I've searched about trying to fix this on my own, but i have a feeling i may have caused more of a problem.
so trying to move back from android with a HSPL, i managed to install the original rom, but couldn't get rid of the CotullaHSPL when i flashed the new via USB.
so i looked for a Radio fix and ended up using the RUU_SIGNED.nbh radio from the same pack i used to install the rom
RUU_Leo_HTC_WWE_1.48.405.2_Radio_Signed_15.28.50.07U_2.05.51.05_2_Ship
Radio i am on now is the SPL-3.03.000 XE.
So after i installed it it says "software update failed, please try again."
attempted to try boot and keeps saying the same thing. Went into MAGDLR to try and reinstall the same Radio again after a soft reset and it comes up with 00028002 with NOT ALLOWED underneath this error number.
i attempted to reinstall is the rom, but not it just keeps stopping and telling me i cannot.
Any help on this would be amazing, not sure whether i should try a task28/29 or whether there is a simple fix to this problem.
i didn't install the rom off the SD card, but i did install the Radio off the SD card.
it needs to go back to the original rom so i can claim warranty because of the touchscreen!
Thanks guys and i hope this was enough detail for someone to step in and help me and maybe someone else at the same time!
Drummerman44 said:
I've searched about trying to fix this on my own, but i have a feeling i may have caused more of a problem.
so trying to move back from android with a HSPL, i managed to install the original rom, but couldn't get rid of the CotullaHSPL when i flashed the new via USB.
Click to expand...
Click to collapse
hspl thread, post 1, hspl can only be removed by flashing stock rom from SD card or by using the hspl.exe utility.
so i looked for a Radio fix and ended up using the RUU_SIGNED.nbh radio from the same pack i used to install the rom
RUU_Leo_HTC_WWE_1.48.405.2_Radio_Signed_15.28.50.07U_2.05.51.05_2_Ship
Click to expand...
Click to collapse
that's the whole rom radio and spl, not just a radio. It will have flashed the radio when you did the USB flash.
Radio i am on now is the SPL-3.03.000 XE.
Click to expand...
Click to collapse
that's not a radio, that's spl 3.03.0000 which goes with 3.14 roms.
So after i installed it it says "software update failed, please try again."
Click to expand...
Click to collapse
the leoimg.nbh you mentioned can't be from the rom you posted. I'm gonna assume (because the outcome would be what you have now) that you flashed a stock 3.14 rom from SD, and step 1 is hspl being replaced by the stock spl for that rom, , in this case 3.03.0000,, then the phone reboots to start the flash, but because hspl has gone only the stock roms that match your phone will work, hence getting flash failed.
attempted to try boot and keeps saying the same thing. Went into MAGDLR
Click to expand...
Click to collapse
can't flash from magldr, I assume you mean bootloader,, coloured stripey screen.
to try and reinstall the same Radio again after a soft reset and it comes up with 00028002 with NOT ALLOWED underneath this error number. i attempted to reinstall is the rom, but not it just keeps stopping and telling me i cannot.
Click to expand...
Click to collapse
because its the wrong rom and there's no hspl to bypass the check.
Any help on this would be amazing, not sure whether i should try a task28/29 or
Click to expand...
Click to collapse
whether there is a simple fix to this problem.
Click to expand...
Click to collapse
yes, get correct stock rom, flash it from SD, done.
i didn't install the rom off the SD card, but i did install the Radio off the SD card.
it needs to go back to the original rom so i can claim warranty because of the touchscreen!
Thanks guys and i hope this was enough detail for someone to step in and help me and maybe someone else at the same time!
Click to expand...
Click to collapse
Correct stock rom. Must match country and provider, example mines from o2 UK, so only o2 UK stock roms can be used.
The rom you posted the name of, see it says "HTC wwe" well the HTC bit means it's unbranded,example bought from carphone warehouse. If your phone came from o2, it would say o2 wwe
Oh and forget about the radio, it comes with the rom.
Bit off topic but once I've flashed MAGDLR can I ever go back to stock WinMO 6.5. I f'ed up and didn't SIM unlock my phone before I started hacking it up ( Hard SPL & MAGDLR)
nicknowsky said:
Bit off topic but once I've flashed MAGDLR can I ever go back to stock WinMO 6.5. I f'ed up and didn't SIM unlock my phone before I started hacking it up ( Hard SPL & MAGDLR)
Click to expand...
Click to collapse
flash stock rom. magldr gone.
samsamuel said:
flash stock rom. magldr gone.
Click to expand...
Click to collapse
figured that would be the course of action. Any particular stock TMOUS firmware I should flash.
Boy I sold my first HD2 about this time last year, just got a new one yesterday. And I gotta say WOW, this device has just gone crazy DEVn since the last time i owned it. Crazy things.
Doesn't matter, 2.10, 2.13 and 3.14 are the release versions.
samsamuel said:
Doesn't matter, 2.10, 2.13 and 3.14 are the release versions.
Click to expand...
Click to collapse
Perfect! thank you buddy.
Related
here is the thing from the start.
a friend of mine bought a HD2 from hong-kong.
after installing a cab file for hebrew support the device wont go up.
hard reset to the device didnt help.
so i thought i should hspl the device and then flash the new nrg rom.
after i did hspl from version 1.66 i made a ROM FLASH BEFORE RADIO FLASH.
anyways the NRG system refused to go up then i made radio upadte and tried flash again to NRG rom but the flash keep stucking in the middle every time.
i got stucked with the error cable code in bootloader menu.
flashed from sd the newest ROM 3.14.405.2 still nothing changed still with error and now without the HSPL.
is there anything else i missed?
JUST TRIED TASK29..afte 4% stopped with messege not allowed
Welcome to the dark side,I did the same thing,I followed someones advice and flashed the official 3.14 from the SD card,now I am stuck at the bootloader with SPL 3.03.
Lots of peaople here have become bummers asking for a new HSPL but the smart guys seem to be turning a deaf ear.
try to flash earlier official rom e.g 1.66 rom not from sd card but with the pc
hagba said:
Welcome to the dark side,I did the same thing,I followed someones advice and flashed the official 3.14 from the SD card,now I am stuck at the bootloader with SPL 3.03.
Lots of peaople here have become bummers asking for a new HSPL but the smart guys seem to be turning a deaf ear.
Click to expand...
Click to collapse
Holy h*t...
Are you freaking crazy?
You MUST NOT flash a original ROM from SD card... That will overwrite the hardspl...
If you guys follow the RTFM tradition before do something you don't understand, then that would not happen...
Now you have to wait until a new hardspl is released...
Maybe you should do a task 28/29 and flash 3.14 with RUU.
Before you guys do another stupid thing... Don't try a "task 2a".
Maybe it don't brick your device, but it also will not help.
coneman23 said:
here is the thing from the start.
a friend of mine bought a HD2 from hong-kong.
after installing a cab file for hebrew support the device wont go up.
hard reset to the device didnt help.
so i thought i should hspl the device and then flash the new nrg rom.
after i did hspl from version 1.66 i made a ROM FLASH BEFORE RADIO FLASH.
anyways the NRG system refused to go up then i made radio upadte and tried flash again to NRG rom but the flash keep stucking in the middle every time.
i got stucked with the error cable code in bootloader menu.
flashed from sd the newest ROM 3.14.405.2 still nothing changed still with error and now without the HSPL.
is there anything else i missed?
Click to expand...
Click to collapse
maybe try SSPL
Hi
ive had similar problem (stuck with hspl 3.03) and flashing official leoimg from sd card worked for me so it is worth trying.
Regards
artiik said:
Hi
ive had similar problem (stuck with hspl 3.03) and flashing official leoimg from sd card worked for me so it is worth trying.
Regards
Click to expand...
Click to collapse
Why you freaking guys flash an official ROM from SD-Card?
tired that all
i couldnt get offical flash..
keep getting not allowed messege on the screen.
the thing is that the 3.03 update wasnt successul either and stopped at 44%
coneman23 said:
i couldnt get offical flash..
keep getting not allowed messege on the screen.
the thing is that the 3.03 update wasnt successul either and stopped at 44%
Click to expand...
Click to collapse
Did you try to flash the HD2 with 3.14 ROM (with the RUU)?
Crusoe86 said:
Did you try to flash the HD2 with 3.14 ROM (with the RUU)?
Click to expand...
Click to collapse
yes i have from sd and from usb..getting 28002 not allowed.
tried mtty42.1 task 29 and task 28 55aa
still no hope.
What should task 55aa do? In my opinin it should flash everthing except the radio. Right?
What kind of HD2 sells HK? Is it an ordinary 512MB one?
Is this an original HTC? I know the chinese people does not like originals, they like to sell their own not working but nearly original looking phones...
Look at this Touch Diamond
What happens if you install the latest HSPL (2.08)?
Is it possible to flash a new SPL (does not matter if original or not)
What kind of Radio do you have actual on your Phone?
Many regards
Crusoe86 said:
What should task 55aa do? In my opinin it should flash everthing except the radio. Right?
What kind of HD2 sells HK? Is it an ordinary 512MB one?
Is this an original HTC? I know the chinese people does not like originals, they like to sell their own not working but nearly original looking phones...
Look at this Touch Diamond
What happens if you install the latest HSPL (2.08)?
Is it possible to flash a new SPL (does not matter if original or not)
What kind of Radio do you have actual on your Phone?
Many regards
Click to expand...
Click to collapse
it is the orginal,he bought the phone with the wwe_asia 1.66 rom with english and chinese.
as i said tried to flash to 1.66 and again with new 3.16. but still getting not allowed.
task 28 55aa should format the device but some say its working only in case of hspl.
and since my phonw now got the 3.03 spl i guess its not possible.
correct me if im wrong but my only optios seems to be jtag which cost here in some labs about 150$...
Oh my god... What shoudl I do with you?...
I don't want to brick my HD2 to try something for you...
But... Did you know something about a "Goldcard" method?
If not I will help you to create one. On other phones the Goldcard allows to flash ROMs from another Provider... For example you have a Vodafone ROM and want a Stock HTC ROM... Normally this should not work. With a Goldcard it does...
Maybe you have an old microSD Card which we can use?!
Maybe we can also try to flash it with SSPL. Did you try this, too?
I never used SSPL, maybe it did not work in Bootloder mode, but we will se this when we try it
That's really nice help, from you Crusoe86.
PINki92 said:
That's really nice help, from you Crusoe86.
Click to expand...
Click to collapse
I hope it will help the author...
I know how it feel when the own phone is broken.
My first HD2 was overrun by a car... And it takes me 5 month to repair it, because I can't get a keypad ribbon...
And my second HD2 is not really broken... My girlfriend loaned it two weeks ago for one week. She still has is, because she like the Android OS on it and until now she won't give it back to me. Now I have to wait until my Desire HD arrives me
What should I say... Women...
But... PPP works very well for her operator (BASE) on Android, I've interruptions every 5 minutes and I can be lucky if I can reconnect after each disconnect
Back to topic...
@coneman23:
I'll hope you've flashed a 2.**.50 radio (for e.g. 2.12.50) not a 2.**.51.
I've noticed, that those radios do not work with some ROMs.
Crusoe86 redirected me here.
is there actually a way to fix this?
maybe with goldcard and official 1.48 rom?
Here I am...
You could try HSPL3 to revert back to an older SPL. Maybe that works...
And you can try older Stock ROMs like the 1.48 (from SD card (I use an old one when I flash my HD2, maybe thats is more compatible like newer SDHC cards)).
Andhopefully it replaces the new SPL.
But I would try the Goldcard method or try to boot SSPL from bootloader mode...
My girlfriend has my HD2 actually. I can't try anything
Crusoe86 said:
Here I am...
You could try HSPL3 to revert back to an older SPL. Maybe that works...
And you can try older Stock ROMs like the 1.48 (from SD card (I use an old one when I flash my HD2, maybe thats is more compatible like newer SDHC cards)).
Andhopefully it replaces the new SPL.
But I would try the Goldcard method or try to boot SSPL from bootloader mode...
My girlfriend has my HD2 actually. I can't try anything
Click to expand...
Click to collapse
I dont know how to make a goldcard, so i cant make one.
I recommend that you try this (found in your thread).
If that does not work, we can make a Goldcard.
It is not very difficult, but this solution in your thread seems to be easier if it works.
Hello.
Okay so I had HSPL 1.42 on my phone.
I extracted the 'RUU_signed.nbh' of the official 3.14 stock ROM from the .exe file that HTC provided.
I changed it's name to 'LEOIMG.nbh' and placed it on the root of my SD card.
I then tried flashing the new ROM by entering the bootloader.
For some reason (power was NOT lost) the ROM upgrade failed half way through.
Now when I try and boot the phone normally, it displays a grey screen with an alert symbol saying 'Software update failed. Please try again'
It then takes me to the bootloader screen
The SPL version has changed from HSPL 1.42 to SPL-3.03.0000
Below these details it displays the message 'Upgrade ROM code error. Please try again'
Due to the SPL version being 3.03, I am unable to install any HSPL version onto it again.
When I try to flash the official ROM 3.14 again via the official RUU (via laptop) it fails
What do I do? IS MY PHONE BRICKED?!
i think your hd2 is not bricked just without os and i think you are going to wait for the new hspl
Okay
Thanks for your reply
I seem to remember somewhere that I might be able to solve it somehow by using a friend's HD2...hmmm...not sure though
EDIT: I managed to finally download the 1.48 stock ROM. When I try to change to this ROM via the RUU it reaches 1% and then fails.
MTN_HD2 said:
i already know what will happen . the 3.14 rom cant work correctly (in another word works like ****) with SPLs other than 3.03. so if i install it since theres an HSPL on it the SPL version wont change to 3.03 . to change its spl , you should install the rom once more from the sd card which will freeze in the middle of the update and the result is a f'd ROM and SPL 3.03 .
since theres no HSPL support on 3.03 , theres no comeback and you will be f'd until a new HSPL is released
btw what SPL version does the 1.66 official update install?
Click to expand...
Click to collapse
I found this on another thread, I think this is basically my problem. Joy.
I had the same problem. You have to install the original shipped rom, for example of you have a vodafone branded device, you have to install the original vodafone-rom via RUU.
gamer-Kenny said:
I had the same problem. You have to install the original shipped rom, for example of you have a vodafone branded device, you have to install the original vodafone-rom via RUU.
Click to expand...
Click to collapse
My device is unbranded, but when I put the serial number in to HTC's update download page thing it says it is unsuitable, so I used someone elses unbranded S/N and used that instead, maybe that's why it happened? Is there a solution?
For reference - This is what is displayed when I try to flash back to an old stock ROM via SD Card (Volume Down and Power putton)
http://img2.imageshack.us/img2/3360/dsc01951x.jpg
c'mon pleaseeee
try to flash you stock rom via sd card. that MUST work!
DN41
DN41 said:
try to flash you stock rom via sd card. that MUST work!
DN41
Click to expand...
Click to collapse
You mean by extracting the .nbh file from a stock ROM? I tried that and I seem to remember that it failed
mh..i'm nearly 100% sure, that it has to work...
was it really YOUR stock rom? sure that your phone wasnt branded?
DN41
Well I got my phone second hand from CeX (English shop)
It had the unbranded stock ROM on it, and no physical branding on the phone like the T-Mobile name. But when I put in my S/N to the unbranded update thingy it said the download wasn't suitable for my device so I used someone elses S/N
so it seems that they flashed the stock rom, but your phone is originally branded.
if i was you, i would call them and ask or i would use my own S/N and check all downloads on htc.com. then you'll see of an o2, tmo, vdf or whatever is downloadable.
the one, which is downloadable with your s/n, should be flashed via sd.
DN41
DN41 said:
so it seems that they flashed the stock rom, but your phone is originally branded.
if i was you, i would call them and ask or i would use my own S/N and check all downloads on htc.com. then you'll see of an o2, tmo, vdf or whatever is downloadable.
the one, which is downloadable with your s/n, should be flashed via sd.
DN41
Click to expand...
Click to collapse
Ok, cheers, I'll try that and report back
i'm with you
DN41
DN41 said:
i'm with you
DN41
Click to expand...
Click to collapse
Okay, it's a Vodafone device, so what do I need to do? Extract the vodafone .nbh file from the ROM and then flash it via SD?
you're right!
DN41
DN41 said:
you're right!
DN41
Click to expand...
Click to collapse
Okay, I'll try that and report back
*hopes it works*
Thanks for your help dude
it's a pleasure (=
i hope it works
DN41
DN41 said:
it's a pleasure (=
i hope it works
DN41
Click to expand...
Click to collapse
OMG, I love you dude, complete legend. Updating now, so far:
RADIO_V2 - OK
RCUST - OK
BOOTLOADER - OK
SPLASH1 - OK
OS -
CONFIGDATA -
That's further than I got before
I think it's working
Please help me,how can i remove SPL 3.03
I`m using Artemis v44.0 which goes with ROM 3.14....
I want to removed it and go back to 1.43.000
mrachni said:
Please help me,how can i remove SPL 3.03
I`m using Artemis v44.0 which goes with ROM 3.14....
I want to removed it and go back to 1.43.000
Click to expand...
Click to collapse
Reinstall previous stock ROM.
But how? Where to find it?
I must do that from SD card if i understand?
mrachni said:
But how? Where to find it?
I must do that from SD card if i understand?
Click to expand...
Click to collapse
No, you can flash it over ActiveSync.
About stock ROM; with aria ROM do you have? do you have a branded device?
SPL - 3.03 and ROM 3.14... Affecting installation for W7?
I have noticed that I have the same problem with my HD2 6.5
I have on it:
SPL-3.03.0000
ROM version - 3.14.405.2 (04666) WWE
What my main concern is however, is whether you think it's possible for me to install Windows 7 on this model or do I have to go to an older ROM and SPL version to achieve this.
Any help greatly appreciated thank you
Innvizible said:
I have noticed that I have the same problem with my HD2 6.5
I have on it:
SPL-3.03.0000
ROM version - 3.14.405.2 (04666) WWE
What my main concern is however, is whether you think it's possible for me to install Windows 7 on this model or do I have to go to an older ROM and SPL version to achieve this.
Any help greatly appreciated thank you
Click to expand...
Click to collapse
Ass for I know, to be able to install WP7 ROM on your HD2 you will need HSPL. And probably you know it already, but stock ROM 3.14 isn't compatible with HSPL, so yes you need to downgrade your stock ROM before.
mrachni said:
But how? Where to find it?
I must do that from SD card if i understand?
Click to expand...
Click to collapse
To get back to your original SPL, you will need to do it using SD card method. If you use Activesync method, it will only upgrade the SPL and won't downgrade.
similar problem on my HD2
Thanks for the heads up, I did as suggested before...
So..
1. I got ROM 1.66 with Radio 15.30.50 from HTC forum and installed in order to downgrade my ROM
2. After that I flashed HSPL2 and selected SPL-2.08.HSPL
(After this it showed phone was hacked successfully and after it rebooted I can't get past the hanging white screen)
3. I *ignored this* then switched off phone and got into boatloader again and ran MAGLDR112 and the RUU loaded up to 100% and booted up but again it still hangs at the white screen stopping at the htc logo. That's when I thought probably step 2 was where I had hit a problem...
4. After a couple of attempts I decided to put it back to the 1.66 I got from HTC forum so I can use phone for the meanwhile
- I have been following the threads, and a lot of people seem to suggest that the white screen is something to do with having the wrong radio version. (Do you share the same thoughts or have I gone completely wrong elsewhere in your opinion?)
- And if it is a radio issue which do you think goes best with the MAGLDR112 and LEO70-ROM
- If someone could paste a link I'd be happy to follow it up
[Starting to feel like one of those people forum heads are not fond of for not reading and understanding enough]
tazeemn said:
To get back to your original SPL, you will need to do it using SD card method. If you use Activesync method, it will only upgrade the SPL and won't downgrade.
Click to expand...
Click to collapse
Not right sir, even if you install stock ROM over ActiveSync it will upgrade and also downgrade your SPL version.
Innvizible said:
Thanks for the heads up, I did as suggested before...
So..
1. I got ROM 1.66 with Radio 15.30.50 from HTC forum and installed in order to downgrade my ROM
2. After that I flashed HSPL2 and selected SPL-2.08.HSPL
(After this it showed phone was hacked successfully and after it rebooted I can't get past the hanging white screen)
3. I *ignored this* then switched off phone and got into boatloader again and ran MAGLDR112 and the RUU loaded up to 100% and booted up but again it still hangs at the white screen stopping at the htc logo. That's when I thought probably step 2 was where I had hit a problem...
4. After a couple of attempts I decided to put it back to the 1.66 I got from HTC forum so I can use phone for the meanwhile
- I have been following the threads, and a lot of people seem to suggest that the white screen is something to do with having the wrong radio version. (Do you share the same thoughts or have I gone completely wrong elsewhere in your opinion?)
- And if it is a radio issue which do you think goes best with the MAGLDR112 and LEO70-ROM
- If someone could paste a link I'd be happy to follow it up
[Starting to feel like one of those people forum heads are not fond of for not reading and understanding enough]
Click to expand...
Click to collapse
Stock ROM 1.66 have radio 2.07.51 integrated; but Android builds needs minimum radio 2.08.50 so before you install Android upgrade your radio.
kurt-willems said:
Not right sir, even if you install stock ROM over ActiveSync it will upgrade and also downgrade your SPL version.
Click to expand...
Click to collapse
You are right about that. I stand corrected. This was proven through my tests yesterday. In the past, with my Athena, it worked differently.
kurt-willems said:
Stock ROM 1.66 have radio 2.07.51 integrated; but Android builds needs minimum radio 2.08.50 so before you install Android upgrade your radio.
Click to expand...
Click to collapse
2.07.50 also worked fine for me for WinMO 6.5 (Energy), Darkstone SuperRam 1.5 and WP7. In fact WP7 NAND & Darkstone from SD ran fine with MAGLDR112.
Updated Radio solved problem
kurt-willems said:
Stock ROM 1.66 have radio 2.07.51 integrated; but Android builds needs minimum radio 2.08.50 so before you install Android upgrade your radio.
Click to expand...
Click to collapse
Worked like a charm. I put on Leo_RADIO_2.15.50.14** from one of the threads and from then on I then put back SPL-2.08HSPL and then loaded MAGLDR112 and it allowed me to access bootloader and from there I loaded the DWI file for Windows 7. Everything became kinda self-explanatory after following your help... Awesome, Windows 7 rocks... Off to activate the live services...
I was trying to flash the stock rom from the sd card in order to get rid of the hspl but I flashed it with the wrong rom and now my phone will not get past the 4 color screen. I tried to flash with the stock tmobile rom but I keep getting error. When I try to flash with the sd with the tmobile RUU it will say "loading..." and does nothing. I tried to run the exe file with windows and I will get errors everytime. Did I brick my phone?
I have a Tmobile US HD2 phone and without knowing better, I flashed it the first time with:
RUU_Leo_S_HTC_WWE_3.14.405.2_Radio_15.42.50.11U_2.15.50.14_LEO_S_Ship.exe
What can I do now?
can you get into bootloader?
if so, what does it say?
jsmccabe78 said:
can you get into bootloader?
if so, what does it say?
Click to expand...
Click to collapse
Is the bootloader the red/green/blue/white screen? If so, yes I see that screen and it saids "Upgrade ROM code error Please try again"
I have tried to flash again and again from the SD card and when I flash with the official Tmous ROM, it will get stuck at the installing screen and does nothing. If I try to restore with windows using the exe file, it will look like its doing something but will error out after a few minutes staying at 0%.
Also right now it shows
PB91120 SS-B3
SPL-3.03.000 XE
MicroP(LED) 0x05
MicroP(Touch) 0x50
Do you mean that you have a T-Mous Usa device, the one with red and green buttoned? and 1GB of memory?
kurt-willems said:
Do you mean that you have a T-Mous Usa device, the one with red and green buttoned? and 1GB of memory?
Click to expand...
Click to collapse
Yes, and I tried flashing with the WWE version without knowing better
Is my phone bricked? And is it out of warrantee now?
vwrado said:
Yes, and I tried flashing with the WWE version without knowing better
Is my phone bricked? And is it out of warrantee now?
Click to expand...
Click to collapse
Good question, I have sean lot of users installing a wrong ROM, but on the correct device.
the HD2 T-Mous device isn't the same as the european device.
But I'm not sure at 100% you can save it.(lucky the new 3.14 european stock rom have the same radio if not it was total stuck.)
but now how to restore
I mean you have already try to flash (the correct on) over SD and it didn't works.
can you tell witch error you get when you was trying to flash the correct stock ROM over SD or by your PC?
vwrado said:
Is the bootloader the red/green/blue/white screen? If so, yes I see that screen and it saids "Upgrade ROM code error Please try again"
I have tried to flash again and again from the SD card and when I flash with the official Tmous ROM, it will get stuck at the installing screen and does nothing. If I try to restore with windows using the exe file, it will look like its doing something but will error out after a few minutes staying at 0%.
Also right now it shows
PB91120 SS-B3
SPL-3.03.000 XE
MicroP(LED) 0x05
MicroP(Touch) 0x50
Click to expand...
Click to collapse
I may be wrong, however, if you're still having a problem you may need to reinstall MAGLDR again after a failed sd card flash.
kurt-willems said:
Good question, I have sean lot of users installing a wrong ROM, but on the correct device.
the HD2 T-Mous device isn't the same as the european device.
But I'm not sure at 100% you can save it.(lucky the new 3.14 european stock rom have the same radio if not it was total stuck.)
but now how to restore
I mean you have already try to flash (the correct on) over SD and it didn't works.
can you tell witch error you get when you was trying to flash the correct stock ROM over SD or by your PC?
Click to expand...
Click to collapse
When trying to flash the correct ROM over SD it will just have the plain white screen with "installing..." on the top and it does nothing. I left it alone for an hour and nothing happens.
When trying to flash with the exe on my computer, I will go through all the process and click next, next next, then it tries to update the rom (on the phone it shows the black HTC screen with the status bar) and it stays at that screen at 0% and after a few minutes it will show update failed on the pc while the phone still shows the status bar at 0%. The PC shows Error 262: update error, The rom update utility encountered communication errors during the update process.
ElaineD said:
I may be wrong, however, if you're still having a problem you may need to reinstall MAGLDR again after a failed sd card flash.
Click to expand...
Click to collapse
Just tried MAGLDR and it shows the same problem as if I was trying to flash the correct ROM.
vwrado said:
When trying to flash the correct ROM over SD it will just have the plain white screen with "installing..." on the top and it does nothing. I left it alone for an hour and nothing happens.
When trying to flash with the exe on my computer, I will go through all the process and click next, next next, then it tries to update the rom (on the phone it shows the black HTC screen with the status bar) and it stays at that screen at 0% and after a few minutes it will show update failed on the pc while the phone still shows the status bar at 0%. The PC shows Error 262: update error, The rom update utility encountered communication errors during the update process.
Just tried MAGLDR and it shows the same problem as if I was trying to flash the correct ROM.
Click to expand...
Click to collapse
Have you tried a Gold Card method?
silverwind said:
Have you tried a Gold Card method?
Click to expand...
Click to collapse
What is the gold card method?
Would it be safe to just send my device as it is now? All that it saids when I boot it up is SPL 3.03 in the bootloader screen. Would that make it out of warrantee if I flashed the wrong rom?
i think so as the hspl is off your phone. out of ideas otherwise, ya know? what can it hurt (assuming kurt, etc. don't have ideas)?
question will be if they can see the rom, etc. but even then it still is official, just not right.
jsmccabe78 said:
i think so as the hspl is off your phone. out of ideas otherwise, ya know? what can it hurt (assuming kurt, etc. don't have ideas)?
question will be if they can see the rom, etc. but even then it still is official, just not right.
Click to expand...
Click to collapse
I called and asked about it today and they said it is out of warranty if I flashed it with the wrong official rom
vwrado said:
I called and asked about it today and they said it is out of warranty if I flashed it with the wrong official rom
Click to expand...
Click to collapse
Don't lose hope and be patient. There are a LOT of people much smarter than me here. It's just that they're preoccupied right now doing a much need reorganization of the XDA site. Keep reading and give the smart guys a chance to help you by continuing to post any additional info you can gleen from your phone problem.
Hmm, it isn't looking good.
If you only have flashed a wrong radio, well it wasn't so obvious for HTC to see what have caused the problem so there was 50% chance that the warranty worked. (but you may never say them that you have flashed, if not thy will suspect a wrong manipulation of the user.)
But beside that you have flashed the stock ROM form a other device. the problem is the SPL => 3.03 this isn't for your device.
SPL are like Secondary Program Loader. Think of this in the same sense as bios on a pc. (it sets where your system boots from, intialises sub system process etc)
so this is a bigger problem.
And when you will send your device to HTC repair center thy will see directly the wrong spl; so no warranty.
I'm sorry to say, but personally I don't see a solution.
vwrado said:
I was trying to flash the stock rom from the sd card in order to get rid of the hspl but I flashed it with the wrong rom and now my phone will not get past the 4 color screen. I tried to flash with the stock tmobile rom but I keep getting error. When I try to flash with the sd with the tmobile RUU it will say "loading..." and does nothing. I tried to run the exe file with windows and I will get errors everytime. Did I brick my phone?
I have a Tmobile US HD2 phone and without knowing better, I flashed it the first time with:
RUU_Leo_S_HTC_WWE_3.14.405.2_Radio_15.42.50.11U_2.15.50.14_LEO_S_Ship.exe
What can I do now?
Click to expand...
Click to collapse
Look up post #13 on this thread, similar problem:
http://forum.xda-developers.com/showthread.php?t=903641
stevedebi said:
Look up post #13 on this thread, similar problem:
http://forum.xda-developers.com/showthread.php?t=903641
Click to expand...
Click to collapse
Very optimistic, but he have install the latest EU/Asian stock ROM on his T-Mous device.
Installing these latest stock ROM install the spl 3.03 (who isn't the same/compatible) this brakes his device.
kurt-willems said:
Very optimistic, but he have install the latest EU/Asian stock ROM on his T-Mous device.
Installing these latest stock ROM install the spl 3.03 (who isn't the same/compatible) this brakes his device.
Click to expand...
Click to collapse
I'm assuming that he would know to install a TMOUS stock ROM, not a foreign version. My point was that it was possible to recover by installing a stock ROM.
stevedebi said:
I'm assuming that he would know to install a TMOUS stock ROM, not a foreign version. My point was that it was possible to recover by installing a stock ROM.
Click to expand...
Click to collapse
I know what you mean. but when he have installed the foreign stock ROM version, it have install a incompatible/wrong spl version, this brakes the device.
kurt-willems said:
I know what you mean. but when he have installed the foreign stock ROM version, it have install a incompatible/wrong spl version, this brakes the device.
Click to expand...
Click to collapse
Well, the other thread had the OP listing the exact same message, and she had also accidentally installed the wrong SPL. I just thought it deserved a look.
Phone's bootloader info:
PB81120 SS-B3
SPL-2.10.0000 8G XE
Also, I think I have the 1024 Leo, bought from T-Mobile with the Green/Red call/hangup buttons.
Can anyone help me with the downgrade?
From the official HSPL thread I read
"It is possible to downgrade to this SPL, by just flashing to an Official ROM
with this SPL version."
Can someone help a noob with this process? I've never flashed b4!
Also, my phone currently won't load and is stuck on the "stick together screen"
cakinlife,
Start here: http://forum.xda-developers.com/showthread.php?t=653614
Out of curiosity, why do you want to downgrade to 1.42 SPL?
After reading some guides, I think I need to downgrade to 1.42 in order to install HSPL don't I?
After that, I want to install android.
EDITTTTT
Hold up, I just continued reading some other stuff and found out I don't need to downgrade.
Problem is my phone gets stuck on the "Stick Together" screen. How do I install HSPL if I can't get phone to load?
Any tips? Thanks
cakinlife said:
After reading some guides, I think I need to downgrade to 1.42 in order to install HSPL don't I?
After that, I want to install android.
EDITTTTT
Hold up, I just continued reading some other stuff and found out I don't need to downgrade.
Click to expand...
Click to collapse
That's correct. With the most recent HSPL4, you can go direct to 2.08.HSPL or 3.03 (2.08 if you wanna go Android)
Problem is my phone gets stuck on the "Stick Together" screen. How do I install HSPL if I can't get phone to load?
Any tips? Thanks
Click to expand...
Click to collapse
Has this phone ever booted up? Have you flashed something previously which caused this condition? Radio?
In any case, I'm assuming you can get into bootloader, so you can just try running HSPL4 on your computer with your HD2 in bootloader mode-- that should allow you to install HSPL, and you can see if this rectifies the loading problem and then go from there. Alternatively, you can try starting totally from scratch by installing an appropriate factory/shipped ROM (with proper radio) from the microSD card (see the flashing thread for instructions). If this brings your phone back to a working baseline, then:
1)Flash HSPL
2)Flash your desired custom WinMo ROM and
3)install Android ROM on SD
**OR**2)Flash your desired NAND Android ROM (first taking care of incidentals like MAGLDR, etc-- as per Android flashing instructions)
Here's another instruction thread with numerous videos: http://forum.xda-developers.com/showthread.php?t=621930
HTH/ Good luck
Thanks RDionysus, I really appreciate all the info.
I'm going to try and go straight to HSPL4 from the bootloader.
I've actually never tried to flash anything, it just all of a sudden stopped booting on me which brought me to wanting to mod it
Going to try your suggestions, tytyty!
Hope it works out. Let us know!
So far I've installed HSPL and flashed the "NRG Engergize rom"
I'm still getting stuck on the bootup, now its stuck on the "NRG Energize" logo instead of the "Stick Together" logo.
I feel like I need to go back to stock to get that working baseline. How do I go about this step?
Should I go here: http://forum.xda-developers.com/showthread.php?t=577717
and download all the files under "Leo 1.48 ROMs" ?
WWE
ELL (Greek)
PTG
cakinlife said:
So far I've installed HSPL and flashed the "NRG Engergize rom"
I'm still getting stuck on the bootup, now its stuck on the "NRG Energize" logo instead of the "Stick Together" logo.
I feel like I need to go back to stock to get that working baseline. How do I go about this step?
Should I go here: http://forum.xda-developers.com/showthread.php?t=577717
and download all the files under "Leo 1.48 ROMs" ?
WWE
ELL (Greek)
PTG
Click to expand...
Click to collapse
NONONONO!!!
If you have a tmous the ONLY stock roms you can flash are tmous roms from T-Mobile.com or the tmous section here on xda.
Astock rom that is not tmous will destroy your phone.
This includes every rom in that thread.
samsamuel said:
NONONONO!!!
If you have a tmous the ONLY stock roms you can flash are tmous roms from T-Mobile.com or the tmous section here on xda.
Astock rom that is not tmous will destroy your phone.
This includes every rom in that thread.
Click to expand...
Click to collapse
Whoa thank you so much for letting me know!
I downloaded the upgrade "T-Mobile_HD2_MR_Software_3.14.531.1"
Do I just bootloader the phone and run the upgrade?
Correct ...
Hey sam,
The official Tmobile rom is an .exe tho.
Its not the usual format .nbh
What should I do?
cakinlife said:
Hey sam,
The official Tmobile rom is an .exe tho.
Its not the usual format .nbh
What should I do?
Click to expand...
Click to collapse
its actually an executable zip, not really a .exe.
If you rename the extension to .zip, it will open in whatever zip program you have installed, and you will see about 9 files inside, one of which is RUU_Signed.nbh, around 220meg size, its way the biggest file in there, you cant miss it,. , thats the rom(and radio and splash and spl), extract that and rename it, copy it to sd, and enter bootloader. The other files are the program that performs the flash over USB.
Thanks a mil, Im gonna try when i return from classes
So I reflashed the T-mobile rom with success however I still get stuck at the stick together screen even with a fresh install.
Anyone have any tips?
After reviewing the thread, I would consider a strong possibility that there is something wrong with the hardware. But before throwing in the towel, here's what I would try first:
REMOVE the SIM card and any SD card you have in the phone. Perform a hard reset. If you still get hung at the "stick together" screens then try...
RE-FLASH the stock (baseline) rom you obtained earlier, but this time first hook the phone up to your computer and perform a Task 29, then flash, and finally hard reset. Don't skip any steps, and leave out of the phone both your sim card and the microSD card (in case one of them are faulty). If, after the final hard-reset your phone manages to successfully boot up all the way, then insert the cards and see if everything is operational.
Good luck.