Related
Hi
I tried to unlock my orange m3100 (swiss) SPL 1.04. When I run the MaUpgrade I get the ERROR message 120 Country ID mismatch and the program quite / radio rom version remains at 1.06.00.00.
Please help me - thanks
Surely your running the MaUpgrade_noID.exe program??
S.K.
Which bootloader do you have?
[edit]Sorry-I just saw you listed 1.04 in your original post[/edit]
Run the software when your fone is under the tri-color screen mode, rather than wm 5.0
I tried to upgrade my athena (french rom) with wm6 english version, and it was the crash
the original rom is dammaged and athena w'ont start enven with hard rest ???
(I did unlock it, it was bought in belgium and its was sim-unlocked).
Any help please to re-install original french rom or any thing else ???
Enter Bootloader mode and check if it says SPL: Olipro
If yes, that you should be able to flash a ROM (the one for your device)
even without ActiveSync Connection
If not, you haven't unlocked correctly.
Don't know what you can do then -_-
I unbrick my htc p3600 with HTC Trinity Stack Overflow exploit - how to unbrick any Trinity stuck in bootloader!! Can somebody create Hermes unbrick because when i use Hermes i always see message image corrupted because i not have activesync in my HERMES stack in logo only bootloader!!!!Cid locked!!! i can not intsall any rom hardspl...etc...try more then 50rom and all hardspl...all cid....now only see this http://forum.xda-developers.com/showthread.php?t=308691 for Trinity IS ANY CHANCE TO CREATE splxploit FOR Hermes with spl.nb THAT CAN RUN FROM DOS and change bootloader sspl ??? Sory for my bad english please need help where is pof???
please read here:
http://wiki.xda-developers.com/index.php?pagename=Hermes_Unbrick
this not work because i ask to someone create Exploit???
this not work i try all i not have kitl mode , and can not use SSPL+ActiveSync because i stack in bootloader-no active sync my problem is to change bootloader when device is cid locked only solution to create Hermes overflow exloit and when i have temporaly cid unlock my device then i can flash rom.
Flash a cooked ROM, leave the device in bootloader mode, connect with USB....run the RUU and select your bootloader version.
The RUU shouldnt care that the device is already in bootloader mode, just follow the usual steps.
Explain me more because
when i try to flash RUU SPL Downgrade Guide from http://www.mrvanx.org/cms/index.php?option=com_content&task=view&id=59&Itemid=27
100% then always receive message image corrupted.
I WANT TO UnBrick the Bricked Hermes with "SPL 2.03 - IPL 1.04 - NO GSM - KITL Disabled"
There are many people have this kind of brick but still no solution for it.
I want to ask the mods to make this thread sticky so if anyone find a sulotion for this type of brick would post it Here.
Summary :
IPL: 1.04
SPL: 2.03
CID: NO SUPER CID LEVEL=FFF
NO GSM
KITL Disabled
I have tested all the possible sulotions available in the wiki but none of the could help me unbrick my hermes.
P.S. : Please just post your sulotions here NOT your comments like "you CAN TRY THIS I TRY ALL IN XDA DEVELOPERS",
----so is any good man in this forum can fix this and create Hermes Stack Overflow splxploit HERMES to create
HERM100
IPL-SSPL by des
HERM100
SPL-1.09.ds - to temporaly fix and unlock cid first then we can flash any rom?? or any other metod.. ......can you explain please.???
How to jump spl address in hermes from dos??
Is any chance to jump spl to address in hermes or artemis from dos or mtty command what is spl address for hermes bootloader for artemis spl address is:.
* Kaiser Jump address is 0x00000000
* Artemis & Herald Jump address is 0x10000000
How to chenge bootloader in cid locked demaged
cid in hermes ???? HTC Trinity Stack Overflow exploit have this read in :
http://forum.xda-developers.com/showthread.php?t=308691
Who can explain and create for hermes?????
It's wierd!!!
there is no sign of POF and olipro!
I want to know where are they!!!
Maybe they are hired by HTC
Unbrick of Hermes IPL 1.04 SPL 2.03
mbsshop1302gsm said:
when i try to flash RUU SPL Downgrade Guide from http://www.mrvanx.org/cms/index.php?option=com_content&task=view&id=59&Itemid=27
100% then always receive message image corrupted.
I WANT TO UnBrick the Bricked Hermes with "SPL 2.03 - IPL 1.04 - NO GSM - KITL Disabled"
There are many people have this kind of brick but still no solution for it.
I want to ask the mods to make this thread sticky so if anyone find a sulotion for this type of brick would post it Here.
Summary :
IPL: 1.04
SPL: 2.03
CID: NO SUPER CID LEVEL=FFF
NO GSM
KITL Disabled
I have tested all the possible sulotions available in the wiki but none of the could help me unbrick my hermes.
P.S. : Please just post your sulotions here NOT your comments like "you CAN TRY THIS I TRY ALL IN XDA DEVELOPERS",
----so is any good man in this forum can fix this and create Hermes Stack Overflow splxploit HERMES to create
HERM100
IPL-SSPL by des
HERM100
SPL-1.09.ds - to temporaly fix and unlock cid first then we can flash any rom?? or any other metod.. ......can you explain please.???
Click to expand...
Click to collapse
Hi
I had the same problem, I tried I think all the tips I read on the forum, finally I put my phone in Bootloader mode, I uncheck usb connectios on active sync, and the most important thing I tried with the following ROM: RUU_hermes_CINGULAR_WWE_2.15.502.3_6275_1.40.30.00_108_Ship for my surprise after trying will all kind of roms, this one did the installation of a new radio and finished with 100% in downloading the new OS and radio GSM, I have a working Hermes! If I could help in anything let me know
edyfast said:
Hi
I had the same problem, I tried I think all the tips I read on the forum, finally I put my phone in Bootloader mode, I uncheck usb connectios on active sync, and the most important thing I tried with the following ROM: RUU_hermes_CINGULAR_WWE_2.15.502.3_6275_1.40.30.00_108_Ship for my surprise after trying will all kind of roms, this one did the installation of a new radio and finished with 100% in downloading the new OS and radio GSM, I have a working Hermes! If I could help in anything let me know
Click to expand...
Click to collapse
Did you have exactly the same problem with
IPL 1.04
SPL 2.03
NO GSM
NO CID
KITL Disabled?????
and if it's true,is that ROm a WM5 or WM6 ROM??
Tested! But DID NOT HELP!!!!!!!!!
8525 bricked IPL 1.04 spl 2.03 Solution
koorosh_bsboys said:
Did you have exactly the same problem with
IPL 1.04
SPL 2.03
NO GSM
NO CID
KITL Disabled?????
and if it's true,is that ROm a WM5 or WM6 ROM??
Click to expand...
Click to collapse
Hi
It is a WM5 Rom, this is the only one I tried that worked at the first try!, however it seems at the beggining that wont work because it takes too much time to advance in the percentage bar on downloading, for me took about 35 minutes, the good notice is that this rom completes the installation and installs a WM5 but it is a good start since once you are done with this you can install hard spL on your phone, you mentioned that didn´t work please be patient if you notice that the percentage bar is working, at the end this will fix your phone.
where
can you sent me link to download or put in megaupload to try this rom please respond its very urgent to try.Sent me link to download??
And if my phone cid locked this will work or not???/
Unbrick 8525 IPL 1.04 SPL 2.03
Hi
here is the link:
http://rapidshare.com/files/25381512/RUU_Hermes_CINGULAR_WWE_2_1_.15.502.3_6275_1.40.30.00_108_Ship.exe
My phone was cid locked and KITL disable before I fixed it! now I did the unlocking using PoFs cid and sim unlocker and it worked fast and easy at the first try!
I understand your urgent requierement I was 15 days with my phone damaged with the only showing of IPL 1.04 and SPL 2.03 "serial" text on the bottom.
This Link Not No File Found
CAN YOU UPLOAD NEW LINK this link is dead :http://rapidshare.com/files/25381512/RUU_Hermes_CINGULAR_WWE_2_1_.15.502.3_6275_1.40.30 .00_108_Ship.exe
please use megaupload.....respond me please when you add new link.
THIS LINK is dead NO FILE FOUND
This will not work only solution to unbrick any Hermes stack in bootloader cid locked that somebody create Herems Stack Overflow exploit - ANY CHANCE TO CREATE splxploit FOR Hermes with spl.nb THAT CAN RUN FROM DOS and change bootloader sspl temporaly tehn we can flash any rom ???
Here is link for Trinity and work i unbrick my p3600 with this cid locked stack in bootloader:
http://forum.xda-developers.com/showthread.php?t=308691 for Trinity IS ANY CHANCE TO CREATE splxploit FOR Hermes
Sory for my bad english please need help where is Pof to creat this for Hermes??Imei check and htc men help??
How to unbrick herm100 in tri-clour mode
download Mtty1_42.
CONNECT brick herm100 with usb
FROM the port setting,choose USB
A white page should open
TYPE set 14 0
TYPE set 16 0
soft reset with stylus.
HURRAY u are down.
dont 4get to say thanks
MTTY's "wdata" cmd unlocked on SPL 2.03!Can it Unbrick the bricked ones w SPL 2.03??
I have found a way to unlock "wdata" command in bootloader 2.03!
summary:
In bricked hermeses with SPL 2.03 - NO GSM - KITL disabled, the wdata command is locked. I am not good at programing but I want to know if it possible to change the SPL(bootloader) of bricked hermeses with this command in mtty.exe??!!
How to:
1.Use the trinity splxploit -windows by pof (unbrick.bat). Let the program run for some seconds and then just close that.
2.Do not unplug the usb or soft reset the device.
3.Run mtty.exe and type "wdata" the command is unlocked!
I wanna know can we erase just the CID by erase command and write a CID value using wdata command?
If it can be done then we can unbrick our hermeses!
Yes it enable wdata, you don't need to change CID, if you can load OS.nb, then from Windows use SSPL. But real problem is how to load OS.nb via wdata
need Hermes splxploit -windows ??
i many time write in this forum who can unbrick hermes with spl 2.03 cid locked,no kitl,can not boot,stack in bootloader....only solution is that pof
or good man create Hermes splxploit -windows this will jump spl address and temporaly cid unlock Hermes then we can flash any rom.
I unbrick many Trinity bat wait solution for Hermes???
Bat wait ........and wait.
Zemo znas li ti kako da sredis brikovan hermes cid zakljucan spl 2.03...itd.
Yes, we need pof help, it will be very good to have spl exploit for hermes.
Bas nas dosta ima na XDA, mozes samo preko JTAG koliko je meni poznato ali neznam nikog ko to moze da uradi. Odakle si?
Yes, we need pof help. It will be very nice to have SPL exploit.
Mislim da moze preko JTAG, ali neznam ko to moze da uradi, odakle si?
Bad news people,
The memory layout on hermes is different than on trinity, i already looked
into this and is not possible to exploit it in the same way as I did in
trinity.
I am sorry but I have no time to invest on this now
Best Regards,
pof
Click to expand...
Click to collapse
We can wait for pof, and pray
So, we will wait.......!
I'm a prayer too
So, we will wait.......!
I'm a prayer too
Reply With Quote
Click to expand...
Click to collapse
MY HERMES IS BOOTED OS TODAY!!!
It was half dopod and half T-Mobile...
T Mobile Customanisation: Instalig Dopod stuff???
I soft reset it and it stuck again.
Booted OS
Today my hermes booted os, after soft reset it stuck again. But there is hope, right?
Can you solve No GSM with SD Card Flash?
Then Copy Hardspl V7 to the sd card and when your mobile booted into os just run that from your device.
Yes, I know that.
If you have similar problem:
1.Leave Hermes without battery for some time, hour or so.
2. DO NOT turn it on, do a HARD RESET*
*If don't work try several times
hardspl v7 or any other after 100% message image corupted
koorosh_bsboys said:
Then Copy Hardspl V7 to the sd card and when your mobile booted into os just run that from your device.
Click to expand...
Click to collapse
Yes i know this bat this will not work if hermes cid locked and stack in bootloader no kitl and gsm.Can not boot os this only work in hermes cid unlocked device then sd card work...bat what i can do when device cid locked and can not connect in activsync and everytime when try to use hardspl v7 or any other after 100% message image corupted only solution is that pof create jumpspl pach that work from dos without activesync this can help me and many other i will donate with paypal if somebody can creat this that work in hermes......
............again harmes how to unbrick 2.03
Many people try to unbrick spl 2.03 stack in boot no gsm and kitl mode and can not boot os just led light when power up...can go in bootloader bat this is all!!!.
I speak with imei-check abaout this and they told me that can repair this and it will cost 60pounds+ Here is message from imei-check.co.uk to me Hello,
You must send the device to us. The cost is 60 GBP + 15 gbp postage fee to return it back to you (or 7 GBP if we send it back to a UK address). In the day we receive it, we fix it, and next working day we send it back to you.
If you want to go ahead, please send the device + battery
(i think just need to open temporaly cid unlock in spl and this will help i mean from dos prompt,blank screen+ then flash??)and i must sent from Europe Union country .I live in Serbia and think that solution to unbrick hermes existed bat not want to tell many people......?? I will work in this now and i hope that solution will be for free when fix this.. I unbrick many hermes.artemis...etc..in Serbia bat this solution to unbrick hermes with spl 2.03 temporaly can not not have time to try?. I now will try many solution and will post here when fix this,you can trust me??....
If somebody else create solution before me please sent me message to know??
Do not post any solution from this site i try all and not work(SD card will not work when cid locked,hard spl-not work always 100% then message image corrupted,No kitl.....so please only original solution not from xda-developers..etc.
thanks for all.
Pozdrav zemljacima iz Srbije.
Pozdrav,
Ima nas prilicno sa SPL 2.03...
Igor
gsmhackerns said:
Many people try to unbrick spl 2.03 stack in boot no gsm and kitl mode and can not boot os just led light when power up...can go in bootloader bat this is all!!!.
I speak with imei-check abaout this and they told me that can repair this and it will cost 60pounds+ Here is message from imei-check.co.uk to me Hello,
You must send the device to us. The cost is 60 GBP + 15 gbp postage fee to return it back to you (or 7 GBP if we send it back to a UK address). In the day we receive it, we fix it, and next working day we send it back to you.
If you want to go ahead, please send the device + battery
(i think just need to open temporaly cid unlock in spl and this will help i mean from dos prompt,blank screen+ then flash??)and i must sent from Europe Union country .I live in Serbia and think that solution to unbrick hermes existed bat not want to tell many people......?? I will work in this now and i hope that solution will be for free when fix this.. I unbrick many hermes.artemis...etc..in Serbia bat this solution to unbrick hermes with spl 2.03 temporaly can not not have time to try?. I now will try many solution and will post here when fix this,you can trust me??....
....
Click to expand...
Click to collapse
Glad to hear that.
I am sure that the sulotion for spl 2.03 exists, but we don't know where to find it.
BTW, where is POF & olipro????
I made some progress, it stuck at OS screen now. It booted os several times today, it is strange that it can boot OS it is IPL 1.04 SPL 2.03. Stil NoGSM
koorosh_bsboys can you hermes boot OS?
Can NoGSM problem be solved with Flashing from SD Card?
igord said:
I made some progress, it stuck at OS screen now. It booted os several times today, it is strange that it can boot OS it is IPL 1.04 SPL 2.03. Stil NoGSM
koorosh_bsboys can you hermes boot OS?
Can NoGSM problem be solved with Flashing from SD Card?
Click to expand...
Click to collapse
My hermes can't boot into OS. It has stucked on 2nd splash screen (Imate telstra logo) not the OS logo!
How can u boot into OS?
If you find something new then share it with us.
My HERMES sometimes stuck at second boot scree and sometimes at windows screen, but few times it booted os. Than I put SSPL at microSD, becouse it stuck after few sec when it is on USB. OS is working ok - then I killed it again to SPL 2.03 and today get it back to working OS, No GSM.
What I did to get working OS???
1. Get battery out for about a day.
2. Put the battery in, DON'T POWER ON!!!
3. Do a HARD RESET.
If it don't work try several times.
I need your help
My tytn is bricked
The Bootloader shows me HERM200 IPL-1.01 (White font, Red line)
HERM200 MFG SPL-1.01 (Yellow font) Redline)
I cant connect with my active sync anymore
The OS do not boot anymore
It shows my "no gsm"
It freezed by Windows Mobile Screen !
What can i do ?
Can anybody repair it ?
My english ist so bad, i come from Germany. SRY
I hope anybody can help me
Freeheld
press these buttons together: side ok button, power button and reset button,
then the HTC will go in USB mode and use some rom to flash it
thx for ur answer
when i try to flash it says me Error connecting
actice sync doesnt find my Tytn no conection
the tytn goes to the grey flash screen and interrupt it
can anybody tell my the right ROMs ?
i need a german roms and german radio rom
i have found my bricked Type
SPL HTC_BOOT Boot OS? No GSM? KITL
1.01MFG <=0107 No Yes ---
Diagnostic
bricked while flashing radio
Solution
Flash any type2 radio in NBF format, run RUU 2 times. If that doesn’t work, flash the radio using HERMflasher
i cant find "type2 radio roms in NBF format"
How i can see my HTC_BOOT ?
I crashed my tytn so hard
A new problem
Microsoft ActiveSync cannot recognize this device for one reason:
*The device was not connected properly.
.
.
.
And so one
How i can flash an new right ROM ?
You can flash from the SD-Card:
http://wiki.xda-developers.com/index.php?pagename=Hermes_SDCardFlashing
Here are the radio ROMs:
http://wiki.xda-developers.com/index.php?pagename=Hermes_ExtractedRadioRoms
Thx but it doenst worked
i get an error
Loading...
than cant find file
but i renamed it write ???
how i can see that i have hardSPL
i dont beleave that i have it
and i cant install it because my activsync doenst work
If you're using XP - untick "Allow USB Connections" in activesync on pc. Put Hermes into bootloader and run the flash for Hard SPL V7. If this works then try an sd card flash for a different rom. No guarantees it will work but at this point, what have you got to loose?
Good Luck...
it doesnt work very well
i get an UPDATE ERROR
hmmmm
active sync is unticked (USB)
i have found a problem
i had flasched the bootloader 1.01MFG without SuperCID now i get Level= FF in mtty.exe, so i can flash back to 1.04 to install HARD SPL
How can i come back to 1.04 ?