Hello.
Okay so I had HSPL 1.42 on my phone.
I extracted the 'RUU_signed.nbh' of the official 3.14 stock ROM from the .exe file that HTC provided.
I changed it's name to 'LEOIMG.nbh' and placed it on the root of my SD card.
I then tried flashing the new ROM by entering the bootloader.
For some reason (power was NOT lost) the ROM upgrade failed half way through.
Now when I try and boot the phone normally, it displays a grey screen with an alert symbol saying 'Software update failed. Please try again'
It then takes me to the bootloader screen
The SPL version has changed from HSPL 1.42 to SPL-3.03.0000
Below these details it displays the message 'Upgrade ROM code error. Please try again'
Due to the SPL version being 3.03, I am unable to install any HSPL version onto it again.
When I try to flash the official ROM 3.14 again via the official RUU (via laptop) it fails
What do I do? IS MY PHONE BRICKED?!
i think your hd2 is not bricked just without os and i think you are going to wait for the new hspl
Okay
Thanks for your reply
I seem to remember somewhere that I might be able to solve it somehow by using a friend's HD2...hmmm...not sure though
EDIT: I managed to finally download the 1.48 stock ROM. When I try to change to this ROM via the RUU it reaches 1% and then fails.
MTN_HD2 said:
i already know what will happen . the 3.14 rom cant work correctly (in another word works like ****) with SPLs other than 3.03. so if i install it since theres an HSPL on it the SPL version wont change to 3.03 . to change its spl , you should install the rom once more from the sd card which will freeze in the middle of the update and the result is a f'd ROM and SPL 3.03 .
since theres no HSPL support on 3.03 , theres no comeback and you will be f'd until a new HSPL is released
btw what SPL version does the 1.66 official update install?
Click to expand...
Click to collapse
I found this on another thread, I think this is basically my problem. Joy.
I had the same problem. You have to install the original shipped rom, for example of you have a vodafone branded device, you have to install the original vodafone-rom via RUU.
gamer-Kenny said:
I had the same problem. You have to install the original shipped rom, for example of you have a vodafone branded device, you have to install the original vodafone-rom via RUU.
Click to expand...
Click to collapse
My device is unbranded, but when I put the serial number in to HTC's update download page thing it says it is unsuitable, so I used someone elses unbranded S/N and used that instead, maybe that's why it happened? Is there a solution?
For reference - This is what is displayed when I try to flash back to an old stock ROM via SD Card (Volume Down and Power putton)
http://img2.imageshack.us/img2/3360/dsc01951x.jpg
c'mon pleaseeee
try to flash you stock rom via sd card. that MUST work!
DN41
DN41 said:
try to flash you stock rom via sd card. that MUST work!
DN41
Click to expand...
Click to collapse
You mean by extracting the .nbh file from a stock ROM? I tried that and I seem to remember that it failed
mh..i'm nearly 100% sure, that it has to work...
was it really YOUR stock rom? sure that your phone wasnt branded?
DN41
Well I got my phone second hand from CeX (English shop)
It had the unbranded stock ROM on it, and no physical branding on the phone like the T-Mobile name. But when I put in my S/N to the unbranded update thingy it said the download wasn't suitable for my device so I used someone elses S/N
so it seems that they flashed the stock rom, but your phone is originally branded.
if i was you, i would call them and ask or i would use my own S/N and check all downloads on htc.com. then you'll see of an o2, tmo, vdf or whatever is downloadable.
the one, which is downloadable with your s/n, should be flashed via sd.
DN41
DN41 said:
so it seems that they flashed the stock rom, but your phone is originally branded.
if i was you, i would call them and ask or i would use my own S/N and check all downloads on htc.com. then you'll see of an o2, tmo, vdf or whatever is downloadable.
the one, which is downloadable with your s/n, should be flashed via sd.
DN41
Click to expand...
Click to collapse
Ok, cheers, I'll try that and report back
i'm with you
DN41
DN41 said:
i'm with you
DN41
Click to expand...
Click to collapse
Okay, it's a Vodafone device, so what do I need to do? Extract the vodafone .nbh file from the ROM and then flash it via SD?
you're right!
DN41
DN41 said:
you're right!
DN41
Click to expand...
Click to collapse
Okay, I'll try that and report back
*hopes it works*
Thanks for your help dude
it's a pleasure (=
i hope it works
DN41
DN41 said:
it's a pleasure (=
i hope it works
DN41
Click to expand...
Click to collapse
OMG, I love you dude, complete legend. Updating now, so far:
RADIO_V2 - OK
RCUST - OK
BOOTLOADER - OK
SPLASH1 - OK
OS -
CONFIGDATA -
That's further than I got before
I think it's working
Related
Dear all,
I am facing a problem here.
Had a hardware problem with the built in microphone and had to revert back to stock rom/splash screen/Original SPL in that order.
Had no problems reverting the ROM and the original screen back (just a couple of flashes), BUT when I tried to revert back the stock SPL here http://forum.xda-developers.com/attachment.php?attachmentid=110582&d=1220406410
I renamed the file to RAPHIMG.nbh, copied it to the root of the SD Card and entered bootloader mode and this is what it displays:
RAPH100
SPL-1.90.0000 (Which means a successful flash)
!!! AND THEN THIS !!!
"Upgrade ROM code error"
"Please try again"
This message is located in the last part of the green stripe in the tri color screen (bootloader)
It is then followed by the grey screen automatically which you are supposed to press volume key to start a flash process BUT it just HANGS at Loading...
unabling you to flash anything.
It's actually a friend's phone too so I guess you understand how hard it is....
Any help is appreciated
Thanks in advance
Possible image might be corrupt on sd card, grey screen is shown when it's trying to read sd, have you tried with sd removed? if you get to 2nd tricolor screen with sd removed i would use usb flash to restore it to working order..
Da_G said:
Possible image might be corrupt on sd card, grey screen is shown when it's trying to read sd, have you tried with sd removed? if you get to 2nd tricolor screen with sd removed i would use usb flash to restore it to working order..
Click to expand...
Click to collapse
Removed the SD and it stays at the tricolor screen with the spl version as mentioned in 1st post.
Also, displaying the Upgrade ROM code error, please try again message
The mode is currently serial
What can I do from here?
fireblade63 said:
Dear all,
I am facing a problem here.
Had a hardware problem with the built in microphone and had to revert back to stock rom/splash screen/Original SPL in that order.
Had no problems reverting the ROM and the original screen back (just a couple of flashes), BUT when I tried to revert back the stock SPL here http://forum.xda-developers.com/attachment.php?attachmentid=110582&d=1220406410
I renamed the file to RAPHIMG.nbh, copied it to the root of the SD Card and entered bootloader mode and this is what it displays:
RAPH100
SPL-1.90.0000 (Which means a successful flash)
!!! AND THEN THIS !!!
"Upgrade ROM code error"
"Please try again"
This message is located in the last part of the green stripe in the tri color screen (bootloader)
It is then followed by the grey screen automatically which you are supposed to press volume key to start a flash process BUT it just HANGS at Loading...
unabling you to flash anything.
It's actually a friend's phone too so I guess you understand how hard it is....
Any help is appreciated
Thanks in advance
Click to expand...
Click to collapse
You cannot flash an SPL from the bootloader. You need to use SSPL. The directions can be found in the HardSPL thread.
NotATreoFan said:
You cannot flash an SPL from the bootloader. You need to use SSPL. The directions can be found in the HardSPL thread.
Click to expand...
Click to collapse
Hey man, thx for stopping by..
If I understand correctly, SSPL runs through the device which is stuck at bootloader currently... or am I hopefully wrong??
If you're at the tricolor screen and it reads serial, that should be fine.. plug in usb and it should switch to usb.. then flash a stock carrier rom through usb.. that should get you up and running and you can then run sspl and flash your spl
Da_G said:
If you're at the tricolor screen and it reads serial, that should be fine.. plug in usb and it should switch to usb.. then flash a stock carrier rom through usb.. that should get you up and running and you can then run sspl and flash your spl
Click to expand...
Click to collapse
Keep in mind im currently on stock SPL, do u think flashing the stock ROM is ok?
That's exactly why i suggested stock ROM, stock SPL will only accept stock ROM's (it will overwrite the spl too so make sure the stock rom you are using is the right one)
dude....i hate to say this...butyou might be s.o.l. at this point. i did the same to my fuze not too long ago... tryingto flash anything to the phone just locks it up.i was lucky enough to bs my way through an att guy to get me a new one (was still under the 30 day warranty).
Da_G said:
That's exactly why i suggested stock ROM, stock SPL will only accept stock ROM's (it will overwrite the spl too so make sure the stock rom you are using is the right one)
Click to expand...
Click to collapse
That's wt Im trying now, tried to flash 2 ROMs already and stops at 2% saying Invalid Vendor ID
I gess I'm using wrong shipped roms till now
fireblade63 said:
That's wt Im trying now, tried to flash 2 ROMs already and stops at 2% saying Invalid Vendor ID
I gess I'm using wrong shipped roms till now
Click to expand...
Click to collapse
I had the same problem as you and could not flash any rom, Always get Invalid vendor ID.
You need the right Stock Rom to flash and in my case in the middleeast, the Stock Rom is so far only available in at HTC.
I had to take the phone to HTC Service Center and they flashed the correct Stock Rom and charged me as they did it out of warranty.
Regards
fireblade63 said:
That's wt Im trying now, tried to flash 2 ROMs already and stops at 2% saying Invalid Vendor ID
I gess I'm using wrong shipped roms till now
Click to expand...
Click to collapse
Sorry about my last post... I misread your issue.
If you flashed the stock 1.90 SPL from the HardSPL thread, then you will need to ask Olipro (or cmonex) which WWE ROM it originated from. That ROM is the ONLY one your phone will accept.
The steps in reverting SPL for warranty / return state to always do the ROM first so that you do not run into this problem. I had the same issue when I was testing a US 3G Diamond I bought from Best Buy (to become acclimated to TF3D prior to the Fuze's release). I restored the SPL first, and then couldn't get Dutty's ROM off the phone, because I could not locate a downloadable version of the WWE ROM that phone came with. [Luckily, Best Buy Mobile's employees in KOP, PA aren't too clever, and I was able to convince them that the phone came that way. ]
NotATreoFan said:
Sorry about my last post... I misread your issue.
If you flashed the stock 1.90 SPL from the HardSPL thread, then you will need to ask Olipro (or cmonex) which WWE ROM it originated from. That ROM is the ONLY one your phone will accept.
The steps in reverting SPL for warranty / return state to always do the ROM first so that you do not run into this problem. I had the same issue when I was testing a US 3G Diamond I bought from Best Buy (to become acclimated to TF3D prior to the Fuze's release). I restored the SPL first, and then couldn't get Dutty's ROM off the phone, because I could not locate a downloadable version of the WWE ROM that phone came with. [Luckily, Best Buy Mobile's employees in KOP, PA aren't too clever, and I was able to convince them that the phone came that way. ]
Click to expand...
Click to collapse
Hmm, then I need to know from which ROM the SPL originated and then flash it.
Thing is, some of the shipped roms available at wiki are just nbh files..
I tried flashing with the wrapper exe and the RaphaelCustomRUU.exe and still all roms I've downloaded don't seem to work.
It's a RAPH100 untied to a network.
fireblade63 said:
Hmm, then I need to know from which ROM the SPL originated and then flash it.
Thing is, some of the shipped roms available at wiki are just nbh files..
I tried flashing with the wrapper exe and the RaphaelCustomRUU.exe and still all roms I've downloaded don't seem to work.
It's a RAPH100 untied to a network.
Click to expand...
Click to collapse
Post in the HardSPL thread asking which ROM the SPL originated from. Once you know that, you can download the appropriate ROM from the Wiki.
NotATreoFan said:
Sorry about my last post... I misread your issue.
If you flashed the stock 1.90 SPL from the HardSPL thread, then you will need to ask Olipro (or cmonex) which WWE ROM it originated from. That ROM is the ONLY one your phone will accept.
The steps in reverting SPL for warranty / return state to always do the ROM first so that you do not run into this problem. I had the same issue when I was testing a US 3G Diamond I bought from Best Buy (to become acclimated to TF3D prior to the Fuze's release). I restored the SPL first, and then couldn't get Dutty's ROM off the phone, because I could not locate a downloadable version of the WWE ROM that phone came with. [Luckily, Best Buy Mobile's employees in KOP, PA aren't too clever, and I was able to convince them that the phone came that way. ]
Click to expand...
Click to collapse
SPL has nothing to do with the Invalid Vendor ID Error, It is the CID. In another word you can flash SPL 1.95 and still can not flash the AT Rom 1.95.502.5 because the CID is different.
Regards
ViperBJK's QMAT features GoldCard generator for current HTC devices that can force RUU to bypass CID check.
Do you know what is the CID of your device?
shafez said:
SPL has nothing to do with the Invalid Vendor ID Error, It is the CID. In another word you can flash SPL 1.95 and still can not flash the AT Rom 1.95.502.5 because the CID is different.
Regards
Click to expand...
Click to collapse
The CID is determind by the SPL.
Look up the error code posted... everything points to HardSPL. Back in my Wizard days, HardSPL did not exist, and we just did a CID unlocking. This is not the case with newer devices.
All ROMs are not created equal. Each WWE ROM checks for specific information within the SPL, and if it doesn't find what it's expecting, fail...
stepw said:
ViperBJK's QMAT features GoldCard generator for current HTC devices that can force RUU to bypass CID check.
Do you know what is the CID of your device?
Click to expand...
Click to collapse
I'm not sure
Where can I know that?
@NotATreoFan && Shafez,
I remember from TyTNII day when Shafez suggested extracting 3.29 and 28 SPLs from the newer shipped 6.1's for a better responsive device.
We could extract and build with htc rom tool if I remember the name of the tool correctly.
Do we have a tool as such compatible with TP? (agreeing with NotATreoFan here)
@Shafez,
Since you think it is not SPL and it is a CID issue, what can I do about it?
Sending it to SVC for repair out of warranty is an option but I'd like to leave it as my last.
Did they provide the ROM or they flashed it for you?
Were u able to make raw files out of it for future use or any1 else has it?
Thx guys and keep the help coming
fireblade63 said:
@NotATreoFan && Shafez,
I remember from TyTNII day when Shafez suggested extracting 3.29 and 28 SPLs from the newer shipped 6.1's for a better responsive device.
We could extract and build with htc rom tool if I remember the name of the tool correctly.
Do we have a tool as such compatible with TP? (agreeing with NotATreoFan here)
@Shafez,
Since you think it is not SPL and it is a CID issue, what can I do about it?
Sending it to SVC for repair out of warranty is an option but I'd like to leave it as my last.
Did they provide the ROM or they flashed it for you?
Were u able to make raw files out of it for future use or any1 else has it?
Thx guys and keep the help coming
Click to expand...
Click to collapse
Since you cannot get past the bootloader, your only option is to find the WWE ROM that matches the SPL you flashed. Even though the HTC ROM Tool "signs" the NBH file, it still won't fool the stock bootloader... if it did, we wouldn't need HardSPL.
I've done a search and I can't find anything for mine.
mine is an HTC HD2 UK/EU 02.
I have flashed HARDSPL, RADIO and ROM, also put android on it.
But I don't like it, so I want it all back to stock.
Any help please?
smerf1 said:
I've done a search and I can't find anything for mine.
mine is an HTC HD2 UK/EU 02.
I have flashed HARDSPL, RADIO and ROM, also put android on it.
But I don't like it, so I want it all back to stock.
Any help please?
Click to expand...
Click to collapse
android doesn't matter.
to return WM to stock either:
1- flash original rom from sd card (will replace hspl, radio and rom) or
via usb (in this order, more or less-- 2c at the end for sure):
2a- flash original radio
2b- flash original rom
2c- use hspl to put spl back on your device
cheers.
jsmccabe78 said:
android doesn't matter.
to return WM to stock either:
1- flash original rom from sd card (will replace hspl, radio and rom) or
via usb (in this order, more or less-- 2c at the end for sure):
2a- flash original radio
2b- flash original rom
2c- use hspl to put spl back on your device
cheers.
Click to expand...
Click to collapse
Thank you for replying.
But I don't know which stock ROM to download?
I have found one which flashes HSPL, RADIO and ROM, but it is asking If I would like to download the unbranded version or others.
If I do it your way (number1) that's all I need to do, and It will be all back to stock?
smerf1 said:
...If I do it your way (number1) that's all I need to do, and It will be all back to stock?
Click to expand...
Click to collapse
you're welcome and yep, it will bring it all back to stock (i mean, the rom you are going to flash has all the stock stuff- rom and radio- in it so that is what will be on your phone and flashing from the sdcard removes hspl- so all stock!)
jsmccabe78 said:
you're welcome and yep, it will bring it all back to stock (i mean, the rom you are going to flash has all the stock stuff- rom and radio- in it so that is what will be on your phone and flashing from the sdcard removes hspl- so all stock!)
Click to expand...
Click to collapse
Thank you for clearing that up for me.
Any Idea which ROM I will have to use, as I'm sure you can't just use any right?
smerf1 said:
Thank you for clearing that up for me.
Any Idea which ROM I will have to use, as I'm sure you can't just use any right?
Click to expand...
Click to collapse
I used to have the same question =)
"How the hell do I get it back to factory settings?!"
I actually just downloaded the stock ROM from t-mobile. Here's the website for the U.S.A. Hd2:
dl.htc.com/ruudownload/t-mobileUS/DeviceDownloads.aspx?pid=leo
Once you download the stock rom you merely plug you phone up to your computer and click on the rom file to go through the steps.
Hope this helps
ap3604 said:
I used to have the same question =)
"How the help do I get it back to factory settings?!"
I actually just downloaded the stock ROM from t-mobile. Here's the website for the U.S.A. Hd2:
dl.htc.com/ruudownload/t-mobileUS/DeviceDownloads.aspx?pid=leo
Once you download the stock rom you merely plug you phone up to your computer and click on the rom file to go through the steps.
Hope this helps
Click to expand...
Click to collapse
Thank you for that
I am from the UK though with an 02 HTC HD2 (Think unbranded as it doesn't say anything on the front except for HTC, unlike the T-mobile one)
I need to send mine back to tmobile and I've reflashed the software and put back on spl. But, will the tmo techs think it's weird when my spl is 2.08 when stock I believe is 2.10 for the upgraded 2.13 rom?
I've tried what people say about renaming the nbh file but my phone doesn't want to flash through the sd card.
So I can just flash any ROM then?
As you have HSPL installed: through USB you can flash almost any ROM (not TMOUS ones)
But if you really want to go to stock:
Download your ROM from HTC Support site
For O2 you will need a branded rom by the looks of it. (This one)
Just try to download, fill in your devices Serial number, it will tell you wether this Rom is Ok or not.
If you need another then search for it....
BTW: Apply HTC hotfixes released after ROM release date, these are not incorporated in the rom you downloaded....
Flash from SD card to completely revert to stock.
smerf1 said:
So I can just flash any ROM then?
Click to expand...
Click to collapse
No, go to the 'Leo official roms' thread, first post, first link, 1.72 folder, look for the rom
RUU_Le2_UK_1.72.206.3_Radio_CRC_Signed_15.32.50 .07U_2.07.51.22_2_Ship.exe
see how it says O2 and UK in the name?
Get that, flash it from USB, then run HSPL2 and choose 1.66.0000
SD card flashing is soooo old fashioned, hehe.
Done, all stock.
here is the thing from the start.
a friend of mine bought a HD2 from hong-kong.
after installing a cab file for hebrew support the device wont go up.
hard reset to the device didnt help.
so i thought i should hspl the device and then flash the new nrg rom.
after i did hspl from version 1.66 i made a ROM FLASH BEFORE RADIO FLASH.
anyways the NRG system refused to go up then i made radio upadte and tried flash again to NRG rom but the flash keep stucking in the middle every time.
i got stucked with the error cable code in bootloader menu.
flashed from sd the newest ROM 3.14.405.2 still nothing changed still with error and now without the HSPL.
is there anything else i missed?
JUST TRIED TASK29..afte 4% stopped with messege not allowed
Welcome to the dark side,I did the same thing,I followed someones advice and flashed the official 3.14 from the SD card,now I am stuck at the bootloader with SPL 3.03.
Lots of peaople here have become bummers asking for a new HSPL but the smart guys seem to be turning a deaf ear.
try to flash earlier official rom e.g 1.66 rom not from sd card but with the pc
hagba said:
Welcome to the dark side,I did the same thing,I followed someones advice and flashed the official 3.14 from the SD card,now I am stuck at the bootloader with SPL 3.03.
Lots of peaople here have become bummers asking for a new HSPL but the smart guys seem to be turning a deaf ear.
Click to expand...
Click to collapse
Holy h*t...
Are you freaking crazy?
You MUST NOT flash a original ROM from SD card... That will overwrite the hardspl...
If you guys follow the RTFM tradition before do something you don't understand, then that would not happen...
Now you have to wait until a new hardspl is released...
Maybe you should do a task 28/29 and flash 3.14 with RUU.
Before you guys do another stupid thing... Don't try a "task 2a".
Maybe it don't brick your device, but it also will not help.
coneman23 said:
here is the thing from the start.
a friend of mine bought a HD2 from hong-kong.
after installing a cab file for hebrew support the device wont go up.
hard reset to the device didnt help.
so i thought i should hspl the device and then flash the new nrg rom.
after i did hspl from version 1.66 i made a ROM FLASH BEFORE RADIO FLASH.
anyways the NRG system refused to go up then i made radio upadte and tried flash again to NRG rom but the flash keep stucking in the middle every time.
i got stucked with the error cable code in bootloader menu.
flashed from sd the newest ROM 3.14.405.2 still nothing changed still with error and now without the HSPL.
is there anything else i missed?
Click to expand...
Click to collapse
maybe try SSPL
Hi
ive had similar problem (stuck with hspl 3.03) and flashing official leoimg from sd card worked for me so it is worth trying.
Regards
artiik said:
Hi
ive had similar problem (stuck with hspl 3.03) and flashing official leoimg from sd card worked for me so it is worth trying.
Regards
Click to expand...
Click to collapse
Why you freaking guys flash an official ROM from SD-Card?
tired that all
i couldnt get offical flash..
keep getting not allowed messege on the screen.
the thing is that the 3.03 update wasnt successul either and stopped at 44%
coneman23 said:
i couldnt get offical flash..
keep getting not allowed messege on the screen.
the thing is that the 3.03 update wasnt successul either and stopped at 44%
Click to expand...
Click to collapse
Did you try to flash the HD2 with 3.14 ROM (with the RUU)?
Crusoe86 said:
Did you try to flash the HD2 with 3.14 ROM (with the RUU)?
Click to expand...
Click to collapse
yes i have from sd and from usb..getting 28002 not allowed.
tried mtty42.1 task 29 and task 28 55aa
still no hope.
What should task 55aa do? In my opinin it should flash everthing except the radio. Right?
What kind of HD2 sells HK? Is it an ordinary 512MB one?
Is this an original HTC? I know the chinese people does not like originals, they like to sell their own not working but nearly original looking phones...
Look at this Touch Diamond
What happens if you install the latest HSPL (2.08)?
Is it possible to flash a new SPL (does not matter if original or not)
What kind of Radio do you have actual on your Phone?
Many regards
Crusoe86 said:
What should task 55aa do? In my opinin it should flash everthing except the radio. Right?
What kind of HD2 sells HK? Is it an ordinary 512MB one?
Is this an original HTC? I know the chinese people does not like originals, they like to sell their own not working but nearly original looking phones...
Look at this Touch Diamond
What happens if you install the latest HSPL (2.08)?
Is it possible to flash a new SPL (does not matter if original or not)
What kind of Radio do you have actual on your Phone?
Many regards
Click to expand...
Click to collapse
it is the orginal,he bought the phone with the wwe_asia 1.66 rom with english and chinese.
as i said tried to flash to 1.66 and again with new 3.16. but still getting not allowed.
task 28 55aa should format the device but some say its working only in case of hspl.
and since my phonw now got the 3.03 spl i guess its not possible.
correct me if im wrong but my only optios seems to be jtag which cost here in some labs about 150$...
Oh my god... What shoudl I do with you?...
I don't want to brick my HD2 to try something for you...
But... Did you know something about a "Goldcard" method?
If not I will help you to create one. On other phones the Goldcard allows to flash ROMs from another Provider... For example you have a Vodafone ROM and want a Stock HTC ROM... Normally this should not work. With a Goldcard it does...
Maybe you have an old microSD Card which we can use?!
Maybe we can also try to flash it with SSPL. Did you try this, too?
I never used SSPL, maybe it did not work in Bootloder mode, but we will se this when we try it
That's really nice help, from you Crusoe86.
PINki92 said:
That's really nice help, from you Crusoe86.
Click to expand...
Click to collapse
I hope it will help the author...
I know how it feel when the own phone is broken.
My first HD2 was overrun by a car... And it takes me 5 month to repair it, because I can't get a keypad ribbon...
And my second HD2 is not really broken... My girlfriend loaned it two weeks ago for one week. She still has is, because she like the Android OS on it and until now she won't give it back to me. Now I have to wait until my Desire HD arrives me
What should I say... Women...
But... PPP works very well for her operator (BASE) on Android, I've interruptions every 5 minutes and I can be lucky if I can reconnect after each disconnect
Back to topic...
@coneman23:
I'll hope you've flashed a 2.**.50 radio (for e.g. 2.12.50) not a 2.**.51.
I've noticed, that those radios do not work with some ROMs.
Crusoe86 redirected me here.
is there actually a way to fix this?
maybe with goldcard and official 1.48 rom?
Here I am...
You could try HSPL3 to revert back to an older SPL. Maybe that works...
And you can try older Stock ROMs like the 1.48 (from SD card (I use an old one when I flash my HD2, maybe thats is more compatible like newer SDHC cards)).
Andhopefully it replaces the new SPL.
But I would try the Goldcard method or try to boot SSPL from bootloader mode...
My girlfriend has my HD2 actually. I can't try anything
Crusoe86 said:
Here I am...
You could try HSPL3 to revert back to an older SPL. Maybe that works...
And you can try older Stock ROMs like the 1.48 (from SD card (I use an old one when I flash my HD2, maybe thats is more compatible like newer SDHC cards)).
Andhopefully it replaces the new SPL.
But I would try the Goldcard method or try to boot SSPL from bootloader mode...
My girlfriend has my HD2 actually. I can't try anything
Click to expand...
Click to collapse
I dont know how to make a goldcard, so i cant make one.
I recommend that you try this (found in your thread).
If that does not work, we can make a Goldcard.
It is not very difficult, but this solution in your thread seems to be easier if it works.
I was trying to flash the stock rom from the sd card in order to get rid of the hspl but I flashed it with the wrong rom and now my phone will not get past the 4 color screen. I tried to flash with the stock tmobile rom but I keep getting error. When I try to flash with the sd with the tmobile RUU it will say "loading..." and does nothing. I tried to run the exe file with windows and I will get errors everytime. Did I brick my phone?
I have a Tmobile US HD2 phone and without knowing better, I flashed it the first time with:
RUU_Leo_S_HTC_WWE_3.14.405.2_Radio_15.42.50.11U_2.15.50.14_LEO_S_Ship.exe
What can I do now?
can you get into bootloader?
if so, what does it say?
jsmccabe78 said:
can you get into bootloader?
if so, what does it say?
Click to expand...
Click to collapse
Is the bootloader the red/green/blue/white screen? If so, yes I see that screen and it saids "Upgrade ROM code error Please try again"
I have tried to flash again and again from the SD card and when I flash with the official Tmous ROM, it will get stuck at the installing screen and does nothing. If I try to restore with windows using the exe file, it will look like its doing something but will error out after a few minutes staying at 0%.
Also right now it shows
PB91120 SS-B3
SPL-3.03.000 XE
MicroP(LED) 0x05
MicroP(Touch) 0x50
Do you mean that you have a T-Mous Usa device, the one with red and green buttoned? and 1GB of memory?
kurt-willems said:
Do you mean that you have a T-Mous Usa device, the one with red and green buttoned? and 1GB of memory?
Click to expand...
Click to collapse
Yes, and I tried flashing with the WWE version without knowing better
Is my phone bricked? And is it out of warrantee now?
vwrado said:
Yes, and I tried flashing with the WWE version without knowing better
Is my phone bricked? And is it out of warrantee now?
Click to expand...
Click to collapse
Good question, I have sean lot of users installing a wrong ROM, but on the correct device.
the HD2 T-Mous device isn't the same as the european device.
But I'm not sure at 100% you can save it.(lucky the new 3.14 european stock rom have the same radio if not it was total stuck.)
but now how to restore
I mean you have already try to flash (the correct on) over SD and it didn't works.
can you tell witch error you get when you was trying to flash the correct stock ROM over SD or by your PC?
vwrado said:
Is the bootloader the red/green/blue/white screen? If so, yes I see that screen and it saids "Upgrade ROM code error Please try again"
I have tried to flash again and again from the SD card and when I flash with the official Tmous ROM, it will get stuck at the installing screen and does nothing. If I try to restore with windows using the exe file, it will look like its doing something but will error out after a few minutes staying at 0%.
Also right now it shows
PB91120 SS-B3
SPL-3.03.000 XE
MicroP(LED) 0x05
MicroP(Touch) 0x50
Click to expand...
Click to collapse
I may be wrong, however, if you're still having a problem you may need to reinstall MAGLDR again after a failed sd card flash.
kurt-willems said:
Good question, I have sean lot of users installing a wrong ROM, but on the correct device.
the HD2 T-Mous device isn't the same as the european device.
But I'm not sure at 100% you can save it.(lucky the new 3.14 european stock rom have the same radio if not it was total stuck.)
but now how to restore
I mean you have already try to flash (the correct on) over SD and it didn't works.
can you tell witch error you get when you was trying to flash the correct stock ROM over SD or by your PC?
Click to expand...
Click to collapse
When trying to flash the correct ROM over SD it will just have the plain white screen with "installing..." on the top and it does nothing. I left it alone for an hour and nothing happens.
When trying to flash with the exe on my computer, I will go through all the process and click next, next next, then it tries to update the rom (on the phone it shows the black HTC screen with the status bar) and it stays at that screen at 0% and after a few minutes it will show update failed on the pc while the phone still shows the status bar at 0%. The PC shows Error 262: update error, The rom update utility encountered communication errors during the update process.
ElaineD said:
I may be wrong, however, if you're still having a problem you may need to reinstall MAGLDR again after a failed sd card flash.
Click to expand...
Click to collapse
Just tried MAGLDR and it shows the same problem as if I was trying to flash the correct ROM.
vwrado said:
When trying to flash the correct ROM over SD it will just have the plain white screen with "installing..." on the top and it does nothing. I left it alone for an hour and nothing happens.
When trying to flash with the exe on my computer, I will go through all the process and click next, next next, then it tries to update the rom (on the phone it shows the black HTC screen with the status bar) and it stays at that screen at 0% and after a few minutes it will show update failed on the pc while the phone still shows the status bar at 0%. The PC shows Error 262: update error, The rom update utility encountered communication errors during the update process.
Just tried MAGLDR and it shows the same problem as if I was trying to flash the correct ROM.
Click to expand...
Click to collapse
Have you tried a Gold Card method?
silverwind said:
Have you tried a Gold Card method?
Click to expand...
Click to collapse
What is the gold card method?
Would it be safe to just send my device as it is now? All that it saids when I boot it up is SPL 3.03 in the bootloader screen. Would that make it out of warrantee if I flashed the wrong rom?
i think so as the hspl is off your phone. out of ideas otherwise, ya know? what can it hurt (assuming kurt, etc. don't have ideas)?
question will be if they can see the rom, etc. but even then it still is official, just not right.
jsmccabe78 said:
i think so as the hspl is off your phone. out of ideas otherwise, ya know? what can it hurt (assuming kurt, etc. don't have ideas)?
question will be if they can see the rom, etc. but even then it still is official, just not right.
Click to expand...
Click to collapse
I called and asked about it today and they said it is out of warranty if I flashed it with the wrong official rom
vwrado said:
I called and asked about it today and they said it is out of warranty if I flashed it with the wrong official rom
Click to expand...
Click to collapse
Don't lose hope and be patient. There are a LOT of people much smarter than me here. It's just that they're preoccupied right now doing a much need reorganization of the XDA site. Keep reading and give the smart guys a chance to help you by continuing to post any additional info you can gleen from your phone problem.
Hmm, it isn't looking good.
If you only have flashed a wrong radio, well it wasn't so obvious for HTC to see what have caused the problem so there was 50% chance that the warranty worked. (but you may never say them that you have flashed, if not thy will suspect a wrong manipulation of the user.)
But beside that you have flashed the stock ROM form a other device. the problem is the SPL => 3.03 this isn't for your device.
SPL are like Secondary Program Loader. Think of this in the same sense as bios on a pc. (it sets where your system boots from, intialises sub system process etc)
so this is a bigger problem.
And when you will send your device to HTC repair center thy will see directly the wrong spl; so no warranty.
I'm sorry to say, but personally I don't see a solution.
vwrado said:
I was trying to flash the stock rom from the sd card in order to get rid of the hspl but I flashed it with the wrong rom and now my phone will not get past the 4 color screen. I tried to flash with the stock tmobile rom but I keep getting error. When I try to flash with the sd with the tmobile RUU it will say "loading..." and does nothing. I tried to run the exe file with windows and I will get errors everytime. Did I brick my phone?
I have a Tmobile US HD2 phone and without knowing better, I flashed it the first time with:
RUU_Leo_S_HTC_WWE_3.14.405.2_Radio_15.42.50.11U_2.15.50.14_LEO_S_Ship.exe
What can I do now?
Click to expand...
Click to collapse
Look up post #13 on this thread, similar problem:
http://forum.xda-developers.com/showthread.php?t=903641
stevedebi said:
Look up post #13 on this thread, similar problem:
http://forum.xda-developers.com/showthread.php?t=903641
Click to expand...
Click to collapse
Very optimistic, but he have install the latest EU/Asian stock ROM on his T-Mous device.
Installing these latest stock ROM install the spl 3.03 (who isn't the same/compatible) this brakes his device.
kurt-willems said:
Very optimistic, but he have install the latest EU/Asian stock ROM on his T-Mous device.
Installing these latest stock ROM install the spl 3.03 (who isn't the same/compatible) this brakes his device.
Click to expand...
Click to collapse
I'm assuming that he would know to install a TMOUS stock ROM, not a foreign version. My point was that it was possible to recover by installing a stock ROM.
stevedebi said:
I'm assuming that he would know to install a TMOUS stock ROM, not a foreign version. My point was that it was possible to recover by installing a stock ROM.
Click to expand...
Click to collapse
I know what you mean. but when he have installed the foreign stock ROM version, it have install a incompatible/wrong spl version, this brakes the device.
kurt-willems said:
I know what you mean. but when he have installed the foreign stock ROM version, it have install a incompatible/wrong spl version, this brakes the device.
Click to expand...
Click to collapse
Well, the other thread had the OP listing the exact same message, and she had also accidentally installed the wrong SPL. I just thought it deserved a look.
I've searched about trying to fix this on my own, but i have a feeling i may have caused more of a problem.
so trying to move back from android with a HSPL, i managed to install the original rom, but couldn't get rid of the CotullaHSPL when i flashed the new via USB.
so i looked for a Radio fix and ended up using the RUU_SIGNED.nbh radio from the same pack i used to install the rom
RUU_Leo_HTC_WWE_1.48.405.2_Radio_Signed_15.28.50.07U_2.05.51.05_2_Ship
Radio i am on now is the SPL-3.03.000 XE.
So after i installed it it says "software update failed, please try again."
attempted to try boot and keeps saying the same thing. Went into MAGDLR to try and reinstall the same Radio again after a soft reset and it comes up with 00028002 with NOT ALLOWED underneath this error number.
i attempted to reinstall is the rom, but not it just keeps stopping and telling me i cannot.
Any help on this would be amazing, not sure whether i should try a task28/29 or whether there is a simple fix to this problem.
i didn't install the rom off the SD card, but i did install the Radio off the SD card.
it needs to go back to the original rom so i can claim warranty because of the touchscreen!
Thanks guys and i hope this was enough detail for someone to step in and help me and maybe someone else at the same time!
Drummerman44 said:
I've searched about trying to fix this on my own, but i have a feeling i may have caused more of a problem.
so trying to move back from android with a HSPL, i managed to install the original rom, but couldn't get rid of the CotullaHSPL when i flashed the new via USB.
Click to expand...
Click to collapse
hspl thread, post 1, hspl can only be removed by flashing stock rom from SD card or by using the hspl.exe utility.
so i looked for a Radio fix and ended up using the RUU_SIGNED.nbh radio from the same pack i used to install the rom
RUU_Leo_HTC_WWE_1.48.405.2_Radio_Signed_15.28.50.07U_2.05.51.05_2_Ship
Click to expand...
Click to collapse
that's the whole rom radio and spl, not just a radio. It will have flashed the radio when you did the USB flash.
Radio i am on now is the SPL-3.03.000 XE.
Click to expand...
Click to collapse
that's not a radio, that's spl 3.03.0000 which goes with 3.14 roms.
So after i installed it it says "software update failed, please try again."
Click to expand...
Click to collapse
the leoimg.nbh you mentioned can't be from the rom you posted. I'm gonna assume (because the outcome would be what you have now) that you flashed a stock 3.14 rom from SD, and step 1 is hspl being replaced by the stock spl for that rom, , in this case 3.03.0000,, then the phone reboots to start the flash, but because hspl has gone only the stock roms that match your phone will work, hence getting flash failed.
attempted to try boot and keeps saying the same thing. Went into MAGDLR
Click to expand...
Click to collapse
can't flash from magldr, I assume you mean bootloader,, coloured stripey screen.
to try and reinstall the same Radio again after a soft reset and it comes up with 00028002 with NOT ALLOWED underneath this error number. i attempted to reinstall is the rom, but not it just keeps stopping and telling me i cannot.
Click to expand...
Click to collapse
because its the wrong rom and there's no hspl to bypass the check.
Any help on this would be amazing, not sure whether i should try a task28/29 or
Click to expand...
Click to collapse
whether there is a simple fix to this problem.
Click to expand...
Click to collapse
yes, get correct stock rom, flash it from SD, done.
i didn't install the rom off the SD card, but i did install the Radio off the SD card.
it needs to go back to the original rom so i can claim warranty because of the touchscreen!
Thanks guys and i hope this was enough detail for someone to step in and help me and maybe someone else at the same time!
Click to expand...
Click to collapse
Correct stock rom. Must match country and provider, example mines from o2 UK, so only o2 UK stock roms can be used.
The rom you posted the name of, see it says "HTC wwe" well the HTC bit means it's unbranded,example bought from carphone warehouse. If your phone came from o2, it would say o2 wwe
Oh and forget about the radio, it comes with the rom.
Bit off topic but once I've flashed MAGDLR can I ever go back to stock WinMO 6.5. I f'ed up and didn't SIM unlock my phone before I started hacking it up ( Hard SPL & MAGDLR)
nicknowsky said:
Bit off topic but once I've flashed MAGDLR can I ever go back to stock WinMO 6.5. I f'ed up and didn't SIM unlock my phone before I started hacking it up ( Hard SPL & MAGDLR)
Click to expand...
Click to collapse
flash stock rom. magldr gone.
samsamuel said:
flash stock rom. magldr gone.
Click to expand...
Click to collapse
figured that would be the course of action. Any particular stock TMOUS firmware I should flash.
Boy I sold my first HD2 about this time last year, just got a new one yesterday. And I gotta say WOW, this device has just gone crazy DEVn since the last time i owned it. Crazy things.
Doesn't matter, 2.10, 2.13 and 3.14 are the release versions.
samsamuel said:
Doesn't matter, 2.10, 2.13 and 3.14 are the release versions.
Click to expand...
Click to collapse
Perfect! thank you buddy.