hi all
since i am a bigginer in hermes world .. i bricked my herme
from the kind
spl :1.06
boot os:no
gsm :no
kitl :no
i read that the soluition is to Flash any shipped ROM matching my CID,
this Hermes is htc tytn one
anyway to let this device go back to life ??
thanks in advance
If you go to the Hermes (TyTn) Wiki (here: http://wiki.xda-developers.com/index.php?pagename=HTC_Hermes) then look down the page for Upgrading problems you should find all that you need and lots that halp with your problems. People will help you on this site but you are (reasonably) expected to have searched the forum for advice already offered that has helped others in your situation.
I have to say (as will others!) that you should have put Hard SPL on first before upgrading (I assume that you have bricked it through attempting to upgrade the OS ROM). Read the Wiki advice, search for those that have had similar problems and then, if you still need help then I'd suggest that you post your questions (with as many details as you can) back here - in your post.
Related
Hi to all
I bought few days ago a new HTC TyTn. That's my first pocket pc with phone.
When I start my HTC I see the following information:
R 1.03.03.10
Is this the ROM nr. ? Is it a new or old one ? I have a HERM200 with QWERTZ (german) could somebody tell me, which is the newest ROM version ?
many thanks
Sorry ROM nr. is 1.18.257.2
Is this the newest one ?
Hi
Can somebody help me ? I'm a newbie regarding HTC. What should I do to update my system ?
Many thanks
wiki
Check the wiki.....
I checked already wicki....but I don't know which version is the right one. I have a swiss HTC with qwertz.....
No Branding...original HTC....
I'd suggest you to study the Wiki and the forum by yourself. You can force people to briefly answer you, but then there is a big chance you'll create one more (because you didn't learn how to read lots of existing!) thread on how to return your bricked device to the life.
But I don't know which one i should take.....
I have checked my actual ROM with the one you have on your download page. The one I have is actual...(i think)...but it is in german.
I really do not have any idea which one i should download and install....could somebody help me ?
You know what, I do not update my TyTn.
I'm really p***** off.
Kind regards
First thing you have to do is READ:
Hermes Upgrading For Beginners: A Quick Introduction to upgrading your Hermes ROM
There are several ROM upgrades available for the Hermes, you can find them in the Shipped Complete Updates wiki page, be sure to read the notes on this page before you start the ROM upgrade.
Please do NOT ask which is the best ROM for you, the Hermes upgrading forum is flooded with this question and we can't really give you an answer: a ROM upgrade is only as good as the comments it has received from the users on the forums, see the top right column of the Shipped Complete Updates table for each ROM's forum link.
Click to expand...
Click to collapse
But as hellejoep and Lurker0 have told you, you need to read the wiki first, otherwise your next post will be another one of the "HELP ME... MY HERMES IS DEAD". You say this is your 1st PocketPC phone, then START HERE: Hermes For Beginners and after that be sure to read the rest of the hermes wiki.
allucinox said:
But I don't know which one i should take.....
Click to expand...
Click to collapse
If you already followed our directions, have read all around upgrading and flashing, and still asks, then just stop thinking about upgrading yourself. Go to your local service and ask them to do the upgrade for you to the latest official ROM that exists fro your devie... if any!
If you didn't - then go ahead reading and learning.
Hello!
I'm very unsure how I can update my G4 CID looked.
1. Which updateway is recommendable?
2. Can I use all Prophet Roms?
greetz Ben
Can everybody help me please?
I'm still waiting for an answer!
look in the xda-wiki ... you found the right discription.
Not Realy! I have read the wiki and all usefull threads 2 days before!
1. There are different updateways in different foren, threads and wikis and all are for G3. Some users, which have a G4 model write that you have to notice a few points, but the answers are not very clearly.
2. In the german XDA forum they tell me that I can use every prophet rom! BUT: In the wiki is written that the G3 and G4 devices have different hardware! So it is very illegitimate that I can use the same rom!
Please help me! In my statement you can see that I'm very careful because I don't want to brick it!
no you haven't,as i see !
Do you think that I'm lying? Maybe I'm blind or stupid!
1. I don't want that you tell me the updateway. A link to the tutorial which you use / would use will be ok!
2. I can see that you has a normal prophet rom. So I think that the answer is YES?
I've got the same problem. This forum is great, no doubt, but it's a MESS. I couldn't find a clear answer regarding flashing a CID LOCKED G4 Prophet.
Can I flash radio roms ? What about extrom ? Can I just flash Gullums Touch VII right away after flashing NVID rom from here http://forum.xda-developers.com/showthread.php?t=310452 ? Can I even flash this NVID rom to CID LOCKED G4 ?
Lots of questions and for every one I can find 20 different answers, so I'm pretty confused. Maybe someone with the patience can clarify all of that, we don't want to brick our precious Prophets.
Juhuu! A further confused man!
So let's collect our incomplete knowledge together!
I read about a tool, shelltool with it you can update a CID locked device!
http://forum.xda-developers.com/showthread.php?t=293480
I'm reading the full thread at the moment!
My rom question is still open! If I find an answer I update my device with the shelltool!
greetz Ben
OK i see your Problem!
You can Flash all Roms with the NVID Flashtool. You can only Flash Roms with this tool, if no IPL and SPL is included! WM6 Roms use too ways to Flash it. Read the Threads about this WM6 Roms ... you need only to start the Update.bat or simulare bat file ... possible a NVID Flashtool. Some Roms have two bat files for G3 or G4 Device. Use the right! Radio Roms use everytime the NVID Flashtool and work everytime with locked devices.
You dont need the Shelltool way ... this is more Hardcore for develope.
Tank you very much for your answer!
In fact:
-I can flash every prophet rom which has a G4 bat?!
-I can flash every prophet Rom which has no IPL, SPL with NVID flashtool?
My G4 runs WM6 now!
After again 5 hours investigation I know that you CAN'T kill your device with the prophet roms! When all people say "the device is bricked" they don't mean that nothing happens! They say "bricked" if the ppc stuck on the SPL/ISP screen or the bootloader. And both can be fixed with a RUU update like Prophet_PV_Temp or the original O2 rom!
Frtzrwk:
I upgraded to PDAVIET Touch 4.0.0.6!
You can get the link to both RARs in the thread.
First: Prophet_PV_Temp
For Up/Downgrading to Aku 2.2 (WM5)
Second: PV_4.0.0.0.6_Touch
The Real WM6 Rom
-Download and extract!
-Start "ROMUpdateUtility_NV_G4", which install Aku2.2
#wait 10 minutes, your ppc restart automatically
-After the PPC is fully started, you install first "Cert_SPCS" and then "EnableRapi" (you can find the two files in PV_4.0.0.0.6_Touch)
#wait 1 minute and restart your device
-Now you can update your Rom with "Upgrade_Rom"
#wait ~15 minutes
-Hardreset your device! IMPORTANT!!!
Welcome to your new WM6 installation!
If your device stuck at the ISP/SPL screen (loading more than ~5 minutes), go into bootloader (camera + reset) and start again with upgrading to Aku2.2
greetz Benne
This was all in the wiki
See http://wiki.xda-developers.com/index.php?pagename=HTC_Prophet
then
WM6 Upgrade Guide
http://forum.xda-developers.com/showpost.php?p=1296235&postcount=1
And your device can go to heaven when your flashing the wrong rom to a wrong device...
The answer was for Frtzrwk because he is confused too!
So shut the **** up...
I don't think so! Were is written in the f**k wiki that I can use ALL prophet roms!
There is olny one information about G4:
It is not possible to upgrade from a G3 model to a G4 model through software, as the DOC is a piece of Hardware.
Click to expand...
Click to collapse
So the hardware is not the same!
And by the way: I hate rapidshare... test the links!
And when everybody flash a trium rom or another **** rom they shouldn't buy a PPC!
I don't care!
friendly greetz Ben!
P.S. Many thanks to NetrunnerAT for the only usefull answer in this thread and to gullum for his fileservice + great rom!
yes
ok new menber
Ihave o2 mini uprom die
What? I can't understand you!
i just got the wiz and LOVE it! i stumbled on this site SEARCHING for a sim-unlock ... provided by ANTC (thanks) i got it! now i wanna tweak a little or a lot! but ... again i'm a noob with about no experience at this and need some insight (more like a held hand) on how to 1. find a good mod and 2. a detailed explanation on how to use it! i REALLY want to flash rom but need help and i'm tired of going through post after post! (i've been at this for DAYS!!!!) help guys...PLEASE!
IPL 2.25.0001
SPL 2.25.0001
GSM 2.25.11
OS 2.25.11.1
ALL help will be GREATLY appreciated!
There's no substitute for reading the posts. In particular, you need to read the first three stickie posts on how to CID unlock the phone: You have to either soft SPL or hard SPL. Your choice. Verify by checking the SPL IPL numbers.
look here, very good and pretty easy to do and contains everything you need and works great )
http://forum.xda-developers.com/showthread.php?t=298967
WIKI
Use the wiki's
There is a perfect explination on there of how to do EVERYTHING,
It helped me loads =]
First post and I'm pretty new to flashing, so am a bit nervous about it. I've done extensive reading on this forum and have got to confess to some confusion - so please be patient with me!
First of all, I'd like to understand what USPL, SSPL and HARDSPL are? I think I read an explanation somewhere, but can't find it anymore.
I have managed to get HARDSPL 1.16 onto my phone and now that WM6.1 is out, I'd like to flash that version with the new HTC SSPL. Can someone please explain the steps I need to follow and how do I remove HARDSPL?
Thanks in advance for the patience!
Hello members,
I am very happy that the members here are so helpful.
I have an I-mate JASJAM(it was never locked, sold unlocked by the manufacture). Now I want to upgrade the default WM5 to WM6/WM6.5. SO I request u to plz suggest me the easiest and safest way(step-by-step process) to upgrade my jasjam without bricking it and what english-based rom(fast & stable) will be best for me @ the first time.
Although I read the flashing threads many times but I seems to be confused due to many members here have Bricking problem even after following the tutorials. This Jasjam is precious to me(someone gifted. ) and I don't want to loose it. And one thing more I need simple Roms like the default WM5(not with so many addons but must be fast & stable). I have downloaded PDACorner Pro v25, how's it?
Bootloader ver is 1.04
Reason for upgrading : To use Wifi ICS and for more storage(6gb/+)
Thank you
Hi,
if your phone is as precious don't flash it ... It's my first reaction, sorry.
There were many wiki named 'how to flash my hermes'. This is a link to one of them :
http://wiki.xda-developers.com/index.php?pagename=Hermes_UpgradeForBeginners
this link explained ways to flash your phone but the SDCard seems to be the best one. I flash my SPV M3100 with SDCard 3 times following this wiki.
Another one where it's clearly explained that your bootloader (1.04) allow you to flash with any Tytn custom ROM because this version doesn't verify rom CID :
http://wiki.xda-developers.com/index.php?pagename=Hermes_Upgrades
Good luck and read attentivly these helpfull links.