Related
1. Go to Google, search for DownGrade_SPL.rar
2. Connect your tytn to PC and wait until activesync completed.
3. Run M3100v3cUnlock.exe. Once you see checking device.... in DOS box and whilte screen on your tytn, close the program (Dos box) immedaitely.
4. Run ROMUpgradeUt.exe and follow the japanese wizard to complete the boot loader downgrade.
5. Reboot your tytn and then put it into bootloader mode agian, you should see SPL-1.04. Great!
6. Download pof's HTC_Hermes_SIM_Unlock_v2a from
ftp://xda:[email protected]/Hermes/Tools_and_Programs/HTC_Hermes_SIM_Unlock_v2a.zip
7. Flash the patched radio rom 1.16, then Reboot.
8. Copy HERM_Unlock_v2a.exe a small PPC app pof wrote into your TYTN memory.
9. Open File Explorer, run HERM_Unlock_v2a.exe on your TYTN and wait about 1 minute until it shows up a completed message. Reboot again!
10. Download mtty.exe from
http://wiki.xda-developers.com/uploads/mtty.exe
11. Disable ActiveSync, and then run mtty.exe, choose usb connection; Enter. You should see USB> prompt. Type in: info 2 . When you see 00000000 or SuperCID string. You are safe and ready to upgrade to the latest TYTN 1.35 Rom with bootloader 1.09.
Anybody tried this?
These are what I did on my Vodafone V1605 with bl 1.06. Guarantee working. Actually, this's not a new solution. It exists long time ago, but pof remove this file from wiki due to license issue. Some chinese fans downloaded this file before and shared on their forum. I hope pof won't remove this thread since the Downgrade file is from another website.
arcivanov said:
Anybody tried this?
Click to expand...
Click to collapse
hookhook said:
These are what I did on my Vodafone V1605 with bl 1.06. Guarantee working. Actually, this's not a new solution. It exists long time ago, but pof remove this file from wiki due to license issue. Some chinese friend downloaded this file before and shared on their forum. I hope pof won't remove this thread since the Downgrade file is from another website.
Click to expand...
Click to collapse
Great, many thx to you. I'm going to try it on SPL 1.09 now...
I confirm it downgrading SPL 1.09 to 1.04
Does this keep the os in place and change only the boot loader so one would be able to just upgrade the radio?
Will attempt myself.
barrydavisjr said:
Does this keep the os in place and change only the boot loader so one would be able to just upgrade the radio?
Will attempt myself.
Click to expand...
Click to collapse
Yes, it does. I have latest SA HTC firmware with 1.20 radio and SPL 1.04 now.
Confirmed this will allow you to downgrade bootloader only and do a radio only flash.
This thread WILL be closed.
Although files are not on this website you are providing links to them.
silent_killa said:
This thread WILL be closed.
Although files are not on this website you are providing links to them.
Click to expand...
Click to collapse
I just removed all the problematic links and hope this thread won't be closed to help more people.
This's just a temporary solution. Pof will bring out a completely free and much better solution in the future.
silent_killa said:
This thread WILL be closed.
Although files are not on this website you are providing links to them.
Click to expand...
Click to collapse
Tool.
Later, Lew
hookhook said:
1. Go to Google, search for DownGrade_SPL.rar
2. Connect your tytn to PC and wait until activesync completed.
3. Etc.
Click to expand...
Click to collapse
Works only for the M3100!?
i dont find DownGrade_SPL.rar
hookhook said:
2. Connect your tytn to PC and wait until activesync completed.
.
Click to expand...
Click to collapse
one question.
my device is stuck on bootloader mode and when I connect to Activesync it does not recognize my device.
is it a problem (I can't try now because I'm at work and I don't have the device by my side)?
I works¡¡. I had installed rom 1.35 and i could downgrade bootloader to 1.04, install radio rom 1.16, get supercid and now i can modify extended rom.
Thanks¡¡¡¡¡
marcocasali78 said:
one question.
my device is stuck on bootloader mode and when I connect to Activesync it does not recognize my device.
is it a problem (I can't try now because I'm at work and I don't have the device by my side)?
Click to expand...
Click to collapse
If your tytn is stuck on bootloader 1.06 (can't boot into the OS) and don't have a 1.04 ship rom matching its CID in the wiki, you can't downgrade your bl now. Please be patient.
Works only for the M3100!?
Click to expand...
Click to collapse
Works for all Hermes!
i dont find DownGrade_SPL.rar
Click to expand...
Click to collapse
Google the whole word: "DownGrade_SPL.rar"
hookhook said:
If your tytn is stuck on bootloader 1.06 (can't boot into the OS) and don't have a 1.04 ship rom matching its CID in the wiki, you can't downgrade your bl now. Please be patient.
Click to expand...
Click to collapse
my tytn was stuck on bootloader 1.09.
i did what you told me and now my tytn is stuck on Windows Mobile Logo.
I tried to re-insert te superCid, but I couldn't.
the problem, now, is that i can't go on. (just one time it starts good and i could see the today screen)
what do you suggest to me? my tytn keep on have the SPL-1.09!
marcocasali78 said:
my tytn was stuck on bootloader 1.09.
i did what you told me and now my tytn is stuck on Windows Mobile Logo.
I tried to re-insert te superCid, but I couldn't.
the problem, now, is that i can't go on. (just one time it starts good and i could see the today screen)
what do you suggest to me? my tytn keep on have the SPL-1.09!
Click to expand...
Click to collapse
1. What's the current CID on your device?
2. What version of rom and BootLoader did you use before flashing to HTC 1.35 bl1.09?
3. Did you run pof Hermes unlocker and mtty.exe to make your device SuperCID before flashing to HTC 1.35 bl1.09?
Worked on my Cingular 8525. Thanks! I was pretty nervous to be hacking on my new toy, but so far, so good.
hookhook said:
1. What's the current CID on your device?
2. What version of rom and BootLoader did you use before flashing to HTC 1.35 bl1.09?
3. Did you run pof Hermes unlocker and mtty.exe to make your device SuperCID before flashing to HTC 1.35 bl1.09?
Click to expand...
Click to collapse
1. when I use the command "info 2" in mtty i have back "HTCSF kEØ(HTCEUSB>", so I don't know my CID
2. 1.04
3. yes
Ok... now this is going to be a work in progress and an answer to most questions...
To all pof, Des and Sleuth have done a great job in getting the tools together so we can flash our devices...
1. To all who want to SuperCID your device no matter what ROM version you have and no matter what Radio BootLoader version you have you can use POF's version 3 unlocker found here http://pof.eslack.org/hermes-unlocker/
2. Once you have SuperCID your device you can now load extracted ExtRom, OS, and radio roms (radio can only be done if you have radio bootloader 107 or less) to do this goto http://wiki.xda-developers.com/index.php?pagename=Hermes_BootloaderMFG
3. For all of those not interested in ROM cooking and flashing cooked ExtROM's all you need to use is des's SSPL tool... just copy it onto your device and run it... the SPL version should say SPL-1.09.des. The tool can be found here http://forum.xda-developers.com/showthread.php?t=293651
4. Just to clarify... once you have flashed radio bootloader 108 onto your device it is possible to do Extracted Radio only upgrades please read edit 3 below..... to check what radio bootloader version a radio rom has goto http://wiki.xda-developers.com/index.php?pagename=Hermes_ExtractedRadioRoms and radio only upgraded require SPL 1.04... for instructions on how to flash that goto http://wiki.xda-developers.com/index.php?pagename=Hermes_BootloaderMFG
5. if your device is unusable please refer to here http://wiki.xda-developers.com/index.php?pagename=Hermes_UpgradeProblems
appologies for all the links but thats what the wiki is for guys... lots of reading but it is all worth while in the end...
and if ive missed anything feel free to add...
edit 1... The reason you SuperCID your device is to enable flashing of any SPL Bootloader versions, extracted OS roms, extracted ExtROM's and to an extent Radio ROM's (only if your device has RadioBootloader 107 or less).... but SuperCIDing your device voids the warranty... if your just looking to upgrade your device to a newer ROM and are worried about the warranty just use des's SSPL tool... read point 3 above...
edit 2... the SSPL tool... you need to copy this onto your device while windows mobile is running... if your device is not in a usable state refer to point 5... once its finished copying click on the exe and run it... it will put your device into a 'Service' mode and with bootloader versions IPL-SSPL by Des and SPL-1.09.ds... all you need to do now is choose which shipped original rom you want to use to flash your device with... see here for options http://wiki.xda-developers.com/index.php?pagename=Hermes_Upgrades
edit 3... now who wants the good news woo hoo!!!! i have managed to create an unsigned nbh file and flash it onto my device... now please all follow these details step by step
1. download this http://forum.xda-developers.com/showthread.php?t=294046
2. download the appropriate Full Shipped ROM from either the Trinity or the Hermes of which you want to rip the Radio from
3. download this http://wiki.xda-developers.com/index.php?pagename=Hermes_NBH
4. extract the RUU_signed.nbh file from the exe using winrar or something
5. open a command prompt and point it to the same folder where you extracted the files you downloaded..
6. run nbhextract to extract the radio rom... delete all other .nb files except for 05_GSM.nb
7. edit the text file for nbhgen and delete all information except for this
HERM100
SuperCID
1.23.707.6
USA
300,05_GSM.nb
8. run nbhgen.. this will generate the nbh file required to flash your device...
9. copy SSPL to your device.. refer to here http://forum.xda-developers.com/showthread.php?t=293651
10. execute SSPL on your device which will put you into the 'Service' mode,
11. now run the RomUpgradeUT.exe file... and your done!!!!!!!! any questions just ask...
Dead Tytn
my tytn have bootloader 1.09 and it doesn't come up so i can't copy any thing to it , what can i do ?
jash431 said:
my tytn have bootloader 1.09 and it doesn't come up so i can't copy any thing to it , what can i do ?
Click to expand...
Click to collapse
you need to boot it into Windows Mobile... can you do this?
walshieau said:
you need to boot it into Windows Mobile... can you do this?
Click to expand...
Click to collapse
I thought step 5 covered this.
wpbear said:
I thought step 5 covered this.
Click to expand...
Click to collapse
but he didnt read step 5... i hadnt added that bit yet
Hello all,
I am a little confused about the issue of going back to BL 0107 if you flash Radio 1.33 + or Rom (say) 2.05 because you end up with BL 0108.
Isn't it true if you use Des's SSPL tool you can flash any ROM, so you can flash an older ROM, then you end up with older OS, Radio and Extended ROM as well as IPL and SPL??
Also if you use Boot loader 1.01 MFG, then upgrade individual components using MTTY??
With the latest developments over the past few days, it looks like Hermes is now an open field where one can try whatever combination as long as you can boot into service mode or Windows.
I would appreciate a comment from the developers confirming or explaining the current limitations.
Simple.
Please Answer if you are sure
Look !
my tytn have bootloader 1.09 and during upgrade it stopped , that is to say my phone das no OS so I cannot pass "WIndows Mobile " Screen unless I upgrade fully upgrade rom . I have read and tried all suggested ways but they are not useful , because bootloader 1.09 checks CID but my CID is corrupted .
I need a way to pass CID check same as SSPL . but I cannot copy any thing to phone . The only way which can help me , is a file which able to pass phone's CID check from PC .
jash431 said:
Look !
my tytn have bootloader 1.09 and during upgrade it stopped , that is to say my phone das no OS so I cannot pass "WIndows Mobile " Screen unless I upgrade fully upgrade rom . I have read and tried all suggested ways but they are not useful , because bootloader 1.09 checks CID but my CID is corrupted .
I need a way to pass CID check same as SSPL . but I cannot copy any thing to phone . The only way which can help me , is a file which able to pass phone's CID check from PC .
Click to expand...
Click to collapse
ME TOO...
IF have one NEW VERSION with "SSPL",use Micro sd /RUU ,maybe can help me and you to reflash it ...
walshieau
BIG THANKZzz for this information...
simple said:
Hello all,
I am a little confused about the issue of going back to BL 0107 if you flash Radio 1.33 + or Rom (say) 2.05 because you end up with BL 0108.
Isn't it true if you use Des's SSPL tool you can flash any ROM, so you can flash an older ROM, then you end up with older OS, Radio and Extended ROM as well as IPL and SPL??
Also if you use Boot loader 1.01 MFG, then upgrade individual components using MTTY??
With the latest developments over the past few days, it looks like Hermes is now an open field where one can try whatever combination as long as you can boot into service mode or Windows.
I would appreciate a comment from the developers confirming or explaining the current limitations.
Simple.
Click to expand...
Click to collapse
1. If you have radio bootloader 108 you cannot downgrade it...
2. Yes its true but that still wont downgrade your radio bootloader.. it will just downgrade your radio, os and extended rom
3. yes that is correct
4. current limitations read this... http://wiki.xda-developers.com/index.php?pagename=HTC_Hermes
jash431 said:
Look !
my tytn have bootloader 1.09 and during upgrade it stopped , that is to say my phone das no OS so I cannot pass "WIndows Mobile " Screen unless I upgrade fully upgrade rom . I have read and tried all suggested ways but they are not useful , because bootloader 1.09 checks CID but my CID is corrupted .
I need a way to pass CID check same as SSPL . but I cannot copy any thing to phone . The only way which can help me , is a file which able to pass phone's CID check from PC .
Click to expand...
Click to collapse
ok now you have to open an mtty session... download this ftp://xda:[email protected]/Hermes/Cooked_ROMs/SPL-1.01MFG_Pack.zip
1. Disable 'Allow USB Connections' in Activesync
2. Open mtty.exe
3. type \\.\WCEUSBSH001 in the port section and click ok
4. press 'Enter' twice and type task 32 and press enter
4. type info 2 and tell me what is displayed...
What about writing an app which fully identifies all Hermes specs? It should open a message box and answer whether device is SuperCID, which IPL, SPL, RBL, ROM, Radio and if readable which ExtROM. Wouldn't that be nice? Every noob could give all the information viable for all others to help.
well if the user was to go and look at the device information application in 'Settings' > System then can find out what radio rom version they have when in turn if they look at the table in the wiki they can tell what version of Radio Bootloader they have... but i will investigate writing a little app... shouldnt be too hard...
walshieau said:
edit 3... now who wants the good news woo hoo!!!! i have managed to create an unsigned nbh file and flash it onto my device... now please all follow these details step by step
1. download this http://forum.xda-developers.com/showthread.php?t=294046
2. download the appropriate Full Shipped ROM from either the Trinity or the Hermes of which you want to rip the Radio from
3. download this http://wiki.xda-developers.com/index.php?pagename=Hermes_NBH
4. extract the RUU_signed.nbh file from the exe using winrar or something
5. open a command prompt and point it to the same folder where you extracted the files you downloaded..
6. run nbhextract to extract the radio rom... delete all other .nb files except for 05_GSM.nb
7. edit the text file for nbhgen and delete all information except for this
HERM100
SuperCID
1.23.707.6
USA
300,05_GSM.nb
8. run nbhgen.. this will generate the nbh file required to flash your device...
9. copy SSPL to your device.. refer to here http://forum.xda-developers.com/showthread.php?t=293651
10. execute SSPL on your device which will put you into the 'Service' mode,
11. now run the RomUpgradeUT.exe file... and your done!!!!!!!! any questions just ask...
Click to expand...
Click to collapse
Just to be clear:
Can you put the new "RUU_signed.nbh" from step 8 above back into the full RUU....._ship.exe using Winrar and run it that way too?
This is very cool! So we can change to any radio ROM (upgrade or downgrade), but technically we will still have radio BL 108, but who cares.
wpbear said:
Just to be clear:
Can you put the new "RUU_signed.nbh" from step 8 above back into the full RUU....._ship.exe using Winrar and run it that way too?
This is very cool! So we can change to any radio ROM (upgrade or downgrade), but technically we will still have radio BL 108, but who cares.
Click to expand...
Click to collapse
1. i havent tried that... what is the point??
2. yes that is correct...
dead tytn jash431
my dead tytn has these informations:
1- task 32 ----> Level = FF
2- info 2 ----> HTCSF kEØ(HTCEUSB>
3- bootloader 1.09
4- stop on "windows Mobile" screen
jash431 said:
my dead tytn has these informations:
1- task 32 ----> Level = FF
2- info 2 ----> HTCSF kEØ(HTCEUSB>
3- bootloader 1.09
4- stop on "windows Mobile" screen
Click to expand...
Click to collapse
check your pm
Hi Walshieau,
After I follow your edit 3 step, when I try to upgrade the radio,
it shown Error 262. What's that error message for?
Thanks
did you copy SSPL to your device and run it before you started the upgrade???
Am I right in thinking I could mix and match all the components with this tool?
I.E. extract the o.s. from one full update then extract the radio from another, then use "NBF generator" to merge them and flash them all at once?
I need help phone stuck in bootloader and its not registering the usb syn cable being attached I think i just need to set it to boot to os. Have HARD-SPL.
ok got usb working again but ruu says it can't find device. is that because its already because its already in bootloader?.
edit- did an info 8 in mtty and got this
Block 0x3A8(936) is BAD block !!!
Block 0x3A9(937) is BAD block !!!
Block 0x3AA(938) is BAD block !!!
EDIT- finally got home and was able to reflash os with sd card and phone works now.
but what did you do to be able to flash?
everytime I try to flash it enters the BL and hangs. Then it says it cannot update. I've got a 1.09 BL
thanks
Read here:
http://forum.xda-developers.com/showthread.php?t=286755
giving more data:
which bootloader version on your device?
1.09
which rom on your device?
1.35.255.2
which RUU are u using?
HTC WWE version
which rom are u trying to flash?
2.11.255.1
Bootloader 1.09 is not compatible with new RUU version inside HTC's 2.11.255.1 ROM.
If you just run the shipped exe file (without unpacking), it will first upgrade your bootloader to 1.11 using the old RUU, then launch the new RUU and flash your rom.
BTW, i suggest you to read the hardSPL thread before attempting to upgrade
Ok, now I noticed that incompatibilty and used HArd SPL to upgrade to 1.11.
that's what it says now in threecolor bootloader.
But still when I try to upgrade it hangs on the bootloader saying HERM200 IPL-1.01 and HERM200 SPL-1.11 and USB in the white area. And in the PC it says OS information detecttion for ever!!
If I reboot it no problem, everything is working.
thanks for you help!!
ok, now that you have HardSPL-1.11 on your device, do this:
1. Use winrar to extract the contents of RUU_Hermes_QTEK_WWE_2.11.255.1_102_6275_1.38.00.10_108_Ship.exe
2. You will see a file named RUU_Inside.exe
3. Use winrar again to extract the contents of RUU_Inside.exe
4. Run the RUU you'll find here, with device in bootloader mode.
Keep in mind that this will overwrite HARD-Spl with the shipped 1.11 bootloader, if you don't want that, read the wiki:
http://wiki.xda-developers.com/index.php?pagename=Hermes_UpgradeGuide
Well it worked!!! Thanks a lot!!!! any explanation for this? (i forgot to tell I was using vista)
But... eheheh now I found out http://forum.xda-developers.com/showthread.php?t=297849&page=2
and it happens the same.. when I run it... (after winraring the main file) it hangs on the BL! Damn!!!
Muster said:
(i forgot to tell I was using vista)
Click to expand...
Click to collapse
boh!
I know I know awfull mistake!!!
Why does this happens when I try to update? ANd why it worked the way you said it would?
Muster said:
Ok, now I noticed that incompatibilty and used HArd SPL to upgrade to 1.11.
that's what it says now in threecolor bootloader.
But still when I try to upgrade it hangs on the bootloader saying HERM200 IPL-1.01 and HERM200 SPL-1.11 and USB in the white area. And in the PC it says OS information detecttion for ever!!
If I reboot it no problem, everything is working.
thanks for you help!!
Click to expand...
Click to collapse
uhh... it should say SPL-1.11.Oli
It did not!! It says now 1.11!!
when I tried the upgrade to WM6 it used it's own bootloader 1.09 Ds and it changed again. Is it possible that 1.09 BL is definitevely not working in my TyTN?
After flashing my locked T-mob vario dutch (for the 20st time) it now is bricked.
I tried to flash the Fun_Key_rom.
Hermes is stuck on the HTC logo 1pl-1.01 and SPL-2.03 not Super CID. (because of the warranty). I followed the thread about unbricking, but untill now no result.
I can flash it with Ruu.exe (and ruuwrapper.exe) the option 2.02/2.10 works for me untill 1% and then I get a invallid vendor ID.
I read the thread over and over again, but didn't seem to get how to unbrick it. Do I need to have a special rom? or other software?
no you need to flash Hard SPL on your phone right now!!! you can always unflash the HardSPL at a later date but you where just asking for a brick by not flashing HardSPL in the first place!
austinsnyc said:
no you need to flash Hard SPL on your phone right now!!! you can always unflash the HardSPL at a later date but you where just asking for a brick by not flashing HardSPL in the first place!
Click to expand...
Click to collapse
Had no problems for all those times..untill now I know it was stupid.
Trying to flash Hard SPL I got a 260 update error on the HardSPL v7. I also tried it with another upgrader and got an 270 error. It installed until 100% but no result.
marcoryn said:
Had no problems for all those times..untill now I know it was stupid.
Trying to flash Hard SPL I got a 260 update error on the HardSPL v7. I also tried it with another upgrader and got an 270 error. It installed until 100% but no result.
Click to expand...
Click to collapse
Yes, you need to use CustomRUU to avoid the invalid vendor ID. It bypasses the CID check. That is why it works, even though you are not superCID.
Regarding the 260 error, try a couple things.
If you can, try SD flashing.
If you cannot do SD method, try using "manual bootloader" method:
- Put phone in bootloader mode
- NOW attach to USB lead
- Start CustomRUU
If that does not work, try taking the battery out for a while (5 minutes) and then try again.
todd_jg said:
Yes, you need to use CustomRUU to avoid the invalid vendor ID. It bypasses the CID check. That is why it works, even though you are not superCID.
QUOTE]
Where can I get CustomRUU,Could'nt find it on XDA. Is it the same as RUUwrapper and RUUupdate?
Click to expand...
Click to collapse
marcoryn said:
Where can I get CustomRUU,Could'nt find it on XDA. Is it the same as RUUwrapper and RUUupdate?
Click to expand...
Click to collapse
It may be the RUUWrapper you have, but you can get it at THIS THREAD You may already have used it though, on the one that did not give you the invalid vendor error. Use it with the nbh file. If you only have an exe, then you can use winrar to take it apart into 2 files - the ruu file (the updater) and the nbh (the ROM itself). Once you are using the right CustomRUU, try the things I mentioned in my previous post.
Other things to be sure of...
If you are using Vista, check with MrVanx guides to see what you need to do.
You must have...
ActiveSync 4.5
.NET framework 2 or higher
Thanks for ur help. Really appr. it.
When I use the CustomRuu on any nbh file I'll get the Update error (260).
If I use the same nbh file on the RUU.exe file and I choose the 2.02/2.10 option it flashes my mobile till 1%. Then I get error 274 Invalid Vendor ID.
I see on the forum a lot of people bricked there Tytn on SPL 2.03.
Is Mr. Olipro having an solution?
Have you tried these things...
Code:
Regarding the 260 error, try a couple things.
If you can, try SD flashing.
If you cannot do SD method, try using "manual bootloader" method:
- Put phone in bootloader mode
- NOW attach to USB lead
- Start CustomRUU
If that does not work, try taking the battery out for a while (5 minutes) and then try again.
todd_jg said:
Have you tried these things...
Click to expand...
Click to collapse
Yes, but without any succes
marcoryn said:
Yes, but without any succes
Click to expand...
Click to collapse
What were the specific errors for each method? I know you cannot get 260 with SD card flash method.
marcoryn said:
After flashing my locked T-mob vario dutch (for the 20st time) it now is bricked.
I tried to flash the Fun_Key_rom.
Hermes is stuck on the HTC logo 1pl-1.01 and SPL-2.03 not Super CID. (because of the warranty). I followed the thread about unbricking, but untill now no result.
I can flash it with Ruu.exe (and ruuwrapper.exe) the option 2.02/2.10 works for me untill 1% and then I get a invallid vendor ID.
I read the thread over and over again, but didn't seem to get how to unbrick it. Do I need to have a special rom? or other software?
Click to expand...
Click to collapse
You are in a quite bad situation. I am not well aware about all the new ways to backup bricked hermes; but as far as I know the only remaining possibility for you is to flash your device using the default flasher AND a rom matching your CID.
Hopefully tmobile dutch released an updated WM5 release for your phone. You should be able to flash it, setup hardspl, and flash anything you want; but in a safe way this time.
There is maybe a way to tweak the CID of cooked ROM, but don't know anything about it (and there will certainly be signing issues).
In order to get your CID and see if something matching it is available at the wiki read the wiki about mtty (as far as I remember it is something like "type 2").
fun_key said:
You are in a quite bad situation. I am not well aware about all the new ways to backup bricked hermes; but as far as I know the only remaining possibility for you is to flash your device using the default flasher AND a rom matching your CID.
Hopefully tmobile dutch released an updated WM5 release for your phone. You should be able to flash it, setup hardspl, and flash anything you want; but in a safe way this time.
There is maybe a way to tweak the CID of cooked ROM, but don't know anything about it (and there will certainly be signing issues).
In order to get your CID and see if something matching it is available at the wiki read the wiki about mtty (as far as I remember it is something like "type 2").
Click to expand...
Click to collapse
Hope Olipro will release a CustomRuu version where 2.03 can be flashed. Lot of people have probs with 2.03. Dutch T-Mob haven't released anything there is no rom availeble.
What were the specific errors for each method? I know you cannot get 260 with SD card flash method.
Click to expand...
Click to collapse
I got another error on cooked roms (26008 or something) and when I put an org. carrier rom on the card it says checking but will not install because its not a legal rom.
Because of a hardware error I had to return my Tytn today..while it still is bricked. Hope Tmob will be kind and fix this for me along with the hardware issue
My Wizard keeps starting up in the boot (rainbow) screen,
it says:
IPL 2.21.0001
SPL 2.21
Is it bricked? If i connect the phone "USB" appears in the down left corner, but activesync doesn't seem to react.
What to do?
As is in bootloader , not bricked
so reflash with new rom but be sure it is cid unlocked
lmd0990 said:
As is in bootloader , not bricked
so reflash with new rom but be sure it is cid unlocked
Click to expand...
Click to collapse
I've tried to update with the official MDA ROM, but i get an 294 error, invalid Vendor ID, what should i do now?
U may try another roms
It seems that i can't upgrade it with any rom, which one should i use?
I tried 2 different Roms, the program does the update and tells me it was a succes, but at restart i get the same rainbow screen....
CIDlocked?
kubek1334 said:
CIDlocked?
Click to expand...
Click to collapse
I Think so, i'd never removed it....
Soo...
Nothing you can do.. [except imei-check]
Maybe try to load an official rom or Wizard Love
And read about G4 version.
I see that you tried to load an SPL rom
I think that you are lucky.
You only have HalfBricked Wizard )
kubek1334 said:
Soo...
Nothing you can do.. [except imei-check]
Maybe try to load an official rom or Wizard Love
And read about G4 version.
I see that you tried to load an SPL rom
I think that you are lucky.
You only have HalfBricked Wizard )
Click to expand...
Click to collapse
If i try to load the official ROM i get Error 294 [Invalid Vendor ID] and the love ROM won't install, get error 300...
try the mun's ruu. [Read topic about HardSPL]
Tried it to, no luck either.
try wizard service tool v 4.2.2 (WST) , get it from wizard forum ,,,,,, good luck
lmd0990 said:
try wizard service tool v 4.2.2 (WST) , get it from wizard forum ,,,,,, good luck
Click to expand...
Click to collapse
downloaded it, but WST doesn't find my Wizard...big paperweight
Use another update tool... Search for: ROMUpdateUtility_Wizard_NoID.exe
yes download RomUpdateUtility_Wizard_NoID , then put .nbf rom file in folder
i think it will solve it ,,,,,,,,,,,,,, good luck
lmd0990 said:
yes download RomUpdateUtility_Wizard_NoID , then put .nbf rom file in folder
i think it will solve it ,,,,,,,,,,,,,, good luck
Click to expand...
Click to collapse
Tried above, but no luck. Now stands "RUU" in the upper right corner, what's up with that?
is there also USB in lower left conrner???
lmd0990 said:
is there also USB in lower left conrner???
Click to expand...
Click to collapse
Yes it is,
it has broken SPL (2.21 - its G3 not G4)
Cidlocked.
Only what's left is imei-check