Related
Obviously I'm a n00b I just got my 8525 yesterday, right away I upgraded to WM6 went all day today with it working fine, I installed a PockMSN and Windows Live anyways to keep it short I FIGURED I WOULD just RE-INSTALL Windows Mobile 6 to get a fresh phone (didnt know hard reset did the same) Actually it was the 3rd time I flashed the OS and RE-UPGRADED to WM6 to get a fresh phone!!!!
~heres the trouble~
In the middle of the reinstalling WM6 I accidentally reset my computer, didnt realize it right away and, got ERROR 260 I believe, anyways I followed the directions, took out the battery and reset, plugged the USB back and RAN the Offical WM6 Rom of HTC site again and it keeps getting stuck EVERYTIME at 11%, I have tried it like 10 times and it gets stuck at 11%, and I get the same ERROR. Says Communication error 260. I have tried everything I know reset the computer, changed USB cords, and Nothing, everytime it gets stuck at 11%!!!!!!
Any Ideas about how to get my 2 day old Hermes back??
(I know i did a n00bish thing and I am sorry)
same place everytime!!
I tried to reinstall Active Sync, changed USB cables, switched USB ports, nothing!! I keep getting ERROR 262 (thought it was 260 at 1st) and wont get past 11% says no connection. I do notice everytime i try this process, Active Sync isnt connected, but the Hermes is connected to the computer! Cause if it cant read the hermes it wouldnt be able to even start the update process. But 11% everytime its stops
nicknowsky said:
I tried to reinstall Active Sync, changed USB cables, switched USB ports, nothing!! I keep getting ERROR 262 (thought it was 260 at 1st) and wont get past 11% says no connection. I do notice everytime i try this process, Active Sync isnt connected, but the Hermes is connected to the computer! Cause if it cant read the hermes it wouldnt be able to even start the update process. But 11% everytime its stops
Click to expand...
Click to collapse
Perhaps you could try to flash using the sdcard method. So you would not be connected to a pc anymore. Who knows, it could solve your problem. I know one case where installing an official rom cured also a similar problem.
Quick summary of the sdcard method:
Use an empty sdcard formatted in FAT32
Copy the RUU_Signed.nbh file containing the OS to the card and rename it: hermimg.nbh
Enter bootloader mode (OK + POWER + Softreset). Normally, after the 3colors screen, you will get "Loading" followed by a description of what is on the card.
When ready, press power and... wait...
Good luck (The phone is NOT connected to the pc)
sounds good but I dont have a MicroSD card reader to do that. And I am using an Offical HTC WM6 ROM, thats all I ever used was the offical WM6 Rom from the AT&T site. Like I said, I was able to install WM6 already, but me being a complete idiot was Flashing the upgrade ROM to get the Hermes back to fresh phone factory settings. But I accidentally reset the computer in the middle of Flshing and since then I have never been able to get it to install again, everytime I turn on the phone I am stuck at the Tri-Color Screen, I am able to restart the upgrade process, but it stops at 11% says ERROR 262 and no connectivity!!
please anybody knows anything, this is the only thing I got, my mom got it for me! We cant afford to get a new one, or even fix it, it was a special present!
nicknowsky said:
please anybody knows anything, this is the only thing I got, my mom got it for me! We cant afford to get a new one, or even fix it, it was a special present!
Click to expand...
Click to collapse
Ok. I am a bit annoyed if you cannot try the sdflash method (BTW you can ask somebody having a PC to prepare the card for you.)
There are different things you can flash on your hermes. Radio, OS, Splash screens, Extended Rom,.... The most tricky thing is the radio rom as a failure there has a higher probability to brick your pda.
This is why i believe it is very dangerous to flash right away without some readings and understanding about what you do. i hope you had some experience here.
Did you first install hardspl (olipro 2.10 )? This is not mandatory but is a very good protection against bricking. (here the excellent guide of mrvanx: http://www.mrvanx.org/cms/index.php?option=com_content&task=view&id=30&Itemid=27 )
Did you flash also a radio rom? (Was it included in the "package" you wanted to flash?) If yes, i am a bit anxious that a stop at 11% is a problem... BUT, if you flashed a radio rom, it goes very, very, very... slowly. And gives the feeling that it freezes. For the "radio" part it is normal . I hope you did not stop the process too soon.
Once again, try the sdcard method. Or try to flash an official rom (most of the time containing a radio part...) and be patient. Can take till 25 minutes.
If this does not work, do not panic yet. Others had also problems before you: go there and start reading : http://forum.xda-developers.com/showthread.php?t=286755 and here http://wiki.xda-developers.com/index.php?pagename=Hermes_Unbrick
There is a hope to solve your problem. Good luck
Try to flash a radio ROM, turn the device on and if it stays at the bootloader screen (the tri colour screen) make a note of the version displayed. Hook up the device with USB cable, dont worry about activesync.
Download and unzip a radio ROM upgrade (try this one), run the exe, select your bootloader version on the screen....follow the screens through and see if it works.....radio roms take ages to flash so DO NOT disconnect your device.....if it doesnt work you most likely have a corrupted radio bootloader.............which is likely since the radio flash takes the longest ammount of time the reset probably occurred halfway through this.................unlucky
Give it a try though.
The lesson to learn here is to READ THRICE and flash once.....never ever disconnect your device out of impatience (which i suspect has happened many times on a radio flash) and be carefull these devices are expensive
mrvanx said:
The lesson to learn here is to READ THRICE and flash once.....never ever disconnect your device out of impatience (which i suspect has happened many times on a radio flash) and be carefull these devices are expensive
Click to expand...
Click to collapse
I could not say better
I know, the MicroSD method is nice, but when I got the phone the guy gave me a MicroSD card, but not the regular SD card to read it on computers ( i do have a card reader) Guys a super appreciate the replies> I am gonna try everything rite now, but real quick is my Hermes FUCT??? or is this error fixable??? It is just losing communication everytime at the exact same place, it just seems like something is fixable, but my sorry luck i cant get over the hump!! I will let ya'll know ASAP
okay, here is the thing, Every Hermes ROM update utility I have downloaded wont work, i start it and the VERIFY INFO ON HERMS windows appears about 2 minutes late I get ERROR 260 and it exits! Now when I use the OFFICAL WM6 upgrade ROM from the ATT/HTC site it seems to read the HERMES and wanna start the upgrade process, but thats where it ends at 11% No other RUU I have used or tried has even gotten that far, I just get ERROR 260 before it starts and I have to exit.
What it looks like is I cant communicate with my HERMES at ALL!! Active Sync wont see, only when I reset my computer and reset the HERMES and I plug it in a different USB port, it says Installing New Hardware and HTC USB something and then Hardware has installed and is now ready to use. But Active Sync wont recogniZe it
I'm sorry to tell you that but i think you ****ed up your phone and it is as useless as my ****ing jasjam.
please give us some detailed info s about your hermes like IPL SPL GSM STATUS....
When I am in Tri Color Mode I see.......
HERM100
IPL-1.04
HERM100
SPL-2.03
and SERIAL at bottom, then USB when I plug it in to my computer
I had upgraded to WM6 before on it, but me being a impulsive FOOL, i flashed it again to get me back to Factory Setting (didnt know HARD RESET did the same) and I accidentally RESET my computer in the middle of ROM Upgrading and ever since I cant get past 11% when I try to do it again (using the OFFICAL WM6 ROM from HTC)
and I cant get any communication with mtty although I dont know much about that app, I get a CANT load screen appear
is your phone KITL enabled.
hold the COMM manager button + POWER button + OK button (the one on the left side under the jog wheel) and reset with stylus.
if you see KITL dialogue then it is KITL enabled (MY bricked jasjam is KITL disabled)
if it is KITL enabled then read : http://wiki.xda-developers.com/index.php?pagename=PB_KITL_HERMES and your phone will be just fine.
if it is not then your phone is ****ed up just like mine
HA HA, me and my phone guy (well the guy who I bought my Hermes from) HAVE FOUND A FIX to get the phone outta Bootloader Mode and back into OS!! in my case WM6!! I have to do it 1 more time to fully confirm the method!!!!!!!! My friend is calling "SHOCKING THE PHONE" but not really shocking anything!! I am reluctant to share the method, but this site needs more people to actually HELP out others
nicknowsky said:
HA HA, me and my phone guy (well the guy who I bought my Hermes from) HAVE FOUND A FIX to get the phone outta Bootloader Mode and back into OS!! in my case WM6!! I have to do it 1 more time to fully confirm the method!!!!!!!! My friend is calling "SHOCKING THE PHONE" but not really shocking anything!! I am reluctant to share the method, but this site needs more people to actually HELP out others
Click to expand...
Click to collapse
Hey dude!
Would you kindly provide me the sulotion.
I would appreciate it.
nicknowsky said:
HA HA, me and my phone guy (well the guy who I bought my Hermes from) HAVE FOUND A FIX to get the phone outta Bootloader Mode and back into OS!! in my case WM6!! I have to do it 1 more time to fully confirm the method!!!!!!!! My friend is calling "SHOCKING THE PHONE" but not really shocking anything!! I am reluctant to share the method, but this site needs more people to actually HELP out others
Click to expand...
Click to collapse
Mmm... do i understand correctly your post? Are you hesitating to help others because your method is risky, or because you express some exasperation about people on this site? In this case, do not forget that all people here are exchanging ideas, questions etc on a totally free base without any obligation. In the limits of there knowledge. Encountering a problem after flashing a device is the only responsability of the user. We just try to help. But i prefer to believe that you found a method, still risky, that you need still to test
That said, it seems that there are an increasing number of hermes encountering a problem with the radio part. It seems that stopping a flash at 11% is a symptom of that. See some consolidation of those problems here: http://forum.xda-developers.com/showthread.php?t=349461
I hope you will find a solution for your problem and moreover i hope that none of you bought a hermes second hand with an already radio part problem. If so try always to get your money back...
I AM trying to confirm my method BEFORE i share it, because it might work on mine, and I dont wanna screw anyones hermes up more
nicknowsky said:
I AM trying to confirm my method BEFORE i share it, because it might work on mine, and I dont wanna screw anyones hermes up more
Click to expand...
Click to collapse
Why don't you answer my PMs????
Please tell me your sulotion and let me try that if you have any
So was following directions to upgrade to nuerom, and i accidently installed the old bootloader 1.2 (olipro), and so i then upgraded the ROM afterwards to the nuerom.
Well now my phone turns on and goes to the HTC screen but just sits there and does nothing.
Hard and soft reset don't change anything...what can i do?!
run the re-locker and then the 2.4 bootloader
you can find them both here
http://forum.ppcgeeks.com/showthread.php?t=9093
coffey_joshua said:
run the re-locker and then the 2.4 bootloader
you can find them both here
http://forum.ppcgeeks.com/showthread.php?t=9093
Click to expand...
Click to collapse
But it wont even connect via activesync, it just sits at the first screen you see whenever you boot your phone up...
TripFlex said:
But it wont even connect via activesync, it just sits at the first screen you see whenever you boot your phone up...
Click to expand...
Click to collapse
put it in bootloader mode first...hold down "Power Button" + "Camera Button" & press the "Reset Button" with stylus, and then try it...plus u dont have to be connected w/ activesync
no active sync
If you cant connect to active sync, open active sync on home pc go to conections and uncheck usb connection that helped me last night
rbadh91 said:
put it in bootloader mode first...hold down "Power Button" + "Camera Button" & press the "Reset Button" with stylus, and then try it...plus u dont have to be connected w/ activesync
Click to expand...
Click to collapse
if you follow his way it works but also
*please be cautious i'm new but i know my stuff*
your going to have to format the micoSD card to FAT32 with a MicroSD card reader or some type of MicroSD to SD converter(http://en.wikipedia.org/wiki/MicroSD)
(goto my computer/ right click the drive it was assigned to and click format... then under "file system" click on FAT32 then click format)
Download the rom update from HTC
Open the exe in WinRAR (rarlabs.com)
Find RUU_signed.nbh (it will be the biggest file)
extract it onto your desktop and rename it to TITAIMG.nbh
Move the file over to the formatted card and then insert it into phone.
Hold down "Power Button" + "Camera Button" & press the "Reset Button" with stylus
and done your phone should reconfigure back to how it would be "Virgin"
AtOMiiX
-CiiO kUrWa
same issue
I followed the format sd card directions, put in phone went to bootloader screen . BUT IT HAS BEEN DOWNLOADING FOR LIKE 15 MIN,
I guess my real question is did it freeze or should i let it keep going
Trying to flash from sd card Still in loading mode help
It is in loading mode for a half in hour is that normal
i have never used the sd card...bit i believe its gotta write about 50+mb of stuff to ur fone...it takes about 10 mins over usb2.0 (it doesnt really go to that speed) so i guess it can take that long
please post how long it took if it goes successful for others to know...thanks
I'm having the same problem here.
I ran the relocker, but it still says SPL-1.20.Olipro... I don't know why it didn't relock... what should I do, the SD option didn't seem to work either...
H'Roth-Gar said:
I'm having the same problem here.
I ran the relocker, but it still says SPL-1.20.Olipro... I don't know why it didn't relock... what should I do, the SD option didn't seem to work either...
Click to expand...
Click to collapse
i got it fixed...basically what you have to do is go into the bootloader like everyone said and then i reflashed it with the original rom...after that i learned that you have to run the radio in order to boot
it take 5-10 min its really fast... try it again or grab a different ROM
SD card Flashing wont work.
I Really Am stuck. Flashing did not seem to work left it in the downloading for over an hour, then gave up. (I was trying to update to DCD Titan 2.1.0, From Sprint 2.17.651.0, Radio Version 1.47.01 ORIGINALY gave me problem Stuck in htc black screen)
I wont connect activesync, or usb peroid, so I formatted SDcard to FAT32, put the Sprint 2.17.651.0.nbh file into the card renamed it TITAIMG.nbh, and tried to flash. (Loading screen for over an hour, then gave up)
Some else said somthing about flashin 3.16 because of radio issues.
(from going 2.17, to DCD 2.1.0) but I cant find 3.16.nbh. if anyone could Link me to it that would be cool.
ANTHING THAT COULD HELP ME UNBRICK MY MOGUL,PLEASE SEND
JonnyBoy313 said:
I Really Am stuck. Flashing did not seem to work left it in the downloading for over an hour, then gave up. (I was trying to update to DCD Titan 2.1.0, From Sprint 2.17.651.0, Radio Version 1.47.01 ORIGINALY gave me problem Stuck in htc black screen)
I wont connect activesync, or usb peroid, so I formatted SDcard to FAT32, put the Sprint 2.17.651.0.nbh file into the card renamed it TITAIMG.nbh, and tried to flash. (Loading screen for over an hour, then gave up)
Some else said somthing about flashin 3.16 because of radio issues.
(from going 2.17, to DCD 2.1.0) but I cant find 3.16.nbh. if anyone could Link me to it that would be cool.
ANTHING THAT COULD HELP ME UNBRICK MY MOGUL,PLEASE SEND
Click to expand...
Click to collapse
When you go into bootloader mode (power/camera/reset), what bootloader version is displayed on the screen? When you upgraded to the DCD ROM, did you also flash the new radio?
Can I add my dilemma to this thread? My Mogul also won't boot up. It gets to the yellow Sprint logo screen and then just shuts right back off.
I also, hard reset and that doesn't help. I can get to the bootloader screen but trying the Relocker means it wants my phone connected via Activesync (it calls for that in the DOS window that pops up), Activesync doesn't recognize the connection since the phone is in BL mode. Nothing I've tried so far has worked and some people on howardforums have tried to help and said I needed to install the radio only first and then go from there but I have had some trouble finding the original Radio as a download by itself.
Any takers on how I might be able to get this bad boy up and running again?
PS. I've also tried to install the original ROM found on the official HTC website and that didn't work either.
I appreicate if anyone can help both of us (the guy who posted the thread, too) out.
try extracting the relocker and then flash it.
Thanks guys this thread really helped me
s10onn2o said:
try extracting the relocker and then flash it.
Click to expand...
Click to collapse
If this is directed towards me, I extracted the relocker but I don't know what you mean by "flash it"
I thought flashing the ROM meant reinstalling a previous version or something. I've already tried running the relocker but like I said it requires an activesync connection but that doesn't work since I can only access R/G/B mode.
All the files inside the relocker are gibberish to me. Don't know what any of those things do separately.
TripFlex said:
i got it fixed...basically what you have to do is go into the bootloader like everyone said and then i reflashed it with the original rom...after that i learned that you have to run the radio in order to boot
Click to expand...
Click to collapse
Thanks, after pulling out my hair for a couple of hours, I finally was able to get it to work. The stock rom wouldn't flash at first for me, but I was able to get it to work on the third try... everything seems fine now...
willxcore said:
Can I add my dilemma to this thread? My Mogul also won't boot up. It gets to the yellow Sprint logo screen and then just shuts right back off.
I also, hard reset and that doesn't help. I can get to the bootloader screen but trying the Relocker means it wants my phone connected via Activesync (it calls for that in the DOS window that pops up), Activesync doesn't recognize the connection since the phone is in BL mode. Nothing I've tried so far has worked and some people on howardforums have tried to help and said I needed to install the radio only first and then go from there but I have had some trouble finding the original Radio as a download by itself.
Any takers on how I might be able to get this bad boy up and running again?
PS. I've also tried to install the original ROM found on the official HTC website and that didn't work either.
I appreicate if anyone can help both of us (the guy who posted the thread, too) out.
Click to expand...
Click to collapse
If you are in bootloader, try flashing the "unofficial leaked" ROM. NOT one of the custom ROMs based on it, but the complete leaked package; it includes compatible bootloader, radio, and ROM, and should get you back up and running. You should then be able to run the old relocker and the old official radio and ROM package if that is what you are trying to do.
http://forum.xda-developers.com/showthread.php?t=362403
I really screwed up.
I wanted to update my phone to the latest Energy version, and during the flashing process, absent-mindedly thinking about continuing the setup sitting at the couch (as opposed to the computer), I detached the phone.
Now, when I turn it on, it just says "Software update failed! Please try again.", but I cannot access the coloured bootloader.
If I try to update again (or even do task29) everything goes fine, till the progress bar appears, which is stuck at 0%.
I've tried running an original HTC firmware img from the card, but then I get the following error:
0028002
NOT ALLOW
Please help!
EDIT: After that, the bootloader appears, so I thought about trying a regular update then. When I do that, the update fails telling me the update file is corrupt.
Shaamaan said:
I really screwed up.
I wanted to update my phone to the latest Energy version, and during the flashing process, absent-mindedly thinking about continuing the setup sitting at the couch (as opposed to the computer), I detached the phone.
Now, when I turn it on, it just says "Software update failed! Please try again.", but I cannot access the coloured bootloader.
If I try to update again (or even do task29) everything goes fine, till the progress bar appears, which is stuck at 0%.
I've tried running an original HTC firmware img from the card, but then I get the following error:
0028002
NOT ALLOW
Please help!
EDIT: After that, the bootloader appears, so I thought about trying a regular update then. When I do that, the update fails telling me the update file is corrupt.
Click to expand...
Click to collapse
Hi,
I suppose you can put your HD2 in bootloader mode (three colour screen). If yes do task29 once again but with radio rom eg. 2.10.50.28_2. After that try to install different rom eg. omega, clarity etc.
Did you read my post?
I said it doesn't work. If I try to run task29 or anything, it WAS stuck at 0% endlessly.
I could only get to the bootloader when I tried to update from the card, and that failed too.
Now I can't enter the bootloader nor run any updates (they go to 1%, then report the updater is corrupt).
did u do HSPL?
i would double check
agent_47 said:
did u do HSPL?
i would double check
Click to expand...
Click to collapse
I already unlocked my phone before.
When I tried updating the original firmware from the card, that cleared the SPL, so now it seems to be the default. But when I tried to run HSPL now I get a wrong device code error.
Shaamaan said:
I already unlocked my phone before.
When I tried updating the original firmware from the card, that cleared the SPL, so now it seems to be the default. But when I tried to run HSPL now I get a wrong device code error.
Click to expand...
Click to collapse
unlocking is not the same thing as HSPL
updating stock ROM via sdcard will erase HSPL
go to bootloaded useing the volume key + power.
connect to USB and try and install the HSPL.
if it fails, try a different USB port\PC
if it still fails, can u post the text in tri color screen here
Sorry, when I meant "unlock" I meant the SPL thingy. I did not mean the carrier unlock, or whatever the technical term is.
Currently, I cannot access the bootloader at all.
Attempting to update with a freshly downloaded original HTC firmware gets the process stuck at 0%.
I managed to get to the bootloader...
It appears when I insert a card with LEOIMG, but it doesn't run the update from there, and appears to be STUCK at the bootloader (won't even show USB when the cable is connected).
Here's what it currently says:
HX-BC
SPL-2.08.0000 8G XE
MicroP(LED) 0x05
MicroP(TOUCH) 0x30
Currently, the phone refuses to update the firmware using the LEOIMG from the card (won't even show the question), and any attempt to flash it normally results in the phone being stuck at 0%.
Trying to install HSPL says "incorrect device ID".
Reformat the sd card with fat 32 or exfat put leoimg on there and press & hold volume down while turning phone on. Hope you get it working again....
Sent from my HD2 FroYo using the XDA app
dashrink said:
Reformat the sd card with fat 32 or exfat put leoimg on there and press & hold volume down while turning phone on. Hope you get it working again....
Sent from my HD2 FroYo using the XDA app
Click to expand...
Click to collapse
I just tried this; the phone shows the bootloader and something extra in the corner (I didn't notice what it was) and is now stuck on "Loading...".
EDIT: Trying exFAT didn't reach that point at all. It got stuck on the bootloader saying that the software update failed. FAT32 was the one that got stuck on Loading.
BTW, I hope I'm not just very impatient, but if after 5 minutes it's STILL 0%, then I'd say chances are, something is wrong.
EDIT 2: I fear that trying to update via the card or USB cable just won't work. As such, I pray there's a qualified support in my town, which can handle HTC phones and can brutally flash the software (as I reckon this is the only thing that can be done).
Shaamaan said:
I just tried this; the phone shows the bootloader and something extra in the corner (I didn't notice what it was) and is now stuck on "Loading...".
EDIT: Trying exFAT didn't reach that point at all. It got stuck on the bootloader saying that the software update failed. FAT32 was the one that got stuck on Loading.
BTW, I hope I'm not just very impatient, but if after 5 minutes it's STILL 0%, then I'd say chances are, something is wrong.
Click to expand...
Click to collapse
Hopefully it's not a hardware problem.
Find me on skype - pannet7. I can speak Polish.
Regards
Well, apparently HTC is rather unpopular in Poland... I found one place in my town (Poznań) where they were willing to give it a shot, but their HTC service technician is on vacation till Monday.
I can use the official warranty method, but that will take about a week, starting Monday as well.
If anyone has any more ideas, I'm all ears.
so... did yo manage to get it working ?
- just out of curiosity ..
AlCapone said:
so... did yo manage to get it working ?
- just out of curiosity ..
Click to expand...
Click to collapse
Same problem here, did you manage to get it working?
My phone's boot loader says SPL 1.42.0000XE. I have not upgraded to any custom rom since I bought the phone in Feb this year.
I decided to do a hard reset since the screen was frozen and soft reset did no good.
Hard reset was successful, but after that it landed on white screen and would not proceed.
I read some articles and downloaded a stock rom RUU_signed_0409.nbh from one of the links. I even copied it to the 8gb sd card that came with my phone. It does say that it is formatted as FAT 32. I renamed the file as leoimg.nbh, reset the phone and pressed the vol down key.
Now it shows the boot loader screen, then says "loading..." forever.
Please help! - By the way, I could never find a WWE version of 1.42.0000 SPL link to download.
i've got the same prob right now.
~ updated my phone with HSPL3 < all went well and finished OK
Phone is rebooting and working
~ now I want to try a different ROM and while installing it via
Active Sync it's giving an USB Error or this LOADING...
When trying to put the new ROM onto the SD Card with leoimg.nbh
it starts with LOADING...
....
I can reboot via removing battery and after that the phone boots up normal.
It's also working. But i can't do any flashes anymore.
*ADD! Error MSG
My PHONE DETAILS:
OS: 5.2.23134 (23134.5.3.9)
Manila: 2.4.20161332.0
ROM: ChuckyROM WWE 30/08/2010
Radio: 2.07.50.27_2
Protocol: 15.33.50.07u
HSPL before error: L2_RUN
HSPL during error: L3_PKG
no ideas?
I have the same problem... I just wanna update with the stock rom (latest). (no customs) . When trying via the pc, i get connection error. when i try via SD i stays on Loading. is there a solution for this ? thanks in advance
thejippen said:
I have the same problem... I just wanna update with the stock rom (latest). (no customs) . When trying via the pc, i get connection error. when i try via SD i stays on Loading. is there a solution for this ? thanks in advance
Click to expand...
Click to collapse
Yes; using the right stock ROM (the one from your aria)
or using GoldCard technique.
Put the HD2 into bootloader and then connect via usb. Run the flash file. This will only work if you are using a rom that your carrier supports as you have said you don't have HSPL...
have you solved the problem?
I cant solve this problem either, i´ve been looking for information on the internet the whole day.
Yesterday, i tried to flash my htc hd2 following a tutorial, and I used HSPL3(although I dont know if it really work, because my htc still says 2.08.0000 without the hspl, can somebody clarify this for me, please?), and after that I tried MTTY(Here starts my problem) just as the tutorial says, and then my htc restart, so I tried to flash it via the MicroSD card, but it stays stuck on a white screen which says "loading...", after that I tried to turn it up without the bootloader, but it stayed stuck on the logo screen.
Could somebody please help me???
I would really appreciate it.
denni2727 said:
I cant solve this problem either, i´ve been looking for information on the internet the whole day.
Yesterday, i tried to flash my htc hd2 following a tutorial, and I used HSPL3(although I dont know if it really work, because my htc still says 2.08.0000 without the hspl, can somebody clarify this for me, please?), and after that I tried MTTY(Here starts my problem) just as the tutorial says, and then my htc restart, so I tried to flash it via the MicroSD card, but it stays stuck on a white screen which says "loading...", after that I tried to turn it up without the bootloader, but it stayed stuck on the logo screen.
Could somebody please help me???
I would really appreciate it.
Click to expand...
Click to collapse
Two things I have learn;
If you install stock ROM over SD it will remove your HSPL.
And if you see 2.08.0000 spl on your bootscreen than the installation of HSPL was unsuccessful.
OMG...!
Thanks for the reply...
Soo what do you think i can do?
denni2727 said:
OMG...!
Thanks for the reply...
Soo what do you think i can do?
Click to expand...
Click to collapse
Hi,
Did you manage to fix the issue? Is your phone a branded one? The best way to go about is to find the stock ROM for your device and then flash it using the SD card method. This will update your ROM and SLP to stock. From there, you should be able to install HSPL and any custom ROMs.
Tazeem
Hey all, I am having trouble booting anything onto my HD2 everytime i boot the phone i get stuck on the (tri colour screen) "Hardspl" i think..
I am able to install original HTC roms and custom roms via USB and Serial but after i install them and it says installation complete when the phone restarts it just gets stuck on the "Hardspl" screen again??
Any help is appreciated thanks
Here are some images to help
http://img29.imageshack.us/g/dsc0007riq.jpg/
(UPDATED)
How do i remove hspl ive tried installing an offical rom from the SD card but i still boot into this screen ????
Try this........
Power off the phone (make sure your battery is over 50%)
Turn on while holding the vol. down button.
You should be at bootloader (three colour screen)
If you have HSPL installed you should see "cotulla" and "HSPL" on the bootloader somewhere.
If youve been flashing official roms though this may have uninstalled HSPL.
I couldnt get the screenshots you linked to...
You can attach image files using the "manage attachments" button down under the text entry area.. (i think)
Id suggest trying to flash a stock/official rom just now until you get up and running.
With the phone at bootloader you should see the word "serial" at the bottom of the screen....
Connect via USB and wait for "serial" to change to "USB", this could take a few minutes.......
When you see "usb" flash the ROM from your pc......
You should make sure that you have the correct ROM for your phone, go to the HTC site and pump in your serial number.
If you still have problems after this then post back here with any error messages you might get...
Hope that helps.....
Thanks for the reply, for the link you need to add (http ://) sorry i should have mentioned that
but i just finished doing what you told be and it finished installing. it had the HTC logo on phone with loading bar as on PC screen no errors :S but im still stuck on the tri colour screen
I originally had android booted onto this mobile but the 3G was not working so i tried installing the HTC wm 6.5 rom that I downloaded from the HTC website but it would not get out of the tri colour screen after i installed it.
So i though it may have been the hardspl its self so i updated the SLP from 2.05 to the 3.03 one im currently on but it does the same thing
Hmm ok...
So the flash finished all the wasy to 100% and there were no error messages..
then the phone rebooted and went to bootloader (3 colours)...??
Restarting the phone just keeps returning you to bootloader??
Try turning off then back on while holding down both volume buttons and see what happens.
Which model of HD2 do you have and which ROM did you flash??
Yes thats correct.
When i turn the device on wile holding vol up-down i get a grey screen to
"This operation will delete all your personal data, and reset all settings to manufacturer default. press vol up to restore or press any other keys to cancel"
and im not sure what HTC HD2 i have..
Model: T8585 ?
I flashed the latest rom from the HTC website using the S/N
"RUU_Leo_S_HKCSL_WWE_3.14.831.3_Radio_15.42.50.11U_2.15.50.14_LEO_S_Ship"
Okay, get to that screen and press volume up to continue, this will perform a hard reset which is recommended after a flash, your device should then boot up, may take a few minutes as its the first time..........
ok, It finished in like less then 10sec but there was not skips did from 1% - 100% smoothly and says "Restore....Completed Press VolUp to boot"
So i pressed volume up and once again stuck on the tri colour screen
any more suggestions or is my phone dead?
Hmmm
Phones not bricked because 95% of the time if you can get to bootloader the problem can be fixed........
I have the feeling this is something obvious that Im not picking up on.
Chances are someone else will see this and point out the obvious but at the minute I cant think why it might be doing that......
You could try flashing the ROM from SD card.
Rename the file on your PC to "leoimg.nbh" and put it on a 2gb/4gb sd card, turn the phone off, put the card in, turn on and it should flash........
Like I said, i dont think your phone is dead, I think Im missing something obvious....
its weird because i can install roms, hardspl's and all that stuff it knows the phone is there and installs them but for some reason it never gets passes the hardspl stage.. on each boot.
it accually boots into the tri colour screen in a split second of turning the phone on
Its a longshot but is there any possibility that your volume down button is stuck in the pressed position.........
yeah i have installed off the SD card already. that took awhile but it says everything is ok and installsion has completed.
same problem though once i restart tri-coloured screen pops up.
Im afraid Im not sure about this one...........
I'll keep thinking and let you know if anything occurs to me.....
Im sure someone else will chip in at some point and point out the issue though.
alright no worries thanks for the help and time hopefully someone knows what the problem is.
Maybe if i uninstall the Hardspl? might totally wreck it and 100% brick my phone if it fails but I think its the only option ill have left soon
uninstalling hspl shouldnt cause any harm........
I didnt realise you had HSPL installed, I take it you instaled that after flashing the stock rom??
If you have HSPL installed......
Try to install a custom rom, ie an energy rom, just as an experiment........
dunno if youve seen the images yet conan, but unless its changed since, the OP has 3.03.0000
also, if he has magldr installed ( i didnt see it mentioned, but..) when you hard reset it takes just a few seconds, because it is only hard resetting magldr (at least thats my understanding, and would offer a reason why hard reset is so quick)
I suspect incorrect 3,14 flash, which didnt complete so its returning to bootloader,
so, OP, bootloader - hspl4 - 3.03.hspl - flash your 3.13 rom again, over usb.
ok thanks ill try that right now, also yes magldr was installed for android but i thought I got rid of it once i rebooted the offical HTC rom.
If this works im donating $20 to you right away no joke .. ive been trying to fix for 13hours straight
Australian icon said:
ok thanks ill try that right now, also yes magldr was installed for android but i thought I got rid of it once i rebooted the offical HTC rom.
Click to expand...
Click to collapse
sd card flash, right?
Step 1 of the flash is the spl gets overwritten by the one in the leoing.nbh rom (3.03.0000 in this case) and then the phone reboots, and starts to flash , , splashscreen (where magldr is), radio, rom.
BUT, the phone wont allow the flash to start because hspl is now gone, so it fails CID checks and stops, so doesn't remove magldr, radio, rom, nothing, it just stops. Further attempts at flashing fail because you teh user haven't notived the spl change, you assume the whole flash failed, and that hspl is still there.
You shouldnt be able to get that far normaly, it would fail before it even starts, on a stock spl, except that hspl was there, so the flash was allowed to begin.
Ok, so its on SPL-3.03.HSPL now then I installed the latest HTC offical rom with USB but still no go
also if it is resetting magldr how come it doesent load up like it used to after a reset