Hi
Sorry for the bad English im from Germany
I flashed successfully to the 1.30 NoDo Update then i maked an mistake!
i flashed back to 1.09 and then to the Originaly T-Mobile germany! And now i want back to 1.09 to go on the NoDo 1.30 but if i want to update 1.09 i get the Error 244 invalid Model ID how can i fix it????
miagii said:
Hi
Sorry for the bad English im from Germany
I flashed successfully to the 1.30 NoDo Update then i maked an mistake!
i flashed back to 1.09 and then to the Originaly T-Mobile germany! And now i want back to 1.09 to go on the NoDo 1.30 but if i want to update 1.09 i get the Error 244 invalid Model ID how can i fix it????
Click to expand...
Click to collapse
How are you trying to flash, direct from fle to phone from PC or using y split cable and goldcard? maybe to go back you need to put the ModeID file in te 1.09 folder, like you initially did in the 1.30 folder. See this post
Im flashing directly and i know the Tutorial u gave my i was already on the 1.30 NoDo Update and then i made and Downgrade to 1.09 then to 1.28 Original T-Mobile Rom.
Now i want Update again to 1.30
but if try to Flash the 1.09 Rom ( itried it with three diffrent ModelID.fig) then i get 244 Invalid Model ID
i also have this problem.
i loaded this rom onto my htc : RUU_Mozart_TMO_DE_1.28.111.03_Radio_5.52.09.16_22.24.50.09U_by_ansar
i didnt know that it has the tmobile branding within so i wanted to debrand with the 1.09.but now i always get error 244 invalid model id.isnt there any solution for this?
You have probably updated the SPL with your updates, so the first thing you'll need to do is downgrade that, and then install the ROM again. You can search in ansar posts for how to downgrade the SPL.
ok thx for help,i will try
sry for double post,but i noticed that i already have spl 1.28....
i also noticed i have hardware revision number : NA n i red that its not fixable.is that true?its hard to imagine cuz i didnt really do anything,just flashed this weird branded rom n now cant go back
diaemus9 said:
sry for double post,but i noticed that i already have spl 1.28....
i also noticed i have hardware revision number : NA n i red that its not fixable.is that true?its hard to imagine cuz i didnt really do anything,just flashed this weird branded rom n now cant go back
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1196183
Just try this. If it still has an error, it is probably a big problem.
You have to install this like any other ROM and after installation don't worry about the phone not starting up. Just install RSPL/HSPL and flash any ROM you would like.
no its not working.again it stops at 1 % n then comes error 294 invalid vendor id.
its desperate
diaemus9 said:
no its not working.again it stops at 1 % n then comes error 294 invalid vendor id.
its desperate
Click to expand...
Click to collapse
Have you tried a hard reset before trying to flash ? And have you installed RSPL/HSPL and what version of it ?
well,i made a hard reset now,but somehow after,the data was still on my phone,means phone numbers etc.so i assume the hard reset didnt work.
i also tried to install rspl/hspl.i could install rspl,however when i install hspl my pc says i installed it succesfully.but when i launch boot loader then,it shows me the spl 1.28.xxx i had before rspl and no hspl.
its just freakin frustratin.i dunno what to do anymore
diaemus9 said:
well,i made a hard reset now,but somehow after,the data was still on my phone,means phone numbers etc.so i assume the hard reset didnt work.
i also tried to install rspl/hspl.i could install rspl,however when i install hspl my pc says i installed it succesfully.but when i launch boot loader then,it shows me the spl 1.28.xxx i had before rspl and no hspl.
its just freakin frustratin.i dunno what to do anymore
Click to expand...
Click to collapse
In order to install hspl you need to run rspl first, so if rspl doesent run you can't install hspl... You've probably flashed some really bad ROM.
The last thin that i can suggest is to try to flash some older ROM or the rom that now is in the phone and then try to flash something else... but i doubt it will work without RSPL/HSPL
like i said,i did install rspl,then right after it hspl,pc says its fine but my device shows old spl after installation.it did show the rspl in boot loader but not hspl.
well i try that but doubt it will work.thx for ur effort anyway
diaemus9 said:
like i said,i did install rspl,then right after it hspl,pc says its fine but my device shows old spl after installation.it did show the rspl in boot loader but not hspl.
well i try that but doubt it will work.thx for ur effort anyway
Click to expand...
Click to collapse
Try downloading another version of RSPL/HSPL
http://forum.xda-developers.com/showthread.php?t=1195647
These are the ones that i have used. If this doesent help idk what to do next...
anyway if you cannot install HSPL then its not possible to install a ROM.
nope its no use.everything i try stops at 1%.
this is useless,looks like i can put this phone into trash.the thing that makes me mad is that i could flash everything before,then flashed a rom from this forum n now thi...
diaemus9 said:
nope its no use.everything i try stops at 1%.
this is useless,looks like i can put this phone into trash.the thing that makes me mad is that i could flash everything before,then flashed a rom from this forum n now thi...
Click to expand...
Click to collapse
Actually you've probably made a mistake when you flashed it back... and you've used a bad ROM... so try to ask some more experienced member, maybe they can help... sorry that i couldn't.
no,its not ur fault ,thx for ur effort.
looks like no one can help though,already searched the whole internet.n no one else responses here
Related
My qtek 9100 is dead(((
I think (iam almost shure ) taht it is g4.It starts and show a bootloader rgb
ipl 1.01
spl 1.01
RUU at the top-right corner
usb at the bottom-left (when connected to computer)
It was never unlocked in anyway.
My friend tryed to flash it with wm6 but then the clouds appered it hanged.
We've tryed to flash it with anothe rom but it just got worste - it shows only the bootloader
I've tryed wizard_love but it says that something wrong at the beggining.Other roms are hanging on 95% or 96% and swows an error
Please can you help me?shelltool is not flashing because it's cabs are not installed....And i dunno what to do iunderstood that i need some rom that ran be flashed to locked device.can you help with some links\faq's?
Sorry for my bad english....
thanx in advance....
yellowmegaman said:
My qtek 9100 is dead(((
I think (iam almost shure ) taht it is g4.It starts and show a bootloader rgb
ipl 1.01
spl 1.01
RUU at the top-right corner
usb at the bottom-left (when connected to computer)
It was never unlocked in anyway.
My friend tryed to flash it with wm6 but then the clouds appered it hanged.
We've tryed to flash it with anothe rom but it just got worste - it shows only the bootloader
I've tryed wizard_love but it says that something wrong at the beggining.Other roms are hanging on 95% or 96% and swows an error
Please can you help me?shelltool is not flashing because it's cabs are not installed....And i dunno what to do iunderstood that i need some rom that ran be flashed to locked device.can you help with some links\faq's?
Sorry for my bad english....
thanx in advance....
Click to expand...
Click to collapse
IPL/SPL 1.01 is not a G4 ,its a G3 phone,its not flashing wm6 coz its CID locked. As long as it gets into Bootloaders mode (RGB) screen,its safe.Don't flash with Shell Tool.Just download the official carrier's rom and flash it in Bootloaders mode,it'll recover back,than get it SIM/CID unlocked and then upgrade to any wm6 rom.
Now i've reached some success.I'v downloaded ROMUpdateUtility_Wizard_NoID.exe and used it with wizard love but i just reboots after a minute of clouds(((What i need to do?find a original rom and flash it?
yellowmegaman said:
Now i've reached some success.I'v downloaded ROMUpdateUtility_Wizard_NoID.exe and used it with wizard love but i just reboots after a minute of clouds(((What i need to do?find a original rom and flash it?
Click to expand...
Click to collapse
Download the official rom from here and flash it :-
http://s131209249.online.de/vodafone_software/9100.htm
Great thnx for help!!!!I'll try it and will post the result in few minutes.Hope u will still be here!
Nope.no luck(
Official rom that u advised to flash says vendor error and than tried to flash with romUpdater-noid it says open file erorr on every nbf((
Ideas?
yellowmegaman said:
Nope.no luck(
Official rom that u advised to flash says vendor error and than tried to flash with romUpdater-noid it says open file erorr on every nbf((
Ideas?
Click to expand...
Click to collapse
Perhaps the Rom package you downloaded is a corrupt download,redownload it and flash or use this RUU :-
Hhhmmm....RUU MUN says "INVALID UPDATE TOOL" "cant be used for this device" I dont understand what is wrong
Thanx A Lot For Help!!!i've Done It! It Finally Works!__:d
yellowmegaman said:
Thanx A Lot For Help!!!i've Done It! It Finally Works!__:d
Click to expand...
Click to collapse
Thanks !
Glade to hear its working
I restored the stock vodafone rom and then flashed the stock spl now when i turn the phone on i get the spl screen and it say
upgrade rom code error
then i get a grey screen that says Loading... nothing more
lohap said:
I restored the stock vodafone rom and then flashed the stock spl now when i turn the phone on i get the spl screen and it say
upgrade rom code error
then i get a grey screen that says Loading... nothing more
Click to expand...
Click to collapse
How did you flash the original SPL?
As far as I know there is no JumpSPL or SoftSPL for Raphael yet? Or am I wrong?
[EDIT] Sorry, I've seen how it's possible in the Wiki.
Per the instructions at
http://forum.xda-developers.com/showthread.php?t=410150
now it seems to boot the stock spl but with that error
windows doesnt even detect it i think
woop got windows to detect it
problem is i cant flash the hardspl, spl and if i try to flash a stock firmware i get vendor id error, anyone got a full dump of the vodaone uk firmware
Could not you flash the ROM from memory card (when you find any)?
crocodile010 said:
Could not you flash the ROM from memory card (when you find any)?
Click to expand...
Click to collapse
problem is i cant flash the hardspl..........so 1 and 1 is 2,he cannot do that
have u tried getting in touch with olipro or cmonex? or with any members of the elite team? my guess is they are the ones with most technical knowledge of the device so ask one of them help.
ofcourse always be nice and polite and patient as those guys have their plates full
thanks ill send them a pm and see if i need to buy a new device.
hi been told i can fix this with mtty and one got a link to a download and do i need to do anything to the raphel to get it into serial mode
Dear all,
I am facing a problem here.
Had a hardware problem with the built in microphone and had to revert back to stock rom/splash screen/Original SPL in that order.
Had no problems reverting the ROM and the original screen back (just a couple of flashes), BUT when I tried to revert back the stock SPL here http://forum.xda-developers.com/attachment.php?attachmentid=110582&d=1220406410
I renamed the file to RAPHIMG.nbh, copied it to the root of the SD Card and entered bootloader mode and this is what it displays:
RAPH100
SPL-1.90.0000 (Which means a successful flash)
!!! AND THEN THIS !!!
"Upgrade ROM code error"
"Please try again"
This message is located in the last part of the green stripe in the tri color screen (bootloader)
It is then followed by the grey screen automatically which you are supposed to press volume key to start a flash process BUT it just HANGS at Loading...
unabling you to flash anything.
It's actually a friend's phone too so I guess you understand how hard it is....
Any help is appreciated
Thanks in advance
Possible image might be corrupt on sd card, grey screen is shown when it's trying to read sd, have you tried with sd removed? if you get to 2nd tricolor screen with sd removed i would use usb flash to restore it to working order..
Da_G said:
Possible image might be corrupt on sd card, grey screen is shown when it's trying to read sd, have you tried with sd removed? if you get to 2nd tricolor screen with sd removed i would use usb flash to restore it to working order..
Click to expand...
Click to collapse
Removed the SD and it stays at the tricolor screen with the spl version as mentioned in 1st post.
Also, displaying the Upgrade ROM code error, please try again message
The mode is currently serial
What can I do from here?
fireblade63 said:
Dear all,
I am facing a problem here.
Had a hardware problem with the built in microphone and had to revert back to stock rom/splash screen/Original SPL in that order.
Had no problems reverting the ROM and the original screen back (just a couple of flashes), BUT when I tried to revert back the stock SPL here http://forum.xda-developers.com/attachment.php?attachmentid=110582&d=1220406410
I renamed the file to RAPHIMG.nbh, copied it to the root of the SD Card and entered bootloader mode and this is what it displays:
RAPH100
SPL-1.90.0000 (Which means a successful flash)
!!! AND THEN THIS !!!
"Upgrade ROM code error"
"Please try again"
This message is located in the last part of the green stripe in the tri color screen (bootloader)
It is then followed by the grey screen automatically which you are supposed to press volume key to start a flash process BUT it just HANGS at Loading...
unabling you to flash anything.
It's actually a friend's phone too so I guess you understand how hard it is....
Any help is appreciated
Thanks in advance
Click to expand...
Click to collapse
You cannot flash an SPL from the bootloader. You need to use SSPL. The directions can be found in the HardSPL thread.
NotATreoFan said:
You cannot flash an SPL from the bootloader. You need to use SSPL. The directions can be found in the HardSPL thread.
Click to expand...
Click to collapse
Hey man, thx for stopping by..
If I understand correctly, SSPL runs through the device which is stuck at bootloader currently... or am I hopefully wrong??
If you're at the tricolor screen and it reads serial, that should be fine.. plug in usb and it should switch to usb.. then flash a stock carrier rom through usb.. that should get you up and running and you can then run sspl and flash your spl
Da_G said:
If you're at the tricolor screen and it reads serial, that should be fine.. plug in usb and it should switch to usb.. then flash a stock carrier rom through usb.. that should get you up and running and you can then run sspl and flash your spl
Click to expand...
Click to collapse
Keep in mind im currently on stock SPL, do u think flashing the stock ROM is ok?
That's exactly why i suggested stock ROM, stock SPL will only accept stock ROM's (it will overwrite the spl too so make sure the stock rom you are using is the right one)
dude....i hate to say this...butyou might be s.o.l. at this point. i did the same to my fuze not too long ago... tryingto flash anything to the phone just locks it up.i was lucky enough to bs my way through an att guy to get me a new one (was still under the 30 day warranty).
Da_G said:
That's exactly why i suggested stock ROM, stock SPL will only accept stock ROM's (it will overwrite the spl too so make sure the stock rom you are using is the right one)
Click to expand...
Click to collapse
That's wt Im trying now, tried to flash 2 ROMs already and stops at 2% saying Invalid Vendor ID
I gess I'm using wrong shipped roms till now
fireblade63 said:
That's wt Im trying now, tried to flash 2 ROMs already and stops at 2% saying Invalid Vendor ID
I gess I'm using wrong shipped roms till now
Click to expand...
Click to collapse
I had the same problem as you and could not flash any rom, Always get Invalid vendor ID.
You need the right Stock Rom to flash and in my case in the middleeast, the Stock Rom is so far only available in at HTC.
I had to take the phone to HTC Service Center and they flashed the correct Stock Rom and charged me as they did it out of warranty.
Regards
fireblade63 said:
That's wt Im trying now, tried to flash 2 ROMs already and stops at 2% saying Invalid Vendor ID
I gess I'm using wrong shipped roms till now
Click to expand...
Click to collapse
Sorry about my last post... I misread your issue.
If you flashed the stock 1.90 SPL from the HardSPL thread, then you will need to ask Olipro (or cmonex) which WWE ROM it originated from. That ROM is the ONLY one your phone will accept.
The steps in reverting SPL for warranty / return state to always do the ROM first so that you do not run into this problem. I had the same issue when I was testing a US 3G Diamond I bought from Best Buy (to become acclimated to TF3D prior to the Fuze's release). I restored the SPL first, and then couldn't get Dutty's ROM off the phone, because I could not locate a downloadable version of the WWE ROM that phone came with. [Luckily, Best Buy Mobile's employees in KOP, PA aren't too clever, and I was able to convince them that the phone came that way. ]
NotATreoFan said:
Sorry about my last post... I misread your issue.
If you flashed the stock 1.90 SPL from the HardSPL thread, then you will need to ask Olipro (or cmonex) which WWE ROM it originated from. That ROM is the ONLY one your phone will accept.
The steps in reverting SPL for warranty / return state to always do the ROM first so that you do not run into this problem. I had the same issue when I was testing a US 3G Diamond I bought from Best Buy (to become acclimated to TF3D prior to the Fuze's release). I restored the SPL first, and then couldn't get Dutty's ROM off the phone, because I could not locate a downloadable version of the WWE ROM that phone came with. [Luckily, Best Buy Mobile's employees in KOP, PA aren't too clever, and I was able to convince them that the phone came that way. ]
Click to expand...
Click to collapse
Hmm, then I need to know from which ROM the SPL originated and then flash it.
Thing is, some of the shipped roms available at wiki are just nbh files..
I tried flashing with the wrapper exe and the RaphaelCustomRUU.exe and still all roms I've downloaded don't seem to work.
It's a RAPH100 untied to a network.
fireblade63 said:
Hmm, then I need to know from which ROM the SPL originated and then flash it.
Thing is, some of the shipped roms available at wiki are just nbh files..
I tried flashing with the wrapper exe and the RaphaelCustomRUU.exe and still all roms I've downloaded don't seem to work.
It's a RAPH100 untied to a network.
Click to expand...
Click to collapse
Post in the HardSPL thread asking which ROM the SPL originated from. Once you know that, you can download the appropriate ROM from the Wiki.
NotATreoFan said:
Sorry about my last post... I misread your issue.
If you flashed the stock 1.90 SPL from the HardSPL thread, then you will need to ask Olipro (or cmonex) which WWE ROM it originated from. That ROM is the ONLY one your phone will accept.
The steps in reverting SPL for warranty / return state to always do the ROM first so that you do not run into this problem. I had the same issue when I was testing a US 3G Diamond I bought from Best Buy (to become acclimated to TF3D prior to the Fuze's release). I restored the SPL first, and then couldn't get Dutty's ROM off the phone, because I could not locate a downloadable version of the WWE ROM that phone came with. [Luckily, Best Buy Mobile's employees in KOP, PA aren't too clever, and I was able to convince them that the phone came that way. ]
Click to expand...
Click to collapse
SPL has nothing to do with the Invalid Vendor ID Error, It is the CID. In another word you can flash SPL 1.95 and still can not flash the AT Rom 1.95.502.5 because the CID is different.
Regards
ViperBJK's QMAT features GoldCard generator for current HTC devices that can force RUU to bypass CID check.
Do you know what is the CID of your device?
shafez said:
SPL has nothing to do with the Invalid Vendor ID Error, It is the CID. In another word you can flash SPL 1.95 and still can not flash the AT Rom 1.95.502.5 because the CID is different.
Regards
Click to expand...
Click to collapse
The CID is determind by the SPL.
Look up the error code posted... everything points to HardSPL. Back in my Wizard days, HardSPL did not exist, and we just did a CID unlocking. This is not the case with newer devices.
All ROMs are not created equal. Each WWE ROM checks for specific information within the SPL, and if it doesn't find what it's expecting, fail...
stepw said:
ViperBJK's QMAT features GoldCard generator for current HTC devices that can force RUU to bypass CID check.
Do you know what is the CID of your device?
Click to expand...
Click to collapse
I'm not sure
Where can I know that?
@NotATreoFan && Shafez,
I remember from TyTNII day when Shafez suggested extracting 3.29 and 28 SPLs from the newer shipped 6.1's for a better responsive device.
We could extract and build with htc rom tool if I remember the name of the tool correctly.
Do we have a tool as such compatible with TP? (agreeing with NotATreoFan here)
@Shafez,
Since you think it is not SPL and it is a CID issue, what can I do about it?
Sending it to SVC for repair out of warranty is an option but I'd like to leave it as my last.
Did they provide the ROM or they flashed it for you?
Were u able to make raw files out of it for future use or any1 else has it?
Thx guys and keep the help coming
fireblade63 said:
@NotATreoFan && Shafez,
I remember from TyTNII day when Shafez suggested extracting 3.29 and 28 SPLs from the newer shipped 6.1's for a better responsive device.
We could extract and build with htc rom tool if I remember the name of the tool correctly.
Do we have a tool as such compatible with TP? (agreeing with NotATreoFan here)
@Shafez,
Since you think it is not SPL and it is a CID issue, what can I do about it?
Sending it to SVC for repair out of warranty is an option but I'd like to leave it as my last.
Did they provide the ROM or they flashed it for you?
Were u able to make raw files out of it for future use or any1 else has it?
Thx guys and keep the help coming
Click to expand...
Click to collapse
Since you cannot get past the bootloader, your only option is to find the WWE ROM that matches the SPL you flashed. Even though the HTC ROM Tool "signs" the NBH file, it still won't fool the stock bootloader... if it did, we wouldn't need HardSPL.
he guys, i posted this thread a while ago
http://forum.xda-developers.com/showthread.php?p=7913347#post7913347
and i tried the 2nd advice.... i did the task 29 and all was removed....
i had the HSPL 1.42. and according to the steps posted there, i install the 2.08 HSPL version on my mobile...i tried to install the
RUU_Leo_HTC_WWE_1.48.405.2_Radio_Signed_15.28.50.07U_2.05.51.05_2_Ship
and it is not working.....so i put it back to HSPL 1.42......... now its not installing the ROM....
wat am i supposed to do? help guys......
djameel said:
he guys, i posted this thread a while ago
http://forum.xda-developers.com/showthread.php?p=7913347#post7913347
and i tried the 2nd advice.... i did the task 29 and all was removed....
i had the HSPL 1.42. and according to the steps posted there, i install the 2.08 HSPL version on my mobile...i tried to install the
RUU_Leo_HTC_WWE_1.48.405.2_Radio_Signed_15.28.50.07U_2.05.51.05_2_Ship
and it is not working.....so i put it back to HSPL 1.42......... now its not installing the ROM....
wat am i supposed to do? help guys......
Click to expand...
Click to collapse
Flash to HSPL, and flash a Custom ROM and see if it works.
here on my screen its like this
PB81100 HX-BC
SPL_1.42.HSPL XE
0x05
costullaHSPL 0x40
Upgrade ROM code error
Please try again
wat am i supposed to do?
hmmm gaarry how do we flash to HSPL?
you already have hspl, try flashing a different rom, or download the one you want again.
ok well i gave it a try still not working stuck on 9 % and saying upgrade ROM code error
will this ROM be compatible
Energy.Leo.21914.Sense2.5.Cookie.DinikGlass.Aug.28.7z
here's the link http://forum.xda-developers.com/showthread.php?t=654504
i think you ned to go back to stock and start again.
Go to the t mobile website and get the 2.13 rom and flash that.
can u please give me a link for the 2.13 ROM ?????
please
ill be grateful...
Guys when using the task29 program , it installed the 2.00....version on my mobile....i dont know wat it means
all i know that now i dont have any rom on my mobile...right...
so now can i install any version of ROM on my mobile?????
@samsamuel: thk u for your advices... can u please tell me where can i get the 2.13 ROM coz when i bought the mobile there wasnt any brand name on it, i.e. no T-mobile......on it
i went to the Tmobile site and didnot find anything....
can this be installed on my mobile
RUU_Leo_HTC_WWE_1.43.405.1_Radio_Signed_15.26.50.07U_2.04.50_22_2_Ship
Sry guys for my ignorance and lack of knowledge on windows mobile....just that u guys are awesome always coming up with new Roms which are interesting to use.....i just wanted to try one and now im in a mess
ahh sorry, i thought you had a t mobile, but you dont, thats my mistake.
Go HERE, first post, first link. pick a folder for version you want, for example the 1.66 folder for a 1.66 version rom. Grab one that says HTC WWE
That would be the stock HTC unbranded rom.
Try flashing that, see what happens.
thank u , ill try it and see what happens?
i have both.....already downloaded them a while ago....non is working....stuck on 0 %......
go into bootloader (power off, hold and keep holding volume down, tap and release power)
What does it say next to 'spl'? (check now, please, dont just tell me what you think it says )
im writing everything that is written ok
PB81100 HX-BC
SPL-1.42.HSPL XE
0x05
CotullaHSPL 0x40
Sorry for late reply wasnt at home....
hmm so its deffinately got hspl installed.
and you say you have tried the wwe HTC 1.66 rom?
try it again, to be sure.
Grab THIS one (1.66 HTC WWE) and flash it using usb.
Meanwhile, do you know what your original rom was? Was your phone provider locked? (Meaning do you need an o2 rom, or a t mobile rom, or whatever)
mine was in russian....i bought in ukraine while i was studying there..... thats why i said allmy money went in the phone...lol
so i was using it in russian.. then i installed the 1.48...WWE from tom codon....was working out fine except that the programs i wanted to install werent working..not even skype( old version i read some post that skype works on hd2)..
so i looked for another ROM got the 1.43 WWE.. didnt workfine gets restarted again and again....then has been like that...the heating up of the mobile + its restarting....
ill try your link ,,, the 1.66......btw thks
ahhh ok. Now im not sure about this, but i have heard in the past that russian devices can have issues when flashing different roms, but i dont understand why this would be,
give this one a try
RUU_Leo_HTC_RUS_1.48.411.1_Radio_Signed_15.28.50.0 7U_2.05.51.05_2_Ship.exe
its in leo official roms, first post first thread 1.48 folder.
the russian ROM link is a dead one....
im getting that one from htcpedia http://htcpedia.com/official_wm_rom_htc_hd_leo_russian_version/soft/htc-leo-rom.html
got the 1.48 version from this one http://www.4shared.com/dir/25026486/e973b316/Leo_148.html
ill try and tell u...1st ill try the 1.66 roms...
@samsamuel, thks for your message...
Does this means that for the 1.66 ROM im installing, i will be needing the 1.66HSPL....
any way the 1.66 rom got stuck on 8%....what does that mean coz the other roms also did the same? ( coz before when i first installed the WWE 1.48 version, there was no problem)
ill try the russian ROM and tell you..
any version hspl will work, (or at least it will in normal circumstances)
yours seems to be a complicated problem, not the usual flashing problems, and all i can suggest is that if the russian rom doesn't work over usb, you can try it from sd card, which "should" completely reset the rom, radio and spl back to stock.
heading to bed, good luck!
Well none worked.....at first the 1.66 ROM was up to 100% and it finished installing...but when it rebooted, the phone remained on the white screen.... the russian stuck on 8%...
i was doing through the sd card but the phone got turn off and now the phone is not even charging itself ...its not turning back on.............
can anything happen to the hardware?
[SOLVED] Just Flashed the correct official ship rom from HTC site using my HD2 Serial Number... It works like a charm. SPL has downgraded to 1.46
Thanks everyone who helping...
Just Flashing Stock Rom RUU_Leo_S_HTC_WWE_3.14.405.2_Radio_15.42.50.11U_2. 15.50.14_LEO_S_Ship.exe, I got stuck in bootloder.
- Error 294 Invalid Vender ID
- SPL 3.03.0000 can't HSPL-ed with HSPL3, SPL 3.03 is't listed as supported SPL
Flashed RUU_Leo_HTC_WWE_1.66.405.2_Radio_Signed_15.30.50.07U_2.06.51.07_Ship.exe, still stuck on bootloader.
- Error 294 Invalid Vender ID
- SPL 3.03.0000
- on boot loader screen said: Update fail code error, please try again
Try to get stock rom from HTC official site, but no rom suitable for S/N I entered.
Need help, is there any workaround for it?
Thanks
Edit 1: I Tried this one http://forum.xda-developers.com/showthread.php?t=606713 but also not working...
Edit 2: I visit again this site http://www.htc.com/sea/SupportDownload.aspx?p_id=297&cat=2&dl_id=1063 and put my Serial Number and it has the Official Rom for my S/N (yesterday maybe i put the wrong letter or number), downloading now, let see how it works...
Same thing happening on mine too.. Not able to downgrade stock spl 3.14 to any other lower spl. i tried flashing various shipped roms with spl 1.66, 2.07, 2.10 etc.. no luck.. Does anyone know what to do for this problem???
same issue, been trying to get it back for days. i think my problem is the radio, i can'r get it to reflash now.
brizzo said:
same issue, been trying to get it back for days. i think my problem is the radio, i can'r get it to reflash now.
Click to expand...
Click to collapse
hi guys , u need download ur original room ( stock room ) and flash in normal way . after that ur spl is 1.66 or 1.42 depend ur network , after that u ready to upgrade with the rom u want .
Hello to everyone, the problem you mention isn't related to the stock ROM 3.14 but are related to the users who are flashing a non compatible aria ROM.
So my instructions to you are the follow use the stock rom that came from your aria; download the right stock rom from the HTC webpage by using YOUR S/N.
Moved thread to the right section.
yep tried that, flashed RUU_Leo_Vodafone_DE_1.72.162.0_Radio_CRC_Signed_15.32.50.07U_2.07.51.22_2_Ship.exe
i ran it from the sd card and everything said ok but still only loads to tricolour bootloader. i think it has something to do with the radio...won't update from RUU (been using LeoAdvancedRUU 1.03) or sd.
think i'm screwed...
Hi All,
I was facing this same issue for a long time with respect to the 3.03 ROMS.... Yesterday while searching for a solution, I found a website which hosts all types of Shipped ROMS ever published... Just select the ROM belonging to your region from there and Flash it... that will downgrade your SPL to the lower versions... (I personally flashed the 1.48 series ROM for INDIA which is available in that list and now am using WP7 ROM by DFT.... )
Hope this Helps !!!! CHEERS !!!
Please find the URL for India 1.48 series ROM below
P.S. You will find all roms on this website... just do a Ctrl+F for your country on the list of the ROM page.
LINK
brizzo said:
yep tried that, flashed RUU_Leo_Vodafone_DE_1.72.162.0_Radio_CRC_Signed_15.32.50.07U_2.07.51.22_2_Ship.exe
i ran it from the sd card and everything said ok but still only loads to tricolour bootloader. i think it has something to do with the radio...won't update from RUU (been using LeoAdvancedRUU 1.03) or sd.
think i'm screwed...
Click to expand...
Click to collapse
Dont give up man... as long as your HD2 can enter the bootloader its still can be saved...
i am going to try goldcard but i think i have a hardware problem...i'm getting I2C error.
googled it and i'm pretty sure it is going back to the shop. anyway thanks to everyone for your help!