Hi everybody.
I'm about to upgrade my O2 XDA G4 from WM5 to WM6. I bought this neo on ebay and I don't know if it has already been HardSPled. Is there any chance to know - or - can the HardSPL procedure run again without creating problems?
Are the Radio, the IPL and SPL upgraded as well using one of the last WM6 rom or they should be upgraded manually? Do you recommend to upgrade also IPL/SPL/Radio?
Many thanks
The way to tell if it has been HardSPLed is to see the SPL number.
if it is 2.G3.4PDA or 2.G4.4PDA it has been hard SPLed if not, you will need to do it.
Generally, radio ROMs and IPL/SPL are best left alone (other than SPL for HardSPL).
Thanks for your quick quick reply. I have the following numbers:
IPL 2.15.001
SPL 2.15.001
GSM 02.30.21
OS 2.13.9.21 ITA
So I think I have a "2.G4.4PDA". BTW, while I can understand what 2.G4 means, I have no clue about 4PDA... Can you help?
Thanks again
D.
The numbers themselves (2.G4.4PDA) are meaningless... I think it is 2 (the SPL version) G4 (the device version) 4PDA (sounds like "for PDA").
You will need to HardSPL first, using G4 HardSPL as your device is a G4, then you can flash a ROM.
Done.
Thanks for your support. Now I have the following:
IPL 2.15.001
SPL 2.G4.4PDA
GSM 02.30.21
OS 2.13.9.21 ITA
Now you can flash a ROM.
Related
Please find below the infomation of my softbank X01HT which I bought few days ago. The softbank has been unlocked by the shop and is running traditional Chinese on WM5.
IPL 1.01
SPL 1.09
ROM Ver 1.23.708.4
ROM Date 07/24/06
Radio 1.06.00.10
Comm Protocol 32.37.7010.01W
Please advise if it is safe to run HARDSPL for upgrading to WM6.
Will there be any adverse/damaging effect?
Do I need to downgrade the ROM version before running HARDSPL V7.
Please advise the procedure.
Thank you in advance
Ken
Isi
I believe you can just put it into bootloader mode and flash the WM6 Dopod ROM. A friend of mine did this recently.
i hv just done it. i did not encounter any major problem except after flashing it with the official ROM, the storage memory is very low ....
KENPPCPHONE said:
Please find below the infomation of my softbank X01HT which I bought few days ago. The softbank has been unlocked by the shop and is running traditional Chinese on WM5.
IPL 1.01
SPL 1.09
ROM Ver 1.23.708.4
ROM Date 07/24/06
Radio 1.06.00.10
Comm Protocol 32.37.7010.01W
Please advise if it is safe to run HARDSPL for upgrading to WM6.
Will there be any adverse/damaging effect?
Do I need to downgrade the ROM version before running HARDSPL V7.
Please advise the procedure.
Thank you in advance
Ken
Isi
Click to expand...
Click to collapse
yes it is safe... but you need an activesync partner ship setup to installl HardSPL as it needs to push SSPL to your device... for more information read www.mrvanx.org
Zilch said:
I believe you can just put it into bootloader mode and flash the WM6 Dopod ROM. A friend of mine did this recently.
Click to expand...
Click to collapse
with updating/installing HardSPL the device needs to be in Windows with activesync connected so SSPL can be pushed to the device...
I trid to install HardSPL Version 7 (2.10.olipro).
I activesync connected and run RUUWraper.exe
I go through all the selection right and on the last page after I click "next" I press yes on my Softbank. but the flash download didn't started and the Softbank reset and go into the engineering mode where I still see :
IPL- SSPL Des
SPL-1.09.ds
All my versions are the same as Ken which are:
IPL 1.01
SPL 1.09
ROM Ver 1.23.708.4
ROM Date 07/24/06
Radio 1.06.00.10
Comm Protocol 32.37.7010.01W
Could anyone advise any solution in proceed with HardSPL installation?
Thanks a lot
Henry
Hi Conorau,
Following the procedure in this forum, my softbank successfully upgrade to WM6 without any problem. Good luck
Ken
IPL 1.04
SPL 2.10.01 olipro
ROM Ver 3.54.708.2
ROM Date 07/05/07
Radio 1.47.00.10
Comm Protocol 32.80.7020.20H
here is solution
I think it usefull !
http://bestsolution.spaces.live.com/Blog/cns!E39312F16E0FBE41!728.entry
and more infomation http://forum.xda-developers.com/forumdisplay.php?f=355
KEN can you tell me exectly what you did? i also want to upgrade my phone
is it ok for my phone to to according to this FAQhttp://wiki.xda-developers.com/index.php?pagename=Hermes_UpgradeGuide + take this ROM http://forum.xda-developers.com/showthread.php?t=321332
please help!
Hello,
I have got G4 Qtek S200 (HTC Prophet) CIDLOCKED
-----------------------
IPL : 2.20.0001
SPL: 2.20.0001
GSM: 02.47.21
OS: 2.20.7.34
-----------------------
My question very clear:
*** I want to downgrade IPL/SPL ***
Is this possible ?
Thanks advance..
Hello!
Read the Wiki:
It is not possible to upgrade from a G3 model to a G4 model through software, as the DOC is a piece of Hardware.
Click to expand...
Click to collapse
greetz Ben
Not from G3 to G4
Hello,
I guess you wrong understand me.
I dont want to upgrade my device from G3 model to G4.
Or i dont want to downgrade from G4 model to G3.
Already my device G4 and only i want to downgrade my IPL/SPL.
And i am asking how can i downgrade my IPL/SPL from 2.20.0001 to other minor IPL/SPL version.
Is this possible? What i must do?
Thanks...
It is not possible to upgrade from a G3 model to a G4 model through software, as the DOC is a piece of Hardware.
Click to expand...
Click to collapse
Its a piece of hardware, whatever the Gen you can't up or downgrade it! use your head and think about it!
loverbadi said:
Hello,
I guess you wrong understand me.
I dont want to upgrade my device from G3 model to G4.
Or i dont want to downgrade from G4 model to G3.
Already my device G4 and only i want to downgrade my IPL/SPL.
And i am asking how can i downgrade my IPL/SPL from 2.20.0001 to other minor IPL/SPL version.
Is this possible? What i must do?
Thanks...
Click to expand...
Click to collapse
I do think there's some people that don't understand english...
What loverbadi need to know concerns IPL/SPL versions, that are update by software.
What identifies G3 from G4 it's the last 4 digits (numbers) at the end of IPL/SPL version.
The first digits identifies the IPL/SPL version...
He needs to now how can he upgrade or downgrade this version, not to upgrade from a G3 device to G4...
Try to learn english language to read well what is write at this forum...
loverbadi said:
Hello,
I have got G4 Qtek S200 (HTC Prophet) CIDLOCKED
-----------------------
IPL : 2.20.0001
SPL: 2.20.0001
GSM: 02.47.21
OS: 2.20.7.34
-----------------------
My question very clear:
*** I want to downgrade IPL/SPL ***
Is this possible ?
Thanks advance..
Click to expand...
Click to collapse
yes it is possible,why do you want to downgrade them? 2.20 is the latest official version?
Hi guys
I thought i had a bricked Imate Jammin .. in bootloader mode ..so i used Qtec RUU to flash my phone ... and it started working ofcourse with lots of searching and help from this forum ....
Previously my phone IPL and SPL were 2.13 but after writting ROM phone works fine but IPL is still 2.13 and SPL 2.20 so i am really confused .. Also is it possible now to flash it with Imate Jammin software of the same version .. be it 2.13 or 2.20
If yes please guide me to the right software ,,, I am truly a noob
thanks
Mike
Lastest IPL/SPL is 2.58 ... you can found on a TC-500.
NOW it is possible to downgrade SPL. Just flash HardSPL, after that you can DOWNGRADE SPL to any SPL you want!!!
nForce said:
NOW it is possible to downgrade SPL. Just flash HardSPL, after that you can DOWNGRADE SPL to any SPL you want!!!
Click to expand...
Click to collapse
How? Can you explain a little bit more?
help
mun66 said:
Hi guys
I thought i had a bricked Imate Jammin .. in bootloader mode ..so i used Qtec RUU to flash my phone ... and it started working ofcourse with lots of searching and help from this forum ....
Previously my phone IPL and SPL were 2.13 but after writting ROM phone works fine but IPL is still 2.13 and SPL 2.20 so i am really confused .. Also is it possible now to flash it with Imate Jammin software of the same version .. be it 2.13 or 2.20
If yes please guide me to the right software ,,, I am truly a noob
thanks
Mike
Click to expand...
Click to collapse
my prophet is still dead
can you help me
my spl 2.20
my ipl 2.20.0001
usb connects but all rom that i tryed dont boot
please help on reviving this little device
thanks
my prophet is still dead
can you help me
my spl 2.20
my ipl 2.20.0001
usb connects but all rom that i tryed dont boot
please help on reviving this little device
thanks
tiago.ad.correia(at)gmail.com
flash with original provider rom if cid is locked !!!
then make hardspl.
br stupsi
Hello;
I would like to return to the originel IPL /SPL for the K-jam G4, I find some originel IPL/SPL in the forum but I did not found the originel of the K-jam.
Any idea !
________________________
IPL: 2.21.0001 (G4 device)
SPL: 2.21.Olip (G4 device w/ HardSPL)
Built on Aug 26 2007 at 19:41:34
Copyright (c) 2007 Olipro & HTC - Hard-SPL
=> Firmware:
OS: 5.2.xxx (Build 19199.1.0.0) SNN WM 6.1
ROM: 2.18
Registry AKU: .1.0.0
Radio: 02.25.11
Protocol: 4.1.13.12
essultane said:
Hello;
I would like to return to the originel IPL /SPL for the K-jam G4, I find some originel IPL/SPL in the forum but I did not found the originel of the K-jam.
Any idea !
________________________
IPL: 2.21.0001 (G4 device)
SPL: 2.21.Olip (G4 device w/ HardSPL)
Built on Aug 26 2007 at 19:41:34
Copyright (c) 2007 Olipro & HTC - Hard-SPL
=> Firmware:
OS: 5.2.xxx (Build 19199.1.0.0) SNN WM 6.1
ROM: 2.18
Registry AKU: .1.0.0
Radio: 02.25.11
Protocol: 4.1.13.12
Click to expand...
Click to collapse
Just follow the method explained in the guide 'How to remove HardSPL' and you can use any Official IPL/SPL to flash back to G4 ipl/spl and download the official k-jam stock rom and flash to revert back to wm5.
OK for removing HardSPL but rom upgrade not possible.
thanks for your reply.
I succed to remove the Hard SPL but putting Vodafone IPL/SPL, the K-jam reboot after normally and showing :
IPL 2.17.0001
SPL 2.17.0001
but upgrade with originel K-jam rom is not possible.
I succed to have the The colored screen but RUU show this error ;
____________________________________________________________
ERROR [296] upgrade only the nbf can not be used for your pda phone
please get newer nbf file.
____________________________________________________________
please advise.
i want remove hardspl & want to restore original what was there!
-i read your thread How To: Remove HardSPL
http://forum.xda-developers.com/showthread.php?t=342744
-now fact is that i didnt buy kjam(wizard device) from any operator.
in india you have two type of mobile
one which are with operator (called cdma)
other which u can buy from market & insert any sim into it.
mine is 2nd device (which u can buy from market & insert any sim into it.)
-orginally hardspl was 2.16.0001
i want to restore it back it imate kjam!!!
i have downloaded rom from imate site also!!! but i tried to installed it failed as my hardspl is like:-
The IPL version 2.21.0001 and the SPL 2.21.olip
-so question is that in your post How To: Remove HardSPL do i need to download any of below said things
what should i replace in .nbf file as none of attachment belongs to be.
pls answer soon as i have only 1 week left in my waranty period of repair/replacemant!!
i cant find G4 IPL&SPL for my k-jam on that page what do i must to do????whare can iafind it please help me soon.
mp1368 said:
i cant find G4 IPL&SPL for my k-jam on that page what do i must to do????whare can iafind it please help me soon.
Click to expand...
Click to collapse
I know it's late now and this is more of a warning, but people should make IPL/SPL backup with WST before applying the HardSPL because they can be used later on to restore the phone to original condition. I have done it myself with a friend's G4.
Hello! I have a Qtek 9100 and I've managed to update to WM6.1 and now I'd prefer WM 5 witch I like more and I didn't managed to downgrade maybe someone can explain as simple as possible ... i think my phone is G4
IPL: 2.21.0001
SPL: 2.21.0lip
malexino said:
Hello! I have a Qtek 9100 and I've managed to update to WM6.1 and now I'd prefer WM 5 witch I like more and I didn't managed to downgrade maybe someone can explain as simple as possible ... i think my phone is G4
IPL: 2.21.0001
SPL: 2.21.0lip
Click to expand...
Click to collapse
First you need to remove 'HardSPL',revert back to official carrier's IPL/SPL and then flash back the official carrier's rom,follow the link below for complete guidance:-
http://forum.xda-developers.com/showthread.php?t=342744
Thanks
Thank you! I managed to downgrade ...
I upgraded my QTEK s200 to bikertibi version 23071 full using bikertibi Prophet_Upgrade
I first tried to use SoftSPL but when it didn't work I used bikertibi tool to perform HardSPL
The upgrade went OK and I tried this version for a short time.
Because there is not much ram available I wanted to change to a different version
Every other version I tried ended up in the Bootloader screen (3 colors) after rebooting at the end of burn sequence.
Current version of SPL is:
IPL 2.09
SPL 2.20
I can go back to the original WM5 version I got RUU_Prophet_220734_2207114_024721_QTEK_WWE_Ship
but after that I cannot burn any WM6.5 version
Any help is appreciated
Moti
moti1010 said:
IPL 2.09
SPL 2.20
Click to expand...
Click to collapse
SPL: 2.09 ===>Hard SPL has not been performed.
So, simply perform it again, using bikertibi's tool or others in the forum.
You can use every ROM after that, (When you have SPL: 2.G4.4PDA)
babak00000 said:
(When you have SPL: 2.G4.4PDA)
Click to expand...
Click to collapse
Thats assuming moti1010 has a G4 device.. Go here to find out what you have
http://wiki.xda-developers.com/index.php?pagename=prophet_g3g4_how
Please read the wiki fully before flashing roms moti1010.. Its the safest way to prevent problems or panics if a problem does occur as most solutions are already posted in the Prophet Wiki
joolay said:
Thats assuming moti1010 has a G4 device.. Go here to find out what you have
http://wiki.xda-developers.com/index.php?pagename=prophet_g3g4_how
Please read the wiki fully before flashing roms moti1010.. Its the safest way to prevent problems or panics if a problem does occur as most solutions are already posted in the Prophet Wiki
Click to expand...
Click to collapse
When you have SPL: 2.G4.4PDA
Click to expand...
Click to collapse
SPL: 2.G4.4PDA or SPL: 2.G3.4PDA
Thanks Joolay for your accuracy
Thank's for the help.
I later succeeded in performing Soft SPL and burning a new ROM
Moti