help plz((((must be a way 2 flash it - G4

My qtek 9100 is dead(((
I think (iam almost shure ) taht it is g4.It starts and show a bootloader rgb
ipl 1.01
spl 1.01
RUU at the top-right corner
usb at the bottom-left (when connected to computer)
It was never unlocked in anyway.
My friend tryed to flash it with wm6 but then the clouds appered it hanged.
We've tryed to flash it with anothe rom but it just got worste - it shows only the bootloader
I've tryed wizard_love but it says that something wrong at the beggining.Other roms are hanging on 95% or 96% and swows an error
Please can you help me?shelltool is not flashing because it's cabs are not installed....And i dunno what to do iunderstood that i need some rom that ran be flashed to locked device.can you help with some links\faq's?
Sorry for my bad english....
thanx in advance....

yellowmegaman said:
My qtek 9100 is dead(((
I think (iam almost shure ) taht it is g4.It starts and show a bootloader rgb
ipl 1.01
spl 1.01
RUU at the top-right corner
usb at the bottom-left (when connected to computer)
It was never unlocked in anyway.
My friend tryed to flash it with wm6 but then the clouds appered it hanged.
We've tryed to flash it with anothe rom but it just got worste - it shows only the bootloader
I've tryed wizard_love but it says that something wrong at the beggining.Other roms are hanging on 95% or 96% and swows an error
Please can you help me?shelltool is not flashing because it's cabs are not installed....And i dunno what to do iunderstood that i need some rom that ran be flashed to locked device.can you help with some links\faq's?
Sorry for my bad english....
thanx in advance....
Click to expand...
Click to collapse
IPL/SPL 1.01 is not a G4 ,its a G3 phone,its not flashing wm6 coz its CID locked. As long as it gets into Bootloaders mode (RGB) screen,its safe.Don't flash with Shell Tool.Just download the official carrier's rom and flash it in Bootloaders mode,it'll recover back,than get it SIM/CID unlocked and then upgrade to any wm6 rom.

Now i've reached some success.I'v downloaded ROMUpdateUtility_Wizard_NoID.exe and used it with wizard love but i just reboots after a minute of clouds(((What i need to do?find a original rom and flash it?

yellowmegaman said:
Now i've reached some success.I'v downloaded ROMUpdateUtility_Wizard_NoID.exe and used it with wizard love but i just reboots after a minute of clouds(((What i need to do?find a original rom and flash it?
Click to expand...
Click to collapse
Download the official rom from here and flash it :-
http://s131209249.online.de/vodafone_software/9100.htm

Great thnx for help!!!!I'll try it and will post the result in few minutes.Hope u will still be here!

Nope.no luck(
Official rom that u advised to flash says vendor error and than tried to flash with romUpdater-noid it says open file erorr on every nbf((
Ideas?

yellowmegaman said:
Nope.no luck(
Official rom that u advised to flash says vendor error and than tried to flash with romUpdater-noid it says open file erorr on every nbf((
Ideas?
Click to expand...
Click to collapse
Perhaps the Rom package you downloaded is a corrupt download,redownload it and flash or use this RUU :-

Hhhmmm....RUU MUN says "INVALID UPDATE TOOL" "cant be used for this device" I dont understand what is wrong

Thanx A Lot For Help!!!i've Done It! It Finally Works!__:d

yellowmegaman said:
Thanx A Lot For Help!!!i've Done It! It Finally Works!__:d
Click to expand...
Click to collapse
Thanks !
Glade to hear its working

Related

Bricked?

My Wizard keeps starting up in the boot (rainbow) screen,
it says:
IPL 2.21.0001
SPL 2.21
Is it bricked? If i connect the phone "USB" appears in the down left corner, but activesync doesn't seem to react.
What to do?
As is in bootloader , not bricked
so reflash with new rom but be sure it is cid unlocked
lmd0990 said:
As is in bootloader , not bricked
so reflash with new rom but be sure it is cid unlocked
Click to expand...
Click to collapse
I've tried to update with the official MDA ROM, but i get an 294 error, invalid Vendor ID, what should i do now?
U may try another roms
It seems that i can't upgrade it with any rom, which one should i use?
I tried 2 different Roms, the program does the update and tells me it was a succes, but at restart i get the same rainbow screen....
CIDlocked?
kubek1334 said:
CIDlocked?
Click to expand...
Click to collapse
I Think so, i'd never removed it....
Soo...
Nothing you can do.. [except imei-check]
Maybe try to load an official rom or Wizard Love
And read about G4 version.
I see that you tried to load an SPL rom
I think that you are lucky.
You only have HalfBricked Wizard )
kubek1334 said:
Soo...
Nothing you can do.. [except imei-check]
Maybe try to load an official rom or Wizard Love
And read about G4 version.
I see that you tried to load an SPL rom
I think that you are lucky.
You only have HalfBricked Wizard )
Click to expand...
Click to collapse
If i try to load the official ROM i get Error 294 [Invalid Vendor ID] and the love ROM won't install, get error 300...
try the mun's ruu. [Read topic about HardSPL]
Tried it to, no luck either.
try wizard service tool v 4.2.2 (WST) , get it from wizard forum ,,,,,, good luck
lmd0990 said:
try wizard service tool v 4.2.2 (WST) , get it from wizard forum ,,,,,, good luck
Click to expand...
Click to collapse
downloaded it, but WST doesn't find my Wizard...big paperweight
Use another update tool... Search for: ROMUpdateUtility_Wizard_NoID.exe
yes download RomUpdateUtility_Wizard_NoID , then put .nbf rom file in folder
i think it will solve it ,,,,,,,,,,,,,, good luck
lmd0990 said:
yes download RomUpdateUtility_Wizard_NoID , then put .nbf rom file in folder
i think it will solve it ,,,,,,,,,,,,,, good luck
Click to expand...
Click to collapse
Tried above, but no luck. Now stands "RUU" in the upper right corner, what's up with that?
is there also USB in lower left conrner???
lmd0990 said:
is there also USB in lower left conrner???
Click to expand...
Click to collapse
Yes it is,
it has broken SPL (2.21 - its G3 not G4)
Cidlocked.
Only what's left is imei-check

Can anyone help my M600?? Please!

Hi, I have been running Gollum's Prophet Touch VII on my M600 for ages now and fancied a change, I decided to dl varanusvincent's 'my diamind edition 2' and ran the g4 rom update that came with it, my m600 now is sat in the 3 colour bootloader screen with IPL 2.10.0001 and SPL 2.20.0001 and I cant get it to do anything, hard reset just puts it back to the bootloader screen, can ANYONE help me please or have I wrecked it by trying to install a new rom?
thanks
Mike
I've reset it again and it is now stuck on the 'qtek keep the world as one' screen with ipl and spl in the top left corners, the uodate programmes all say that is disconnected if i try and use them any ideas??
have you read how to upgrade it????
You haven't HARDSPL.
READ HERE to recovery your Prophet
I have already read over that entire post before I put this on, didnt want to look an idiot - no luck there then!
I have tried to use the hard spl folder upgrade and it still only gives me the 3 colours bootscreen after a hard reset, step 2 says use bootloader mode and flash pvtemp but I've looked everywhere for pvtemp and cant find it to dl
82mike said:
I have already read over that entire post before I put this on, didnt want to look an idiot - no luck there then!
I have tried to use the hard spl folder upgrade and it still only gives me the 3 colours bootscreen after a hard reset, step 2 says use bootloader mode and flash pvtemp but I've looked everywhere for pvtemp and cant find it to dl
Click to expand...
Click to collapse
with SPL information that you said. It said, that your Device is not HARDSPL already.
You have to succesfully HARDSPL your Device first.
And after that you wont face anyproblem again.
Download :
PDVIET Temp
Is your Device CID Lock?
So I dl PDAViet, flash with that, run HARDSPL with my new .nbf in that file and I should be ok? No idea about CID lock, thanks for helping
82mike said:
So I dl PDAViet, flash with that, run HARDSPL with my new .nbf in that file and I should be ok? No idea about CID lock, thanks for helping
Click to expand...
Click to collapse
So you have to Flash your ROM now with PDA Viet Temp first. This will bring your device to WM5 No Vendor.
You have to flash it through bootloader mode, since your device now stuck up.
After that , HARDSPL your Device.
Read better thread from animelover. Here
If your Device is a G3, SPL Information will be changed into 2.G3.4PDA or for a G4 is 2.G4.4PDA
And after your Device HARDSPL ready. Run the Upgrade tool from My ROM. So you wont stuck up again.
It should run.
thats great, im running pdaviet now, read the page about hardspl too so i'll install this, turn on my m600 and run hardspl g4 followed by your rom - thanks!!
82mike said:
thats great, im running pdaviet now, read the page about hardspl too so i'll install this, turn on my m600 and run hardspl g4 followed by your rom - thanks!!
Click to expand...
Click to collapse
I will update the ROM. A small registry failure. Not so important actually.
Just wait .
I am uploading this ROM now.
You can Hardspl your Device first anyway.
Done!!! Hard SPL'd now says 2.g4.4pda on booting! I'll hang on for the new rom to be uploaded, if i want to change roms again to I have to run pda viet or now that I have run hardspl can I just install over the top? sorry for all the q's and thanks for all your help
82mike said:
Done!!! Hard SPL'd now says 2.g4.4pda on booting! I'll hang on for the new rom to be uploaded, if i want to change roms again to I have to run pda viet or now that I have run hardspl can I just install over the top? sorry for all the q's and thanks for all your help
Click to expand...
Click to collapse
If you have HARDSPL.
And Your SPL Information changed into 2G4.4PDA .
No need to install PDAViet again.
Just run the installer from the cooker.

Pda Blocked after flashing ! Help me please !

Good Morning,
- on my Jamin I've installed HardSpl (operation all ok)...
- after I've installed Throttle Diamond I Multilanguage ITA (operation all ok)...
- but when flashing is termined the jamin was "off" and after automaticaly "on"
but after was blocked on "3 color bootup"...
- so, after I've re-installed HardSpl (operation all ok)...
- when operation in termined the jamin was "off" and after automaticaly "on"
but after, and now, is blocked on first screen "i-mate" where are the
follows number: IPL 2.13
SPL 2.13.0000
GSM 02.19.21
is possible for you help me ?
thank you in advance and excuse me for my bad english, regards, mauro
... for exit from this situation I've removed and released the battery and
now the pda is blocked on "3 color bootup"...
http://www.badongo.com/file/3633747
the easiest way is flash it back to pdamobiz step1 u can flash it from the bootloader screen
after that flash it to any rom u desire
mauchit said:
Good Morning,
- on my Jamin I've installed HardSpl (operation all ok)...
IPL 2.13
SPL 2.13.0000
thank you in advance and excuse me for my bad english, regards, mauro
Click to expand...
Click to collapse
- with this information SPL 2.13.0000 Your HardSPL is unsucceses. ( SPL: G3.4DPA not 2.13.0000)
- If you flash ROM 6.1 without Hardspl device will stuck at bootloader ( tricolor)
=> flashing Romship ( or Step1, PV_temp ...) and hardSPL againt pls
Innova said:
- with this information SPL 2.13.0000 Your HardSPL is unsucceses. ( SPL: G3.4DPA not 2.13.0000)
- If you flash ROM 6.1 without Hardspl device will stuck at bootloader ( tricolor)
=> flashing Romship ( or Step1, PV_temp ...) and hardSPL againt pls
Click to expand...
Click to collapse
yes that's the problem and the exact solution
I think you mauchit are new here so (Step1, PV_temp) it also means back to WM5
thanks for your contributions,
but from the current situation (tricolor) as I go out?
what steps should I follow?
mostafa0007 reason you are, I'm new and not very experienced
mauchit said:
thanks for your contributions,
but from the current situation (tricolor) as I go out?
what steps should I follow?
mostafa0007 reason you are, I'm new and not very experienced
Click to expand...
Click to collapse
go and look @ the sticky post of mine... ^_^
Hello,
I followed your instructions which enabled me to get the pda, I returned to the original WM5, with:
IPL 2.13
SPL 2.20.000
GSM 02.47.21
OS 2.20.7.34
I rebuilt the steps to install HardSpl on pda, all went ok, but finished the procedure I find all equal:
IPL 2.13
SPL 2.20.000
GSM 02.47.21
OS 2.20.7.34
HardSpl therefore is not installed?
I tried all the files for HardSpl that I found on this forum always without success, the last that I have installed, and the procedure is finished ok, is this (ProphetSPLTool.zip x 3g) that I found here:
http://forum.xda-developers.com/showthread.php?t=401326
mauchit said:
Hello,
I followed your instructions which enabled me to g....
Click to expand...
Click to collapse
you may try to flash with " Lazy_Tool "
.....
dioxda2 said:
you may try to flash with " Lazy_Tool "
.....
Click to expand...
Click to collapse
I had already tried, I Try now, unfortunately, clicking twice on upgrade.cmd not open the program on the PC, I can not (on the pc I have windows xp) ...
mauchit said:
I had already tried, I Try now, unfortunately, clicking twice on upgrade.cmd not open the program on the PC, I can not (on the pc I have windows xp) ...
Click to expand...
Click to collapse
excuse if i ask silly questions, but its only to try and help. Wot exactly are the steps u did to hardspl? Did you interuprt the process or did ur device restart after hardspl? if you have followed the many good guides to get to hardpsl stage then u shuld not have problems? you have obv done aku2.2 b4 hardspl. i used Jesterz method and flashed his aku2.2 rom then hardspl, after 4 attempts it worked, try using different usb ports on ur pc/laptop, i had to try 3 out of 4 ports before it was sucessfull and remove all other usb cables from machine
I have tried in every way that I read on the forum xda but I could not install HardSPL on my jamin
mauchit said:
I have tried in every way that I read on the forum xda but I could not install HardSPL on my jamin
Click to expand...
Click to collapse
try this : http://forum.xda-developers.com/showthread.php?t=377904
Use Lazy tool. Download the full folder, remove any restriction on each program in the folder(unblock, read only etc). IF still doesnt work, open using command line. sure will work
Hi, i facing the same problem here:
IPL:1.00
SPL : 2.G3.4PDA
This mean i already on HardSPL, but how come i still not ablem to flash it to WM6... already try many ROM including jumpSPL. Manage to complete the flashing but after that it will stuck at Qtek screen...
timmymarsh said:
try this : http://forum.xda-developers.com/showthread.php?t=377904
Click to expand...
Click to collapse
I've tried, even with two different computers, but I can not to open the file Prophet Tools.exe and then I will not start with the procedure...
thank you four your suggestion...
rahulganatra said:
Use Lazy tool. Download the full folder, remove any restriction on each program in the folder(unblock, read only etc). IF still doesnt work, open using command line. sure will work
Click to expand...
Click to collapse
I've tried, with two different computers in every possible way, but I can not open the file Upgrade.cmd, and therefore does not start the procedure ...
anyway tanks for your suggestion ...
saints5354 said:
Hi, i facing the same problem here:
IPL:1.00
SPL : 2.G3.4PDA
This mean i already on HardSPL, but how come i still not ablem to flash it to WM6... already try many ROM including jumpSPL. Manage to complete the flashing but after that it will stuck at Qtek screen...
Click to expand...
Click to collapse
I think that if you have already configured 2.G3.4PDA pda you can install the new rom favorite ...
what problem have you exactly?
this post only for show pda and current configuration...
mauchit said:
I think that if you have already configured 2.G3.4PDA pda you can install the new rom favorite ...
what problem have you exactly?
Click to expand...
Click to collapse
The problem is, whatever ROM i tried, i will complete flashing 100% but it will stuck at Qtek screen forever...
If i flash back to shipped ROM, is end up ok, but no sound no camera.... why ? Somebody pls help....

Bricked Raphel

I restored the stock vodafone rom and then flashed the stock spl now when i turn the phone on i get the spl screen and it say
upgrade rom code error
then i get a grey screen that says Loading... nothing more
lohap said:
I restored the stock vodafone rom and then flashed the stock spl now when i turn the phone on i get the spl screen and it say
upgrade rom code error
then i get a grey screen that says Loading... nothing more
Click to expand...
Click to collapse
How did you flash the original SPL?
As far as I know there is no JumpSPL or SoftSPL for Raphael yet? Or am I wrong?
[EDIT] Sorry, I've seen how it's possible in the Wiki.
Per the instructions at
http://forum.xda-developers.com/showthread.php?t=410150
now it seems to boot the stock spl but with that error
windows doesnt even detect it i think
woop got windows to detect it
problem is i cant flash the hardspl, spl and if i try to flash a stock firmware i get vendor id error, anyone got a full dump of the vodaone uk firmware
Could not you flash the ROM from memory card (when you find any)?
crocodile010 said:
Could not you flash the ROM from memory card (when you find any)?
Click to expand...
Click to collapse
problem is i cant flash the hardspl..........so 1 and 1 is 2,he cannot do that
have u tried getting in touch with olipro or cmonex? or with any members of the elite team? my guess is they are the ones with most technical knowledge of the device so ask one of them help.
ofcourse always be nice and polite and patient as those guys have their plates full
thanks ill send them a pm and see if i need to buy a new device.
hi been told i can fix this with mtty and one got a link to a download and do i need to do anything to the raphel to get it into serial mode

244 invalid Model ID

Hi
Sorry for the bad English im from Germany
I flashed successfully to the 1.30 NoDo Update then i maked an mistake!
i flashed back to 1.09 and then to the Originaly T-Mobile germany! And now i want back to 1.09 to go on the NoDo 1.30 but if i want to update 1.09 i get the Error 244 invalid Model ID how can i fix it????
miagii said:
Hi
Sorry for the bad English im from Germany
I flashed successfully to the 1.30 NoDo Update then i maked an mistake!
i flashed back to 1.09 and then to the Originaly T-Mobile germany! And now i want back to 1.09 to go on the NoDo 1.30 but if i want to update 1.09 i get the Error 244 invalid Model ID how can i fix it????
Click to expand...
Click to collapse
How are you trying to flash, direct from fle to phone from PC or using y split cable and goldcard? maybe to go back you need to put the ModeID file in te 1.09 folder, like you initially did in the 1.30 folder. See this post
Im flashing directly and i know the Tutorial u gave my i was already on the 1.30 NoDo Update and then i made and Downgrade to 1.09 then to 1.28 Original T-Mobile Rom.
Now i want Update again to 1.30
but if try to Flash the 1.09 Rom ( itried it with three diffrent ModelID.fig) then i get 244 Invalid Model ID
i also have this problem.
i loaded this rom onto my htc : RUU_Mozart_TMO_DE_1.28.111.03_Radio_5.52.09.16_22.24.50.09U_by_ansar
i didnt know that it has the tmobile branding within so i wanted to debrand with the 1.09.but now i always get error 244 invalid model id.isnt there any solution for this?
You have probably updated the SPL with your updates, so the first thing you'll need to do is downgrade that, and then install the ROM again. You can search in ansar posts for how to downgrade the SPL.
ok thx for help,i will try
sry for double post,but i noticed that i already have spl 1.28....
i also noticed i have hardware revision number : NA n i red that its not fixable.is that true?its hard to imagine cuz i didnt really do anything,just flashed this weird branded rom n now cant go back
diaemus9 said:
sry for double post,but i noticed that i already have spl 1.28....
i also noticed i have hardware revision number : NA n i red that its not fixable.is that true?its hard to imagine cuz i didnt really do anything,just flashed this weird branded rom n now cant go back
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1196183
Just try this. If it still has an error, it is probably a big problem.
You have to install this like any other ROM and after installation don't worry about the phone not starting up. Just install RSPL/HSPL and flash any ROM you would like.
no its not working.again it stops at 1 % n then comes error 294 invalid vendor id.
its desperate
diaemus9 said:
no its not working.again it stops at 1 % n then comes error 294 invalid vendor id.
its desperate
Click to expand...
Click to collapse
Have you tried a hard reset before trying to flash ? And have you installed RSPL/HSPL and what version of it ?
well,i made a hard reset now,but somehow after,the data was still on my phone,means phone numbers etc.so i assume the hard reset didnt work.
i also tried to install rspl/hspl.i could install rspl,however when i install hspl my pc says i installed it succesfully.but when i launch boot loader then,it shows me the spl 1.28.xxx i had before rspl and no hspl.
its just freakin frustratin.i dunno what to do anymore
diaemus9 said:
well,i made a hard reset now,but somehow after,the data was still on my phone,means phone numbers etc.so i assume the hard reset didnt work.
i also tried to install rspl/hspl.i could install rspl,however when i install hspl my pc says i installed it succesfully.but when i launch boot loader then,it shows me the spl 1.28.xxx i had before rspl and no hspl.
its just freakin frustratin.i dunno what to do anymore
Click to expand...
Click to collapse
In order to install hspl you need to run rspl first, so if rspl doesent run you can't install hspl... You've probably flashed some really bad ROM.
The last thin that i can suggest is to try to flash some older ROM or the rom that now is in the phone and then try to flash something else... but i doubt it will work without RSPL/HSPL
like i said,i did install rspl,then right after it hspl,pc says its fine but my device shows old spl after installation.it did show the rspl in boot loader but not hspl.
well i try that but doubt it will work.thx for ur effort anyway
diaemus9 said:
like i said,i did install rspl,then right after it hspl,pc says its fine but my device shows old spl after installation.it did show the rspl in boot loader but not hspl.
well i try that but doubt it will work.thx for ur effort anyway
Click to expand...
Click to collapse
Try downloading another version of RSPL/HSPL
http://forum.xda-developers.com/showthread.php?t=1195647
These are the ones that i have used. If this doesent help idk what to do next...
anyway if you cannot install HSPL then its not possible to install a ROM.
nope its no use.everything i try stops at 1%.
this is useless,looks like i can put this phone into trash.the thing that makes me mad is that i could flash everything before,then flashed a rom from this forum n now thi...
diaemus9 said:
nope its no use.everything i try stops at 1%.
this is useless,looks like i can put this phone into trash.the thing that makes me mad is that i could flash everything before,then flashed a rom from this forum n now thi...
Click to expand...
Click to collapse
Actually you've probably made a mistake when you flashed it back... and you've used a bad ROM... so try to ask some more experienced member, maybe they can help... sorry that i couldn't.
no,its not ur fault ,thx for ur effort.
looks like no one can help though,already searched the whole internet.n no one else responses here

Categories

Resources