I was trying to flash the stock rom from the sd card in order to get rid of the hspl but I flashed it with the wrong rom and now my phone will not get past the 4 color screen. I tried to flash with the stock tmobile rom but I keep getting error. When I try to flash with the sd with the tmobile RUU it will say "loading..." and does nothing. I tried to run the exe file with windows and I will get errors everytime. Did I brick my phone?
I have a Tmobile US HD2 phone and without knowing better, I flashed it the first time with:
RUU_Leo_S_HTC_WWE_3.14.405.2_Radio_15.42.50.11U_2.15.50.14_LEO_S_Ship.exe
What can I do now?
can you get into bootloader?
if so, what does it say?
jsmccabe78 said:
can you get into bootloader?
if so, what does it say?
Click to expand...
Click to collapse
Is the bootloader the red/green/blue/white screen? If so, yes I see that screen and it saids "Upgrade ROM code error Please try again"
I have tried to flash again and again from the SD card and when I flash with the official Tmous ROM, it will get stuck at the installing screen and does nothing. If I try to restore with windows using the exe file, it will look like its doing something but will error out after a few minutes staying at 0%.
Also right now it shows
PB91120 SS-B3
SPL-3.03.000 XE
MicroP(LED) 0x05
MicroP(Touch) 0x50
Do you mean that you have a T-Mous Usa device, the one with red and green buttoned? and 1GB of memory?
kurt-willems said:
Do you mean that you have a T-Mous Usa device, the one with red and green buttoned? and 1GB of memory?
Click to expand...
Click to collapse
Yes, and I tried flashing with the WWE version without knowing better
Is my phone bricked? And is it out of warrantee now?
vwrado said:
Yes, and I tried flashing with the WWE version without knowing better
Is my phone bricked? And is it out of warrantee now?
Click to expand...
Click to collapse
Good question, I have sean lot of users installing a wrong ROM, but on the correct device.
the HD2 T-Mous device isn't the same as the european device.
But I'm not sure at 100% you can save it.(lucky the new 3.14 european stock rom have the same radio if not it was total stuck.)
but now how to restore
I mean you have already try to flash (the correct on) over SD and it didn't works.
can you tell witch error you get when you was trying to flash the correct stock ROM over SD or by your PC?
vwrado said:
Is the bootloader the red/green/blue/white screen? If so, yes I see that screen and it saids "Upgrade ROM code error Please try again"
I have tried to flash again and again from the SD card and when I flash with the official Tmous ROM, it will get stuck at the installing screen and does nothing. If I try to restore with windows using the exe file, it will look like its doing something but will error out after a few minutes staying at 0%.
Also right now it shows
PB91120 SS-B3
SPL-3.03.000 XE
MicroP(LED) 0x05
MicroP(Touch) 0x50
Click to expand...
Click to collapse
I may be wrong, however, if you're still having a problem you may need to reinstall MAGLDR again after a failed sd card flash.
kurt-willems said:
Good question, I have sean lot of users installing a wrong ROM, but on the correct device.
the HD2 T-Mous device isn't the same as the european device.
But I'm not sure at 100% you can save it.(lucky the new 3.14 european stock rom have the same radio if not it was total stuck.)
but now how to restore
I mean you have already try to flash (the correct on) over SD and it didn't works.
can you tell witch error you get when you was trying to flash the correct stock ROM over SD or by your PC?
Click to expand...
Click to collapse
When trying to flash the correct ROM over SD it will just have the plain white screen with "installing..." on the top and it does nothing. I left it alone for an hour and nothing happens.
When trying to flash with the exe on my computer, I will go through all the process and click next, next next, then it tries to update the rom (on the phone it shows the black HTC screen with the status bar) and it stays at that screen at 0% and after a few minutes it will show update failed on the pc while the phone still shows the status bar at 0%. The PC shows Error 262: update error, The rom update utility encountered communication errors during the update process.
ElaineD said:
I may be wrong, however, if you're still having a problem you may need to reinstall MAGLDR again after a failed sd card flash.
Click to expand...
Click to collapse
Just tried MAGLDR and it shows the same problem as if I was trying to flash the correct ROM.
vwrado said:
When trying to flash the correct ROM over SD it will just have the plain white screen with "installing..." on the top and it does nothing. I left it alone for an hour and nothing happens.
When trying to flash with the exe on my computer, I will go through all the process and click next, next next, then it tries to update the rom (on the phone it shows the black HTC screen with the status bar) and it stays at that screen at 0% and after a few minutes it will show update failed on the pc while the phone still shows the status bar at 0%. The PC shows Error 262: update error, The rom update utility encountered communication errors during the update process.
Just tried MAGLDR and it shows the same problem as if I was trying to flash the correct ROM.
Click to expand...
Click to collapse
Have you tried a Gold Card method?
silverwind said:
Have you tried a Gold Card method?
Click to expand...
Click to collapse
What is the gold card method?
Would it be safe to just send my device as it is now? All that it saids when I boot it up is SPL 3.03 in the bootloader screen. Would that make it out of warrantee if I flashed the wrong rom?
i think so as the hspl is off your phone. out of ideas otherwise, ya know? what can it hurt (assuming kurt, etc. don't have ideas)?
question will be if they can see the rom, etc. but even then it still is official, just not right.
jsmccabe78 said:
i think so as the hspl is off your phone. out of ideas otherwise, ya know? what can it hurt (assuming kurt, etc. don't have ideas)?
question will be if they can see the rom, etc. but even then it still is official, just not right.
Click to expand...
Click to collapse
I called and asked about it today and they said it is out of warranty if I flashed it with the wrong official rom
vwrado said:
I called and asked about it today and they said it is out of warranty if I flashed it with the wrong official rom
Click to expand...
Click to collapse
Don't lose hope and be patient. There are a LOT of people much smarter than me here. It's just that they're preoccupied right now doing a much need reorganization of the XDA site. Keep reading and give the smart guys a chance to help you by continuing to post any additional info you can gleen from your phone problem.
Hmm, it isn't looking good.
If you only have flashed a wrong radio, well it wasn't so obvious for HTC to see what have caused the problem so there was 50% chance that the warranty worked. (but you may never say them that you have flashed, if not thy will suspect a wrong manipulation of the user.)
But beside that you have flashed the stock ROM form a other device. the problem is the SPL => 3.03 this isn't for your device.
SPL are like Secondary Program Loader. Think of this in the same sense as bios on a pc. (it sets where your system boots from, intialises sub system process etc)
so this is a bigger problem.
And when you will send your device to HTC repair center thy will see directly the wrong spl; so no warranty.
I'm sorry to say, but personally I don't see a solution.
vwrado said:
I was trying to flash the stock rom from the sd card in order to get rid of the hspl but I flashed it with the wrong rom and now my phone will not get past the 4 color screen. I tried to flash with the stock tmobile rom but I keep getting error. When I try to flash with the sd with the tmobile RUU it will say "loading..." and does nothing. I tried to run the exe file with windows and I will get errors everytime. Did I brick my phone?
I have a Tmobile US HD2 phone and without knowing better, I flashed it the first time with:
RUU_Leo_S_HTC_WWE_3.14.405.2_Radio_15.42.50.11U_2.15.50.14_LEO_S_Ship.exe
What can I do now?
Click to expand...
Click to collapse
Look up post #13 on this thread, similar problem:
http://forum.xda-developers.com/showthread.php?t=903641
stevedebi said:
Look up post #13 on this thread, similar problem:
http://forum.xda-developers.com/showthread.php?t=903641
Click to expand...
Click to collapse
Very optimistic, but he have install the latest EU/Asian stock ROM on his T-Mous device.
Installing these latest stock ROM install the spl 3.03 (who isn't the same/compatible) this brakes his device.
kurt-willems said:
Very optimistic, but he have install the latest EU/Asian stock ROM on his T-Mous device.
Installing these latest stock ROM install the spl 3.03 (who isn't the same/compatible) this brakes his device.
Click to expand...
Click to collapse
I'm assuming that he would know to install a TMOUS stock ROM, not a foreign version. My point was that it was possible to recover by installing a stock ROM.
stevedebi said:
I'm assuming that he would know to install a TMOUS stock ROM, not a foreign version. My point was that it was possible to recover by installing a stock ROM.
Click to expand...
Click to collapse
I know what you mean. but when he have installed the foreign stock ROM version, it have install a incompatible/wrong spl version, this brakes the device.
kurt-willems said:
I know what you mean. but when he have installed the foreign stock ROM version, it have install a incompatible/wrong spl version, this brakes the device.
Click to expand...
Click to collapse
Well, the other thread had the OP listing the exact same message, and she had also accidentally installed the wrong SPL. I just thought it deserved a look.
Related
I restored the stock vodafone rom and then flashed the stock spl now when i turn the phone on i get the spl screen and it say
upgrade rom code error
then i get a grey screen that says Loading... nothing more
lohap said:
I restored the stock vodafone rom and then flashed the stock spl now when i turn the phone on i get the spl screen and it say
upgrade rom code error
then i get a grey screen that says Loading... nothing more
Click to expand...
Click to collapse
How did you flash the original SPL?
As far as I know there is no JumpSPL or SoftSPL for Raphael yet? Or am I wrong?
[EDIT] Sorry, I've seen how it's possible in the Wiki.
Per the instructions at
http://forum.xda-developers.com/showthread.php?t=410150
now it seems to boot the stock spl but with that error
windows doesnt even detect it i think
woop got windows to detect it
problem is i cant flash the hardspl, spl and if i try to flash a stock firmware i get vendor id error, anyone got a full dump of the vodaone uk firmware
Could not you flash the ROM from memory card (when you find any)?
crocodile010 said:
Could not you flash the ROM from memory card (when you find any)?
Click to expand...
Click to collapse
problem is i cant flash the hardspl..........so 1 and 1 is 2,he cannot do that
have u tried getting in touch with olipro or cmonex? or with any members of the elite team? my guess is they are the ones with most technical knowledge of the device so ask one of them help.
ofcourse always be nice and polite and patient as those guys have their plates full
thanks ill send them a pm and see if i need to buy a new device.
hi been told i can fix this with mtty and one got a link to a download and do i need to do anything to the raphel to get it into serial mode
At first it was endlessly stuck on the HTC screen, then I flashed this rom using USB
http://www.vbnfiles.com/xda/xmoo/Leo/TMOUS/ 2nd one in the list. Then it was stuck on the T-Mobile Stick together, this is a test version screen. THEN I did Task 29, and now any besides that one gets stuck on 99%. Please help guys thanks!
And I can't flash through MicroSD, i only have one 2GB card and I already tried it, it wont work. And I can still go into bootloader.
What SPL is it showing in bootloader?
Scabes24 said:
What SPL is it showing in bootloader?
Click to expand...
Click to collapse
It was showing HSPL. I tried a 4GB and it worked! It was back to the stick together screen, and stuck there. Then I tried doing it through PC, and now Task 29 gets stuck, PC flash fails at 8%, and flashing through MicroSD says RSA Fail. The SPL is now just SPL.
Ali_Shaikh said:
It was showing HSPL. I tried a 4GB and it worked! It was back to the stick together screen, and stuck there. Then I tried doing it through PC, and now Task 29 gets stuck, PC flash fails at 8%, and flashing through MicroSD says RSA Fail. The SPL is now just SPL.
Click to expand...
Click to collapse
Try going into bootloader and running HSPL.exe
And read this and see if it's similar
Scabes24 said:
Try going into bootloader and running HSPL.exe
And read this and see if it's similar
Click to expand...
Click to collapse
Wait I tried again using the MicroSD card and it worked somehow. But still stuck at Stick Together Screen. Should I still do that? I just need to get it running until the replacement from T-Mo comes in.
Ali_Shaikh said:
Wait I tried again using the MicroSD card and it worked somehow. But still stuck at Stick Together Screen. Should I still do that? I just need to get it running until the replacement from T-Mo comes in.
Click to expand...
Click to collapse
Hi
Do the following or you might brick your device by using Microsd flashing.
1. Get in to the booloader
2. Run HSPL2 and select the HSPL version you like
3. when got the Hacked it message
4. Then get into bootloader again
5. Flash any custom rom
6. Again get into bootloader
7. flash one of a radio version 2.(08 or 09 or 10 or 11 or 12).50
it will do the trick. Looks like you have the wrong radio version
Good luck
sabes143 said:
Hi
Do the following or you might brick your device by using Microsd flashing.
1. Get in to the booloader
2. Run HSPL2 and select the HSPL version you like
3. when got the Hacked it message
4. Then get into bootloader again
5. Flash any custom rom
6. Again get into bootloader
7. flash one of a radio version 2.(08 or 09 or 10 or 11 or 12).50
it will do the trick. Looks like you have the wrong radio version
Good luck
Click to expand...
Click to collapse
I did all of it step by step, didn't work
except that the above instructions say hspl2. you say you have a tmous so hspl2 won't work, only hspl3
samsamuel said:
except that the above instructions say hspl2. you say you have a tmous so hspl2 won't work, only hspl3
Click to expand...
Click to collapse
I think he had already hspl'd, but maybe not. there's another thread in the general section.
samsamuel said:
except that the above instructions say hspl2. you say you have a tmous so hspl2 won't work, only hspl3
Click to expand...
Click to collapse
Yeah I switched HSPL2 for HSPL3. But otherwise I followed them word to word.
What is this madness. It works on a random reset, then crashes after a while. Whats going on?
Hello.
Okay so I had HSPL 1.42 on my phone.
I extracted the 'RUU_signed.nbh' of the official 3.14 stock ROM from the .exe file that HTC provided.
I changed it's name to 'LEOIMG.nbh' and placed it on the root of my SD card.
I then tried flashing the new ROM by entering the bootloader.
For some reason (power was NOT lost) the ROM upgrade failed half way through.
Now when I try and boot the phone normally, it displays a grey screen with an alert symbol saying 'Software update failed. Please try again'
It then takes me to the bootloader screen
The SPL version has changed from HSPL 1.42 to SPL-3.03.0000
Below these details it displays the message 'Upgrade ROM code error. Please try again'
Due to the SPL version being 3.03, I am unable to install any HSPL version onto it again.
When I try to flash the official ROM 3.14 again via the official RUU (via laptop) it fails
What do I do? IS MY PHONE BRICKED?!
i think your hd2 is not bricked just without os and i think you are going to wait for the new hspl
Okay
Thanks for your reply
I seem to remember somewhere that I might be able to solve it somehow by using a friend's HD2...hmmm...not sure though
EDIT: I managed to finally download the 1.48 stock ROM. When I try to change to this ROM via the RUU it reaches 1% and then fails.
MTN_HD2 said:
i already know what will happen . the 3.14 rom cant work correctly (in another word works like ****) with SPLs other than 3.03. so if i install it since theres an HSPL on it the SPL version wont change to 3.03 . to change its spl , you should install the rom once more from the sd card which will freeze in the middle of the update and the result is a f'd ROM and SPL 3.03 .
since theres no HSPL support on 3.03 , theres no comeback and you will be f'd until a new HSPL is released
btw what SPL version does the 1.66 official update install?
Click to expand...
Click to collapse
I found this on another thread, I think this is basically my problem. Joy.
I had the same problem. You have to install the original shipped rom, for example of you have a vodafone branded device, you have to install the original vodafone-rom via RUU.
gamer-Kenny said:
I had the same problem. You have to install the original shipped rom, for example of you have a vodafone branded device, you have to install the original vodafone-rom via RUU.
Click to expand...
Click to collapse
My device is unbranded, but when I put the serial number in to HTC's update download page thing it says it is unsuitable, so I used someone elses unbranded S/N and used that instead, maybe that's why it happened? Is there a solution?
For reference - This is what is displayed when I try to flash back to an old stock ROM via SD Card (Volume Down and Power putton)
http://img2.imageshack.us/img2/3360/dsc01951x.jpg
c'mon pleaseeee
try to flash you stock rom via sd card. that MUST work!
DN41
DN41 said:
try to flash you stock rom via sd card. that MUST work!
DN41
Click to expand...
Click to collapse
You mean by extracting the .nbh file from a stock ROM? I tried that and I seem to remember that it failed
mh..i'm nearly 100% sure, that it has to work...
was it really YOUR stock rom? sure that your phone wasnt branded?
DN41
Well I got my phone second hand from CeX (English shop)
It had the unbranded stock ROM on it, and no physical branding on the phone like the T-Mobile name. But when I put in my S/N to the unbranded update thingy it said the download wasn't suitable for my device so I used someone elses S/N
so it seems that they flashed the stock rom, but your phone is originally branded.
if i was you, i would call them and ask or i would use my own S/N and check all downloads on htc.com. then you'll see of an o2, tmo, vdf or whatever is downloadable.
the one, which is downloadable with your s/n, should be flashed via sd.
DN41
DN41 said:
so it seems that they flashed the stock rom, but your phone is originally branded.
if i was you, i would call them and ask or i would use my own S/N and check all downloads on htc.com. then you'll see of an o2, tmo, vdf or whatever is downloadable.
the one, which is downloadable with your s/n, should be flashed via sd.
DN41
Click to expand...
Click to collapse
Ok, cheers, I'll try that and report back
i'm with you
DN41
DN41 said:
i'm with you
DN41
Click to expand...
Click to collapse
Okay, it's a Vodafone device, so what do I need to do? Extract the vodafone .nbh file from the ROM and then flash it via SD?
you're right!
DN41
DN41 said:
you're right!
DN41
Click to expand...
Click to collapse
Okay, I'll try that and report back
*hopes it works*
Thanks for your help dude
it's a pleasure (=
i hope it works
DN41
DN41 said:
it's a pleasure (=
i hope it works
DN41
Click to expand...
Click to collapse
OMG, I love you dude, complete legend. Updating now, so far:
RADIO_V2 - OK
RCUST - OK
BOOTLOADER - OK
SPLASH1 - OK
OS -
CONFIGDATA -
That's further than I got before
I think it's working
Phone's bootloader info:
PB81120 SS-B3
SPL-2.10.0000 8G XE
Also, I think I have the 1024 Leo, bought from T-Mobile with the Green/Red call/hangup buttons.
Can anyone help me with the downgrade?
From the official HSPL thread I read
"It is possible to downgrade to this SPL, by just flashing to an Official ROM
with this SPL version."
Can someone help a noob with this process? I've never flashed b4!
Also, my phone currently won't load and is stuck on the "stick together screen"
cakinlife,
Start here: http://forum.xda-developers.com/showthread.php?t=653614
Out of curiosity, why do you want to downgrade to 1.42 SPL?
After reading some guides, I think I need to downgrade to 1.42 in order to install HSPL don't I?
After that, I want to install android.
EDITTTTT
Hold up, I just continued reading some other stuff and found out I don't need to downgrade.
Problem is my phone gets stuck on the "Stick Together" screen. How do I install HSPL if I can't get phone to load?
Any tips? Thanks
cakinlife said:
After reading some guides, I think I need to downgrade to 1.42 in order to install HSPL don't I?
After that, I want to install android.
EDITTTTT
Hold up, I just continued reading some other stuff and found out I don't need to downgrade.
Click to expand...
Click to collapse
That's correct. With the most recent HSPL4, you can go direct to 2.08.HSPL or 3.03 (2.08 if you wanna go Android)
Problem is my phone gets stuck on the "Stick Together" screen. How do I install HSPL if I can't get phone to load?
Any tips? Thanks
Click to expand...
Click to collapse
Has this phone ever booted up? Have you flashed something previously which caused this condition? Radio?
In any case, I'm assuming you can get into bootloader, so you can just try running HSPL4 on your computer with your HD2 in bootloader mode-- that should allow you to install HSPL, and you can see if this rectifies the loading problem and then go from there. Alternatively, you can try starting totally from scratch by installing an appropriate factory/shipped ROM (with proper radio) from the microSD card (see the flashing thread for instructions). If this brings your phone back to a working baseline, then:
1)Flash HSPL
2)Flash your desired custom WinMo ROM and
3)install Android ROM on SD
**OR**2)Flash your desired NAND Android ROM (first taking care of incidentals like MAGLDR, etc-- as per Android flashing instructions)
Here's another instruction thread with numerous videos: http://forum.xda-developers.com/showthread.php?t=621930
HTH/ Good luck
Thanks RDionysus, I really appreciate all the info.
I'm going to try and go straight to HSPL4 from the bootloader.
I've actually never tried to flash anything, it just all of a sudden stopped booting on me which brought me to wanting to mod it
Going to try your suggestions, tytyty!
Hope it works out. Let us know!
So far I've installed HSPL and flashed the "NRG Engergize rom"
I'm still getting stuck on the bootup, now its stuck on the "NRG Energize" logo instead of the "Stick Together" logo.
I feel like I need to go back to stock to get that working baseline. How do I go about this step?
Should I go here: http://forum.xda-developers.com/showthread.php?t=577717
and download all the files under "Leo 1.48 ROMs" ?
WWE
ELL (Greek)
PTG
cakinlife said:
So far I've installed HSPL and flashed the "NRG Engergize rom"
I'm still getting stuck on the bootup, now its stuck on the "NRG Energize" logo instead of the "Stick Together" logo.
I feel like I need to go back to stock to get that working baseline. How do I go about this step?
Should I go here: http://forum.xda-developers.com/showthread.php?t=577717
and download all the files under "Leo 1.48 ROMs" ?
WWE
ELL (Greek)
PTG
Click to expand...
Click to collapse
NONONONO!!!
If you have a tmous the ONLY stock roms you can flash are tmous roms from T-Mobile.com or the tmous section here on xda.
Astock rom that is not tmous will destroy your phone.
This includes every rom in that thread.
samsamuel said:
NONONONO!!!
If you have a tmous the ONLY stock roms you can flash are tmous roms from T-Mobile.com or the tmous section here on xda.
Astock rom that is not tmous will destroy your phone.
This includes every rom in that thread.
Click to expand...
Click to collapse
Whoa thank you so much for letting me know!
I downloaded the upgrade "T-Mobile_HD2_MR_Software_3.14.531.1"
Do I just bootloader the phone and run the upgrade?
Correct ...
Hey sam,
The official Tmobile rom is an .exe tho.
Its not the usual format .nbh
What should I do?
cakinlife said:
Hey sam,
The official Tmobile rom is an .exe tho.
Its not the usual format .nbh
What should I do?
Click to expand...
Click to collapse
its actually an executable zip, not really a .exe.
If you rename the extension to .zip, it will open in whatever zip program you have installed, and you will see about 9 files inside, one of which is RUU_Signed.nbh, around 220meg size, its way the biggest file in there, you cant miss it,. , thats the rom(and radio and splash and spl), extract that and rename it, copy it to sd, and enter bootloader. The other files are the program that performs the flash over USB.
Thanks a mil, Im gonna try when i return from classes
So I reflashed the T-mobile rom with success however I still get stuck at the stick together screen even with a fresh install.
Anyone have any tips?
After reviewing the thread, I would consider a strong possibility that there is something wrong with the hardware. But before throwing in the towel, here's what I would try first:
REMOVE the SIM card and any SD card you have in the phone. Perform a hard reset. If you still get hung at the "stick together" screens then try...
RE-FLASH the stock (baseline) rom you obtained earlier, but this time first hook the phone up to your computer and perform a Task 29, then flash, and finally hard reset. Don't skip any steps, and leave out of the phone both your sim card and the microSD card (in case one of them are faulty). If, after the final hard-reset your phone manages to successfully boot up all the way, then insert the cards and see if everything is operational.
Good luck.
I've searched about trying to fix this on my own, but i have a feeling i may have caused more of a problem.
so trying to move back from android with a HSPL, i managed to install the original rom, but couldn't get rid of the CotullaHSPL when i flashed the new via USB.
so i looked for a Radio fix and ended up using the RUU_SIGNED.nbh radio from the same pack i used to install the rom
RUU_Leo_HTC_WWE_1.48.405.2_Radio_Signed_15.28.50.07U_2.05.51.05_2_Ship
Radio i am on now is the SPL-3.03.000 XE.
So after i installed it it says "software update failed, please try again."
attempted to try boot and keeps saying the same thing. Went into MAGDLR to try and reinstall the same Radio again after a soft reset and it comes up with 00028002 with NOT ALLOWED underneath this error number.
i attempted to reinstall is the rom, but not it just keeps stopping and telling me i cannot.
Any help on this would be amazing, not sure whether i should try a task28/29 or whether there is a simple fix to this problem.
i didn't install the rom off the SD card, but i did install the Radio off the SD card.
it needs to go back to the original rom so i can claim warranty because of the touchscreen!
Thanks guys and i hope this was enough detail for someone to step in and help me and maybe someone else at the same time!
Drummerman44 said:
I've searched about trying to fix this on my own, but i have a feeling i may have caused more of a problem.
so trying to move back from android with a HSPL, i managed to install the original rom, but couldn't get rid of the CotullaHSPL when i flashed the new via USB.
Click to expand...
Click to collapse
hspl thread, post 1, hspl can only be removed by flashing stock rom from SD card or by using the hspl.exe utility.
so i looked for a Radio fix and ended up using the RUU_SIGNED.nbh radio from the same pack i used to install the rom
RUU_Leo_HTC_WWE_1.48.405.2_Radio_Signed_15.28.50.07U_2.05.51.05_2_Ship
Click to expand...
Click to collapse
that's the whole rom radio and spl, not just a radio. It will have flashed the radio when you did the USB flash.
Radio i am on now is the SPL-3.03.000 XE.
Click to expand...
Click to collapse
that's not a radio, that's spl 3.03.0000 which goes with 3.14 roms.
So after i installed it it says "software update failed, please try again."
Click to expand...
Click to collapse
the leoimg.nbh you mentioned can't be from the rom you posted. I'm gonna assume (because the outcome would be what you have now) that you flashed a stock 3.14 rom from SD, and step 1 is hspl being replaced by the stock spl for that rom, , in this case 3.03.0000,, then the phone reboots to start the flash, but because hspl has gone only the stock roms that match your phone will work, hence getting flash failed.
attempted to try boot and keeps saying the same thing. Went into MAGDLR
Click to expand...
Click to collapse
can't flash from magldr, I assume you mean bootloader,, coloured stripey screen.
to try and reinstall the same Radio again after a soft reset and it comes up with 00028002 with NOT ALLOWED underneath this error number. i attempted to reinstall is the rom, but not it just keeps stopping and telling me i cannot.
Click to expand...
Click to collapse
because its the wrong rom and there's no hspl to bypass the check.
Any help on this would be amazing, not sure whether i should try a task28/29 or
Click to expand...
Click to collapse
whether there is a simple fix to this problem.
Click to expand...
Click to collapse
yes, get correct stock rom, flash it from SD, done.
i didn't install the rom off the SD card, but i did install the Radio off the SD card.
it needs to go back to the original rom so i can claim warranty because of the touchscreen!
Thanks guys and i hope this was enough detail for someone to step in and help me and maybe someone else at the same time!
Click to expand...
Click to collapse
Correct stock rom. Must match country and provider, example mines from o2 UK, so only o2 UK stock roms can be used.
The rom you posted the name of, see it says "HTC wwe" well the HTC bit means it's unbranded,example bought from carphone warehouse. If your phone came from o2, it would say o2 wwe
Oh and forget about the radio, it comes with the rom.
Bit off topic but once I've flashed MAGDLR can I ever go back to stock WinMO 6.5. I f'ed up and didn't SIM unlock my phone before I started hacking it up ( Hard SPL & MAGDLR)
nicknowsky said:
Bit off topic but once I've flashed MAGDLR can I ever go back to stock WinMO 6.5. I f'ed up and didn't SIM unlock my phone before I started hacking it up ( Hard SPL & MAGDLR)
Click to expand...
Click to collapse
flash stock rom. magldr gone.
samsamuel said:
flash stock rom. magldr gone.
Click to expand...
Click to collapse
figured that would be the course of action. Any particular stock TMOUS firmware I should flash.
Boy I sold my first HD2 about this time last year, just got a new one yesterday. And I gotta say WOW, this device has just gone crazy DEVn since the last time i owned it. Crazy things.
Doesn't matter, 2.10, 2.13 and 3.14 are the release versions.
samsamuel said:
Doesn't matter, 2.10, 2.13 and 3.14 are the release versions.
Click to expand...
Click to collapse
Perfect! thank you buddy.