Hi all
reading some signatures of someone on this forum I've read that there is a version 1.04 of the Ipl.
I have the 1.01, exactly what changes between the two different versions? and how I can improve to 1.04?
cabi.costa said:
Hi all
reading some signatures of someone on this forum I've read that there is a version 1.04 of the Ipl.
I have the 1.01, exactly what changes between the two different versions? and how I can improve to 1.04?
Click to expand...
Click to collapse
Put Hard-SPL v.7 on your device and you will get it.
Just done but results are unpleasantly SPL v2.10 Olipro and IPL v1.01
cabi.costa said:
Just done but results are unpleasantly SPL v2.10 Olipro and IPL v1.01
Click to expand...
Click to collapse
Why is that unpleasant? (they are better than 1.04 for all normal users)
Agree with Joedoe and Sambartle; just use Hard SPL v7 and it takes care of the bootloader for you. Don't need to do anything else.
Guys this user is talking about IPL...not SPL...
If you follow my HardSPL install guide...you will have IPL 1.04 once it is complete.
what changes from 1.01? why an user some post before says that is better 1.01?however thank you vanx i've just flashed my phone with your guide and it's fantastic..
mrvanx said:
Guys this user is talking about IPL...not SPL...
Click to expand...
Click to collapse
Doesn't flashing hardspl do both though?
mrvanx said:
Guys this user is talking about IPL...not SPL...
If you follow my HardSPL install guide...you will have IPL 1.04 once it is complete.
Click to expand...
Click to collapse
Hello Mrvanx,
Your install guide appears OK for my Softbank X01HT with the following information. Please confirm.
Do I need to upgrade the Radio Rom before upgrading to WM6
IPL 1.01
SPL 1.09
ROM ver. 1.23.708.4
ROM date 07/24/06
Radio ver 1.06.00.10
Comm Protocl ver 32.37.7010.01W
Best Regards
Ken
Yes you need it and before did everything flash the booloader with the HardSplV7..and there's a 1.48.00.00 radio out now..
So someone could tell me the differences between an IPL 1.01 and IPL 1.04?
So no-one could tell me what are the differences between an IPL 1.01 and IPL 1.04?
Related
I read in wiki "Bootloader 1.06 and 1.09 do not have 'rtask' command, this means: you will not be able to do radio upgrade only on your Hermes, you will stay always with the Radio version contained on the ROM you flash"
Does that mean that my Tytn i can upgrade just all completed ROM?
I try to install just radio rom, i have error 114.
May i install a "RUU_Hermes_HTC_WWE_2.05.255.1_6275_1.34.00.10 _108 _Test.exe" ??? in my Tytn?
My IPL is 1.00 and SPL 1.06
Thnks.
Don't care about 1.06 or 1.09 of SPL, both can be down graded to 1.04. After that you can unlock CID and up any rom you want.
I don't know how to put the file in this mail but I can help you by sending it per email. Just give me your address.
Don't flash the entire new roms or you will be losing the ability to change your radio roms.
nugift said:
Don't care about 1.06 or 1.09 of SPL, both can be down graded to 1.04. After that you can unlock CID and up any rom you want.
I don't know how to put the file in this mail but I can help you by sending it per email. Just give me your address.
Click to expand...
Click to collapse
[email protected]
Before i have bricked one wizard (wronlgy installed a chinese ROM from ftp), now im afraid to manipulate
dodadent said:
[email protected]
Before i have bricked one wizard (wronlgy installed a chinese ROM from ftp), now im afraid to manipulate
Click to expand...
Click to collapse
We all have the same feeling if something went wrong. But there is no risk when you follow the user manual carefully. Please check your mail, I sent you already! Have fun!
nugift said:
We all have the same feeling if something went wrong. But there is no risk when you follow the user manual carefully. Please check your mail, I sent you already! Have fun!
Click to expand...
Click to collapse
Thnks man, a lot.
Everything is going OK.
Thnk you very much again.
hi everyone
i have imate k-jam. could i download rom 6.5 from this site.is it g3 or g4.
ipl 1.01 spl 1.06 gpm 01.01.10
radio version:01.01.10
You can if you wish to have a brick....
The K-Jam ISN'T a Hermes as far as I know...
k-jam is a WIZARD, go to WIZARD rom development section. also for any type of queries, post ur queries in wizard rom development section.
ipl 1.01 spl 1.06 gpm 01.01.10
radio version:01.01.10
how can i upgrade to 6.5 please help me
ultramag69 said:
You can if you wish to have a brick....
The K-Jam ISN'T a Hermes as far as I know...
Click to expand...
Click to collapse
what is brick how can i get it
rockonhell said:
what is brick how can i get it
Click to expand...
Click to collapse
A brick=paperweight
just flash something that doesn't belong on the hermes (like wrong radio, or rom built for different device), and POOF! you have yourself a nice fancy brick!
Guys, how do I dump the SPL, IPL, Bootloader, radio ROM and Radio bootloader version?
I will use the unlocker to unlock the TYTN but then I want to roll back to the default version numbers that I have. I dont want it to stay with the HardSPL or with the newer Radio.
Thanks
Have you ever try to use the search function first? ...or just read the Wiki?...here are the how to...but next time read the wiki first!
Regards,
Primoz
Guys, it starting to get boring.
On every question asked, you send to RTFM.
Maybe, just MAYBE, I already READ everything and I STILL (!!!) have a question? Maybe I'm not as stupid as you think? Maybe the guides are NOT (?!?!!) 100% perfect?
To the subject; I did dumo the ROM. However, as I understand (FROM the guide), it DID NOT dump the SPL and the radio (or the bootloader and the Radio bootloader).
Please confirm that it DID extract everything and that if I'll burn it back to the device it will be 100% the same as it now.
Also, if I first use the unlocker, and then burn back the original radio, will it get locked again?
knfevg said:
Guys, how do I dump the SPL, IPL, Bootloader, radio ROM and Radio bootloader version?
Click to expand...
Click to collapse
You don't need to dump that, every version is available as a shipped upgrade so you can extract it from there and flash it later if you need it for warranty reasons.
knfevg said:
I will use the unlocker to unlock the TYTN but then I want to roll back to the default version numbers that I have. I dont want it to stay with the HardSPL or with the newer Radio.
Click to expand...
Click to collapse
Most probably your rom is available as a shipped NBH, just flashing it will lead your device to the original rom. The only thing you can't do is go from htc_boot 0108 to htc_boot 0106, so make sure you don't upgrade to a very new radio if you want to be able to go back to your original radio if it has a 0106 radio bootloader.
knfevg said:
To the subject; I did dumo the ROM. However, as I understand (FROM the guide), it DID NOT dump the SPL and the radio (or the bootloader and the Radio bootloader).
Click to expand...
Click to collapse
Following the guide, you've only dumped the OS part of the rom.
knfevg said:
Please confirm that it DID extract everything and that if I'll burn it back to the device it will be 100% the same as it now.
Click to expand...
Click to collapse
Tell us how it is now.
knfevg said:
Also, if I first use the unlocker, and then burn back the original radio, will it get locked again?
Click to expand...
Click to collapse
no.
POF, you are THE GOD!!! Thanks, finally someone HELPS!!
Ok, here are the clarifications:
1. How do I check the htc_boot version? I have the 106 SPL so I can’t launch the Radio loader from there....
2. If I dumped only the OS part I guess I should dump the rest too. How do I do that and how do I make the "burnable" afterwards?
3. Here is the current "setup":
The device is Orange branded. It’s exactly as described under "Hermes versions" in Wiki for Orange-Israel:
Israel Versions
HERM200 Orange IL HTC TyTN Israel QWERTY Locked OS 5.1.195 (Build 14955.2.3.0) 1.18.255.3 07/22/06 WWE 1.18.255.112 1.03.03.10 32.34.7010.01H
The SPL is 1.06 and IPL is 1.01. I have no idea how to check the HTC_BOOT version.
There is an Orange boot logo.
Guess that is. Thanks once again
knfevg said:
1. How do I check the htc_boot version? I have the 106 SPL so I can’t launch the Radio loader from there....
Click to expand...
Click to collapse
You should use a SPL based on 1.01 or 1.04 to use 'rtask' and access the radio, you can either flash it or use SSPL to load the NB without flashing. Anyway you don't need to do that, radio 1.03.03.10 has htc_boot 0106.
knfevg said:
2. If I dumped only the OS part I guess I should dump the rest too. How do I do that and how do I make the "burnable" afterwards?
Click to expand...
Click to collapse
You don't need to dump the rest. See later.
knfevg said:
3. Here is the current "setup":
HERM200 Orange IL HTC TyTN Israel QWERTY Locked OS 5.1.195 (Build 14955.2.3.0) 1.18.255.3 07/22/06 WWE 1.18.255.112 1.03.03.10 32.34.7010.01H
The SPL is 1.06 and IPL is 1.01.
There is an Orange boot logo.
Click to expand...
Click to collapse
A full shipped NBH consists on 7 parts: IPL, SPL, MainSplash, SubSplash, Radio, ExtROM and OS.
See the hermes shipped upgrades wiki page. Use nbhextract to separate the NBH into rom parts.
Download any orange ROM to get your MainSplash.nb & SubSplash.nb (boot logo as you say).
Download any rom with IPL-1.01 & SPL-1.06 to get IPL.nb & SPL.nb
Download any rom with radio 1.03.03.10 to get GSM.nb
Unhide your ExtROM to get the files in Extended ROM, then create ExtROM.nb using ExtROM image editor.
Reconstruct the OS.nb using the instructions on wiki (see trinity wiki also)
Finally, create a NBH using nbhgen, and package it with CustomRUU to be able to flash it pushing SSPL.
Make sure you don't upgrade to any radio with htc_boot 0108, otherwise you'll never be able to flash your original radio again.
Hope it's clear
Thanks POF. PERFECT!!!!
Maybe a Wiki should be made for this as I notice alot of people asking on how to go back to the original state of their device?
tnx in advance
sir POF i did want to get the original state of my device for warranty purpose..
I tried everything i can.. i read a lot.. still confusing me.. I did encountered No GSM, the phone dont boot..
I run WM6 Cooked rom before..
heres my device now...
Dopod 838 pro Asia
ORIGINAL
ROM 1.23.707.4
07/21/06 WM5
RADIO 1.06.00.10
PROTOCOL 32.37.7010.01H
OS BUILD 14955.2.3.0
AKU 2.3
SPL 1.04
HTC BOOT 106
IPL ?
NOW RUNNING
WM5
ROM 1.23.707.4
07/21/06
RADIO 1.40.30.00
32.73.7020.16H
OS BUILD 14955.2.3.0
SPL OLIPRO 2.10
IPL 1.04
AKU ?
HTC BOOT ? dnt know if it changed
Ive read ur message.. I just want a simple question...
BASED on the data above is it possible to bring back the device on its
original state specially the radio and SPL ?
TNX in advance..
Im willing to research again if yes..
I have SPL - 2.10 Olipro. I am trying the various Boot Roms starting from 1.41 backwards as someone recommended in some other thread.
But I need to run SSPL before or I get an Error why does that happen why can't the SSPL of the ROM upgrade check and do the needful.
Secondly I want to revert back to SPL-1.04 or 1.09 is it possible. If yes please tell me how. If it is detailed in some other thread please tell me the thread details and oblige.
THANKS IN ADVANCE.
tonetagabaler said:
BASED on the data above is it possible to bring back the device on its original state specially the radio and SPL ?
Click to expand...
Click to collapse
Radio no (you cant go back from htc_boot 0108 to 0106), SPL and rest of rom parts yes, it's possible to return to original state.
hsanghavi said:
I want to revert back to SPL-1.04 or 1.09 is it possible. If yes please tell me how. If it is detailed in some other thread please tell me the thread details and oblige.
Click to expand...
Click to collapse
Read the HardSPL sticky thread.
I tired but could not locate the Hard SPL thread can you please tell me where to find it.
THANKS.
Hi guys I need to downgrade for warranty reasons (Vibrate stopped working)
I have been looking through mrvanx guide and it mentions
"SPL 1.04 (includes IPL 1.00) SPL 1.06 (includes IPL 1.01)"
The thing is my SPL was 1.04 and IPL 1.01 which seems to be a mix of the above !
my Radio version 1.05.05.00 but this is also not on the wiki.
Here are my phone details before
IPL-1.01
SPL-1.04
Rom version 1.21.110.3
Rom date 06/19/06
Radio version 1.05.05.00
protocol version 32.36.7010.04H
Will I need to get the exact same radio and rom version with rom date
or you think its possible they will over look these details aslong as WM5 and an early radio rom is flashed?
Thanks for any advice, Chris.
I really doubt that they would catch it as long as you have wm5. But, if they do, then just play dumb or try another store.
Thanks, I'll try that is there any risks when downgrading or uninstall HardSPL v7 ?
Once my phone had SPL 1.04 on it (after downgrading via MrVanx's method), I flashed the official rom from my carrier, and it returned me to the factory settings. One note, my phone is super CID.
The only T Mobile WM5 rom I can see is the Hungarian one in this thread http://forum.xda-developers.com/showthread.php?t=287338
will this one be ok for t mobile uk ?
The one from hungary is the only t-mob WM5 i know of. You can also search for a dumped one and reconstruct it.
one note: do not flash radio with htc_boot less than 0107 or you'll brick it, as for your signature you have htc_boot 0108 now.
pof said:
The one from hungary is the only t-mob WM5 i know of. You can also search for a dumped one and reconstruct it.
one note: do not flash radio with htc_boot less than 0107 or you'll brick it, as for your signature you have htc_boot 0108 now.
Click to expand...
Click to collapse
Thanks for the advice I will deffentley do alot of reading before I downgrade.
So htc_boot less than 0107, does that mean 0107 are ok nothing lower or stick with htc_boot 0108 ?
I have no idea how to reconstruct a dumped rom so ill have to flash the hungay one.
0107 is ok, but nothing lower. To reconstruct a dumped rom, read the wiki
I Know i am being noobish,but to learn more i need to put questions like this to you guys.Hope that i will get sufficient help from you guys.
I need to downgrade to imate full shipped wm5 rom for some reason.I have selected the rom i wish to download.
i-mate English CDL__001 1.31.305.2 09/08/06 1.31.305.104 1.38.30.10 32.71.7020.12H 14955.2.3.0 2.3 1.11 108
I am currently using Olipro Hard spl V7 with TnT rom and 1.54 radio varient.
I wish to do full degrade,rom as well as radio.
Any Body guide me through this tricky process,i consulted mr.vanx guides but that degrades only the os part but i want a full degrade.
mrvanx's guide for downgrad is quite straightforward. If you look at it, you should understand that by dowgrading 2.10.Olipro to 1.10.Olipro, you will have a base which will allow itself to be downgraded to shipped SPL. Forget doing anything with radio or OS at this point, you don't need to.
AFTER you have 1.10.Olipro visualy CONFIRMED on the BL screen, flash your desired ROM. Make sure, your radio BL is 108 ( which it seems).
OK ,
1- I should degrade 2.10 olipro to 1.10 olipro
2-I just flash the shipped wm5 rom i downloaded
Am i right?
max414 said:
OK ,
1- I should degrade 2.10 olipro to 1.10 olipro
2-I just flash the shipped wm5 rom i downloaded
Am i right?
Click to expand...
Click to collapse
That will do it.
Will that degrade my radio as well as spl?
max414 said:
Will that degrade my radio as well as spl?
Click to expand...
Click to collapse
It will. Just make sure that the radio BL version is the same (108 I believe). From other posts and Wiki, you can read that you can downgrade radio BL from 108 to 107 but NOT BELOW THAT. Or you will brick your phone. So I would recomend staying with BL 108. Anything up from 1.33 based on the wiki list.
rronge said:
It will. Just make sure that the radio BL version is the same (108 I believe). From other posts and Wiki, you can read that you can downgrade radio BL from 108 to 107 but NOT BELOW THAT. Or you will brick your phone. So I would recomend staying with BL 108. Anything up from 1.33 based on the wiki list.
Click to expand...
Click to collapse
Will 1.10 olipro do the job?or do i need to degrade to retail spl like spl 1.04 or spl 1.06?As stated here...
http://www.mrvanx.org/cms/index.php?option=com_content&task=view&id=59&Itemid=27
max414 said:
Will 1.10 olipro do the job?or do i need to degrade to retail spl like spl 1.04 or spl 1.06?As stated here...
http://www.mrvanx.org/cms/index.php?option=com_content&task=view&id=59&Itemid=27
Click to expand...
Click to collapse
As I said in post #2, you don't need to. Flashing shipped on top of 1.10.Olipro WILL reflash the SPL! Read it again.
I upgraded my QTEK s200 to bikertibi version 23071 full using bikertibi Prophet_Upgrade
I first tried to use SoftSPL but when it didn't work I used bikertibi tool to perform HardSPL
The upgrade went OK and I tried this version for a short time.
Because there is not much ram available I wanted to change to a different version
Every other version I tried ended up in the Bootloader screen (3 colors) after rebooting at the end of burn sequence.
Current version of SPL is:
IPL 2.09
SPL 2.20
I can go back to the original WM5 version I got RUU_Prophet_220734_2207114_024721_QTEK_WWE_Ship
but after that I cannot burn any WM6.5 version
Any help is appreciated
Moti
moti1010 said:
IPL 2.09
SPL 2.20
Click to expand...
Click to collapse
SPL: 2.09 ===>Hard SPL has not been performed.
So, simply perform it again, using bikertibi's tool or others in the forum.
You can use every ROM after that, (When you have SPL: 2.G4.4PDA)
babak00000 said:
(When you have SPL: 2.G4.4PDA)
Click to expand...
Click to collapse
Thats assuming moti1010 has a G4 device.. Go here to find out what you have
http://wiki.xda-developers.com/index.php?pagename=prophet_g3g4_how
Please read the wiki fully before flashing roms moti1010.. Its the safest way to prevent problems or panics if a problem does occur as most solutions are already posted in the Prophet Wiki
joolay said:
Thats assuming moti1010 has a G4 device.. Go here to find out what you have
http://wiki.xda-developers.com/index.php?pagename=prophet_g3g4_how
Please read the wiki fully before flashing roms moti1010.. Its the safest way to prevent problems or panics if a problem does occur as most solutions are already posted in the Prophet Wiki
Click to expand...
Click to collapse
When you have SPL: 2.G4.4PDA
Click to expand...
Click to collapse
SPL: 2.G4.4PDA or SPL: 2.G3.4PDA
Thanks Joolay for your accuracy
Thank's for the help.
I later succeeded in performing Soft SPL and burning a new ROM
Moti