first of all... the info of my cellphone:
Rom version 2.25.11.1.wwe
Rom Date: 5/11/06
Radio VErsion 02.25.11
Protocol version 4.1.13.12
ExtROM version 2.25.11.102
i already got my cingular 8125 and i need to sim unlock and i tried whit lokikiz 0.3a and 0.3, i already installed on the pocket pc the enablerapi.cab, and then when i execute lokiwizmsl on my computer its giving me this..
machinagod's HTC Wizard/Prophet/Charmer MSL Revealer v0.3
NOW WITHOUT CID Unlocking POWER!
ECHO está desactivado.
Supports SPL 2.x!!
--------------------
WARNING: This tool is highly experimental!
I will NOT be held responsible for any problems caused by this tool.
--------------------
Thanks to xda-developers, spv-developers, and especially itsme by the work they
released. This solution would not be possible without them.
--------------------
Unlocking RAPI Please wait...
MachinaGod RapiUnlocker v1.0
InitializingEl sistema no puede hallar la ruta especificada.
.El sistema no puede hallar la ruta especificada.
.El sistema no puede hallar la ruta especificada. (this is: the system can not find the especified route)
...........El sistema no puede hallar la ruta especificada.
..........Done!
RAPI Unlocked.
Starting MSL work... DO NOT DISCONNECT UNTIL THIS SCRIPT ENDS
ECHO está desactivado.
El sistema no puede hallar la ruta especificada.
ECHO está desactivado.
ECHO está desactivado.
SIMLock Code is your code... Type it with another SIM in...
--------------------
El sistema no puede hallar la ruta especificada.
--------------------
"Standing on the shoulder of giants"
Ricardo Afonso, 2005
Press Any key to Exit.
i already block the antivirus, i have nod32, and i unistalled this, and its still not working! what i have to do??? please i really need a hand, im from colombia, and my phone get to my hands today and i cant use it as a phone here because of the sim lock... please help me!
i tried with my oroginal active sinc 4.1 and it doesnt work, i tried wht 4.5 and doesnt work... what could be the problem? im doing all fine-... i also disactivated the windows firewall
You may need a sim from the original carrier. After running lokiwiz, then you should insert the new sim and enter the unlock code in the box that shows up on startup.
If you are getting empty unlock code, chances are your phone is already unlocked. Have you tried using SIM of your original telco provider to make sure that the IMEI of your phone is not blacklisted in your country?
Anyway, if you are VERY sure that your phone is SIM-locked, you can try getting the latest version of lokiwiz0.3b/c.
For those NOT Latin i must tell you that the Spanish error messages say that the program wasn't able to find the path to the required file thus not bothering to calculate the code
Lokiwiz interface is a 'simple' batch file that does no error checking
@jeanmichel6
better go through the lokiwiz thread and see how others have solved it (i don't feel like doing it myself )
cheers
mestrini said:
For those NOT Latin i must tell you that the Spanish error messages say that the program wasn't able to find the path to the required file thus not bothering to calculate the code
Lokiwiz interface is a 'simple' batch file that does no error checking
@jeanmichel6
better go through the lokiwiz thread and see how others have solved it (i don't feel like doing it myself )
cheers
Click to expand...
Click to collapse
o, sho this happens because i have my XP in spanish? maybe thats why it isnt finding the route to the cellphone... can you give me some link of a user who solved this problem? or im the only one in the world whit this kind of problem...
let me say to everyone that i havent sleep trying to fix this...
so i apreciate your answers, and let me thank you, i will try to reinstall my XP in english... or what should i do?
and i have the sim from the original carrer (cingular) I HAVE EVERYTHING and it doesnt work
jeanmichel6 said:
o, sho this happens because i have my XP in spanish? maybe thats why it isnt finding the route to the cellphone... can you give me some link of a user who solved this problem? or im the only one in the world whit this kind of problem...
let me say to everyone that i havent sleep trying to fix this...
so i apreciate your answers, and let me thank you, i will try to reinstall my XP in english... or what should i do?
and i have the sim from the original carrer (cingular) I HAVE EVERYTHING and it doesnt work
Click to expand...
Click to collapse
No. it's not because your XP is in spanish, it's because you probably didn't unpack all the files or you use a folder with spaces in the name.
Check those two before installing new OS
mestrini said:
No. it's not because your XP is in spanish, it's because you probably didn't unpack all the files or you use a folder with spaces in the name.
Check those two before installing new OS
Click to expand...
Click to collapse
ok... i tried that... i extract alll the files to my hard drive C, then put again the enable rapi in the phone, and run lokiwisMSL, and is still giving me the same message... i don know what to do... does the zip file comes whit other folders in in? because i descompress everythin and all the files came to c, whitout any folder... i readed that it came a utils folder... but it doesnt appear... i dont kno what to do... i use C because its a folder with no spaces.. please help me..., im also trying active sync 4.5 in english version... and nothing...
can some one give me the files who worket to sim unlock a g4 device??? please help me... i tried everything... im about to trow this cellphone to the floor because it isnt working as a cellphone and i really need of this function... please help me...
ok!!! love you guys! finally it work!!! thanks for everything...
the problem was with the winzip... id doesnt extract me the files organized in folders... so i unzipped with winrar and the appear the folder utils... and everything worked fine!!! so the problem was with winzip 8.1, im really happy, and i really apreciate you guys! thanks for the help!!!
another one bites the dust, yeah yeah...
good job
Related
UPDATE: This tool has been superseded by a newer version. This new tool does not work for Radio version 1.05.12 (see below). The new tool works for 1.05.12A and later. For more information on the new tool see the new thread
==============================================
This is old information. Only use this method for 1.05.12
Despite some set-backs and not precisely the easy tool we want (yet), we didn't want to hold this back.
We are proud to present the new unlock tool for the XDA II!
One of the prerequisites for using this tool is puting the XDA II in bootloader mode.
Unfortunately this will also mean a hard reset of the device: you will loose all current data!
So the advice is: MAKE A BACK-UP FIRST! (And test that it works).
Puting the device in bootloader mode requires pressing three buttons at once:
The Power button, the Action button (also called Navigation pad)
and the Reset button in a hole at the bottom with the stylus.
When you run this tool on your PC, it will run in a DOS box and extract the unlock code from the device.
It will probably not work on Windows 98, but it does on Windows 2000 and XP.
This tool was tested with Radio version 1.06.x. It might not work on Radio version 1.10.x!
It won't unlock the device for you. You can do it through the standard interface.
When you run it, it looks like this:
Code:
XDA Developers XDA2UNLOCK tool
This program will extract the unlock code from your XDA II.
For this to be possible, a few steps are necessary:
1. The XDA II needs to be put in bootloader mode.
NOTE: THIS WILL WIPE ALL YOUR DATA SO FIRST BACK-UP!
You enter the bootloader by holding the Power button and the Action button
while pressing the stylus in the reset hole on the bottom.
In the bootloader mode, the display will be gray and say Serial at the top.
2. Next put the device in the USB cradle. The display will now say USB
and the first time Windows will detect a new device.
3. Disable USB in Active Sync in 'File -> Connection Settings'
Now the device is ready to extract the unlock code.
Type YES when you have completed the above steps and want to continue: YES
Communication port opened.
waiting for radio bootloader
reading first block...
reading second block...
Unlock code: 2040248
When you insert a blocked SIM in your XDA2,
you can enter the above code in the SIMLock box.
Alternatively, you can connect to the wireless modem
and enter the following AT command:
AT%HTCLOCK=0,2040248,1
Do not forget to enable USB in Active Sync again!
For download, go to http://wiki.xda-developers.com/wiki/xda2unlock
Please write comments, questions, supporting explanations etc in this thread.
:lol: WOW
The bar is stocked up with a few extra barrels of beer for the celebration.
he's the best!
You are really the beast one!
have a bear and many thanks for your greater job.
Last thing would be to making writeable the extended rom, as the last 10 MDAII i had, they're not writeable anymore.
Thanks and ciao.
working on that one. seems to be protected rather good. I suspect that unprotecting it will involve reformatting the partitions. and then reloading them with data.
have a bear and many thanks
Dave
Help ! please , I got a problem , everything runs ok until :"reading second block"... the DOS box disapear !!! no code ....what can I do ????
On the XDA II , I can read on the screen : "xda2unlock"
What can I do , please ? Thanks a lot !
tenzin said:
Help ! please , I got a problem , everything runs ok until :"reading second block"... the DOS box disapear !!! no code ....what can I do ????
Click to expand...
Click to collapse
Woops, my mistake. I added an extra "Press enter" line so it pauses.
You can download the new version from the usual place:
http://xda-developers.com/xda2/xda2unlock.exe
.... i'm new here but i think it's a very good community..
tnx a lot for your brain sharing...
pLu
source available
As a good tradition we also made the source code available at:
http://xda-developers.com/xda2/xda2unlock.zip
WONDERFULL !!! Thanks, thanks, thanks : my xda2 is free !!!
I love you !! :wink: :mrgreen: It's a fantastic Christmas present !...... you're the best ...Cheers !
It worked!
Since O2 charge £15 to do that (and there's no guarentee that they'll do it)... I'm donating it to you!
Thanks a lot guys!
Congrats. You are a great blessing to the tech community. Though I'm in Nigeria and I doubt if I will get an XDAII soon, but now I know whenever it comes unlocking will not be a problem.
God bless and preserve you.
Great: it even works! :wink:
Thanks for giving us Freedom of Provider
I've tested it too
It works fine on my O2 locked XDA2. Brilliant. I take back all I said.
thanks works like a dream!!!
THANK YOU
Mogelijkheid gebruik van MDA i.c.m. andere providers
Heb het unlock-programmaatje even uitgerpobeerd en werkt ook voor de MDA2! Ben dus erggg blij;-)
We hebben de MDA2 op voorraad en kan door ons gratis worden aangeboden i.c.m. een (zakelijk) T-Mobile Optimaal-abonnement!
Dus heb je interesse, just let me know;-)
Grtz,
Sander
Thanks, It ended up being very easy.
Thanks!
:lol:
Excellent guys. Worked like a dream! Many, many thanks.
A Message to SANTA!
WELL You have DONE IT Again!
THANK YOU!
May all your dreams come true!
Mine did! :wink:
Alright I know for alot of you it can get very difficult to decide what will happen to your Wizard if you upgrade it. I am no stranger to it either. I looked and looked and looked...I didn't want to turn my phone into a brick anymore than you do right now. it took some time and question asking. I finally decided to give you what took me a while to find. a way to upgrade your G4 only device and to unlock your phone safely. G4 is a bit more difficult to upgrade since it can brick so easily. I had a G3 as well...I didn't brick it, it got dropped and the screen broke. However, it was alot easier to upgrade than my G4 was. So Here you go. I will post the proper links to help you get your phone safely upgraded and Hard SPL (CID Unlocked) so you can flash your choice of Rom's. Use this if you have never unlocked your phone before or don't know if your phone is unlocked.
WARNING...THIS IS DESIGNED FOR G4 DEVICE WIZARDS ONLY. DO NOT ATTEMPT TO UPGRADE WITH A G3 DEVICE. I WILL NOT BE HELD RESPONSIBLE IF YOU BRICK YOUR DEVICE.
If you follow this line for line...you should not have any problems.
1. go to this link and download the Wizard Service tool.
http://forum.xda-developers.com/showthread.php?t=329170
Install the Wizard Service tool. after you have installed it, with your phone connected to active sync, you will open the wizard service tool and click on the top button "enable rapi + unsigned apps".
now you will click on device info. it will tell you if your device is unlocked and if you have a G4 or not. IF THE WIZARD SERVICE TOOL SHOWS YOU HAVE A G3 DEVICE STOP NOW!!! PROCEEDING FURTHER CAN AND WILL CAUSE UNDO HARM TO YOUR DEVICE.
I recommend disconnecting your active sync connection, deleting your partnership, but DON'T DELETE the favorites folder. this will have your contacts in it and you will be able to retrieve any lost contacts. as well as your favorites folder with internet explorer. Reconnect your phone to usb and when you have the option to form a partnership with active sync, click "Cancel", this will put you on as a guest.
2. Now you will need to download the HardSPL package from Here
Once downloaded, open the program. make sure you have an active sync connection as "Guest". A small box will pop up with one button that says "CHECK DOC" click on that button. It will check your phone again, once it realizes it is a G4 Phone, it will proceed to install a Soft SPL so it can complete a Hard SPL upgrade. (follow the prompts. There will be a DOS based page that will pop up. and as long as your screen turns white on your device, you are ok.) this will take approximately 1 minute. Your phone will automatically reset when it does, your ipl will say 2.21.001 and your spl will say 2.21.Olip. as long as it says that, your phone is CID unlocked.
NOTICE: DO NOT ATTEMPT TO UPGRADE YOUR PHONE'S IPL/SPL TO ANY OTHER THAN THE ABOVE. IT CAN AND WILL DO UNDO HARM TO YOUR DEVICE.
Now for upgrading your Radio. I will give two links to radio's to upgrade with. These Radio's are decent radios and do not have the IPL/SPL with them so they are safe to upgrade to. I will also link a Rom Upgrade Utility (RUU) so you can upgrade the Radio's Safely.
Radio 3.02.11: Link (known to drain Battery Life. You Be the Judge of that)
Radio 2.69.11: Link
RUU: Link This Utility does NOT have ipl/spl just copy your radio Nk.nbf to this RUU and flash.
I hope this will Help you to upgrade your G4 Device. If you have any questions feel free to ask. I will attempt to answer them to the best of my ability.
Thanks to those that have already had alot of this around the forums:
Double_ofour
Cracing
Vippie: for the tutorial on upgrading the wizard.
and to those that set up links to download the roms and radios that are not mentioned.
After I have done all of this, can I upgrade the rom now to Cracings 6.5? I have done it many times on my G3 but was too afraid on my wifes G4 until your tutorial. It still doesnt say cid or supercid unlocked when I run the Wizard tool. But, it does have the same Ipl and Spl that you have in your signature. Does this mean that it is unlocked? Thanks for your reply and tutorial.
TTJB said:
After I have done all of this, can I upgrade the rom now to Cracings 6.5? I have done it many times on my G3 but was too afraid on my wifes G4 until your tutorial. It still doesnt say cid or supercid unlocked when I run the Wizard tool. But, it does have the same Ipl and Spl that you have in your signature. Does this mean that it is unlocked? Thanks for your reply and tutorial.
Click to expand...
Click to collapse
Wizard tool reads the cid block, which isn't changed by the hard-SPL.
The Hard SPL never reads the CID block while updating, but always gives the RUU the response that it is SuperCID due to a patch.
That is why Hard SPL works while updating, but Wizard tool doesn't report SuperCID.
Grab the Hard SPL and full tutorial from this thread
Regards,
EqX
Thanks equinox for your response. It looks like I'm free to upgrade to a different Rom. Quick question. "After upgrading Rom, if I want to upgrade to a different Rom, do I do something else? Or now that my IPL and SPL are hard coded can I just change from Rom to Rom to Rom?" Thanks!
TTJB said:
Thanks equinox for your response. It looks like I'm free to upgrade to a different Rom. Quick question. "After upgrading Rom, if I want to upgrade to a different Rom, do I do something else? Or now that my IPL and SPL are hard coded can I just change from Rom to Rom to Rom?" Thanks!
Click to expand...
Click to collapse
You now can change to ALMOST any ROM.
Make sure that the ROMs don't contain (only) G3 IPL/SPL, as the old TMobile and Old Qtek ROMs did.
Many people who have ignored to read that line have bricked their device due to flashing of a G3 SPL/IPL to a G4..
Regards,
EqX
Thanks Equinoxe for the assist...yes i failed to note that once the work was done that the device could have a G4 safe rom flashed to it. I hope this worked for him because I could not find the info for quite some time. apparently you have done a tutorial and I was unable to locate it. Not trying to step on toes...there are alot of threads on here and it is difficult to locate the correct thread we need. Just wanting to make sure that others don't brick their device...I know i don't
Regards,
jonnyj771 said:
Thanks Equinoxe for the assist...yes i failed to note that once the work was done that the device could have a G4 safe rom flashed to it. I hope this worked for him because I could not find the info for quite some time. apparently you have done a tutorial and I was unable to locate it. Not trying to step on toes...there are alot of threads on here and it is difficult to locate the correct thread we need. Just wanting to make sure that others don't brick their device...I know i don't
Regards,
Click to expand...
Click to collapse
Don't worry, I have fairly small toes, it's hard to step on them
BTW the hard and soft SPL threads are stickied.
Regards,
EqX
I successfully updated radio on my qtek
THANKS .........,
NOW GOOD RANG AND BATTRY,,,,,,NICE WORK DEAR KEEP IT UP
=> Bootloaders:
IPL: 2.21.0001 (G4 device)
SPL: 2.21.Olip (G4 device w/ HardSPL)
Built on Aug 26 2007 at 19:41:34
Copyright (c) 2007 Olipro & HTC - Hard-SPL
=> Firmware:
OS: 5.1.xxx (Build 14955.2.3.0)
ROM: 2.26
Registry AKU: .2.3.0
Radio: 03.02.11
Protocol: 4.1.13.47
HTC Cingular 8125 phone no service
After a changing of OS my HTC is not working sound, USB not reconized (only in bootloader mode), doesn't charge battery,and phone shows no service. Wlan and bluetooth're working well. I've searched for softers on this forum for many days, I've flashed Radio 2.69.11 and others but not give resuls. Please could you help me finding corret Radio for my Pda.
Current system:
IPL 2.25.0001
SPL 2.21.olip
OS 6.5.0.0
Jose from Brazil
Sorry for unclear english
Thanks
hi there oi cara
silvajose said:
After a changing of OS my HTC is not working sound, USB not reconized (only in bootloader mode), doesn't charge battery,and phone shows no service. Wlan and bluetooth're working well. I've searched for softers on this forum for many days, I've flashed Radio 2.69.11 and others but not give resuls. Please could you help me finding corret Radio for my Pda.
Current system:
IPL 2.25.0001
SPL 2.21.olip
OS 6.5.0.0
Jose from Brazil
Sorry for unclear english
Thanks
Click to expand...
Click to collapse
Hello there...... try reflash your device (the same or different ROM )
also try a hard reset /try tge hard reset first, if dont works try flashing ROM again)
hope this helps you
Good luck
Oi cara tenta um novo flash com a mesma Rom que vc ja tentou quem sabe uma diferente ROm poderia te ajudar...
ou tambem tenta fazer um hard reset (reseteo total) acho que primero deverias tentar com un hard reset e se esto nao consigue arrumar seu aparelho, tenta como un novo flash
tomara que isso poda ter-te ajudado
boa sorte
(desculpa mais nao sou brasileiro e o portugues nao e a minha lingua)
Before Running the ROM Upgrade Utility
Before you run the ROM Upgrade Utility (RUU), make sure you check and do the following first:
1. USB sync cable is connected to the computer.
2. The standby and hibernation modes are disabled on the computer.
3. All running applications on the computer have been closed.
4. USB sync cable is connected to the Mobile Device to establish an ActiveSync connection with the computer.
5. Do not interact with your Mobile Device unless instructed to do so.
General Procedure on Installing the ROM Update
1. Back up your personal data from the Mobile Device to your computer using ActiveSync if you want to ensure you don’t lose any of your data.
2. On your computer, run the ROM Update Utility (RUU) to install the ROM update to your Mobile Device. (The next section provides a detailed procedure on how to install the ROM Update).
3. Restore your personal data back to your Mobile Device using ActiveSync. (Optional)
How to Install the ROM Update
It is very important that the help desk personnel understands very well the installation instructions. Actual hands-on practice with the installation process is recommended for the personnel to better understand any installation problems users may have.
Note: Before running the RUU, back up any personal data from the Mobile Device to the computer first using ActiveSync.
hello, do you know if it's planned to have custom rom... I want to by one (orange) but don't want the orange tuned rom ...
thanks in advance,
erro
dá um erro 240 não sei o que é
the portuguese ROM can anyone upload this, for cookers and developers start´s cook for other device´s!
tks
erro
ROM version 1.28-401.4[66092] english
any USPL method for flashing? or even HSPL
erro
obrigado na mesma mas para mim é complicado
jcmfduarte said:
obrigado na mesma mas para mim é complicado
Click to expand...
Click to collapse
tks jcmfduarte
Opal_HardSPL
is must be used?
Hello.
I try to update ROM of HTC Touch2 with other language (Eng to Rus), and i have problem - ERROR 294 : Invalid vender ID, what need to solve this problem?
Thankyou.
Hi,
I'm having the same problem.I'm trying to update it from italian version to english one and every time gives the 294 error.If there is somebody able to help prease reply.
I have the same problem with CID unlock. By now, It looks there is no way to unlock the CID. Let's wait for a month or longer to see.........
I also have the same problem: ERROR 294.
and what about creating goldcard???
I have the same error294, too.
Should it due to not entering the serial no and got it from HTC?
I am not sure!
you need to unlock it first
tudor006 said:
you need to unlock it first
Click to expand...
Click to collapse
how do i unlock it?
Joel-H said:
how do i unlock it?
Click to expand...
Click to collapse
Gold Card http://forum.xda-developers.com/showthread.php?t=595552
or wait HardSPL http://forum.xda-developers.com/showthread.php?t=578698
i have the same error.. what do i need to do ?
Hi, mine HTC Touch 2 is unlocked(free to all sim cards) ( work with all 5-6 sim cards i try ,and work with sim cards from other countrys) , so i have swedish language !!!, is possible to upgrade my phone with english rom ???
Thanks to all!!!
I have an HD2 512MB.. with a test rom ver..SPL 0.64 i canno't find an official rom or something to boot up.. i have tryed to instal a normal rom (official) and after 92 % freez .. now it's blocked on "update mode" 3 colors display .. i do |Hard|Sof|Reset .. and nothing.. please help with my SN ht97mnw00210 i can't find a rom.. PLEASE HELPPP .. if anybody can do.( (SRY For my bad engl)
you will probably need a goldcard, though even then i am not sure.
You may be able to flash with SSPL, certainly HSPL will not work.
Try and PM a user called xmoo, he seems to know a LOT about test models.
Plug in the USB cable and connect it to your computer.
Install HSPL
Install Radio ROM (if using a custom ROM)
Install ROM (standard ROMs include the Radio ROM)
Ignore the fact that it requests that you have to have ActiveSync/WDMC connected device, as bootloader mode gets around that.
Please read * THIS * - then read it again before doing anything.
Your phone isn't bricked. Just take you time and your phone will be working fine.
fred_up said:
Plug in the USB cable and connect it to your computer.
Install HSPL
Install Radio ROM (if using a custom ROM)
Install ROM (standard ROMs include the Radio ROM)
Ignore the fact that it requests that you have to have ActiveSync/WDMC connected device, as bootloader mode gets around that.
Please read * THIS * - then read it again before doing anything.
Your phone isn't bricked. Just take you time and your phone will be working fine.
Click to expand...
Click to collapse
except that hspl wont work on his spl......
fred_up said:
Plug in the USB cable and connect it to your computer.
Install HSPL
Install Radio ROM (if using a custom ROM)
Install ROM (standard ROMs include the Radio ROM)
Ignore the fact that it requests that you have to have ActiveSync/WDMC connected device, as bootloader mode gets around that.
Please read * THIS * - then read it again before doing anything.
Your phone isn't bricked. Just take you time and your phone will be working fine.
Click to expand...
Click to collapse
how i can install Radio standard rom etc if my SPL is 0.64 and HSPL work with 1.x
give me a hand ..
GOLDCARD - :Allow non signed Software on the Leo
--a: install a regedit software on your Leo e.g. PHM regedit also original PHM Site (offline at the moment)
--b: Run the regedit software
--c: Goto HKEY_LOCAL_MACHINE\Security\Policies\Policies
--d: Look for 00001001 double click it and change the setting from 2 to 1
--e: Reboot the HTC LEO
My phone is not able to run WM .. directly enter on update mode ..
SSPL - Is posible to flash with sspl .. but i don't find a clearly NooB theard ..
denny_the_one said:
GOLDCARD - :Allow non signed Software on the Leo
--a: install a regedit software on your Leo e.g. PHM regedit also original PHM Site (offline at the moment)
--b: Run the regedit software
--c: Goto HKEY_LOCAL_MACHINE\Security\Policies\Policies
--d: Look for 00001001 double click it and change the setting from 2 to 1
--e: Reboot the HTC LEO
My phone is not able to run WM .. directly enter on update mode ..
Click to expand...
Click to collapse
this is for finding the sd card serial, doesnt need to be YOUR phone, can be any phone, or a laptop with sd card reader, or pc with pci bus sd card reader
SSPL - Is posible to flash with sspl .. but i don't find a clearly NooB theard ..
Click to expand...
Click to collapse
put rom.nbh in folder, put sspl.exe in same folder, boot to bootloader, connect to usb, run sspl
samsamuel said:
this is for finding the sd card serial, doesnt need to be YOUR phone, can be any phone, or a laptop with sd card reader, or pc with pci bus sd card reader
put rom.nbh in folder, put sspl.exe in folder, connect to usb, boot to bootloader, run sspl
Click to expand...
Click to collapse
With official rom 92% With custom rom 0%
oh well, worth a try.
when i want to update with official rom after 4% my phone vibrate shortly.. it's ok ?
I don't get it why all the prototypes are in east europe.
The issue is the Radio. Radio 1.x doesn't let you upgrade.
Flash this rom: http://s1.moghtader.net/LEO/PROTHREE/CID/RUU_Leo_HTC_WWE_0.67.405.1_Radio_Daily_1550_Debug.zip
Make shure the phone boots up, and then flash this: http://s1.moghtader.net/LEO/PROTHREE/CID/RUU_Leo_Radio_20090818_transition.zip
This will update the radio, after this you can flash whatever you want.
Solved!
This phone was send from netherlands friend i have somebody there .. i will try now your steps ..
denny_the_one said:
This phone was send from netherlands friend i have somebody there .. i will try now your steps ..
Click to expand...
Click to collapse
Damn, can you give me his contact details.
Does the back of your phone say HTC PRO THREE ??
lasa un numar de tel sau un id in cazul in care nu te descurci
SOLVED tnx ! i will give you the phone number tomorrow when i take contact with my cousin there ..
Extrem de fericit !!! Functioneaza ms frumos ! denny_the_one id meu daca e ceva si vrei sa mai inpartasim diferite probleme ..
YOU ARE THE BEST MAN OF THE WORLD !!!
denny_the_one said:
SOLVED tnx ! i will give you the phone number tomorrow when i take contact with my cousin there ..
Extrem de fericit !!! Functioneaza ms frumos ! denny_the_one id meu daca e ceva si vrei sa mai inpartasim diferite probleme ..
YOU ARE THE BEST MAN OF THE WORLD !!!
Click to expand...
Click to collapse
Help me and trade you phone with my HD2
Or help me find a new prototype for me, cause I ****ed up my old one.
.. i think it's not solved complete .. i still have 0.67 SPL .. i canno't make HSPL ? i have instaled all what you gived me ! sry but i'm very NoOB ..try to flash from sd card ? or SSPL ?
i want update to a custom rom !
denny_the_one said:
.. i think it's not solved complete .. i still have 0.67 SPL .. i canno't make HSPL ? i have instaled all what you gived me ! sry but i'm very NoOB ..try to flash from sd card ? or SSPL ?
i want update to a custom rom !
Click to expand...
Click to collapse
Now you have to flash this rom : http://www.shipped-roms.com/shipped...Radio_Signed_15.30.50.07U_2.06.51.07_Ship.exe
After this you can flash HSPL and flash custom rom.
downloading ... man, you make me happyer then was when i bought it .. i can't give u enough tnks ..
OK SOLVED ! Work HSPL ! Work any ROM !
hi !
I’m sorry for my English , I’m French, I have a problem with my watch after I tried to upgrade, I have this message: - exec '/system/bin/sh': No such file or directory failed (2) -
using port=5555
Waiting for device !
if you have a solution ....
thanks a lot
Upgrade? This message only is shown when you try to flash a new firmware on a watch with unlocked bootloader... You have to find a thread that explains how to flash a new firmware, you must enter fastboot manually (using the buttons)... It is very tricky, you may have to try dozens times before you get it, but it should work.
lfom said:
Upgrade? This message only is shown when you try to flash a new firmware on a watch with unlocked bootloader... You have to find a thread that explains how to flash a new firmware, you must enter fastboot manually (using the buttons)... It is very tricky, you may have to try dozens times before you get it, but it should work.
Click to expand...
Click to collapse
thank you very much for your answer, I will try to do what you told me
I found a good tutorial in French here: (je suis français moi aussi)
https://www.phonandroid.com/forum/t...ur-la-montre-xiaomi-amazfit-stratos-2.189846/
ok
all its ok !!! thank you very much !
I succeeded by putting the fastboot manually!!! complicated but doable!
merci quand même pour le tuto Jessy