Related
Hi,
I thought I did enough reading to hard-spl my g4 cingular 8125 but i guess not...
Anyways, I did the hard-spl and everything seemed to go smoothly. Then I went ahead and tried to flash the Touch no Evil ROM (http://forum.xda-developers.com/showthread.php?t=327215).
About 4% into the flash I got error 262: update error. Now the device is stuck on bootloader with IPL 2.21.0001 and SPL 2.21.01ip. Plugging in the usb shows "USB" at the bottom left corner of the wizard's screen but I cant detect the device in windows. Since I cant detect the device, I cant remove hard-spl and attempt to reflash using soft-spl the stock 8125 spl and rom.
Anyone have any suggestions on how to remedy the situation? Or did I just brick this thing
Any help or even linking to the right threads would be appreciated. A couple hours of searching didnt yield anything but maybe im looking for the wrong things...
Thanks,
Anushian
EDIT: More searching yielded this: http://forum.xda-developers.com/showthread.php?t=276963&highlight=stuck+bootloader
Basically use MTTY_updateROM.exe to dump the ROM onto an SD Card and restore from that? I dont have a card on me so Id rather get some input before going to buy one just to try this... Mainly, I need to know if the hard-spl still renders the unit CID unlocked and capable of preforming this method.
hello
i had the same problem and it seems its the Ruu i guess you used the ruu thats in touch no evil rom but your device is ok use the wizard love rom http://forum.xda-developers.com/showthread.php?t=298613 and then flash again with the tool that said in g4.7 and it works dont flash to original rom because it contains isp spl and can brick your phone i hope it helps.
Solidus_k said:
hello
i had the same problem and it seems its the Ruu i guess you used the ruu thats in touch no evil rom but your device is ok use the wizard love rom http://forum.xda-developers.com/showthread.php?t=298613 and then flash again with the tool that said in g4.7 and it works dont flash to original rom because it contains isp spl and can brick your phone i hope it helps.
Click to expand...
Click to collapse
Hi and thanks for the tip. I tried wiz love rom flash again and this time it worked (didnt recognize usb first time?). Anyways it went up to 6% and died since the battery died. Im going to just get a standalone charger and charge it and try again. Will probably take 2 weeks to get here though...
My main question is, based on the info provided, is the phone bricked or is it still repairable with a reflash? I didnt find much info related to hard-spl and restoring with the SD methods besides just that the phone must be CID unlocked...
Thanks!
if you have hard spl then you have cid unlock so your phone is ok if you flash wizard love rom use the ruu thats is in wizard love folder dont flash any official rom, try to change from computer or stop running other programs while flashing and your device is not bricked unless you intall official rom.
Solidus_k said:
if you have hard spl then you have cid unlock so your phone is ok if you flash wizard love rom use the ruu thats is in wizard love folder dont flash any official rom, try to change from computer or stop running other programs while flashing and your device is not bricked unless you intall official rom.
Click to expand...
Click to collapse
Hi Solidus_k,
Thanks so much for the info, much appreciated. I'll give it a go again as soon as my charger arrives in the mail since my batteries dead. Just wish you didnt have to boot into winmo to charge...
Anushian
Dear all,
I am facing a problem here.
Had a hardware problem with the built in microphone and had to revert back to stock rom/splash screen/Original SPL in that order.
Had no problems reverting the ROM and the original screen back (just a couple of flashes), BUT when I tried to revert back the stock SPL here http://forum.xda-developers.com/attachment.php?attachmentid=110582&d=1220406410
I renamed the file to RAPHIMG.nbh, copied it to the root of the SD Card and entered bootloader mode and this is what it displays:
RAPH100
SPL-1.90.0000 (Which means a successful flash)
!!! AND THEN THIS !!!
"Upgrade ROM code error"
"Please try again"
This message is located in the last part of the green stripe in the tri color screen (bootloader)
It is then followed by the grey screen automatically which you are supposed to press volume key to start a flash process BUT it just HANGS at Loading...
unabling you to flash anything.
It's actually a friend's phone too so I guess you understand how hard it is....
Any help is appreciated
Thanks in advance
Possible image might be corrupt on sd card, grey screen is shown when it's trying to read sd, have you tried with sd removed? if you get to 2nd tricolor screen with sd removed i would use usb flash to restore it to working order..
Da_G said:
Possible image might be corrupt on sd card, grey screen is shown when it's trying to read sd, have you tried with sd removed? if you get to 2nd tricolor screen with sd removed i would use usb flash to restore it to working order..
Click to expand...
Click to collapse
Removed the SD and it stays at the tricolor screen with the spl version as mentioned in 1st post.
Also, displaying the Upgrade ROM code error, please try again message
The mode is currently serial
What can I do from here?
fireblade63 said:
Dear all,
I am facing a problem here.
Had a hardware problem with the built in microphone and had to revert back to stock rom/splash screen/Original SPL in that order.
Had no problems reverting the ROM and the original screen back (just a couple of flashes), BUT when I tried to revert back the stock SPL here http://forum.xda-developers.com/attachment.php?attachmentid=110582&d=1220406410
I renamed the file to RAPHIMG.nbh, copied it to the root of the SD Card and entered bootloader mode and this is what it displays:
RAPH100
SPL-1.90.0000 (Which means a successful flash)
!!! AND THEN THIS !!!
"Upgrade ROM code error"
"Please try again"
This message is located in the last part of the green stripe in the tri color screen (bootloader)
It is then followed by the grey screen automatically which you are supposed to press volume key to start a flash process BUT it just HANGS at Loading...
unabling you to flash anything.
It's actually a friend's phone too so I guess you understand how hard it is....
Any help is appreciated
Thanks in advance
Click to expand...
Click to collapse
You cannot flash an SPL from the bootloader. You need to use SSPL. The directions can be found in the HardSPL thread.
NotATreoFan said:
You cannot flash an SPL from the bootloader. You need to use SSPL. The directions can be found in the HardSPL thread.
Click to expand...
Click to collapse
Hey man, thx for stopping by..
If I understand correctly, SSPL runs through the device which is stuck at bootloader currently... or am I hopefully wrong??
If you're at the tricolor screen and it reads serial, that should be fine.. plug in usb and it should switch to usb.. then flash a stock carrier rom through usb.. that should get you up and running and you can then run sspl and flash your spl
Da_G said:
If you're at the tricolor screen and it reads serial, that should be fine.. plug in usb and it should switch to usb.. then flash a stock carrier rom through usb.. that should get you up and running and you can then run sspl and flash your spl
Click to expand...
Click to collapse
Keep in mind im currently on stock SPL, do u think flashing the stock ROM is ok?
That's exactly why i suggested stock ROM, stock SPL will only accept stock ROM's (it will overwrite the spl too so make sure the stock rom you are using is the right one)
dude....i hate to say this...butyou might be s.o.l. at this point. i did the same to my fuze not too long ago... tryingto flash anything to the phone just locks it up.i was lucky enough to bs my way through an att guy to get me a new one (was still under the 30 day warranty).
Da_G said:
That's exactly why i suggested stock ROM, stock SPL will only accept stock ROM's (it will overwrite the spl too so make sure the stock rom you are using is the right one)
Click to expand...
Click to collapse
That's wt Im trying now, tried to flash 2 ROMs already and stops at 2% saying Invalid Vendor ID
I gess I'm using wrong shipped roms till now
fireblade63 said:
That's wt Im trying now, tried to flash 2 ROMs already and stops at 2% saying Invalid Vendor ID
I gess I'm using wrong shipped roms till now
Click to expand...
Click to collapse
I had the same problem as you and could not flash any rom, Always get Invalid vendor ID.
You need the right Stock Rom to flash and in my case in the middleeast, the Stock Rom is so far only available in at HTC.
I had to take the phone to HTC Service Center and they flashed the correct Stock Rom and charged me as they did it out of warranty.
Regards
fireblade63 said:
That's wt Im trying now, tried to flash 2 ROMs already and stops at 2% saying Invalid Vendor ID
I gess I'm using wrong shipped roms till now
Click to expand...
Click to collapse
Sorry about my last post... I misread your issue.
If you flashed the stock 1.90 SPL from the HardSPL thread, then you will need to ask Olipro (or cmonex) which WWE ROM it originated from. That ROM is the ONLY one your phone will accept.
The steps in reverting SPL for warranty / return state to always do the ROM first so that you do not run into this problem. I had the same issue when I was testing a US 3G Diamond I bought from Best Buy (to become acclimated to TF3D prior to the Fuze's release). I restored the SPL first, and then couldn't get Dutty's ROM off the phone, because I could not locate a downloadable version of the WWE ROM that phone came with. [Luckily, Best Buy Mobile's employees in KOP, PA aren't too clever, and I was able to convince them that the phone came that way. ]
NotATreoFan said:
Sorry about my last post... I misread your issue.
If you flashed the stock 1.90 SPL from the HardSPL thread, then you will need to ask Olipro (or cmonex) which WWE ROM it originated from. That ROM is the ONLY one your phone will accept.
The steps in reverting SPL for warranty / return state to always do the ROM first so that you do not run into this problem. I had the same issue when I was testing a US 3G Diamond I bought from Best Buy (to become acclimated to TF3D prior to the Fuze's release). I restored the SPL first, and then couldn't get Dutty's ROM off the phone, because I could not locate a downloadable version of the WWE ROM that phone came with. [Luckily, Best Buy Mobile's employees in KOP, PA aren't too clever, and I was able to convince them that the phone came that way. ]
Click to expand...
Click to collapse
Hmm, then I need to know from which ROM the SPL originated and then flash it.
Thing is, some of the shipped roms available at wiki are just nbh files..
I tried flashing with the wrapper exe and the RaphaelCustomRUU.exe and still all roms I've downloaded don't seem to work.
It's a RAPH100 untied to a network.
fireblade63 said:
Hmm, then I need to know from which ROM the SPL originated and then flash it.
Thing is, some of the shipped roms available at wiki are just nbh files..
I tried flashing with the wrapper exe and the RaphaelCustomRUU.exe and still all roms I've downloaded don't seem to work.
It's a RAPH100 untied to a network.
Click to expand...
Click to collapse
Post in the HardSPL thread asking which ROM the SPL originated from. Once you know that, you can download the appropriate ROM from the Wiki.
NotATreoFan said:
Sorry about my last post... I misread your issue.
If you flashed the stock 1.90 SPL from the HardSPL thread, then you will need to ask Olipro (or cmonex) which WWE ROM it originated from. That ROM is the ONLY one your phone will accept.
The steps in reverting SPL for warranty / return state to always do the ROM first so that you do not run into this problem. I had the same issue when I was testing a US 3G Diamond I bought from Best Buy (to become acclimated to TF3D prior to the Fuze's release). I restored the SPL first, and then couldn't get Dutty's ROM off the phone, because I could not locate a downloadable version of the WWE ROM that phone came with. [Luckily, Best Buy Mobile's employees in KOP, PA aren't too clever, and I was able to convince them that the phone came that way. ]
Click to expand...
Click to collapse
SPL has nothing to do with the Invalid Vendor ID Error, It is the CID. In another word you can flash SPL 1.95 and still can not flash the AT Rom 1.95.502.5 because the CID is different.
Regards
ViperBJK's QMAT features GoldCard generator for current HTC devices that can force RUU to bypass CID check.
Do you know what is the CID of your device?
shafez said:
SPL has nothing to do with the Invalid Vendor ID Error, It is the CID. In another word you can flash SPL 1.95 and still can not flash the AT Rom 1.95.502.5 because the CID is different.
Regards
Click to expand...
Click to collapse
The CID is determind by the SPL.
Look up the error code posted... everything points to HardSPL. Back in my Wizard days, HardSPL did not exist, and we just did a CID unlocking. This is not the case with newer devices.
All ROMs are not created equal. Each WWE ROM checks for specific information within the SPL, and if it doesn't find what it's expecting, fail...
stepw said:
ViperBJK's QMAT features GoldCard generator for current HTC devices that can force RUU to bypass CID check.
Do you know what is the CID of your device?
Click to expand...
Click to collapse
I'm not sure
Where can I know that?
@NotATreoFan && Shafez,
I remember from TyTNII day when Shafez suggested extracting 3.29 and 28 SPLs from the newer shipped 6.1's for a better responsive device.
We could extract and build with htc rom tool if I remember the name of the tool correctly.
Do we have a tool as such compatible with TP? (agreeing with NotATreoFan here)
@Shafez,
Since you think it is not SPL and it is a CID issue, what can I do about it?
Sending it to SVC for repair out of warranty is an option but I'd like to leave it as my last.
Did they provide the ROM or they flashed it for you?
Were u able to make raw files out of it for future use or any1 else has it?
Thx guys and keep the help coming
fireblade63 said:
@NotATreoFan && Shafez,
I remember from TyTNII day when Shafez suggested extracting 3.29 and 28 SPLs from the newer shipped 6.1's for a better responsive device.
We could extract and build with htc rom tool if I remember the name of the tool correctly.
Do we have a tool as such compatible with TP? (agreeing with NotATreoFan here)
@Shafez,
Since you think it is not SPL and it is a CID issue, what can I do about it?
Sending it to SVC for repair out of warranty is an option but I'd like to leave it as my last.
Did they provide the ROM or they flashed it for you?
Were u able to make raw files out of it for future use or any1 else has it?
Thx guys and keep the help coming
Click to expand...
Click to collapse
Since you cannot get past the bootloader, your only option is to find the WWE ROM that matches the SPL you flashed. Even though the HTC ROM Tool "signs" the NBH file, it still won't fool the stock bootloader... if it did, we wouldn't need HardSPL.
Hello.
Okay so I had HSPL 1.42 on my phone.
I extracted the 'RUU_signed.nbh' of the official 3.14 stock ROM from the .exe file that HTC provided.
I changed it's name to 'LEOIMG.nbh' and placed it on the root of my SD card.
I then tried flashing the new ROM by entering the bootloader.
For some reason (power was NOT lost) the ROM upgrade failed half way through.
Now when I try and boot the phone normally, it displays a grey screen with an alert symbol saying 'Software update failed. Please try again'
It then takes me to the bootloader screen
The SPL version has changed from HSPL 1.42 to SPL-3.03.0000
Below these details it displays the message 'Upgrade ROM code error. Please try again'
Due to the SPL version being 3.03, I am unable to install any HSPL version onto it again.
When I try to flash the official ROM 3.14 again via the official RUU (via laptop) it fails
What do I do? IS MY PHONE BRICKED?!
i think your hd2 is not bricked just without os and i think you are going to wait for the new hspl
Okay
Thanks for your reply
I seem to remember somewhere that I might be able to solve it somehow by using a friend's HD2...hmmm...not sure though
EDIT: I managed to finally download the 1.48 stock ROM. When I try to change to this ROM via the RUU it reaches 1% and then fails.
MTN_HD2 said:
i already know what will happen . the 3.14 rom cant work correctly (in another word works like ****) with SPLs other than 3.03. so if i install it since theres an HSPL on it the SPL version wont change to 3.03 . to change its spl , you should install the rom once more from the sd card which will freeze in the middle of the update and the result is a f'd ROM and SPL 3.03 .
since theres no HSPL support on 3.03 , theres no comeback and you will be f'd until a new HSPL is released
btw what SPL version does the 1.66 official update install?
Click to expand...
Click to collapse
I found this on another thread, I think this is basically my problem. Joy.
I had the same problem. You have to install the original shipped rom, for example of you have a vodafone branded device, you have to install the original vodafone-rom via RUU.
gamer-Kenny said:
I had the same problem. You have to install the original shipped rom, for example of you have a vodafone branded device, you have to install the original vodafone-rom via RUU.
Click to expand...
Click to collapse
My device is unbranded, but when I put the serial number in to HTC's update download page thing it says it is unsuitable, so I used someone elses unbranded S/N and used that instead, maybe that's why it happened? Is there a solution?
For reference - This is what is displayed when I try to flash back to an old stock ROM via SD Card (Volume Down and Power putton)
http://img2.imageshack.us/img2/3360/dsc01951x.jpg
c'mon pleaseeee
try to flash you stock rom via sd card. that MUST work!
DN41
DN41 said:
try to flash you stock rom via sd card. that MUST work!
DN41
Click to expand...
Click to collapse
You mean by extracting the .nbh file from a stock ROM? I tried that and I seem to remember that it failed
mh..i'm nearly 100% sure, that it has to work...
was it really YOUR stock rom? sure that your phone wasnt branded?
DN41
Well I got my phone second hand from CeX (English shop)
It had the unbranded stock ROM on it, and no physical branding on the phone like the T-Mobile name. But when I put in my S/N to the unbranded update thingy it said the download wasn't suitable for my device so I used someone elses S/N
so it seems that they flashed the stock rom, but your phone is originally branded.
if i was you, i would call them and ask or i would use my own S/N and check all downloads on htc.com. then you'll see of an o2, tmo, vdf or whatever is downloadable.
the one, which is downloadable with your s/n, should be flashed via sd.
DN41
DN41 said:
so it seems that they flashed the stock rom, but your phone is originally branded.
if i was you, i would call them and ask or i would use my own S/N and check all downloads on htc.com. then you'll see of an o2, tmo, vdf or whatever is downloadable.
the one, which is downloadable with your s/n, should be flashed via sd.
DN41
Click to expand...
Click to collapse
Ok, cheers, I'll try that and report back
i'm with you
DN41
DN41 said:
i'm with you
DN41
Click to expand...
Click to collapse
Okay, it's a Vodafone device, so what do I need to do? Extract the vodafone .nbh file from the ROM and then flash it via SD?
you're right!
DN41
DN41 said:
you're right!
DN41
Click to expand...
Click to collapse
Okay, I'll try that and report back
*hopes it works*
Thanks for your help dude
it's a pleasure (=
i hope it works
DN41
DN41 said:
it's a pleasure (=
i hope it works
DN41
Click to expand...
Click to collapse
OMG, I love you dude, complete legend. Updating now, so far:
RADIO_V2 - OK
RCUST - OK
BOOTLOADER - OK
SPLASH1 - OK
OS -
CONFIGDATA -
That's further than I got before
I think it's working
[SOLVED] Just Flashed the correct official ship rom from HTC site using my HD2 Serial Number... It works like a charm. SPL has downgraded to 1.46
Thanks everyone who helping...
Just Flashing Stock Rom RUU_Leo_S_HTC_WWE_3.14.405.2_Radio_15.42.50.11U_2. 15.50.14_LEO_S_Ship.exe, I got stuck in bootloder.
- Error 294 Invalid Vender ID
- SPL 3.03.0000 can't HSPL-ed with HSPL3, SPL 3.03 is't listed as supported SPL
Flashed RUU_Leo_HTC_WWE_1.66.405.2_Radio_Signed_15.30.50.07U_2.06.51.07_Ship.exe, still stuck on bootloader.
- Error 294 Invalid Vender ID
- SPL 3.03.0000
- on boot loader screen said: Update fail code error, please try again
Try to get stock rom from HTC official site, but no rom suitable for S/N I entered.
Need help, is there any workaround for it?
Thanks
Edit 1: I Tried this one http://forum.xda-developers.com/showthread.php?t=606713 but also not working...
Edit 2: I visit again this site http://www.htc.com/sea/SupportDownload.aspx?p_id=297&cat=2&dl_id=1063 and put my Serial Number and it has the Official Rom for my S/N (yesterday maybe i put the wrong letter or number), downloading now, let see how it works...
Same thing happening on mine too.. Not able to downgrade stock spl 3.14 to any other lower spl. i tried flashing various shipped roms with spl 1.66, 2.07, 2.10 etc.. no luck.. Does anyone know what to do for this problem???
same issue, been trying to get it back for days. i think my problem is the radio, i can'r get it to reflash now.
brizzo said:
same issue, been trying to get it back for days. i think my problem is the radio, i can'r get it to reflash now.
Click to expand...
Click to collapse
hi guys , u need download ur original room ( stock room ) and flash in normal way . after that ur spl is 1.66 or 1.42 depend ur network , after that u ready to upgrade with the rom u want .
Hello to everyone, the problem you mention isn't related to the stock ROM 3.14 but are related to the users who are flashing a non compatible aria ROM.
So my instructions to you are the follow use the stock rom that came from your aria; download the right stock rom from the HTC webpage by using YOUR S/N.
Moved thread to the right section.
yep tried that, flashed RUU_Leo_Vodafone_DE_1.72.162.0_Radio_CRC_Signed_15.32.50.07U_2.07.51.22_2_Ship.exe
i ran it from the sd card and everything said ok but still only loads to tricolour bootloader. i think it has something to do with the radio...won't update from RUU (been using LeoAdvancedRUU 1.03) or sd.
think i'm screwed...
Hi All,
I was facing this same issue for a long time with respect to the 3.03 ROMS.... Yesterday while searching for a solution, I found a website which hosts all types of Shipped ROMS ever published... Just select the ROM belonging to your region from there and Flash it... that will downgrade your SPL to the lower versions... (I personally flashed the 1.48 series ROM for INDIA which is available in that list and now am using WP7 ROM by DFT.... )
Hope this Helps !!!! CHEERS !!!
Please find the URL for India 1.48 series ROM below
P.S. You will find all roms on this website... just do a Ctrl+F for your country on the list of the ROM page.
LINK
brizzo said:
yep tried that, flashed RUU_Leo_Vodafone_DE_1.72.162.0_Radio_CRC_Signed_15.32.50.07U_2.07.51.22_2_Ship.exe
i ran it from the sd card and everything said ok but still only loads to tricolour bootloader. i think it has something to do with the radio...won't update from RUU (been using LeoAdvancedRUU 1.03) or sd.
think i'm screwed...
Click to expand...
Click to collapse
Dont give up man... as long as your HD2 can enter the bootloader its still can be saved...
i am going to try goldcard but i think i have a hardware problem...i'm getting I2C error.
googled it and i'm pretty sure it is going back to the shop. anyway thanks to everyone for your help!
I was trying to flash the stock rom from the sd card in order to get rid of the hspl but I flashed it with the wrong rom and now my phone will not get past the 4 color screen. I tried to flash with the stock tmobile rom but I keep getting error. When I try to flash with the sd with the tmobile RUU it will say "loading..." and does nothing. I tried to run the exe file with windows and I will get errors everytime. Did I brick my phone?
I have a Tmobile US HD2 phone and without knowing better, I flashed it the first time with:
RUU_Leo_S_HTC_WWE_3.14.405.2_Radio_15.42.50.11U_2.15.50.14_LEO_S_Ship.exe
What can I do now?
can you get into bootloader?
if so, what does it say?
jsmccabe78 said:
can you get into bootloader?
if so, what does it say?
Click to expand...
Click to collapse
Is the bootloader the red/green/blue/white screen? If so, yes I see that screen and it saids "Upgrade ROM code error Please try again"
I have tried to flash again and again from the SD card and when I flash with the official Tmous ROM, it will get stuck at the installing screen and does nothing. If I try to restore with windows using the exe file, it will look like its doing something but will error out after a few minutes staying at 0%.
Also right now it shows
PB91120 SS-B3
SPL-3.03.000 XE
MicroP(LED) 0x05
MicroP(Touch) 0x50
Do you mean that you have a T-Mous Usa device, the one with red and green buttoned? and 1GB of memory?
kurt-willems said:
Do you mean that you have a T-Mous Usa device, the one with red and green buttoned? and 1GB of memory?
Click to expand...
Click to collapse
Yes, and I tried flashing with the WWE version without knowing better
Is my phone bricked? And is it out of warrantee now?
vwrado said:
Yes, and I tried flashing with the WWE version without knowing better
Is my phone bricked? And is it out of warrantee now?
Click to expand...
Click to collapse
Good question, I have sean lot of users installing a wrong ROM, but on the correct device.
the HD2 T-Mous device isn't the same as the european device.
But I'm not sure at 100% you can save it.(lucky the new 3.14 european stock rom have the same radio if not it was total stuck.)
but now how to restore
I mean you have already try to flash (the correct on) over SD and it didn't works.
can you tell witch error you get when you was trying to flash the correct stock ROM over SD or by your PC?
vwrado said:
Is the bootloader the red/green/blue/white screen? If so, yes I see that screen and it saids "Upgrade ROM code error Please try again"
I have tried to flash again and again from the SD card and when I flash with the official Tmous ROM, it will get stuck at the installing screen and does nothing. If I try to restore with windows using the exe file, it will look like its doing something but will error out after a few minutes staying at 0%.
Also right now it shows
PB91120 SS-B3
SPL-3.03.000 XE
MicroP(LED) 0x05
MicroP(Touch) 0x50
Click to expand...
Click to collapse
I may be wrong, however, if you're still having a problem you may need to reinstall MAGLDR again after a failed sd card flash.
kurt-willems said:
Good question, I have sean lot of users installing a wrong ROM, but on the correct device.
the HD2 T-Mous device isn't the same as the european device.
But I'm not sure at 100% you can save it.(lucky the new 3.14 european stock rom have the same radio if not it was total stuck.)
but now how to restore
I mean you have already try to flash (the correct on) over SD and it didn't works.
can you tell witch error you get when you was trying to flash the correct stock ROM over SD or by your PC?
Click to expand...
Click to collapse
When trying to flash the correct ROM over SD it will just have the plain white screen with "installing..." on the top and it does nothing. I left it alone for an hour and nothing happens.
When trying to flash with the exe on my computer, I will go through all the process and click next, next next, then it tries to update the rom (on the phone it shows the black HTC screen with the status bar) and it stays at that screen at 0% and after a few minutes it will show update failed on the pc while the phone still shows the status bar at 0%. The PC shows Error 262: update error, The rom update utility encountered communication errors during the update process.
ElaineD said:
I may be wrong, however, if you're still having a problem you may need to reinstall MAGLDR again after a failed sd card flash.
Click to expand...
Click to collapse
Just tried MAGLDR and it shows the same problem as if I was trying to flash the correct ROM.
vwrado said:
When trying to flash the correct ROM over SD it will just have the plain white screen with "installing..." on the top and it does nothing. I left it alone for an hour and nothing happens.
When trying to flash with the exe on my computer, I will go through all the process and click next, next next, then it tries to update the rom (on the phone it shows the black HTC screen with the status bar) and it stays at that screen at 0% and after a few minutes it will show update failed on the pc while the phone still shows the status bar at 0%. The PC shows Error 262: update error, The rom update utility encountered communication errors during the update process.
Just tried MAGLDR and it shows the same problem as if I was trying to flash the correct ROM.
Click to expand...
Click to collapse
Have you tried a Gold Card method?
silverwind said:
Have you tried a Gold Card method?
Click to expand...
Click to collapse
What is the gold card method?
Would it be safe to just send my device as it is now? All that it saids when I boot it up is SPL 3.03 in the bootloader screen. Would that make it out of warrantee if I flashed the wrong rom?
i think so as the hspl is off your phone. out of ideas otherwise, ya know? what can it hurt (assuming kurt, etc. don't have ideas)?
question will be if they can see the rom, etc. but even then it still is official, just not right.
jsmccabe78 said:
i think so as the hspl is off your phone. out of ideas otherwise, ya know? what can it hurt (assuming kurt, etc. don't have ideas)?
question will be if they can see the rom, etc. but even then it still is official, just not right.
Click to expand...
Click to collapse
I called and asked about it today and they said it is out of warranty if I flashed it with the wrong official rom
vwrado said:
I called and asked about it today and they said it is out of warranty if I flashed it with the wrong official rom
Click to expand...
Click to collapse
Don't lose hope and be patient. There are a LOT of people much smarter than me here. It's just that they're preoccupied right now doing a much need reorganization of the XDA site. Keep reading and give the smart guys a chance to help you by continuing to post any additional info you can gleen from your phone problem.
Hmm, it isn't looking good.
If you only have flashed a wrong radio, well it wasn't so obvious for HTC to see what have caused the problem so there was 50% chance that the warranty worked. (but you may never say them that you have flashed, if not thy will suspect a wrong manipulation of the user.)
But beside that you have flashed the stock ROM form a other device. the problem is the SPL => 3.03 this isn't for your device.
SPL are like Secondary Program Loader. Think of this in the same sense as bios on a pc. (it sets where your system boots from, intialises sub system process etc)
so this is a bigger problem.
And when you will send your device to HTC repair center thy will see directly the wrong spl; so no warranty.
I'm sorry to say, but personally I don't see a solution.
vwrado said:
I was trying to flash the stock rom from the sd card in order to get rid of the hspl but I flashed it with the wrong rom and now my phone will not get past the 4 color screen. I tried to flash with the stock tmobile rom but I keep getting error. When I try to flash with the sd with the tmobile RUU it will say "loading..." and does nothing. I tried to run the exe file with windows and I will get errors everytime. Did I brick my phone?
I have a Tmobile US HD2 phone and without knowing better, I flashed it the first time with:
RUU_Leo_S_HTC_WWE_3.14.405.2_Radio_15.42.50.11U_2.15.50.14_LEO_S_Ship.exe
What can I do now?
Click to expand...
Click to collapse
Look up post #13 on this thread, similar problem:
http://forum.xda-developers.com/showthread.php?t=903641
stevedebi said:
Look up post #13 on this thread, similar problem:
http://forum.xda-developers.com/showthread.php?t=903641
Click to expand...
Click to collapse
Very optimistic, but he have install the latest EU/Asian stock ROM on his T-Mous device.
Installing these latest stock ROM install the spl 3.03 (who isn't the same/compatible) this brakes his device.
kurt-willems said:
Very optimistic, but he have install the latest EU/Asian stock ROM on his T-Mous device.
Installing these latest stock ROM install the spl 3.03 (who isn't the same/compatible) this brakes his device.
Click to expand...
Click to collapse
I'm assuming that he would know to install a TMOUS stock ROM, not a foreign version. My point was that it was possible to recover by installing a stock ROM.
stevedebi said:
I'm assuming that he would know to install a TMOUS stock ROM, not a foreign version. My point was that it was possible to recover by installing a stock ROM.
Click to expand...
Click to collapse
I know what you mean. but when he have installed the foreign stock ROM version, it have install a incompatible/wrong spl version, this brakes the device.
kurt-willems said:
I know what you mean. but when he have installed the foreign stock ROM version, it have install a incompatible/wrong spl version, this brakes the device.
Click to expand...
Click to collapse
Well, the other thread had the OP listing the exact same message, and she had also accidentally installed the wrong SPL. I just thought it deserved a look.