This is the last radio ROM that comes with the latest HTC WM6 ROM for FIN.
I extracted and packaged with CustomRUU, ready to install.
http://rapidshare.com/files/49730009/HermesRadio1.51.rar
Or
ftp://xdaupload:[email protected]/Hermes/HERM_Radio_Only_1.51.00.10_CustomRUU.rar
Be sure you have HardSPL 2.1 before you install this radio upgrade.
Thanks to xgyun for find it.
Regards.
Thanks man.... just back from my summer hols so I´ll start with flashing this! Gracias y saludos, Chris
christonge said:
Thanks man.... just back from my summer hols so I´ll start with flashing this! Gracias y saludos, Chris
Click to expand...
Click to collapse
Wellcome back, man... hope all was good in your hols
Saludos.
Great~~~!!!
First impressions are very good. Signal strength similar or better than 1.50 here around the house and my HSDPA data connection is noticeably faster... I post battery usage later after a day´s use...
Thx for the upload...will try it later, do you know sth about the BL of this Radio ROM?:..
Regards,
Primoz
Thx jcespi2005, it's good
Thanks, I will try this later today, already downloaded.
I can confirm this version WORKS with ROGERS in Toronto and from reading on another thread, seems OK with FIDO as well.
No missed calls, rings on first ring (unlike 1.46.00.00, 1.47.00.00, 1.48.00.00 and 1.50.00.00).
It seems that the versions that work for ROGERS all end in an .10 rather than the .00 of the ones listed above.
This radio is a keeper for me.
T-MOBILE USA - Looking good
On preliminary observation, good signal and one of the faster responses to incoming calls since the 1.41 radio.
More on battery life and cell switching in a day or two.
jcespi2005 said:
This is the last radio ROM that comes with the latest HTC WM6 ROM for FIN.
ftp://xda:[email protected]/Hermes/HERM_Radio_Only_1.51.00.10_CustomRUU.rar
Regards.
Click to expand...
Click to collapse
Cannot download from ftp.xda-developers.com. File does exist.
Works on T-Mobile UK.
Yet to see the pro's if any and will post back.
simon1219 said:
Cannot download from ftp.xda-developers.com. File does exist.
Click to expand...
Click to collapse
Sorry, i have corrected the link in the first post.
rmsa786 said:
Works on T-Mobile UK.
Yet to see the pro's if any and will post back.
Click to expand...
Click to collapse
And works with T-Mobile NL also..No problems yet..
Update: Works great when you call or sms & receive, BUT CANT USE UMTS, CANT INTERNET.
So Dutch folks, keep it by radio 1.50
It's so strange when I upgrde the this radio.
I can feel that the upgrade speed is appearing slow than anyother former version.
Some fans can't load hermes after upgrade and some can't see the new radio version in "device information". So... is anybody here has the same problem?And who can tell what is going wrong.
The best for now
Radio 1.51 it's a must have.
No more ring delay, at last the TyTN ring starts between the first and the second caller line tone..., like a real phone
HSDPA working very well
Bram87 said:
And works with T-Mobile NL also..No problems yet..
Update: Works great when you call or sms & receive, BUT CANT USE UMTS, CANT INTERNET.
So Dutch folks, keep it by radio 1.50
Click to expand...
Click to collapse
Works fine for me.
I have tested using GPRS only, and 3G with and without HSDPA, and works every time. Can sync with my exchange server using push mail, and navigate with Internet Explorer in all situations.
Seems a little better coverage than 1.50 for me, here with Orange Spain.
Regards.
Bram87 said:
And works with T-Mobile NL also..No problems yet..
Update: Works great when you call or sms & receive, BUT CANT USE UMTS, CANT INTERNET.
So Dutch folks, keep it by radio 1.50
Click to expand...
Click to collapse
on orange israel
i get the same HSDPA speeds with this radio 1.51 and with radio 1.50 ,
930-960 kbit/sec
and GPRS speeds 35-44 kbit/sec
Works for Dutch networks as well!!
Bram87 said:
And works with T-Mobile NL also..No problems yet..
Update: Works great when you call or sms & receive, BUT CANT USE UMTS, CANT INTERNET.
So Dutch folks, keep it by radio 1.50
Click to expand...
Click to collapse
Downloaded 1.51. works superbly. I am a dutch KPN user..HSDPA, UMTS, GPRS & GSM no probs so far... thnx all who made this possible!
hy
Working very Good on my htc tytn herm 100
signal strength is 1 bar more(20% increase)
Related
Hi,
I am with Vodafone New Zealand and it's weird enough that I can't receive any phone calls when I upgraded my radio rom to 1.43 or later.
I have tried 1.43, 1.46, 1.47, 1.48.... they just don't work.
However 1.40 and 1.41 work fine. I have been wanting to go for later versions since I need stronger signal.
I don't think I missed any steps during the radio upgrade process as I was following through the right instruction and I could flash it successfully with 1.40 and 1.41.
Are they anybody having the similar problem? Will there be any fixes or workaround to get the later vesions of radio to work?
I have tried this on the official Dopod WM6 and some Black roms with SPL2.10.
Please help!! Cheers =)
define "don't work"
Sorry about being not very clear. I was trying to say that I cannot not receive any incoming calls. And also the caller cannot hear the outgoing signal tones when ringing my phone The calls are just not coming through...
I may have run into a similar problem...
Using anything higher than 1.43, I wasn't getting all of my incoming calls. It may have to do with calls being denied when I have an active data connection... Either way, 1.47 and 1.48 both seem to present this problem for me.
I encountered that same problem in China mainland,
The solution is to update a new SIM from your operator,
Maybe you will spend a little money on it,
Most of people resolved that problem with this solution,
I will update my SIM at the price of RMB30,
But now I think no need because I am using 1.41,
It works well in China mainland,
Thers is no 3G sinagal in China mainland,
I think if you are in 2G, 2.5G or 2.75G network you can't tell the difference between radio 1.41, 1.43, 1.47 and 1.48.
that's all.
AikonCN said:
I encountered that same problem in China mainland,
The solution is to update a new SIM from your operator,
Maybe you will spend a little money on it,
Most of people resolved that problem with this solution,
I will update my SIM at the price of RMB30,
But now I think no need because I am using 1.41,
It works well in China mainland,
Thers is no 3G sinagal in China mainland,
I think if you are in 2G, 2.5G or 2.75G network you can't tell the difference between radio 1.41, 1.43, 1.47 and 1.48.
that's all.
Click to expand...
Click to collapse
Anybody try this method?
I pose the same problem here in Indonesia,nothing above 1.41 seems to work,the recipient couldnt hear my voice.Im reverting back to 1.41,hopefully everything will be fine.
Fantastic! Upgrading the sim card to the latest one solved my problem! Thanks for all you advices! Hope others can solve their issues! I am on 1.47 now and it's all good! cheers!!
please refer to:
http://wiki.xda-developers.com/index.php?pagename=Hermes_UpgradeProblems#problem7
AikonCN said:
I encountered that same problem in China mainland,
The solution is to update a new SIM from your operator,
Maybe you will spend a little money on it,
Most of people resolved that problem with this solution,
I will update my SIM at the price of RMB30,
But now I think no need because I am using 1.41,
It works well in China mainland,
Thers is no 3G sinagal in China mainland,
I think if you are in 2G, 2.5G or 2.75G network you can't tell the difference between radio 1.41, 1.43, 1.47 and 1.48.
that's all.
Click to expand...
Click to collapse
I'm in China now, and just change from my old Nokia 6100 and the old SIM card voltage etc. is not suitable for new devices.
This worked for my HTC P3600i - Thanks so much for the tip.
help
AikonCN said:
I encountered that same problem in China mainland,
The solution is to update a new SIM from your operator,
Maybe you will spend a little money on it,
Most of people resolved that problem with this solution,
I will update my SIM at the price of RMB30,
But now I think no need because I am using 1.41,
It works well in China mainland,
Thers is no 3G sinagal in China mainland,
I think if you are in 2G, 2.5G or 2.75G network you can't tell the difference between radio 1.41, 1.43, 1.47 and 1.48.
that's all.
Click to expand...
Click to collapse
hello i tried ti uptodate my v1605 from vodafone uk to wm6, all was ok till i tried to call or receive a call it is impossible. I have tried using different sim cards however the problem seems to be another. if someone can helpme or at least tell me how to return to wm5 and get again my mobile working..
Same Problem
Hello All Together,
I have nearly the same problem. My Tytn was clearly new (3 Days) and the network signs shows that there is network, but if i start to call it doesn´t work.
After the Hardreset comes the message "no GSM".
I have the newest SimCard in there, but the problem still there...
I need help...
Thanks
problem is the same
AikonCN said:
I encountered that same problem in China mainland,
The solution is to update a new SIM from your operator,
Maybe you will spend a little money on it,
Most of people resolved that problem with this solution,
I will update my SIM at the price of RMB30,
But now I think no need because I am using 1.41,
It works well in China mainland,
Thers is no 3G sinagal in China mainland,
I think if you are in 2G, 2.5G or 2.75G network you can't tell the difference between radio 1.41, 1.43, 1.47 and 1.48.
that's all.
Click to expand...
Click to collapse
as charlie said i Have exactly the same problem, I tried to update my mobile the same v1605 ( vodafone uk) unlocked from wm5 to wm6, i cannot receive any call sometimes it sends txt but it is very difficult. I have tried different sims but the problem still is there, so please if our friend charile11 or someone has found any solution. i will thanks.
blackpanther1 said:
as charlie said i Have exactly the same problem, I tried to update my mobile the same v1605 ( vodafone uk) unlocked from wm5 to wm6, i cannot receive any call sometimes it sends txt but it is very difficult. I have tried different sims but the problem still is there, so please if our friend charile11 or someone has found any solution. i will thanks.
Click to expand...
Click to collapse
I got the same problem..
I'm using T-Mobile MDA2, I have tried radios sinece 1.41 to 1.54, but I still have the terrible problem with my Phone.....
I flashed Dopod official rom and radio (everything.),but the problem is still there.
After a sleep, I found that system is stuck , so i restart the system, And I see NONE at GSM version part..!!!
Who can help me ?
harrybest said:
I got the same problem..
I'm using T-Mobile MDA2, I have tried radios sinece 1.41 to 1.54, but I still have the terrible problem with my Phone.....
I flashed Dopod official rom and radio (everything.),but the problem is still there.
After a sleep, I found that system is stuck , so i restart the system, And I see NONE at GSM version part..!!!
Who can help me ?
Click to expand...
Click to collapse
Out of interest - did this die (ie No GSM) while on Radio 1.54 or AFTER moving from 1.54 to another radio? Sounds suspiciously like sudden NO-GSM radio death syndrome stikes some more phones... see this thread about the problem and this thread about the warning that 1.54.xx radios appear to be a common factor in radio bricks in the UK, Germany and Netherlands that suddenly appear without warning.
Also, people please remember that higher radio versions do not necessarily mean "stronger" signals on your network (they don't magic up signals or make variable coverage better - they just handle the signal you DO have a little differently) and can in some circumstances introduce more issues than they fix. Finding a radio that works well with your network and your everyday location is better than constantly keeping the version numbers high
New radio 1.50.00.00 for Hermes available here:
Hermes_Radio_1.50.00.00_108.zip
Information about this radio version:
Radio version: 1.50.00.00
KMRX: 3.2.7020
HTC_BOOT: 0108
QC_BOOT: 0035
DATE1: 31/Oct/2006
DATE2: 17/Aug/2006
JNAND: 07.00.13 02/Nov/2006
Enjoy
thanks,upgrade now
Any complaints so far?
Thanks !! downloading now ..
Any news about it? 148 works great but always want to try something new
I am getting 3G signal almost all the time as before it was better then 141...148....will test all day tommorrow in differant spots where I usualy loose signals.
Thank you. Seems OK so far... How come this is only a GSM upgrade?
*EDIT* I don't notice any difference in reception between 1.50, 1.48, and 1.40.30... I'll have to see about battery differences.
Thanks pof
Flashed it and will see how it goes.
thanks pof,just flashing it.
oldominion said:
Thank you. Seems OK so far... How come this is only a GSM upgrade?
Click to expand...
Click to collapse
I believe it means that it is just radio? At least I got UMTS reception as well.
Testing it now, hope it's better than the 1.48 which caused me to lose several calls.
Repository
Please, can someone upload this to some rapidshare - there are many problems with FTP download on proxy in work. Thanks a lot!
waiting feedbacks......
Thanks POF. Flashing it now (85%).
Let you all know how it's working.
Remember all, please post your location and comments on radio 1.50.00.00 to help other outs on the locations.
Thanks.
thanks
S64
Can't receive calls,
China mainland.
Here in the Netherlands this version is working perfect. Get nice HSDPA connection. Wifi is working with WPA security.
All calls come in, only not when HSDPA connection is active. Had this problem also with previous versions 1.47 and earlier.
Hope it's also working fine for you too....
Anyone in Toronto try this yet? Have been having problems with radio's after 1.43 and missed calls with Rogers. Hopefully 1.50 resolves this issue.
I will not be able to test this myself until late today and will post results once done.
Quick question: Anyone know the origin of this release? Did it come from a specific carrier, as most do?
Thanks.
Bensat said:
Here in the Netherlands this version is working perfect. Get nice HSDPA connection. Wifi is working with WPA security.
All calls come in, only not when HSDPA connection is active. Had this problem also with previous versions 1.47 and earlier.
Click to expand...
Click to collapse
Same thing here in Italy with TIM phone company.
I think that the HDSPA problem is not a radio software fault, if i try to call my Tytn while i am on an HDSPA session, the tone from the phone company is not "free" or "busy", it is the one they use when a number is wrong or the line is absent or broken.
I will check the battery usage too.
Cheers
M
massimo729 said:
Same thing here in Italy with TIM phone company.
I think that the HDSPA problem is not a radio software fault, if i try to call my Tytn while i am on an HDSPA session, the tone from the phone company is not "free" or "busy", it is the one they use when a number is wrong or the line is absent or broken.
I will check the battery usage too.
Cheers
M
Click to expand...
Click to collapse
Silly question, If it is a GSM only upgrade, it wouldnt effect HDSPA?
Hey guys, I'm on the t-mobile network in The Netherlands and o be blunt, my reception sucks. I'm missing a lot of calls and sometime my phone doesn't even want to call the outside world. After pressing the sent butting is just waits, tries to connect and give a 0:00 time and then quits again.
I've tried a few different radio roms, the original that my phone was supplied with (can't remember which one, 1.41 1.48 and 1.50, but none of them seem the fix the problem. Is there anybody out there on the t-mobile network, preferrably in The Netherlands that has a Hermes and decent reception?
Help is very much appreciated
Meer info nodig, welke rom draait erop?
More info Please, bv. Rom?
I'm running latest Sleuth rom (3.1) with radio rom 1.47 and my reception is excellent!
Maybe something in your phone is broken?
Cheers,
HJ
Windkracht13 said:
Meer info nodig, welke rom draait erop?
More info Please, bv. Rom?
Click to expand...
Click to collapse
Thanks for the help, check my sig
Im running Black Majic, with Radio 1.50.00.10. I've had these problems as well with radio 1.41.00.10 and 1.48.00.10. By device is not superCID/Sim unlocked and I've got Olipro v7 running with IPl/SPL at 1.04/2.10
I'll try 1.47 when I get home tonight
Im running radio 1.50, works perfect! got problems with radio 1.48
No problems here, running with the latest Schap's 3.54 b and 1.50 Radio ROM
Reception is also excellent( ik heb een super ontvangst )
Lees said:
Hey guys, I'm on the t-mobile network in The Netherlands and o be blunt, my reception sucks. I'm missing a lot of calls and sometime my phone doesn't even want to call the outside world. After pressing the sent butting is just waits, tries to connect and give a 0:00 time and then quits again.
I've tried a few different radio roms, the original that my phone was supplied with (can't remember which one, 1.41 1.48 and 1.50, but none of them seem the fix the problem. Is there anybody out there on the t-mobile network, preferrably in The Netherlands that has a Hermes and decent reception?
Help is very much appreciated
Click to expand...
Click to collapse
Lees I am on the latest HTC WM6 ROM official and Radio 1.50 everything is perfect. Although I had the problems you describe a couple of months ago. It started one day and would not go away and did that inside and around the place I live. I decided to call T-Mobile and gues what they said that there was a problem with one of the Masts in my neghbourhood... They advised me to switch to GSM only for while and it took them about 3-4 weeks to fix the problem. So give them a call and see which masts are in your neughbourhood maybe one of them is on maintanance. And usually they take these kind of calls seriously. By me I even got a follow up call that they were still bussy fixing it. (het was een gedoe dat een mast weg moest want de contract met de gebouw eigenaar verlopen was dus ze zochten een nieuwe plek, kan gebeuren).
Well, I've tried 1.47 and I get a bad reception and missed calls as well. I think I have to do a complete reflash (OS as well) and then see what happens.
I'm from Belgium and I am often in the Netherlands for business. No problems whatsoever with Black Majik and radio 1.50.00.00. No missed calls and good reception.
Read my signature.
I've tried all possible combinations. Info below is probably the fastest an most reliable combination.
Only I have KPN as provider......
Churchill said:
They advised me to switch to GSM only for while
Click to expand...
Click to collapse
how do you switch it to gsm only?
oh im on t-mobile UK and have all the same issues!
Lees said:
Well, I've tried 1.47 and I get a bad reception and missed calls as well. I think I have to do a complete reflash (OS as well) and then see what happens.
Click to expand...
Click to collapse
Lees have you called T-Mobile ?
Churchill said:
Lees have you called T-Mobile ?
Click to expand...
Click to collapse
Yeah i did, but they didn't know of any issues. I've also have a HTC Wizard and that work without any pronlems. My HTC Hermes problems or on different locations as well, so I think it's a problem with my phone.
I'll flash to the new Black ROM as soon as it's out and then see what happens
I am running Schaps 3.54B and Radio 1.50.00.00. and it's running perfectly.
Good reception and good battery life.
This is on a T-Mobile MDA Vario II
I am back to the 1.47 Radio rom, ( hier in Utrecht heb ik net 1 streepje meer umts ontvangst, vergeleken met de 1.50 die ik had )
For me is 1.47 better than the 1.50
I am on Tmob Netherlands. Never had a problem with the reception. I have tried several radios. Right now using 1.50. To be frank, cant tell the difference between this and the previous ones.
Wouter
For those wanting to upgrade only their radio I have uploaded the following RUU packages:
Radio 1.02.25.31 (Cingular)
Radio 1.02.25.19 (HTC)
Radio 1.02.25.11 (HTC)
Radio 1.01.25.16 (Cingular)
Each of the packages already contains an ROM updater which does not erase your phone, so your operating system and settings will remain intact.
Note: You need to have HardSPL before attempting to flash these!
Remember that flashing anything on your phone is always at your own risk.
I have updated my HTC Touch Pro to from Radio 1.02.25.19 to Radio 1.02.25.31 without any problems.
Update 1: Added Cingular Radio 1.01.25.16
THANK YOU now i try in my diamond
Do these radios work also on Diamond ?
They will not flash in your Diamond if your Diamond radio is security locked.
I would advise against flashing Raphael radio's in your Diamond, there is no reason to.
It could work because the chipset is the same, but why take the chance to brick your phone by flashing a radio which is not meant for it.
Do you see any improvement with .31 radio?
Tested it for about an hour or so now.
Can't say I noticed any difference, but I only tested it around the house. Reception around here is generally very bad and it seems to hold up nicely, so its definitely not worse then the previous radio.
GPRS, EDGE and HSPDA seem to work fine.
What about the Cingular one..? Anyone try this in the US to see if the 3g is now present..?
i flashed my touch pro with .31 and it went perfectly. In fact my US AT&T shows G. Not sure if that is the same as 3G but i am also at work where i have bad reception so that may play into it
as with the roms thread, the info is in the wiki pages already.
Although do keep discussion on the radio performance open
3g radio work in North America?
I bought the Diamond in the UK and haven't gotten anything but EDGE. Will any of the RADIO updates address this or is it a hardware problem ?
mallman said:
i flashed my touch pro with .31 and it went perfectly. In fact my US AT&T shows G. Not sure if that is the same as 3G but i am also at work where i have bad reception so that may play into it
Click to expand...
Click to collapse
I believe it should be showing and H icon..
darkvoid said:
Tested it for about an hour or so now.
Can't say I noticed any difference, but I only tested it around the house. Reception around here is generally very bad and it seems to hold up nicely, so its definitely not worse then the previous radio.
GPRS, EDGE and HSPDA seem to work fine.
Click to expand...
Click to collapse
Are you in the USA??? on ATT???
gatordent said:
Are you in the USA??? on ATT???
Click to expand...
Click to collapse
That's something I would like to know as well...
gatordent said:
Are you in the USA??? on ATT???
Click to expand...
Click to collapse
Nope, I'm in Europe (The Netherlands).
BoldFace said:
I believe it should be showing and H icon..
Click to expand...
Click to collapse
not in USA i dont think. my last 3g phone only showed 3g
i've tried to flash radio and it went 100% in 5 seconds. phone started but no radi was updated. any thoughts?
H is in fact in US...
mallman said:
not in USA i dont think. my last 3g phone only showed 3g
Click to expand...
Click to collapse
My TyTN II would show 3G most of the time in the Chicago area. It would switch to H whenever it was downloading. That's the ONLY THING I miss having now that I got the TP...Edge is too terribly slow to do anything but update the weather and my RSS feeds off hours (like at 3AM).
T
E
C
Can canadians use these 3g radio updates? I have a UK phone and i'm only getting EDGE right now
So what was decided about Diamond radios? I know the discussion was started but was there a conclusion? I like the radio on my diamond much better than .19 on the Pro.
TIA
Hey mixmaven, go read the other raphael radio thread, this was answered already!
http://forum.xda-developers.com/showpost.php?p=2568960&postcount=28
http://forum.xda-developers.com/showpost.php?p=2568960&postcount=35
-me
mixmaven said:
So what was decided about Diamond radios? I know the discussion was started but was there a conclusion? I like the radio on my diamond much better than .19 on the Pro.
TIA
Click to expand...
Click to collapse
Hi to all budding cooks!
I have links here - thanks to HTC e-Club Australia - for those who wish to download the original signed ROMS for three of the four Australian mobile network providers: Optus, Vodafone and 3 Mobile. Unfortunately the folks at HTC haven't seen fit to publicly release a Telstra-specific ROM for the Next-G network, or else I'd have a link here for that too.
The ROMs available from the links below include the radio in the package, and will install it along with the network-specific stuff for each provider.
Click on the link to start your direct-to-PC download:
Hutchison Telecoms - 3 Mobile (this is the latest one, released on December 4, 2008)
Optus and Vodafone Networks (this is the same one HTC released on October 27, 2008 - no other update for Optus/Vodafone available as of January 3, 2009)
Links also added to the Raphael Wiki Page
Hope these can be of help to someone.....
Thanks for these. Have you tested any of them
Optus / Vodafone ROM
OK I have flash to this rom and so far so good.
It's a fully unbranded rom. Not even the program shortcuts in touchflow have been inserted.
This upgrade has fixed a main problem of mms for me where I can now send and receive mms again. I could not do this with.405 WWE rom. Radio is the the stock radio and I have had not improvment here in AUS and will upgrade to .28 or .32 shortly.
No speed diffrence and you will need to redo your confiqs again or restore from backup
aussieak said:
Thanks for these. Have you tested any of them
Click to expand...
Click to collapse
Only the 3 Mobile and Optus ones, and both work well. Haven't tried the Telstra ones, 'cos I hate Telstra and everything they stand for. My only dislikes are the telco's brandings everywhere on the 3 Mobile ROM, other than that they run exactly like the stock HTC ROM.
As for the radio I'm using with Optus, it's 1.02.25.32, and here in Newcastle it's clear as crystal. Send/receive MMS is fine, and SMS goes on GSM like it always has with Optus.
djshotty said:
Only the 3 Mobile and Optus ones, and both work well. Haven't tried the Telstra ones, 'cos I hate Telstra and everything they stand for. My only dislikes are the telco's brandings everywhere on the 3 Mobile ROM, other than that they run exactly like the stock HTC ROM.
As for the radio I'm using with Optus, it's 1.02.25.32, and here in Newcastle it's clear as crystal. Send/receive MMS is fine, and SMS goes on GSM like it always has with Optus.
Click to expand...
Click to collapse
Great thanks. Yes I am using the Optus one as well and still on orignal radio and so far so good, only had issue restoring the backups would not reinstall the programs and settings which is a bit of a pain But the Rom feels faster after the settings applied then the orignal I had. I don't know why I could not get mms to work on orignal rom .405 I had all the correct settings and it would never send now it's like perfect again.
Will upgrade radio next as .19 always has some lagg in connecting to the network
The file name of Telstra rom seems like Diamond... I don't think Diamond and Raphael shares the same rom right?
katsuya82 said:
The file name of Telstra rom seems like Diamond... I don't think Diamond and Raphael shares the same rom right?
Click to expand...
Click to collapse
It is for the Touch Diamond, yes, you're right. Apologies, and all references to it are now removed.
any ideas if this rom works on a vodafone uk device?
robnewton1 said:
any ideas if this rom works on a vodafone uk device?
Click to expand...
Click to collapse
Not sure, mate. Seeming though I live in Australia, I haven't been able to set up my computer somewhere in the UK and get my hands on a Vodafone UK edition Raph to test it. Maybe you could test it yourself, see how it goes, and post your results here.
There's nothing to worry about. Only one of four things could happen, and all of them are reversible.
(1) The flash is a failure: you brick the phone. Elsewhere in this forum are threads committed to helping those with bricked phones;
(2) The flash is a success, but you don't like the look, feel and speed of the ROM post-install;
(3) The flash is a success, but the Radio/modem isn't working well for you on your particular network, or
(4) The flash is a success and the whole thing works to your satisfaction.
Trial and error is the key to advancement. You will get nowhere if you don't try, and you always have here a number of others with the same device, to help you out of a bind if you get stuck. Great minds think alike, and as Dr. Conrad Zimsky said in 'The Core', "That's all science is, is best guess..."
cheers mate, my only worry is bricking. im new to winmo so all the flashin is new to me.
robnewton1 said:
cheers mate, my only worry is bricking. im new to winmo so all the flashin is new to me.
Click to expand...
Click to collapse
I suggest first and foremost you go to the Raphael Elite Team Thread and grab the HardSPL from there. For further instructions on how not to brick your phone, check out this thread. If you haven't already, install ActiveSync 4.5 for Windows XP, or Mobile Device Center 6.1 for Vista. Make sure you download and install the correct version for your operating system, as there are 32- and 64-bit variants.
Connect your phone to your PC through whatever Sync application you installed, then Flash your phone with the HardSPL first. Trust me, I've done it myself and it works, as long as you follow the instructions the boys have left in a text file included in the *.zip's you'll grab from that thread. After that, it's all smooth sailing. Installation of ROM's from wherever you decide to grab them is a risk each time you do it, but make sure that if the ROM's chef has specified a certain Radio to use with what he's cooked, that you Flash that to your device first then hard-reset, then Flash the ROM.
Hope this has helped a little bit.....
hmmm i think i must be missing something. ive flashed hardspl no problem but i get an invalid vendor error when i try to flash the voda rom, i thought hardspl stopped that? maybe im just a noob missing something
robnewton1 said:
hmmm i think i must be missing something. ive flashed hardspl no problem but i get an invalid vendor error, i thought hardspl stopped that? maybe im just a noob missing something
Click to expand...
Click to collapse
Try going back to the original SPL that you can grab from the same place you got the unsigned from. Then try flashing with the Vodafone/Optus one I've posted links to @top of thread.
same error. everything back to stock & nothings bricked so no biggy. i wanted the radios more than anything because i get pretty sucky reception at home but vodafone say i shudnt. oh well, no harm done a least.
Thanks for your help.
Can anyone verify if the optus rom gives access to the WCMDA 900 band that we know the device is capable of? Cheers
Mrjasjam said:
Can anyone verify if the optus rom gives access to the WCMDA 900 band that we know the device is capable of? Cheers
Click to expand...
Click to collapse
As far as I am aware, the device flicks between whatever frequency is available. That is, if the 900MHz band is there, then it uses it, but when the 2100MHz band is around, it'll switch to that one. I was happy with that stock Optus ROM in my Raph, using my Optus SIM card, but have gone back to the T.I.R. (PDM) one simply 'cos I like it.
My Raph is an original outright device bought from 3 Mobile - with the 3 generic ROM installed - but because I jumped from a stock Vodafone service to Optus ('cos Vodafone here in Newcastle are not providing 3G/HSDPA) I chose a ROM I liked the look of.
djshotty said:
As far as I am aware, the device flicks between whatever frequency is available. That is, if the 900MHz band is there, then it uses it, but when the 2100MHz band is around, it'll switch to that one. I was happy with that stock Optus ROM in my Raph, using my Optus SIM card, but have gone back to the T.I.R. (PDM) one simply 'cos I like it.
My Raph is an original outright device bought from 3 Mobile - with the 3 generic ROM installed - but because I jumped from a stock Vodafone service to Optus ('cos Vodafone here in Newcastle are not providing 3G/HSDPA) I chose a ROM I liked the look of.
Click to expand...
Click to collapse
Hi there do you get the UMTS 900 band option in the band tab? My 3 rom only gives me 2100, 800, 850 options in UMTS and the usual GSM frequencies.
Mrjasjam said:
Hi there do you get the UMTS 900 band option in the band tab? My 3 rom only gives me 2100, 800, 850 options in UMTS and the usual GSM frequencies.
Click to expand...
Click to collapse
I just check out the Optus /Vodafone ROM and the the GSM/UTMS band options have dropped down to 2 options
Auto
UTMS (900+2100)+GSM(900+1800)
Netwrok type is
Auto
GSM
WCDMA
My settings are auto auto and get HSPDA all day in Canberra
aussieak said:
I just check out the Optus /Vodafone ROM and the the GSM/UTMS band options have dropped down to 2 options
Auto
UTMS (900+2100)+GSM(900+1800)
Netwrok type is
Auto
GSM
WCDMA
My settings are auto auto and get HSPDA all day in Canberra
Click to expand...
Click to collapse
Perfect! Thanks very much for the info.
Hi, this is an interesting discussion about band freq's here...
I'm running 1.02.25.19 with ROMeOS 1.21 WWE and I see the following options:
Auto
GSM(900+1800)+UMTS(2100)
GSM(1900+850)+UMTS(1900+850)
UMTS(2100+800)
I'm with Vodafone. I do not experience any call quality issues, slow call connection or internet speed issues... so I'm not too sure if this changes anything considering Vodafone mainly uses 1800 and they're still in the process of running out 900MHz.
FWIW... I tried running Radio 1.02.25.28 but I did experience issues with my camera, which is why I'm back on .19