Change PagePool size using ActiveSync - JAMin, XDA Neo, S200 ROM Development

if you want to test it then please backup first using backup.bat and restore by restore.bat if you have errors, then softreset
no need to hard reset or install new Rom, just soft rest
please use this at your own risk, don't do it unless you know what it is
first install EnableRapi.cab I'll attach it
in shortcut, this will change the memory for youlike this:
4mb pool.bat will make the total memory 52mb
6mb pool.bat will make the total memory 50mb
8mb pool.bat will make the total memory 48mb
12mb pool.bat will make the total memory 44mb the official.
it will take only few seconds, 1 or 2 seconds
only now softreset no need to hardrest or format
you may backup the old byte by backup.bat and restore by restore.bat
please don't blame me if you do anything wrong
and just wish me best of luck if this works for you as I
copyright to me

---

this realy works
I tryed first 12 MB and blicked my eyse 2 time and did a SR and my 8MB version was 12 MB Page pool ( not verry good for My Prophet Touch) to litle free memory
then tried the 6MB and blinked agen 2 times and SR now my 12 MB version was 6MB ..... I'm amazed this is pure rocket sience
6 MB is proberble best choic I think
this defently works
Thanks paradis_pal

---

where is the best of luck
hope some one make sticky

---

I have added link to this thread in first post of the Prophet Touch thread
And yes this should be sticky
and thanks again I love this

---

Unbelievable!!!!! Too fast!!! 1 second!! only takes 1 second to change pp from 8m to 6m!! Thank you so very mcuh! Mr, Paradis_pal!
about time to check how many ms are best for me^^

---

paradis_pal said:
where is the best of luck
hope some one make sticky
Click to expand...
Click to collapse
good work,
well , can u do the same for WM5 ?
then ur sticky will be complete

---

I already did one for WM5 see my signature

---

Hi
Sounds great - but can you be more specific in how to do it? Step-by-step.....
That would be helpful.
Thanks

---

paradis_pal i've a question for you..does it works also under Vista? or i need to use XP?
..by the way...this is a great step!

---

PPCBANDIT said:
Hi
Sounds great - but can you be more specific in how to do it? Step-by-step.....
That would be helpful.
Thanks
Click to expand...
Click to collapse
it is realy eacy to use
copy cab (EnableRapi.cab)to the phone or use some app that can install cab trough active sync
install it on phone
then extract the other rar into some folder on pc
then sync your phone with .... run the mb pool.bat that you want ...
wait 2 seconds and do a softrest now you have the page pool you want

---

lightman3dd said:
paradis_pal i've a question for you..does it works also under Vista? or i need to use XP?
..by the way...this is a great step!
Click to expand...
Click to collapse
I just did (installing under Vista), no problem.

---

why there is no 10mb pagepool???

---

Just tested on a wizard and works great! thanks paradis_pal

---

Easy and quick! Thanks a lot!

---

does this work on all wm5/wm6 phones? regardless of make?

---

hiho,
really nize work !!!! thx
tested this with 10MB -> 46MB free ram. works great
may we can use a batch like this for a complete automated proccess ?? ;-)
Code:
@echo off
@echo off
cls
ECHO ***********************************************************************
ECHO * change poolsize to 10MB -> *
ECHO ***********************************************************************
pause
ECHO Start Time: %TIME%
@set /P dummy="Initializing"<NUL
cecopy EnableRapi.cab dev:\ >NUL
@set /P dummy="."<NUL
sleep4
@set /P dummy="."<NUL
sleep4
@set /P dummy="."<NUL
cerun.exe -b CE:\Windows\wceload.exe \EnableRapi.cab /noui >NUL
sleep4
pdocwrite 10.nb 0x37855A
Playsound.exe
Pause
changed the 10.nb with hexedit to "A0" . . .

---

can i use this with any wm6?

---

sure we may do that, I was busy and I did it fast at office, please see what I did write for EDward in the WM5 change pool, but install enablerapi for every change pool not necessary, we only need one bat file for install enablerapi.cab
10 mb, good, but I think we need only 8 or 6, my best is 6 mb
thanks so much I'll change it in the first post soon.

---

with respect 4 paradis
i moded it a little ;-)

---

zgi said:
can i use this with any wm6?
Click to expand...
Click to collapse
hi ZGI, you can usee it with any device with Rom 4.0.0.0, and someone test it for wizard and it works,
ut it is strange that all ask me about WM5 I did one from 2 weeks for wm5 and replies for it????????
but thank you all for nice comments and thanks Gullum for first test it