for a dev kit, it's just beyond the capacity (lol capacitive) of a resistive screen.
edit - I know what SDK you're talking about, and I don't see it being accurate, sorry.
Likewise, I cannot imagine it being possible. It is simply physically incapable of that and may use algorithm instead which may give inaccurate reading.
Wiggums said:
Likewise, I cannot imagine it being possible. It is simply physically incapable of that and may use algorithm instead which may give inaccurate reading.
Click to expand...
Click to collapse
Then watch this:
Watch SDK Demo Application Video
It's simple: It simulates multi touch. When you point with finger #1 and then after point finger #2, device holds the first point and drags a line from that point to where finger #2 is. And then after releasing finger #2 it returns to finger #1's point. You can see it through notes or manila slider. That's how this SDK came out. It simulates this lining thing and makes device think you are doing multi touch. That's how you can Pinch and Zoom or Rotate to Exit like capacitive screen. But I agree. Since device can't recognize tow different points at the same time (like you said it's technically impossible for a resistive screen) we can't hope for a complete multi touch functioning. But at least we can do those two things I mentioned above.
i find multi-touch useless...its just a 'fancier' way to do things but really its easier the conventional way on ur/my phone. ei: the zoom bar on my htc pure.
i saw the lock video demo but its just faster and easier to lock ur phone the way everyone usually does it rather than having to put both of ur fingers onto the screen and rotating it. i guess this would really depend on wat kind of program the mutli-touch craze would really be of a benefit to. as for the programs thats been developed with multi-touch so far, i dont see much of a use for it. but thanks for making it possible for others to develop more programs with multi-touch.
Black.Heart said:
Then watch this:
Watch SDK Demo Application Video
It's simple: It simulates multi touch. When you point with finger #1 and then after point finger #2, device holds the first point and drags a line from that point to where finger #2 is. And then after releasing finger #2 it returns to finger #1's point. You can see it through notes or manila slider. That's how this SDK came out. It simulates this lining thing and makes device think you are doing multi touch. That's how you can Pinch and Zoom or Rotate to Exit like capacitive screen. But I agree. Since device can't recognize tow different points at the same time (like you said it's technically impossible for a resistive screen) we can't hope for a complete multi touch functioning. But at least we can do those two things I mentioned above.
Click to expand...
Click to collapse
i tried that long time ago and i found that it still "WORKS" if i slide my finger from 1 corner to the opposite corner. Like the above, i dun think it's practical to use this so called MULTITOUCH kit on a NOT-MULTITOUCH-SUPPORTING resistive screen.
if ppl are so fond of multitouch, they should buy a hd2 instead of trying to implement such a not-too-possible feature on the td2
tomanlam said:
i tried that long time ago and i found that it still "WORKS" if i slide my finger from 1 corner to the opposite corner. Like the above, i dun think it's practical to use this so called MULTITOUCH kit on a NOT-MULTITOUCH-SUPPORTING resistive screen.
if ppl are so fond of multitouch, they should buy a hd2 instead of trying to implement such a not-too-possible feature on the td2
Click to expand...
Click to collapse
That is true... But at least we can satisfy our selves that we are multi touching!! It's better than nothing!
Tell HTC to give ATT an HD2 and then you might have a point.
Question - why can't this software be put into the OS so that it just works with all apps doing it like keyboardcontrol is doing - intercept the mouse taps and then based on the application translate the multi-touches into exactly what that application needs - even repeated keystrokes etc - manila could be programmed by page or just one set for the whole app - whatever can work. That would be the killer way to get this into play asap.
seargent007 said:
you cant pinch and zoom a resistive screen, it just thinks you're single touching in between your fingers, try it. This isn't about waiting for a dev kit, it's just beyond the capacity (lol capacitive) of a resistive screen.
edit - I know what SDK you're talking about, and I don't see it being accurate, sorry.
Click to expand...
Click to collapse
You may be interested in this:
http://www.engadget.com/2009/02/19/stantums-mind-blowing-multitouch-interface-on-video/
bsw11 said:
Tell HTC to give ATT an HD2 and then you might have a point.
Question - why can't this software be put into the OS so that it just works with all apps doing it like keyboardcontrol is doing - intercept the mouse taps and then based on the application translate the multi-touches into exactly what that application needs - even repeated keystrokes etc - manila could be programmed by page or just one set for the whole app - whatever can work. That would be the killer way to get this into play asap.
Click to expand...
Click to collapse
That's why I asked developers to co-operate with me. This would be a big job if it's done, we can hope for WP7S... Check out the video our friend sent on post #10.
Black.Heart said:
That's why I asked developers to co-operate with me. This would be a big job if it's done, we can hope for WP7S... Check out the video our friend sent on post #10.
Click to expand...
Click to collapse
Not sure why they are so negative about it, it has been done and proven even as a beta, and from the sdk that was released it seems very likely. I'm not a super cool programmer but I was working on a Mass Effect Codex and I'll try working the multitouch into it if possible, no guarantees tho
OCedHrt said:
You may be interested in this:
http://www.engadget.com/2009/02/19/stantums-mind-blowing-multitouch-interface-on-video/
Click to expand...
Click to collapse
It's all great and well to claim that there is no jitter etc on a "standard" resistive touchscreen, but that's a tech demo, it proves nothing for us having these kinds of results, EVEN if that is their goal.
also, watch the video you posted, the guy says it CANNOT be adapted to current touchscreens, it's an additional specification that they implement by working with major screen makers
mrhayami said:
Not sure why they are so negative about it, it has been done and proven even as a beta, and from the sdk that was released it seems very likely. I'm not a super cool programmer but I was working on a Mass Effect Codex and I'll try working the multitouch into it if possible, no guarantees tho
Click to expand...
Click to collapse
Thank you for your co-working. I'm a programmer too (C++ language) and I can help.
although multitouch is a great feature , but guys , we have a cool zoombar , that using it is a lot easier than using the screen.
I would love to help with development, but my education of software developer starts in september. I would like to help testing the application on my MDA Compact V.
Cheers,
Yassir
Be a good sport, the world is so infested with bitterness and apathy if you know what I'm saying. I wish this project well!
yotube not open my contry
please pload in hotfile or rapid or other host
pleas
thanks