My Wizard keeps starting up in the boot (rainbow) screen,
it says:
IPL 2.21.0001
SPL 2.21
Is it bricked? If i connect the phone "USB" appears in the down left corner, but activesync doesn't seem to react.
What to do?
As is in bootloader , not bricked
so reflash with new rom but be sure it is cid unlocked
lmd0990 said:
As is in bootloader , not bricked
so reflash with new rom but be sure it is cid unlocked
Click to expand...
Click to collapse
I've tried to update with the official MDA ROM, but i get an 294 error, invalid Vendor ID, what should i do now?
U may try another roms
It seems that i can't upgrade it with any rom, which one should i use?
I tried 2 different Roms, the program does the update and tells me it was a succes, but at restart i get the same rainbow screen....
CIDlocked?
kubek1334 said:
CIDlocked?
Click to expand...
Click to collapse
I Think so, i'd never removed it....
Soo...
Nothing you can do.. [except imei-check]
Maybe try to load an official rom or Wizard Love
And read about G4 version.
I see that you tried to load an SPL rom
I think that you are lucky.
You only have HalfBricked Wizard )
kubek1334 said:
Soo...
Nothing you can do.. [except imei-check]
Maybe try to load an official rom or Wizard Love
And read about G4 version.
I see that you tried to load an SPL rom
I think that you are lucky.
You only have HalfBricked Wizard )
Click to expand...
Click to collapse
If i try to load the official ROM i get Error 294 [Invalid Vendor ID] and the love ROM won't install, get error 300...
try the mun's ruu. [Read topic about HardSPL]
Tried it to, no luck either.
try wizard service tool v 4.2.2 (WST) , get it from wizard forum ,,,,,, good luck
lmd0990 said:
try wizard service tool v 4.2.2 (WST) , get it from wizard forum ,,,,,, good luck
Click to expand...
Click to collapse
downloaded it, but WST doesn't find my Wizard...big paperweight
Use another update tool... Search for: ROMUpdateUtility_Wizard_NoID.exe
yes download RomUpdateUtility_Wizard_NoID , then put .nbf rom file in folder
i think it will solve it ,,,,,,,,,,,,,, good luck
lmd0990 said:
yes download RomUpdateUtility_Wizard_NoID , then put .nbf rom file in folder
i think it will solve it ,,,,,,,,,,,,,, good luck
Click to expand...
Click to collapse
Tried above, but no luck. Now stands "RUU" in the upper right corner, what's up with that?
is there also USB in lower left conrner???
lmd0990 said:
is there also USB in lower left conrner???
Click to expand...
Click to collapse
Yes it is,
it has broken SPL (2.21 - its G3 not G4)
Cidlocked.
Only what's left is imei-check
Related
Flashed WMXL 0.20 yesterday. All fine. I stupidly installed a WM2003 program that seems to have edited the graphics driver. Now the thing wont boot past the HTC splash screen. I've tried flashing, same rom, different t-mobile roms etc. No luck, always same error.
What gives?
Installing a program does not usually brick a device.
And if your graphics driver has been modified,I suggest you do a hard reset on your device.
If that is not helping,please provide your SPL and Radio version,also Cid status and so on ,see who can help you here.
Spuddy said:
Flashed WMXL 0.20 yesterday. All fine. I stupidly installed a WM2003 program that seems to have edited the graphics driver. Now the thing wont boot past the HTC splash screen. I've tried flashing, same rom, different t-mobile roms etc. No luck, always same error.
What gives?
Click to expand...
Click to collapse
Sounds like you're flashing & writing before reading. I'm guessing you went straight to the WM6 rom and didn't do any of the SIM or CID unlocking. Read the following threads and you should discover what you need and probably loads more too...
The Hermes Bible - points to all you need to know
http://wiki.xda-developers.com/index.php?pagename=HTC_Hermes
Common upgrade problems (including yours)
http://wiki.xda-developers.com/index.php?pagename=Hermes_UpgradeProblems
Good luck in your discoveries
Thanks for your advice. I have managed to flash a hungarian T-Mobile ROM to my device and am now going to make is supercid so I can put WM6 back on. Thanks again.
Spuddy said:
Thanks for your advice. I have managed to flash a hungarian T-Mobile ROM to my device and am now going to make is supercid so I can put WM6 back on. Thanks again.
Click to expand...
Click to collapse
Congrats and have fun flashing - it's addictive.
I'd suggest that you read and try Olipro's Hard-SPL before you go any further. This appears to be the answer to many of our prayers because you should be able to recover a bad radio flash. (I'm guessing that the 1.04 version will become most popular)
Hard-SPL, Or How to Not Brick Your PDA Ever Again
http://forum.xda-developers.com/showthread.php?t=296722
Spuddy said:
. . . a WM2003 program that seems to have edited the graphics driver . . .
Click to expand...
Click to collapse
What program was that, if you don't mind my asking?
abubasim said:
What program was that, if you don't mind my asking?
Click to expand...
Click to collapse
DotPocket.
http://www.dotpocket.com/pocket-pc-software.html
Hey,
I'm pretty new here but I hope I can get some help here.
I got myself a HTC X7550 (Athena) and when I connected it with activesync a romupdate started through a mistake by me.
It told me de vendor ID was wrong but instead of restarting,
my ROM image on the device was GONE.
Is there a way to know the vendorID and to find the original ROM image?
Regards FRaccie
Download the zip fiel called: Hard-SPL(2).zip
Than have your x7500 plugged to your pc and make sure you are on the bootloader (the 3 color screen).
Now unzip the file and copy the files to a different folder and than run the file:ROMUpdateUtility.exe
This will get you out of there and you can reset the x7500 once it's done.
After that download the file:AthenaUnlocker.zip and follow the instruction on the screen. After that you could install wm6.
Which Hard SPL version?
Hello, which version of Hard SPL should we use? for the athena? am having the same problem as the above concern. kindly provide full link to the file. tnx.
See attached file (if it uploaded). If not you can search for it here in this forum.
Unlock in Bootloader
Hi JasJarMan. Your attached file was for Trinitiy device. Can this also be used for the X7500 ?
I need to unlock my X7500 from Bootloader if it is possible.
I can not find any ROM that installs on my X7500 and I am stuck in bootloader. My Telephone supplier has not released the original ROM as a flash- file and therefore I am afraid my device is currently bricked.
If I could get it back in original state I would be very happy and try unlock it before flashing again.
Regards, Eric
http://forum.xda-developers.com/showthread.php?t=315831
use the file there..
boinger66 said:
http://forum.xda-developers.com/showthread.php?t=315831
use the file there..
Click to expand...
Click to collapse
Thanks Boinger66 but according to the video / docu in this tread, the unlock are done in x7500's operative system. I am currently at Bootloader because I can not boot the device with any operativesystem.
Can the unlock application in the tread also be used in bootloader "modus" ?
links
EricBr said:
Thanks Boinger66 but according to the video / docu in this tread, the unlock are done in x7500's operative system. I am currently at Bootloader because I can not boot the device with any operativesystem.
Can the unlock application in the tread also be used in bootloader "modus" ?
Click to expand...
Click to collapse
I´d wanted help. Try this tread
http://forum.xda-developers.com/showthread.php?t=320367
Here is the x7500 ship rom go ahead and flash it ur device will be A OK
http://rapidshare.com/files/50723071/RUU_Athena_HTC_WWE_1.25.405.2_1.38.00.00_Ship.exe
pm me what happens
JasjarMan said:
See attached file (if it uploaded). If not you can search for it here in this forum.
Click to expand...
Click to collapse
ERROR 244 Invalid Update TOOL
i have same problem
Error 300 invalid upgrade tool =(
nittin_sp said:
Here is the x7500 ship rom go ahead and flash it ur device will be A OK
http://rapidshare.com/files/50723071/RUU_Athena_HTC_WWE_1.25.405.2_1.38.00.00_Ship.exe
Click to expand...
Click to collapse
It can't be flashed that i have been downloaded..
My qtek 9100 is dead(((
I think (iam almost shure ) taht it is g4.It starts and show a bootloader rgb
ipl 1.01
spl 1.01
RUU at the top-right corner
usb at the bottom-left (when connected to computer)
It was never unlocked in anyway.
My friend tryed to flash it with wm6 but then the clouds appered it hanged.
We've tryed to flash it with anothe rom but it just got worste - it shows only the bootloader
I've tryed wizard_love but it says that something wrong at the beggining.Other roms are hanging on 95% or 96% and swows an error
Please can you help me?shelltool is not flashing because it's cabs are not installed....And i dunno what to do iunderstood that i need some rom that ran be flashed to locked device.can you help with some links\faq's?
Sorry for my bad english....
thanx in advance....
yellowmegaman said:
My qtek 9100 is dead(((
I think (iam almost shure ) taht it is g4.It starts and show a bootloader rgb
ipl 1.01
spl 1.01
RUU at the top-right corner
usb at the bottom-left (when connected to computer)
It was never unlocked in anyway.
My friend tryed to flash it with wm6 but then the clouds appered it hanged.
We've tryed to flash it with anothe rom but it just got worste - it shows only the bootloader
I've tryed wizard_love but it says that something wrong at the beggining.Other roms are hanging on 95% or 96% and swows an error
Please can you help me?shelltool is not flashing because it's cabs are not installed....And i dunno what to do iunderstood that i need some rom that ran be flashed to locked device.can you help with some links\faq's?
Sorry for my bad english....
thanx in advance....
Click to expand...
Click to collapse
IPL/SPL 1.01 is not a G4 ,its a G3 phone,its not flashing wm6 coz its CID locked. As long as it gets into Bootloaders mode (RGB) screen,its safe.Don't flash with Shell Tool.Just download the official carrier's rom and flash it in Bootloaders mode,it'll recover back,than get it SIM/CID unlocked and then upgrade to any wm6 rom.
Now i've reached some success.I'v downloaded ROMUpdateUtility_Wizard_NoID.exe and used it with wizard love but i just reboots after a minute of clouds(((What i need to do?find a original rom and flash it?
yellowmegaman said:
Now i've reached some success.I'v downloaded ROMUpdateUtility_Wizard_NoID.exe and used it with wizard love but i just reboots after a minute of clouds(((What i need to do?find a original rom and flash it?
Click to expand...
Click to collapse
Download the official rom from here and flash it :-
http://s131209249.online.de/vodafone_software/9100.htm
Great thnx for help!!!!I'll try it and will post the result in few minutes.Hope u will still be here!
Nope.no luck(
Official rom that u advised to flash says vendor error and than tried to flash with romUpdater-noid it says open file erorr on every nbf((
Ideas?
yellowmegaman said:
Nope.no luck(
Official rom that u advised to flash says vendor error and than tried to flash with romUpdater-noid it says open file erorr on every nbf((
Ideas?
Click to expand...
Click to collapse
Perhaps the Rom package you downloaded is a corrupt download,redownload it and flash or use this RUU :-
Hhhmmm....RUU MUN says "INVALID UPDATE TOOL" "cant be used for this device" I dont understand what is wrong
Thanx A Lot For Help!!!i've Done It! It Finally Works!__:d
yellowmegaman said:
Thanx A Lot For Help!!!i've Done It! It Finally Works!__:d
Click to expand...
Click to collapse
Thanks !
Glade to hear its working
I restored the stock vodafone rom and then flashed the stock spl now when i turn the phone on i get the spl screen and it say
upgrade rom code error
then i get a grey screen that says Loading... nothing more
lohap said:
I restored the stock vodafone rom and then flashed the stock spl now when i turn the phone on i get the spl screen and it say
upgrade rom code error
then i get a grey screen that says Loading... nothing more
Click to expand...
Click to collapse
How did you flash the original SPL?
As far as I know there is no JumpSPL or SoftSPL for Raphael yet? Or am I wrong?
[EDIT] Sorry, I've seen how it's possible in the Wiki.
Per the instructions at
http://forum.xda-developers.com/showthread.php?t=410150
now it seems to boot the stock spl but with that error
windows doesnt even detect it i think
woop got windows to detect it
problem is i cant flash the hardspl, spl and if i try to flash a stock firmware i get vendor id error, anyone got a full dump of the vodaone uk firmware
Could not you flash the ROM from memory card (when you find any)?
crocodile010 said:
Could not you flash the ROM from memory card (when you find any)?
Click to expand...
Click to collapse
problem is i cant flash the hardspl..........so 1 and 1 is 2,he cannot do that
have u tried getting in touch with olipro or cmonex? or with any members of the elite team? my guess is they are the ones with most technical knowledge of the device so ask one of them help.
ofcourse always be nice and polite and patient as those guys have their plates full
thanks ill send them a pm and see if i need to buy a new device.
hi been told i can fix this with mtty and one got a link to a download and do i need to do anything to the raphel to get it into serial mode
Hi
Sorry for the bad English im from Germany
I flashed successfully to the 1.30 NoDo Update then i maked an mistake!
i flashed back to 1.09 and then to the Originaly T-Mobile germany! And now i want back to 1.09 to go on the NoDo 1.30 but if i want to update 1.09 i get the Error 244 invalid Model ID how can i fix it????
miagii said:
Hi
Sorry for the bad English im from Germany
I flashed successfully to the 1.30 NoDo Update then i maked an mistake!
i flashed back to 1.09 and then to the Originaly T-Mobile germany! And now i want back to 1.09 to go on the NoDo 1.30 but if i want to update 1.09 i get the Error 244 invalid Model ID how can i fix it????
Click to expand...
Click to collapse
How are you trying to flash, direct from fle to phone from PC or using y split cable and goldcard? maybe to go back you need to put the ModeID file in te 1.09 folder, like you initially did in the 1.30 folder. See this post
Im flashing directly and i know the Tutorial u gave my i was already on the 1.30 NoDo Update and then i made and Downgrade to 1.09 then to 1.28 Original T-Mobile Rom.
Now i want Update again to 1.30
but if try to Flash the 1.09 Rom ( itried it with three diffrent ModelID.fig) then i get 244 Invalid Model ID
i also have this problem.
i loaded this rom onto my htc : RUU_Mozart_TMO_DE_1.28.111.03_Radio_5.52.09.16_22.24.50.09U_by_ansar
i didnt know that it has the tmobile branding within so i wanted to debrand with the 1.09.but now i always get error 244 invalid model id.isnt there any solution for this?
You have probably updated the SPL with your updates, so the first thing you'll need to do is downgrade that, and then install the ROM again. You can search in ansar posts for how to downgrade the SPL.
ok thx for help,i will try
sry for double post,but i noticed that i already have spl 1.28....
i also noticed i have hardware revision number : NA n i red that its not fixable.is that true?its hard to imagine cuz i didnt really do anything,just flashed this weird branded rom n now cant go back
diaemus9 said:
sry for double post,but i noticed that i already have spl 1.28....
i also noticed i have hardware revision number : NA n i red that its not fixable.is that true?its hard to imagine cuz i didnt really do anything,just flashed this weird branded rom n now cant go back
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1196183
Just try this. If it still has an error, it is probably a big problem.
You have to install this like any other ROM and after installation don't worry about the phone not starting up. Just install RSPL/HSPL and flash any ROM you would like.
no its not working.again it stops at 1 % n then comes error 294 invalid vendor id.
its desperate
diaemus9 said:
no its not working.again it stops at 1 % n then comes error 294 invalid vendor id.
its desperate
Click to expand...
Click to collapse
Have you tried a hard reset before trying to flash ? And have you installed RSPL/HSPL and what version of it ?
well,i made a hard reset now,but somehow after,the data was still on my phone,means phone numbers etc.so i assume the hard reset didnt work.
i also tried to install rspl/hspl.i could install rspl,however when i install hspl my pc says i installed it succesfully.but when i launch boot loader then,it shows me the spl 1.28.xxx i had before rspl and no hspl.
its just freakin frustratin.i dunno what to do anymore
diaemus9 said:
well,i made a hard reset now,but somehow after,the data was still on my phone,means phone numbers etc.so i assume the hard reset didnt work.
i also tried to install rspl/hspl.i could install rspl,however when i install hspl my pc says i installed it succesfully.but when i launch boot loader then,it shows me the spl 1.28.xxx i had before rspl and no hspl.
its just freakin frustratin.i dunno what to do anymore
Click to expand...
Click to collapse
In order to install hspl you need to run rspl first, so if rspl doesent run you can't install hspl... You've probably flashed some really bad ROM.
The last thin that i can suggest is to try to flash some older ROM or the rom that now is in the phone and then try to flash something else... but i doubt it will work without RSPL/HSPL
like i said,i did install rspl,then right after it hspl,pc says its fine but my device shows old spl after installation.it did show the rspl in boot loader but not hspl.
well i try that but doubt it will work.thx for ur effort anyway
diaemus9 said:
like i said,i did install rspl,then right after it hspl,pc says its fine but my device shows old spl after installation.it did show the rspl in boot loader but not hspl.
well i try that but doubt it will work.thx for ur effort anyway
Click to expand...
Click to collapse
Try downloading another version of RSPL/HSPL
http://forum.xda-developers.com/showthread.php?t=1195647
These are the ones that i have used. If this doesent help idk what to do next...
anyway if you cannot install HSPL then its not possible to install a ROM.
nope its no use.everything i try stops at 1%.
this is useless,looks like i can put this phone into trash.the thing that makes me mad is that i could flash everything before,then flashed a rom from this forum n now thi...
diaemus9 said:
nope its no use.everything i try stops at 1%.
this is useless,looks like i can put this phone into trash.the thing that makes me mad is that i could flash everything before,then flashed a rom from this forum n now thi...
Click to expand...
Click to collapse
Actually you've probably made a mistake when you flashed it back... and you've used a bad ROM... so try to ask some more experienced member, maybe they can help... sorry that i couldn't.
no,its not ur fault ,thx for ur effort.
looks like no one can help though,already searched the whole internet.n no one else responses here