I upgraded my QTEK s200 to bikertibi version 23071 full using bikertibi Prophet_Upgrade
I first tried to use SoftSPL but when it didn't work I used bikertibi tool to perform HardSPL
The upgrade went OK and I tried this version for a short time.
Because there is not much ram available I wanted to change to a different version
Every other version I tried ended up in the Bootloader screen (3 colors) after rebooting at the end of burn sequence.
Current version of SPL is:
IPL 2.09
SPL 2.20
I can go back to the original WM5 version I got RUU_Prophet_220734_2207114_024721_QTEK_WWE_Ship
but after that I cannot burn any WM6.5 version
Any help is appreciated
Moti
moti1010 said:
IPL 2.09
SPL 2.20
Click to expand...
Click to collapse
SPL: 2.09 ===>Hard SPL has not been performed.
So, simply perform it again, using bikertibi's tool or others in the forum.
You can use every ROM after that, (When you have SPL: 2.G4.4PDA)
babak00000 said:
(When you have SPL: 2.G4.4PDA)
Click to expand...
Click to collapse
Thats assuming moti1010 has a G4 device.. Go here to find out what you have
http://wiki.xda-developers.com/index.php?pagename=prophet_g3g4_how
Please read the wiki fully before flashing roms moti1010.. Its the safest way to prevent problems or panics if a problem does occur as most solutions are already posted in the Prophet Wiki
joolay said:
Thats assuming moti1010 has a G4 device.. Go here to find out what you have
http://wiki.xda-developers.com/index.php?pagename=prophet_g3g4_how
Please read the wiki fully before flashing roms moti1010.. Its the safest way to prevent problems or panics if a problem does occur as most solutions are already posted in the Prophet Wiki
Click to expand...
Click to collapse
When you have SPL: 2.G4.4PDA
Click to expand...
Click to collapse
SPL: 2.G4.4PDA or SPL: 2.G3.4PDA
Thanks Joolay for your accuracy
Thank's for the help.
I later succeeded in performing Soft SPL and burning a new ROM
Moti
Related
Hi all
reading some signatures of someone on this forum I've read that there is a version 1.04 of the Ipl.
I have the 1.01, exactly what changes between the two different versions? and how I can improve to 1.04?
cabi.costa said:
Hi all
reading some signatures of someone on this forum I've read that there is a version 1.04 of the Ipl.
I have the 1.01, exactly what changes between the two different versions? and how I can improve to 1.04?
Click to expand...
Click to collapse
Put Hard-SPL v.7 on your device and you will get it.
Just done but results are unpleasantly SPL v2.10 Olipro and IPL v1.01
cabi.costa said:
Just done but results are unpleasantly SPL v2.10 Olipro and IPL v1.01
Click to expand...
Click to collapse
Why is that unpleasant? (they are better than 1.04 for all normal users)
Agree with Joedoe and Sambartle; just use Hard SPL v7 and it takes care of the bootloader for you. Don't need to do anything else.
Guys this user is talking about IPL...not SPL...
If you follow my HardSPL install guide...you will have IPL 1.04 once it is complete.
what changes from 1.01? why an user some post before says that is better 1.01?however thank you vanx i've just flashed my phone with your guide and it's fantastic..
mrvanx said:
Guys this user is talking about IPL...not SPL...
Click to expand...
Click to collapse
Doesn't flashing hardspl do both though?
mrvanx said:
Guys this user is talking about IPL...not SPL...
If you follow my HardSPL install guide...you will have IPL 1.04 once it is complete.
Click to expand...
Click to collapse
Hello Mrvanx,
Your install guide appears OK for my Softbank X01HT with the following information. Please confirm.
Do I need to upgrade the Radio Rom before upgrading to WM6
IPL 1.01
SPL 1.09
ROM ver. 1.23.708.4
ROM date 07/24/06
Radio ver 1.06.00.10
Comm Protocl ver 32.37.7010.01W
Best Regards
Ken
Yes you need it and before did everything flash the booloader with the HardSplV7..and there's a 1.48.00.00 radio out now..
So someone could tell me the differences between an IPL 1.01 and IPL 1.04?
So no-one could tell me what are the differences between an IPL 1.01 and IPL 1.04?
Hello,
I have got G4 Qtek S200 (HTC Prophet) CIDLOCKED
-----------------------
IPL : 2.20.0001
SPL: 2.20.0001
GSM: 02.47.21
OS: 2.20.7.34
-----------------------
My question very clear:
*** I want to downgrade IPL/SPL ***
Is this possible ?
Thanks advance..
Hello!
Read the Wiki:
It is not possible to upgrade from a G3 model to a G4 model through software, as the DOC is a piece of Hardware.
Click to expand...
Click to collapse
greetz Ben
Not from G3 to G4
Hello,
I guess you wrong understand me.
I dont want to upgrade my device from G3 model to G4.
Or i dont want to downgrade from G4 model to G3.
Already my device G4 and only i want to downgrade my IPL/SPL.
And i am asking how can i downgrade my IPL/SPL from 2.20.0001 to other minor IPL/SPL version.
Is this possible? What i must do?
Thanks...
It is not possible to upgrade from a G3 model to a G4 model through software, as the DOC is a piece of Hardware.
Click to expand...
Click to collapse
Its a piece of hardware, whatever the Gen you can't up or downgrade it! use your head and think about it!
loverbadi said:
Hello,
I guess you wrong understand me.
I dont want to upgrade my device from G3 model to G4.
Or i dont want to downgrade from G4 model to G3.
Already my device G4 and only i want to downgrade my IPL/SPL.
And i am asking how can i downgrade my IPL/SPL from 2.20.0001 to other minor IPL/SPL version.
Is this possible? What i must do?
Thanks...
Click to expand...
Click to collapse
I do think there's some people that don't understand english...
What loverbadi need to know concerns IPL/SPL versions, that are update by software.
What identifies G3 from G4 it's the last 4 digits (numbers) at the end of IPL/SPL version.
The first digits identifies the IPL/SPL version...
He needs to now how can he upgrade or downgrade this version, not to upgrade from a G3 device to G4...
Try to learn english language to read well what is write at this forum...
loverbadi said:
Hello,
I have got G4 Qtek S200 (HTC Prophet) CIDLOCKED
-----------------------
IPL : 2.20.0001
SPL: 2.20.0001
GSM: 02.47.21
OS: 2.20.7.34
-----------------------
My question very clear:
*** I want to downgrade IPL/SPL ***
Is this possible ?
Thanks advance..
Click to expand...
Click to collapse
yes it is possible,why do you want to downgrade them? 2.20 is the latest official version?
Hi guys
I thought i had a bricked Imate Jammin .. in bootloader mode ..so i used Qtec RUU to flash my phone ... and it started working ofcourse with lots of searching and help from this forum ....
Previously my phone IPL and SPL were 2.13 but after writting ROM phone works fine but IPL is still 2.13 and SPL 2.20 so i am really confused .. Also is it possible now to flash it with Imate Jammin software of the same version .. be it 2.13 or 2.20
If yes please guide me to the right software ,,, I am truly a noob
thanks
Mike
Lastest IPL/SPL is 2.58 ... you can found on a TC-500.
NOW it is possible to downgrade SPL. Just flash HardSPL, after that you can DOWNGRADE SPL to any SPL you want!!!
nForce said:
NOW it is possible to downgrade SPL. Just flash HardSPL, after that you can DOWNGRADE SPL to any SPL you want!!!
Click to expand...
Click to collapse
How? Can you explain a little bit more?
help
mun66 said:
Hi guys
I thought i had a bricked Imate Jammin .. in bootloader mode ..so i used Qtec RUU to flash my phone ... and it started working ofcourse with lots of searching and help from this forum ....
Previously my phone IPL and SPL were 2.13 but after writting ROM phone works fine but IPL is still 2.13 and SPL 2.20 so i am really confused .. Also is it possible now to flash it with Imate Jammin software of the same version .. be it 2.13 or 2.20
If yes please guide me to the right software ,,, I am truly a noob
thanks
Mike
Click to expand...
Click to collapse
my prophet is still dead
can you help me
my spl 2.20
my ipl 2.20.0001
usb connects but all rom that i tryed dont boot
please help on reviving this little device
thanks
my prophet is still dead
can you help me
my spl 2.20
my ipl 2.20.0001
usb connects but all rom that i tryed dont boot
please help on reviving this little device
thanks
tiago.ad.correia(at)gmail.com
flash with original provider rom if cid is locked !!!
then make hardspl.
br stupsi
Hello could somebody post the latest SPL & IPL for G4?
Thanks!
i don't suggest to play around with IPL and SPL , if you make a mistake you can brick your device forever.
here is the link you want :
http://forum.xda-developers.com/showthread.php?t=315016
once again , if you like your phone and you want to keep it and use it , don't play around with these two. specially IPL.
Lastest IPL/SPL is 2.58.0001 and can found on a T-Com TC-500 Prophet.
NetrunnerAT said:
Lastest IPL/SPL is 2.58.0001 and can found on a T-Com TC-500 Prophet.
Click to expand...
Click to collapse
and where can i find this?
Hi everybody.
I'm about to upgrade my O2 XDA G4 from WM5 to WM6. I bought this neo on ebay and I don't know if it has already been HardSPled. Is there any chance to know - or - can the HardSPL procedure run again without creating problems?
Are the Radio, the IPL and SPL upgraded as well using one of the last WM6 rom or they should be upgraded manually? Do you recommend to upgrade also IPL/SPL/Radio?
Many thanks
The way to tell if it has been HardSPLed is to see the SPL number.
if it is 2.G3.4PDA or 2.G4.4PDA it has been hard SPLed if not, you will need to do it.
Generally, radio ROMs and IPL/SPL are best left alone (other than SPL for HardSPL).
Thanks for your quick quick reply. I have the following numbers:
IPL 2.15.001
SPL 2.15.001
GSM 02.30.21
OS 2.13.9.21 ITA
So I think I have a "2.G4.4PDA". BTW, while I can understand what 2.G4 means, I have no clue about 4PDA... Can you help?
Thanks again
D.
The numbers themselves (2.G4.4PDA) are meaningless... I think it is 2 (the SPL version) G4 (the device version) 4PDA (sounds like "for PDA").
You will need to HardSPL first, using G4 HardSPL as your device is a G4, then you can flash a ROM.
Done.
Thanks for your support. Now I have the following:
IPL 2.15.001
SPL 2.G4.4PDA
GSM 02.30.21
OS 2.13.9.21 ITA
Now you can flash a ROM.
Well, this is soo strange. The problem is this:
1- I upgraded to Shato Touch 1.0 (WM6) before.. Worked fine
2- I decided to upgrade to Wm6.1 - Cloudyfa Touch Edition 2.0, so i did a clean PVTemp install and now i have
IPL: 2.13.0001
SPL: 2.20.0001
Rom Version: Qtek 2.20.7.34 WWE
Radio Version: 02.47.21
Extrom: 2.20.7.114
4- Now the problem: Ive tried every tool on the forums. Every tool to Hard SPL it. Everytime it just reboots after all process, and the IPL / SPL numbers stay the same. As i figure from the forums: they should turn to 2.G4.4PDA or 2.24.opil, But they remain the same?
Please tell me what to do? I mean i really want to upgrade to 6.1, but icant fugire out what s the problem
c0d3r said:
Well, this is soo strange. The problem is this:
1- I upgraded to Shato Touch 1.0 (WM6) before.. Worked fine
2- I decided to upgrade to Wm6.1 - Cloudyfa Touch Edition 2.0, so i did a clean PVTemp install and now i have
IPL: 2.13.0001
SPL: 2.20.0001
Rom Version: Qtek 2.20.7.34 WWE
Radio Version: 02.47.21
Extrom: 2.20.7.114
4- Now the problem: Ive tried every tool on the forums. Every tool to Hard SPL it. Everytime it just reboots after all process, and the IPL / SPL numbers stay the same. As i figure from the forums: they should turn to 2.G4.4PDA or 2.24.opil, But they remain the same?
Please tell me what to do? I mean i really want to upgrade to 6.1, but icant fugire out what s the problem
Click to expand...
Click to collapse
................go for 1d, no hardspl is required.
haha! Ive been trying to hard spl for abt 1 month now.. with breaks of course, whenever i got time... but as soon as i posted it, it worked!
I ran the hardspl.bat in the Upgrade_HardSPL_G4 folder... not the nvrom setup.
ANd it worked! Its showing 2.0.G4.4pda .. and i just installed wmtouch 2.0 edition (cloudyfa ).
Well, this is a odd, but thanx a bundle Ill do the 1d method when i plan to change roms again