Related
Dear all,
I have tested the WM2003SE (Version_2.06) for some days now and finally found out that one (or the combination) of these extra applications in the Extended Rom will surely KILL the phone functionality if you ever happen to soft-reboot the device while in landscape mode. Here is the list of suspected incompatibles.
- BTPSKeyUpdate_003
- cm_rm_map_o2_v3
- CprogHook.WM2003_2577
- DelAddStarMenu_092404.sa
- delshortcut
- LoadDialogInit_MS_10150402.sa
- startmenu_103wwe
I am absolutely sure that one of these will cause serious device hang once we ever happen to soft-reset while in landspace, but I'm not sure which one. So if any of you have these software installed in version 2.06, please try your best to aviod reseting while in landscape.
BTW, if you happen to know any of these software's intended uses, please also let me know since I"m not sure whether removing them can cause malfunction in other areas. Thanks
Hi there,
thanks for the alert. But i don have the problem like you said. I soft resetted my 2.06 more than 10x in landscape mode but still no reset/hang/idle/trojan virus.....
Guess i'm just a bit lucky!
:lol:
BTPSKeyUpdate_003 - cannot cause hang. It is used only once just after hard reset
cm_rm_map_o2_v3 - some O2 customisations. May cause hang.
CprogHook.WM2003_2577 - my program. Conflicts with some programs and may hang your device on boot (device simply stops responding to keys/stylus). To check this - delete \windows\startup\cproghook.exe and reboot. On most of devices it works fine, but have problems in landscape mode.
DelAddStarMenu_092404.sa - ?
delshortcut - ?
LoadDialogInit_MS_10150402.sa - this is a patch for 2.20CHS OS. Should not be used on other ROMs, but it should not hang your device.
startmenu_103wwe - ?
I've seen that removing SD-card during boot helps sometimes.
did any one faced this?
it happend twice!
my phone shows good signal reception but when some body calls in it will say "can not be reached" like it is off or no signal!
and i also can't make phone calls at that stage!
some thing is killing my phone!
i have tried both radio stack 1.14 and 1.18 and i happened in both.
now i am trying radio stack 1.14 from ROM 1.72! it seems it is not the same 1.14 from mamaich rom. by using hex editor i found that mamaich radio stack version is 1.14a!
what do you think guys?
BEWARE of changing ur radio stack.. 90% ur will have a dead phone once u wake up
Re: did any one faced this?
ammar said:
it happend twice!
my phone shows good signal reception but when some body calls in it will say "can not be reached" like it is off or no signal!
and i also can't make phone calls at that stage!
some thing is killing my phone!
i have tried both radio stack 1.14 and 1.18 and i happened in both.
now i am trying radio stack 1.14 from ROM 1.72! it seems it is not the same 1.14 from mamaich rom. by using hex editor i found that mamaich radio stack version is 1.14a!
what do you think guys?
Click to expand...
Click to collapse
Yeap, your suspicious is very true. Both of them are different. But how different is different would need mamaich to answer how he first got this radio stack!!
:lol:
i used 1.08 radio stack... no problems here.... downgraded it from 1.17
Microsoft Voice Command
Anybody encounter problems with MS Voice Command in WM2003SE ROM?
When I soft re-set the XDAII device, it sorts of hang the devices. Always need me to soft reset a few times. I've since remove it and soft reset is ok.
MS Voice Command in WM2003SE ROM
:arrow: MS Voice Command in WM2003SE ROM working great !
I have upgraded and downgraded many times, never with a failure. I just upgraded to PDAVIET 4.0003. Went without a hitch but now my phone will not stay on the network, also it will every few minutes complain that there is no sim card. Card is fine as tested in my other phones. The interesting part is it functions fine on any 2.2 ROM.
Tried Smart1's True's and all PDAVIET, no WM6 allows the phone to work.
Cold resets don't resolve the issue. Is there something that could have gotten corrupted that is part of the phone OS and not in the ROM's?
I am at a loss to troubleshoot this issue.
Thanks for reading, any advice/suggestions is appreciated.
ron1n, what is the network protocol for your provider?
Do you use pap or chap, the setting choice in CommManager?
Is network set for auto in phone dialog?
In your connection settings, do you use Server assigned ip address or auto?
Since i have upgraded to PDAviet i have almost the same problem.
After soft-resetting my device no gsm connection is found.
The only solution is to go into phone option and start the manual search.
If it's connected it works without any problems.
Strange thing....I also tested a few gsm roms but always the same experience.
R0N1N said:
I have upgraded and downgraded many times, never with a failure. I just upgraded to PDAVIET 4.0003. Went without a hitch but now my phone will not stay on the network, also it will every few minutes complain that there is no sim card. Card is fine as tested in my other phones. The interesting part is it functions fine on any 2.2 ROM.
Tried Smart1's True's and all PDAVIET, no WM6 allows the phone to work.
Cold resets don't resolve the issue. Is there something that could have gotten corrupted that is part of the phone OS and not in the ROM's?
I am at a loss to troubleshoot this issue.
Thanks for reading, any advice/suggestions is appreciated.
Click to expand...
Click to collapse
Reflash Radio ROM (2.47.21 or 2.69.21 will work)
To reply to all of your suggestions. I have tried 5 different radio roms, none will see the phone network (GSM not GPRS) for more than a few seconds with a weak signal, then they fail and either go to flight mode or say that the SIM is missing. To reiterate, this was working fine up until yesterday with a few different WM6 ROM's. Coincidentally, the rear speaker failed at the same time. I resolved that issue, but the lack of phone service persists, although all AKU 2.2 ROM's work fine. Very curious....
DeviLduck said:
ron1n, what is the network protocol for your provider?
Do you use pap or chap, the setting choice in CommManager?
Is network set for auto in phone dialog?
In your connection settings, do you use Server assigned ip address or auto?
Click to expand...
Click to collapse
It is CHAP, although I am referring to the phone service not wireless GPRS. My network is configured for auto, although if I switch to manual (due to the lack of consistent conntection), it will not be able to see any networks, except briefly and intermittently.
Cheers
WM6 Sim Card issues [solution, use radio rom 2.19.21]
I've been using WM6 for awhile now, I've tried SMART1.3, PDAVIET 4.0.0.01, 4.0.0.0.3,4.0.0.0.3a and finally 4.0.0.0.4 .. but yesterday i tried to flash back to SMART1.3. After downgrading and upgrading, i got unknown sim status ! since yesterday , I've change my Radio Rom and OS ( I've tried almost everything ) but i can't get my phone to work in WM6 !! when i flash back to wm5 ( any AKU 2.2 version ) i have no problem with phone or GSM but as soon as I upgrade to WM6, I got unkown Sim status ... anybody , have any Ideas ?!!
Same Problem !
I have exactly the same problem !! it's not from radio ROM or OS !! I've tried 3 different version of radio ROM, and almost every single WM6 OS that is out there ! my phone stop responding yesterday after i changed my OS from PDAVIET 4.0.0.0.4 to SMART1.3 ! since then I've tried everything, but I can't get the phone to work in any WM6 OS! although WM5 (any version of it) is okay !
hma4 said:
I've been using WM6 for awhile now, I've tried SMART1.3, PDAVIET 4.0.0.01, 4.0.0.0.3,4.0.0.0.3a and finally 4.0.0.0.4 .. but yesterday i tried to flash back to SMART1.3. After downgrading and upgrading, i got unknown sim status ! since yesterday , I've change my Radio Rom and OS ( I've tried almost everything ) but i can't get my phone to work in WM6 !! when i flash back to wm5 ( any version) i have no problem with phone or GSM but as soon as I upgrade to WM6, I got unkown Sim status ... anybody , have any Ideas ?!!
Click to expand...
Click to collapse
Did it used to work?
Yes , it used to work ! I've been using WM6 for more than 2 weeks with no problem! recently I upgrade my os to PDAVIET 4.0.0.0.4, but I decide to change the OS back to SMART 1.3, after I changed it back, i got the error "Unknown SIM card , without the pin you can call emergency calls only" I tried my pin and PUK , but none works ! So i changed the OS to WM5 again. I've tried couple of different version of WM5 (JESTER, NVID) and I've found the phone works perfectly in wm5 !! as I said before I tried re-flashing my Radio ROM, but it didn't help !! i still can't get my phone to work in WM6 ! any of Pocket PC gurus, have any suggestion ?
S200 Gone Wacko with WM6 and I don't know why
Hello people
Okay so here is the situation, since about last week I have been using PDAViet 4.0.0.3 on my Qtek S200
Now I love this ROM..so much so that I spoon with it at night...um...crap lol Its fast and lite...but something went terribly terribly wrong yesterday
So around 1pm I disconnect my phone from my computer, and notice a "X" in the data connection arrows...okay I thought nothing of it. I go to a restaurant, get a phone call from my brother, and talk, and everything is fine. From there it went bonkers...it kept on trying to connect a GSM signal, and then would go out to no service...it would keep on trying and trying, and bogging down my phone....
So finally i got it stablize (with an EDGE data signal i thought) and of course a voice signal and went on my merry 2 hour drive back home to Montreal.
When I got to Montreal and was waiting in the dead moving traffic jam, I wanted to check the Windies cricket score on BBC, so I take out my phone and try to make a data connection. But again the X showed...i rebooted my phone and signal about 10 or 20 times, and finally got something...however by the time that happend I had arrived at home so i went and used my computer.
The GSM signal stayed, but I dont know if I had a data connection. I then went to a funeral, turned off my radio entirely, and then when I turn it back on...ooooooooo no signal...it would get 2 bars, and then drop, and then 2 bars "E" symbol, and then drop.
So from then on, i went nuts, opened up the back, took out the battery, checked the sim, installed another sim to make sure..and by now it went even worse..first INVALID SIM...then it went to MISSING SIM...urge to kill rising!
I finally said F it, and hard resetted my phone...but i noticed something upon the screen calibration..."NOTIFICATION ERROR...cannot find calnot.exe". After hard resetting and such, the problem still showed...
This morning, after leaving it overnight, it was still misbehaving...so I went to took it back down to the floating NVID file found here on XDA developers...and oddly enough...no more calnot.exe error...the radio signal is strong, and i get a data connection...So i tried to then upgrade to the new PDAViet 4.0.0.4s ROM, but again...calnot.exe error...so finally i am stuck at the NVID ROM...oy!
So I searched here on XDA Developers and on google...now while people have said they get the calnot.exe error, they also get this reglog.dll (or something to that effect) error as well...me on the other hand am only getting that calnot.exe error, which would seem to be the root of my problem.
What can I do fix this, and get back to the speedy 4.0.0.3 ROM (man I love that ROM)
Phone info:
ipl: 2.09
spl: 2.20.0000 (so I guess that my Qtek S200 is a G3 model)
radio: 02.47.21 (i even moved up to 02.69.21)
os: 2.20.7.34
so i really appreciate the help guys...take care...
*howls like a wolf*....nothing?
hofo_mofo said:
*howls like a wolf*....nothing?
Click to expand...
Click to collapse
Flash again the WM5 NoVid Rom,hard reset and if you come up with the same error,hard reset again... Tell me what happens... If it works flash PDAViet 4.0.0.0.3a...
Holy S*** I have the same Problem for like two weeks!!
Man , I have exactly the same problem !!! exactly !! i had PDaviet 4.0.0.0.4 and one day I got the same thing, No signal , then after i hard reset, the Calnot error ! then Hard reset again, and this time I got the replog error !
I get "Unknown Sim Card!" or "Unknow Sim Card status enter your pin" whenever I install WM6! My phone works perfectly in Wm5 though !!
I flashed radio rom in WM6, I also tried different sim Cards , but none works !I can not get the phone to work in wm6!
By the way, NVID is not a good rom to stay with.
tonydeli7 said:
Flash again the WM5 NoVid Rom,hard reset and if you come up with the same error,hard reset again... Tell me what happens... If it works flash PDAViet 4.0.0.0.3a...
Click to expand...
Click to collapse
Still the same thing...i have treid 4.0.0.0.3a, 4.0.0.0.3, 4.0.0.0.4, 4.0.0.0.4s, 4.0.0.0.4sse, and Mobiz 2.0b3.....all nothing...
Sometimes it would be calnot.exe notification error, or replog.dll, or now clocknot.exe error...so far only NVID works
hma4 said:
Man , I have exactly the same problem !!! exactly !! i had PDaviet 4.0.0.0.4 and one day I got the same thing, No signal , then after i hard reset, the Calnot error ! then Hard reset again, and this time I got the replog error !
I get "Unknown Sim Card!" or "Unknow Sim Card status enter your pin" whenever I install WM6! My phone works perfectly in Wm5 though !!
I flashed radio rom in WM6, I also tried different sim Cards , but none works !I can not get the phone to work in wm6!
By the way, NVID is not a good rom to stay with.
Click to expand...
Click to collapse
In a way I am glad you are having the same problem...so I know I am not a nut lol (and nor am I alone)...but of course its not good to relish in someones downfall, so of course it is also a bad thing eh..
What ROM would you suggest then? NVID seems alright, but I don't know of any others out there (well somewhat)...thanks!
I wish we knew why it happened at first place!
for wm5, if you want a clean, fast and reliable Rom, try Jesterz Rom
http://forum.xda-developers.com/showthread.php?t=284578
you might want to re flash the start-up image to HTC logo... you can find the .cap in the same thread.. I also updated the radio rom too, you can find it in prophet wiki.
Jesterz Rom is nice cause you don't have to uninstall anything, it's really clean and stable. it is by far better than NVID, but don't ask why cause i have to ramble a lot.
Oh by the way if you found out why this happened to us .. let me know
hofo_mofo said:
Still the same thing...i have treid 4.0.0.0.3a, 4.0.0.0.3, 4.0.0.0.4, 4.0.0.0.4s, 4.0.0.0.4sse, and Mobiz 2.0b3.....all nothing...
Sometimes it would be calnot.exe notification error, or replog.dll, or now clocknot.exe error...so far only NVID works
Click to expand...
Click to collapse
Try flashing PDAViet WM5 Temp
http://rapidshare.com/files/32728615/Prophet_PDAViet_Step1.zip PASSWORDDAVIET
or PDAMobiz WM5 Temp......
http://www.sharebigfile.com/file/178269/fantastic-b3-Step1-rar.html
and then try to flash truneytral's WM6 if you haven't already...
http://www.savefile.com/files/763142
If you don't want russian keyboard ,just follow DEVILDUCK's procedure here http://forum.xda-developers.com/showthread.php?t=302067&page=18
and follow the guide
http://forum.xda-developers.com/showthread.php?t=310452(just flash one of the above Wm5 temp roms,instead of NVid)
tonydeli7 said:
Try flashing PDAViet WM5 Temp
http://rapidshare.com/files/32728615/Prophet_PDAViet_Step1.zip PASSWORDDAVIET
or PDAMobiz WM5 Temp......
http://www.sharebigfile.com/file/178269/fantastic-b3-Step1-rar.html
and then try to flash truneytral's WM6 if you haven't already...
http://www.savefile.com/files/763142
If you don't want russian keyboard ,just follow DEVILDUCK's procedure here http://forum.xda-developers.com/showthread.php?t=302067&page=18
and follow the guide
http://forum.xda-developers.com/showthread.php?t=310452(just flash one of the above Wm5 temp roms,instead of NVid)
Click to expand...
Click to collapse
Okay, I spend another 2 hours to update the phone ! This time i didn't get the
Calnote.exe or replog error !! but my phone still doesn't work !
The phone connection is not stable ! it comes and goes ! and i get " Unknow SIM status. 3 attempts remaining. Only emergency calls can be made without a pin." well i tried different sim card , and i still get the same error !
HELPPPPPPPPP Pleaseeeeeee !
I just Upgraded my phone to ASreg3.3.12, and LvsW Aku2.3 and still doesn't work !!
I get the same error ! the Phone App doesn't function! I get Unknown Sim Status! I've tried NVID, and Jesterz Roms , both AKU 2 and both work fine !!
any suggestions ?
Strange, however, can you post which radio version you have when you switch roms ? it could a radio rom problem....
Several months back, I was looking to upgrade my G3 Prophet (Imate Jamin). I had one serious problem with all the WM6 ROMs I've tried, as well as with Aserg's3.3 ROM.
The phone will intermittently not recieve calls. The caller is quickly diverted to voice mail, and I get no ring, no notification of a missed call, and no message waiting indicator. As a surgeon who's on call a fair amount, this was unacceptable. Problems with contacts or wifi settings I could work through.
I went from Fantastic Mobitz 1.1i to PDAViet 4.0.0.0.3 to Aserg 3.3 without resolution. I have tried Radio ROMs 2.20.21, 2.47.21, 2.61.21, and 2.69.21 without success in all of them.
In the end, I downgraded to the latest shipped WWE ROM, which was AKU 2.2. This has been fairly stable, but as I look at the newest Touch ROMS, I can't help but feel a new case of ROM envy coming on.
Has anyone had the same problem with the early Crossbow ROMs? If so, has it been fixed in the later ROMS? I know there are lots of people out there who have never had any missed call problems, so my question is only for those few people like myself who missed calls with early versions of WM6. Was this fixed in later versions? Specifically, which ones?
Much thanks,
Alan
Gave in to the temptation.
After waiting a few days for a reply, I couldn't resist - I flashed Prophet Touch X when it became available.
I love the ROM - Fast, nifty touch features, Cube, etc.
However, I still have the same problems - I frequently and intermittently do not receive calls, there is no missed call indicator or missed phone numbers showing.
Does anyone know the cause or a fix? I can't bear the thought of going back to WM5!
My device is a G3 Prophet (Imate Jamin):
IPL 2.20
SPL 2.20.0000
Protocol 4.1.13.24
OS 10.0.0.0
EXTRom Prophet Touch X
Alan
adsbar said:
After waiting a few days for a reply, I couldn't resist - I flashed Prophet Touch X when it became available.
I love the ROM - Fast, nifty touch features, Cube, etc.
However, I still have the same problems - I frequently and intermittently do not receive calls, there is no missed call indicator or missed phone numbers showing.
Does anyone know the cause or a fix? I can't bear the thought of going back to WM5!
My device is a G3 Prophet (Imate Jamin):
IPL 2.20
SPL 2.20.0000
Protocol 4.1.13.24
OS 10.0.0.0
EXTRom Prophet Touch X
Alan
Click to expand...
Click to collapse
Which rom do you use for step 1 ? try to flash with another NVID Flash step 1 or PV_temp then flash to WM6. otherwise you can try to change the radio rom to 2.19
If the problem still exist, i think your phone is having problem with the Radio hardware.
adsbar said:
After waiting a few days for a reply, I couldn't resist - I flashed Prophet Touch X when it became available.
I love the ROM - Fast, nifty touch features, Cube, etc.
However, I still have the same problems - I frequently and intermittently do not receive calls, there is no missed call indicator or missed phone numbers showing.
Does anyone know the cause or a fix? I can't bear the thought of going back to WM5!
My device is a G3 Prophet (Imate Jamin):
IPL 2.20
SPL 2.20.0000
Protocol 4.1.13.24
OS 10.0.0.0
EXTRom Prophet Touch X
Alan
Click to expand...
Click to collapse
u listed everything but the radio rom. Try different radio version.
2.20.x prob good for balance.
2.69.x is hte newest radio rom, a bit harsh on the battery consumption
2.19.x is old, might not work on all the gprs stuff.
JUST me experince, YMMV.
I have a imate just like yours, same IPL/SPL.
never had that problems and always flashed my imate with G4 step 1 roms.
regards
RP
tb146 said:
Which rom do you use for step 1 ? try to flash with another NVID Flash step 1 or PV_temp then flash to WM6. otherwise you can try to change the radio rom to 2.19
If the problem still exist, i think your phone is having problem with the Radio hardware.
Click to expand...
Click to collapse
Sorry, had a lapse there..
My RadioROM is 2.47.21. I had tried multiple RadioROMs before in earlier WM6 versions, with no change. On the other hand, some other threads that seem related have had success with 2.19.21, so I'll give it a try. I don't use GPRS for anything anyway.
One question on that - I know you don't lose any data flashing a RadioROM, but one thread mentioned having to hard reset after the flash to get the new RadioROM functionality. Is this true? (Hoping not)
Alan
adsbar said:
Sorry, had a lapse there..
My RadioROM is 2.47.21. I had tried multiple RadioROMs before in earlier WM6 versions, with no change. On the other hand, some other threads that seem related have had success with 2.19.21, so I'll give it a try. I don't use GPRS for anything anyway.
One question on that - I know you don't lose any data flashing a RadioROM, but one thread mentioned having to hard reset after the flash to get the new RadioROM functionality. Is this true? (Hoping not)
Alan
Click to expand...
Click to collapse
Radio rom is seperate. Like bios, you dont format HDD after upgrade bios. It's safe to upgrade without hard reset. However it doesnt hurt to install latest ROM also (which requires hard reset) Also what kinda 3rd party software you installed on there? commonly when prophet is in data mode, sometime voice doesnt come in, might be something doing that without you knowing.
Yes, that is true.
Radio ROM is not involve with OS ROM, you can flash your radio ROM to any version without effecting to the OS ROM and no need to hard reset.
Hard reset is only for upgrade and downgrade the OS ROM.
I have flashed to any radio ROM without Hard Reset.
Each Radio ROM has different configuration, so it can effected your battery drain because the receiving signal can be different at any radio rom.
we assume the latest radio rom is better than the earlier version but the best things, you can try all the available Radio ROM which is fit to your need.
Cheers,
I have the same problem
I have the same problem - my Imate Jamin (Prophet G3) started to miss calls from time to time after I upgraded to WM6. Tried multiple RadioROMs and multiple ROMs - no effect whatsoever
I have the same problem, but i don't know the solution.
2.19.21 is the solution for me.
rublin said:
I have the same problem - my Imate Jamin (Prophet G3) started to miss calls from time to time after I upgraded to WM6. Tried multiple RadioROMs and multiple ROMs - no effect whatsoever
Click to expand...
Click to collapse
Sorry for so long to reply, but I wanted to make sure...
Since downgrading my RadioROM to 2.19.21, I have not had the missed call problem. The last time around on WM6 I tried everything from 2.20.21 on up to the latest without any improvement.
If you haven't tried 2.19.21, try it.
As a side note, I feel the Prophet Touch X ROM works great now, and I'm experiencing no bugs. However, the battery drain is more than the WM5 WWE.
YMMV
Alan
After i did the hardspl and upgrade to WM6.1 i have 2 serious problems. The first: when the battery is less than 20% and do or accept calls, after some seconds the pda reboot when i speaking. the second: i can send but can't recieve data via bluetooth connection. the beam is activate and the pda discoverable. even pair the device it can't receive anything!!!
ipl 2.20
spl 2.G3.4PDA
rom transform 1.1
Can these problems fix??? If not how to downgrade to the previous spl? I tried with pdaviet but nothing. thank you...
First, Transformer 1.1 isn't a WM6.1 ROM but WM6.0.
Your problems are reported before, but in almost all cases one or two hard resets did the job. If not try another more clean ROM and see if you still have the same trouble.
Remember, the Prophet is a delicate device and very sensitive for all kind of fluctuations during flashing. So don't expect it to be as stable and universal as your desktop PC. If it don't suceed the first time, just do it again...
manolisf said:
After i did the hardspl and upgrade to WM6.1 i have 2 serious problems. The first: when the battery is less than 20% and do or accept calls, after some seconds the pda reboot when i speaking. the second: i can send but can't recieve data via bluetooth connection. the beam is activate and the pda discoverable. even pair the device it can't receive anything!!!
ipl 2.20
spl 2.G3.4PDA
rom transform 1.1
Can these problems fix??? If not how to downgrade to the previous spl? I tried with pdaviet but nothing. thank you...
Click to expand...
Click to collapse
I have had the same problem with some other versions of WM6, posted here, also I tried to change RadioROMs and come back to WM5 - the result was the same like yours. Then I decided to replace my battery with the new one and it worked!!! Even is told that Li-Ion batteries do not have memory effect, looks like it is other way around...
Try to replace the battery.
i had the very same problem with my battery. just went off at 20%. i have gone back to wm5 for a while now. the problem remained though. therefore i bought a new (not original) battery. but strangely, this one starts showing this behaviour too, although only at 6%.
what the f**k is this??? does it have anything to do with cracking the hard spl???
why do you guys let the battery drain so much? just recharge the battery, don't let it fall that low....
anyway, my 2c.
manolisf said:
After i did the hardspl and upgrade to WM6.1 i have 2 serious problems. The first: when the battery is less than 20% and do or accept calls, after some seconds the pda reboot when i speaking. the second: i can send but can't recieve data via bluetooth connection. the beam is activate and the pda discoverable. even pair the device it can't receive anything!!!
ipl 2.20
spl 2.G3.4PDA
rom transform 1.1
Can these problems fix??? If not how to downgrade to the previous spl? I tried with pdaviet but nothing. thank you...
Click to expand...
Click to collapse
I had the same problem [size=+2]before[/size] I have my old battery changed.
rondol1 said:
First, Transformer 1.1 isn't a WM6.1 ROM but WM6.0.
Your problems are reported before, but in almost all cases one or two hard resets did the job. If not try another more clean ROM and see if you still have the same trouble.
Remember, the Prophet is a delicate device and very sensitive for all kind of fluctuations during flashing. So don't expect it to be as stable and universal as your desktop PC. If it don't suceed the first time, just do it again...
Click to expand...
Click to collapse
thanks for your advice! but i have tried also with "shadow my edition 2" by varavusvincent and "shadow 2.0 ce" by cloudyfa which are wm6.1 roms. no results!!! the roms are stable, i think the problem isn't on this. i think something go wrong with the spl. i have done hard reset again and again but the same problem. the transformer1.1 is very stable(i worked on it 6 months +) and i hadn't any problem with this rom before. how can i do downgrade to previous spl?
i extracted official spl 2.15.0001 (g4) from the latest o2 update (germany). so if anybody is interested, i can upload it. but it is G4 ONLY.
i reverted to wm5 and spl 2.15 myself having some very, very strange behaviour with my old battery. i tried the procedures suggested by rondol1. now everything SEEMS to be in order. but i have not discharged my battery completely. i will report back what happened.
cheerio.
I don't know in detail what the SPL does alltogether, so I can't confirm if the mentioned problem are (or can be) related to the HardSPL installation. But according to several posted solutions regarding the battery, it seems that there is definitly a relation on that issue.
To install a "normal" SPL, you can flash an original ROM from your vendor, but then everything will be bach to factory default. You can also take advantage of the offer from Chriskay above...
My O2 Atom Life got a problem "automatically turn off it self when low battery" and if I try to turn on , it will shut down again while booting Windows ( Windows - Splash Screen )
By this case , people say it was cause of Battery and need to change a new battery to solve the problem.
So, I brought a new battery , but the problem still left ...
later I once had changed my SIM CARD to my other mobile . After , I tried to turn on my O2 atom life and it was turn on "completely" without shutting down while booting Windows. Also the "automatically turn off it self when low battery" is not occur when I am not insert SIM CARD
So , in conclude , No any problem occur when I'm not insert SIM CARD
Would anyone please tell me What the cause of this? ... Hardware of Software or how can I fix it?
- Thank you very much for every answer -
ALICEACADEMY said:
My O2 Atom Life got a problem "automatically turn off it self when low battery" and if I try to turn on , it will shut down again while booting Windows ( Windows - Splash Screen )
By this case , people say it was cause of Battery and need to change a new battery to solve the problem.
So, I brought a new battery , but the problem still left ...
later I once had changed my SIM CARD to my other mobile . After , I tried to turn on my O2 atom life and it was turn on "completely" without shutting down while booting Windows. Also the "automatically turn off it self when low battery" is not occur when I am not insert SIM CARD
So , in conclude , No any problem occur when I'm not insert SIM CARD
Would anyone please tell me What the cause of this? ... Hardware of Software or how can I fix it?
- Thank you very much for every answer -
Click to expand...
Click to collapse
You mean the problem was fixed when you inserted a different SIM card?...that's strange...have you tried reflashing your phone and tried using the same "bad" SIM?
juliuscezar said:
You mean the problem was fixed when you inserted a different SIM card?...that's strange...have you tried reflashing your phone and tried using the same "bad" SIM?
Click to expand...
Click to collapse
Thank you for your attention . Actually , I mean "NO SIM CARD" or "TURN OFF PHONE MODE"
ALICEACADEMY said:
Thank you for your attention . Actually , I mean "NO SIM CARD" or "TURN OFF PHONE MODE"
Click to expand...
Click to collapse
I guess you got to have it checked to a qualified technician.
No reset below 70% energy
I have the same problem. Thanks to your discovery i am sure that it is a bug in the radio firmware. Seems that there are different radios ,because not all users of this device have that problem. For me, if i have to do a reset, for installing software or so, i switch the device into flight mode, and then i can do a reset even at 20% of energy !!! If the device hangs for some reason, try to reach the Comm-manager through the hardware-button "Start-Menu" to switch the phone off. If that doesn´t work, remove the SIM-card, restart your device, switch to flight mode (works without SIM-card inside) and then insert the card again. This last solution is not very comfortable, but in case of emergency it is rather useful.
My radio-firmware-number is AL1_KLNC2340_080121_RS001
Hopefully someone will write a new radio firmware without that lousy bug and tell us how to update our beloved AL.
Greetings from Germany
Hubie53
hubie53 said:
I have the same problem. Thanks to your discovery i am sure that it is a bug in the radio firmware. Seems that there are different radios ,because not all users of this device have that problem. For me, if i have to do a reset, for installing software or so, i switch the device into flight mode, and then i can do a reset even at 20% of energy !!! If the device hangs for some reason, try to reach the Comm-manager through the hardware-button "Start-Menu" to switch the phone off. If that doesn´t work, remove the SIM-card, restart your device, switch to flight mode (works without SIM-card inside) and then insert the card again. This last solution is not very comfortable, but in case of emergency it is rather useful.
My radio-firmware-number is AL1_KLNC2340_080121_RS001
Hopefully someone will write a new radio firmware without that lousy bug and tell us how to update our beloved AL.
Greetings from Germany
Hubie53
Click to expand...
Click to collapse
If the problem is radio firmware you may have to flash your AL with an official ROM at O2 site. Have your AL flashed, so that you can also flash it with WM6.5. in case you want it.
juliuscezar said:
If the problem is radio firmware you may have to flash your AL with an official ROM at O2 site. Have your AL flashed, so that you can also flash it with WM6.5. in case you want it.
Click to expand...
Click to collapse
I guess Atom Life is an extremely poorly built phone.
The reason of rebooting is the phone drawing too much power and it shuts down.
Without sim card, the 3G / mobile function will certainly draw up lots of power.
Atom Life poorly built
mcdull said:
I guess Atom Life is an extremely poorly built phone.
The reason of rebooting is the phone drawing too much power and it shuts down.
Without sim card, the 3G / mobile function will certainly draw up lots of power.
Click to expand...
Click to collapse
Maybe the phone function draws a lot of energy. But after rebooting the battery has lost around 2 or 3% of energy. I think this is normal and not booting below 70% must have other reasons, for example wrong recognition of the battery status, and that must be (i think so) a false parameter in the radio firmware (or in the startup sequence of the ROM?).
hubie53
due to the bad battery and freezing of the phone, I have given up the atom life and get myself a touch HD. I do know that some of the revision of atom life would be better..
same problem here
but with atom exec
please i get tired from this ppc
hi,all
Greeting,
i have same problem even already replace the battery with the new one,
is it radio version problem..?
my radio is : AL1_KLNC2340_070905_RS001
OS is AtomLife WM 6.5 builds 28233 • 23569 • 23115 • 21905 • 21754 WWE of bajok
can anyone advise me regarding these matter,or should i change the radio version into AL1_KLNC2340_080121_RS001 as per Juliuscaesar says..?
tks all,
might be helpfull of your kindly advise
Warm Regards
Rama for atom life indonesia
ramaramsati said:
hi,all
Greeting,
i have same problem even already replace the battery with the new one,
is it radio version problem..?
my radio is : AL1_KLNC2340_070905_RS001
OS is AtomLife WM 6.5 builds 28233 • 23569 • 23115 • 21905 • 21754 WWE of bajok
can anyone advise me regarding these matter,or should i change the radio version into AL1_KLNC2340_080121_RS001 as per Juliuscaesar says..?
tks all,
might be helpfull of your kindly advise
Warm Regards
Rama for atom life indonesia
Click to expand...
Click to collapse
You should've upgraded your device's radio into AL1_KLNC2340_080121_RS001 before flashing, mate.
i did hardreset for my atom life, or maybe change your battery with the new one and than do hardreset...good luck...
regards.