Help!!! - new hd2 stuck at "loading..." while rom flash - HD2 Windows Mobile 6.5 Q&A, Help & Troubleshooting

My phone's boot loader says SPL 1.42.0000XE. I have not upgraded to any custom rom since I bought the phone in Feb this year.
I decided to do a hard reset since the screen was frozen and soft reset did no good.
Hard reset was successful, but after that it landed on white screen and would not proceed.
I read some articles and downloaded a stock rom RUU_signed_0409.nbh from one of the links. I even copied it to the 8gb sd card that came with my phone. It does say that it is formatted as FAT 32. I renamed the file as leoimg.nbh, reset the phone and pressed the vol down key.
Now it shows the boot loader screen, then says "loading..." forever.
Please help! - By the way, I could never find a WWE version of 1.42.0000 SPL link to download.

i've got the same prob right now.
~ updated my phone with HSPL3 < all went well and finished OK
Phone is rebooting and working
~ now I want to try a different ROM and while installing it via
Active Sync it's giving an USB Error or this LOADING...
When trying to put the new ROM onto the SD Card with leoimg.nbh
it starts with LOADING...
....
I can reboot via removing battery and after that the phone boots up normal.
It's also working. But i can't do any flashes anymore.
*ADD! Error MSG

My PHONE DETAILS:
OS: 5.2.23134 (23134.5.3.9)
Manila: 2.4.20161332.0
ROM: ChuckyROM WWE 30/08/2010
Radio: 2.07.50.27_2
Protocol: 15.33.50.07u
HSPL before error: L2_RUN
HSPL during error: L3_PKG

no ideas?

I have the same problem... I just wanna update with the stock rom (latest). (no customs) . When trying via the pc, i get connection error. when i try via SD i stays on Loading. is there a solution for this ? thanks in advance

thejippen said:
I have the same problem... I just wanna update with the stock rom (latest). (no customs) . When trying via the pc, i get connection error. when i try via SD i stays on Loading. is there a solution for this ? thanks in advance
Click to expand...
Click to collapse
Yes; using the right stock ROM (the one from your aria)
or using GoldCard technique.

Put the HD2 into bootloader and then connect via usb. Run the flash file. This will only work if you are using a rom that your carrier supports as you have said you don't have HSPL...

have you solved the problem?
I cant solve this problem either, i´ve been looking for information on the internet the whole day.
Yesterday, i tried to flash my htc hd2 following a tutorial, and I used HSPL3(although I dont know if it really work, because my htc still says 2.08.0000 without the hspl, can somebody clarify this for me, please?), and after that I tried MTTY(Here starts my problem) just as the tutorial says, and then my htc restart, so I tried to flash it via the MicroSD card, but it stays stuck on a white screen which says "loading...", after that I tried to turn it up without the bootloader, but it stayed stuck on the logo screen.
Could somebody please help me???
I would really appreciate it.

denni2727 said:
I cant solve this problem either, i´ve been looking for information on the internet the whole day.
Yesterday, i tried to flash my htc hd2 following a tutorial, and I used HSPL3(although I dont know if it really work, because my htc still says 2.08.0000 without the hspl, can somebody clarify this for me, please?), and after that I tried MTTY(Here starts my problem) just as the tutorial says, and then my htc restart, so I tried to flash it via the MicroSD card, but it stays stuck on a white screen which says "loading...", after that I tried to turn it up without the bootloader, but it stayed stuck on the logo screen.
Could somebody please help me???
I would really appreciate it.
Click to expand...
Click to collapse
Two things I have learn;
If you install stock ROM over SD it will remove your HSPL.
And if you see 2.08.0000 spl on your bootscreen than the installation of HSPL was unsuccessful.

OMG...!
Thanks for the reply...
Soo what do you think i can do?

denni2727 said:
OMG...!
Thanks for the reply...
Soo what do you think i can do?
Click to expand...
Click to collapse
Hi,
Did you manage to fix the issue? Is your phone a branded one? The best way to go about is to find the stock ROM for your device and then flash it using the SD card method. This will update your ROM and SLP to stock. From there, you should be able to install HSPL and any custom ROMs.
Tazeem

Related

HELP! Upgraded now mogul wont boot!

So was following directions to upgrade to nuerom, and i accidently installed the old bootloader 1.2 (olipro), and so i then upgraded the ROM afterwards to the nuerom.
Well now my phone turns on and goes to the HTC screen but just sits there and does nothing.
Hard and soft reset don't change anything...what can i do?!
run the re-locker and then the 2.4 bootloader
you can find them both here
http://forum.ppcgeeks.com/showthread.php?t=9093
coffey_joshua said:
run the re-locker and then the 2.4 bootloader
you can find them both here
http://forum.ppcgeeks.com/showthread.php?t=9093
Click to expand...
Click to collapse
But it wont even connect via activesync, it just sits at the first screen you see whenever you boot your phone up...
TripFlex said:
But it wont even connect via activesync, it just sits at the first screen you see whenever you boot your phone up...
Click to expand...
Click to collapse
put it in bootloader mode first...hold down "Power Button" + "Camera Button" & press the "Reset Button" with stylus, and then try it...plus u dont have to be connected w/ activesync
no active sync
If you cant connect to active sync, open active sync on home pc go to conections and uncheck usb connection that helped me last night
rbadh91 said:
put it in bootloader mode first...hold down "Power Button" + "Camera Button" & press the "Reset Button" with stylus, and then try it...plus u dont have to be connected w/ activesync
Click to expand...
Click to collapse
if you follow his way it works but also
*please be cautious i'm new but i know my stuff*
your going to have to format the micoSD card to FAT32 with a MicroSD card reader or some type of MicroSD to SD converter(http://en.wikipedia.org/wiki/MicroSD)
(goto my computer/ right click the drive it was assigned to and click format... then under "file system" click on FAT32 then click format)
Download the rom update from HTC
Open the exe in WinRAR (rarlabs.com)
Find RUU_signed.nbh (it will be the biggest file)
extract it onto your desktop and rename it to TITAIMG.nbh
Move the file over to the formatted card and then insert it into phone.
Hold down "Power Button" + "Camera Button" & press the "Reset Button" with stylus
and done your phone should reconfigure back to how it would be "Virgin"
AtOMiiX
-CiiO kUrWa
same issue
I followed the format sd card directions, put in phone went to bootloader screen . BUT IT HAS BEEN DOWNLOADING FOR LIKE 15 MIN,
I guess my real question is did it freeze or should i let it keep going
Trying to flash from sd card Still in loading mode help
It is in loading mode for a half in hour is that normal
i have never used the sd card...bit i believe its gotta write about 50+mb of stuff to ur fone...it takes about 10 mins over usb2.0 (it doesnt really go to that speed) so i guess it can take that long
please post how long it took if it goes successful for others to know...thanks
I'm having the same problem here.
I ran the relocker, but it still says SPL-1.20.Olipro... I don't know why it didn't relock... what should I do, the SD option didn't seem to work either...
H'Roth-Gar said:
I'm having the same problem here.
I ran the relocker, but it still says SPL-1.20.Olipro... I don't know why it didn't relock... what should I do, the SD option didn't seem to work either...
Click to expand...
Click to collapse
i got it fixed...basically what you have to do is go into the bootloader like everyone said and then i reflashed it with the original rom...after that i learned that you have to run the radio in order to boot
it take 5-10 min its really fast... try it again or grab a different ROM
SD card Flashing wont work.
I Really Am stuck. Flashing did not seem to work left it in the downloading for over an hour, then gave up. (I was trying to update to DCD Titan 2.1.0, From Sprint 2.17.651.0, Radio Version 1.47.01 ORIGINALY gave me problem Stuck in htc black screen)
I wont connect activesync, or usb peroid, so I formatted SDcard to FAT32, put the Sprint 2.17.651.0.nbh file into the card renamed it TITAIMG.nbh, and tried to flash. (Loading screen for over an hour, then gave up)
Some else said somthing about flashin 3.16 because of radio issues.
(from going 2.17, to DCD 2.1.0) but I cant find 3.16.nbh. if anyone could Link me to it that would be cool.
ANTHING THAT COULD HELP ME UNBRICK MY MOGUL,PLEASE SEND
JonnyBoy313 said:
I Really Am stuck. Flashing did not seem to work left it in the downloading for over an hour, then gave up. (I was trying to update to DCD Titan 2.1.0, From Sprint 2.17.651.0, Radio Version 1.47.01 ORIGINALY gave me problem Stuck in htc black screen)
I wont connect activesync, or usb peroid, so I formatted SDcard to FAT32, put the Sprint 2.17.651.0.nbh file into the card renamed it TITAIMG.nbh, and tried to flash. (Loading screen for over an hour, then gave up)
Some else said somthing about flashin 3.16 because of radio issues.
(from going 2.17, to DCD 2.1.0) but I cant find 3.16.nbh. if anyone could Link me to it that would be cool.
ANTHING THAT COULD HELP ME UNBRICK MY MOGUL,PLEASE SEND
Click to expand...
Click to collapse
When you go into bootloader mode (power/camera/reset), what bootloader version is displayed on the screen? When you upgraded to the DCD ROM, did you also flash the new radio?
Can I add my dilemma to this thread? My Mogul also won't boot up. It gets to the yellow Sprint logo screen and then just shuts right back off.
I also, hard reset and that doesn't help. I can get to the bootloader screen but trying the Relocker means it wants my phone connected via Activesync (it calls for that in the DOS window that pops up), Activesync doesn't recognize the connection since the phone is in BL mode. Nothing I've tried so far has worked and some people on howardforums have tried to help and said I needed to install the radio only first and then go from there but I have had some trouble finding the original Radio as a download by itself.
Any takers on how I might be able to get this bad boy up and running again?
PS. I've also tried to install the original ROM found on the official HTC website and that didn't work either.
I appreicate if anyone can help both of us (the guy who posted the thread, too) out.
try extracting the relocker and then flash it.
Thanks guys this thread really helped me
s10onn2o said:
try extracting the relocker and then flash it.
Click to expand...
Click to collapse
If this is directed towards me, I extracted the relocker but I don't know what you mean by "flash it"
I thought flashing the ROM meant reinstalling a previous version or something. I've already tried running the relocker but like I said it requires an activesync connection but that doesn't work since I can only access R/G/B mode.
All the files inside the relocker are gibberish to me. Don't know what any of those things do separately.
TripFlex said:
i got it fixed...basically what you have to do is go into the bootloader like everyone said and then i reflashed it with the original rom...after that i learned that you have to run the radio in order to boot
Click to expand...
Click to collapse
Thanks, after pulling out my hair for a couple of hours, I finally was able to get it to work. The stock rom wouldn't flash at first for me, but I was able to get it to work on the third try... everything seems fine now...
willxcore said:
Can I add my dilemma to this thread? My Mogul also won't boot up. It gets to the yellow Sprint logo screen and then just shuts right back off.
I also, hard reset and that doesn't help. I can get to the bootloader screen but trying the Relocker means it wants my phone connected via Activesync (it calls for that in the DOS window that pops up), Activesync doesn't recognize the connection since the phone is in BL mode. Nothing I've tried so far has worked and some people on howardforums have tried to help and said I needed to install the radio only first and then go from there but I have had some trouble finding the original Radio as a download by itself.
Any takers on how I might be able to get this bad boy up and running again?
PS. I've also tried to install the original ROM found on the official HTC website and that didn't work either.
I appreicate if anyone can help both of us (the guy who posted the thread, too) out.
Click to expand...
Click to collapse
If you are in bootloader, try flashing the "unofficial leaked" ROM. NOT one of the custom ROMs based on it, but the complete leaked package; it includes compatible bootloader, radio, and ROM, and should get you back up and running. You should then be able to run the old relocker and the old official radio and ROM package if that is what you are trying to do.
http://forum.xda-developers.com/showthread.php?t=362403

Help! Can`t flash my hermes!!!

Hi, I`m having some serious issues when trying to flash my HERMES. As far as I can tell, it is SIM Unlocked, but not sure if it`s CID unlocked. it`s SPL-1.06, and I can't seem to get it to install HARDSPL. I have tried, and tried and tried and tried. I've tried flashing VIA SD-CARD, but it just says "LOADING" and displays a number at the top, then goes back to the bootloader screen.
When I am flashing via the wizard, it'll go into the bootloader screen, and the wizard will fail saying it cannot connect "CONNECTION ERROR"...
I am at my wits ends, and cannot figure this out for the life of me. I have had 3 TYTN's now, and this one has gotten the better of me. I was able to flash both of my other TYTN's, but unfortunately I got the WSD, and cannot repair them, they are both beyond my technical knowledge of repairs...
PLEASE PLEASE PLEASE PLEASE PLEASE help....
Trying so hard to get this done...
Copied the .nbh (ren to hermimg.nbh) to my SDCARD and reset into bootloader, as I said, it just came up "LOADING" then back to bootloader....
I'd rip my hair out if I had any..
any help would be appreciated..
***UPDATE - I don't know what the hell happened, but suddenly, this bugger is letting me flash VIA SD. It's a damned miracle!
Just out of the blue, it asked me to flash via SD in the bootloader. Thank goodness! After 3 hours, I finally got it working..
Cheers all!
if you need more info, just ask, I will provide all I can....
need help ,during the upgrade it was around 15% that the upgrade utility show the error that device cannot connect.
my device is bricked now
IT is not KITL enabled
IPL 1.01
SPL 2.03
my device freezed at loading screen .
Now ,when i tried to rom upgrade in bootloader mode , using any ruu (ruuwraper,.....) it only shows 1% and my device reboots and ....
Edit/Delete Message
TVincent0621 said:
need help ,during the upgrade it was around 15% that the upgrade utility show the error that device cannot connect.
my device is bricked now
IT is not KITL enabled
IPL 1.01
SPL 2.03
my device freezed at loading screen .
Now ,when i tried to rom upgrade in bootloader mode , using any ruu (ruuwraper,.....) it only shows 1% and my device reboots and ....
Edit/Delete Message
Click to expand...
Click to collapse
Okay, when you're in the "bootloader" method, have you renamed the file that you're trying to flash "HERMIMG.NBH".
also, try to use the "stripped" AT&T ROM first, see if that'll help correct the issue.
Did you flash that first before you attempted to flash a different ROM on your Hermes? I've read in many different posts that it is highly suggested to flash that first then flash your ROM to your Hermes.
Should always flash via SD-Card, not recommending flashing via USB Wizard.
Try the "stripped" rom first, on a formatted (FAT32) microSD card, and see if that helps.
Cheers
i have download the "stripped" AT&T ROM ,it also the same ,when using USB method ,it stuck at 1% and my devide reboot .
when using SD card method ,it show (loading ...) about 2 second ,then it will back to tri-color mode there .
TVincent0621 said:
i have download the "stripped" AT&T ROM ,it also the same ,when using USB method ,it stuck at 1% and my devide reboot .
when using SD card method ,it show (loading ...) about 2 second ,then it will back to tri-color mode there .
Click to expand...
Click to collapse
I had that exact same problem.
I noticed that I hadn't named the file properly.
It's HERMIMG.NBH I kept putting in HERMING.NBH. It's kind of funny, but it's an easy mistake. When you boot with the "HERMIMG.NBH" it should flash. I used the HARDSPL V7, which can be downloaded at http://forum.xda-developers.com/showthread.php?t=296722, which is a "sticky" for this forum. Try flashing that one. Also, double check your .nbh file, make sure it's HERM IMG not HERM ING
That was the problem I was having too, it would just show "LOADING" and a bunch of numbers then drop to the bootloader... Then all of a sudden... "POOF" it worked, after I double checked the file and noticed my spelling error.
Now, if you have that fixed and still getting the error, it might be something else. I'm not sure how to exactly fix that, but as I said, mine was just a minor spelling error.. The exact spelling that I have, don't know if it is case sensitive, is "HERMIMG.nbh"
if it is case sensitive, that could also be a minor issue.
try it, if it works, then bingo, you're back in business, if not, then I'm not sure how else to fix it.
Cheers!
>.< ,now i type correct word "HERMIMG" ,it shown loading ... and (00068002) on the top of loading ... ,now it ,have better improvement ,it show loading ... for about 5 second only jump back to tri-color there ,izit this is the normal procedure ?
TVincent0621 said:
>.< ,now i type correct word "HERMIMG" ,it shown loading ... and (00068002) on the top of loading ... ,now it ,have better improvement ,it show loading ... for about 5 second only jump back to tri-color there ,izit this is the normal procedure ?
Click to expand...
Click to collapse
Okay, we're getting there. But still a long way off from it working as it should.
Okay, do you know if your phone is HARDSPL?
If you haven't already HARDSPL your phone, you should download that and try to flash that onto your phone.
Also sounds like it isn't SUPERCID. You'll have to CID unlock your phone, which is a good possibility as to why it isn't accepting other ROMS.
If your phone responds to the flash wizard when you download a ROM then get the SUPERCID and try to flash that one first, then move on to the HARDSPL.
For the SUPERCID, and my previous post has the HARDSPL.
At least the situation is improving, and your phone is starting to respond.
We'll get it working!
The HARDSPL you have to follow most of the "manual" installation instructions, and copy, then rename the "HermesUnlocker_v3a.nbh" file.
Try to flash that file, and we'll see if we can get it going.
Cheers
i think my phone not yet HARDSPL ,can you guide me to do this ?
i search the web ,it show me to here "http://forum.xda-developers.com/showthread.php?t=296722" izit correct ?
and also superCiD:
1. Unrar RUU_HERM_Unlock_v3a.exe
2. Unrar RUU_Inside.exe
3. Empty (erase the contents) of your microSD card from the Windows Mobile file explorer
or format it from your computer using a card reader (in some cases format doesn't work).
4. Rename HermesUnlocker_v3a.nbh to HERMIMG.nbh and copy it to the FAT32 formatted microSD card.
5. Insert microSD card on your phone
6. Transfer SSPL/SSPL-HERM.exe to your phone and run it
7. Confirm flashing on screen by pressing the power button.
how i wana do the step 6 ,my phone is stuck now ,i cant log in at all >< ,but i try step 1-5 ,it also shown the 00068002
TVincent0621 said:
i think my phone not yet HARDSPL ,can you guide me to do this ?
i search the web ,it show me to here "http://forum.xda-developers.com/showthread.php?t=296722" izit correct ?
and also superCiD:
1. Unrar RUU_HERM_Unlock_v3a.exe
2. Unrar RUU_Inside.exe
3. Empty (erase the contents) of your microSD card from the Windows Mobile file explorer
or format it from your computer using a card reader (in some cases format doesn't work).
4. Rename HermesUnlocker_v3a.nbh to HERMIMG.nbh and copy it to the FAT32 formatted microSD card.
5. Insert microSD card on your phone
6. Transfer SSPL/SSPL-HERM.exe to your phone and run it
7. Confirm flashing on screen by pressing the power button.
how i wana do the step 6 ,my phone is stuck now ,i cant log in at all >< ,but i try step 1-5 ,it also shown the 00068002
Click to expand...
Click to collapse
Attached is the HARDSPL file, already named "HERMIMG.nbh, which you just need to copy onto your SD-CARD.
When those are successful you will be able to flash any rom you want (provided it is as Hermes ROM)....
But as of right now, your phone is NOT bricked. It just currently has no ROM on it.
Have you tried to HARD-RESET your phone?
That's the two soft keys at the bottom of the phone, above the SEND and about the END keys.
Press and hold BOTH of those, then press the "RESET" button on the bottom of the phone. That'll hard-reset the phone.
I'm not saying to do that, just asking if you've tried that option yet.
Good luck, let me know how it's going.
Cheers!
my problem has solve now ,i try to install original rom for the phone ,it work ^^ ,thank for your help ,nice to meet you my friend from oversea .
Now i afraid to change any new rom >.<,can you guide me the best way to upgrade the rom ?so that i wont face the same problem and also brick my phone .
TVincent0621 said:
my problem has solve now ,i try to install original rom for the phone ,it work ^^ ,thank for your help ,nice to meet you my friend from oversea .
Now i afraid to change any new rom >.<,can you guide me the best way to upgrade the rom ?so that i wont face the same problem and also brick my phone .
Click to expand...
Click to collapse
Glad the problem was solved, and very happy to help!
Absolutely I can.
First thing is first, we have to SUPERCID unlock your phone, and we have to HARDSPL your phone.
Run the HARDSPL first, because the wizard will actually temporarily superCID your phone, so that you can install the HARDSPL, which will help prevent you from ever bricking your phone.
with your phone plugged in for activesync, you have to run the "autounlocker.bat" file in the SUPERCID. What this will do is make your phone accept other custom ROMS, whether it is from another carrier, or one of the ROMS that someone has developed on here.
After this, I would highly suggest, that if you ever flash your phone again with another ROM, do it the "SD-CARD" way. I'd only use the wizard to flash the HARDSPL and the SUPERCID.
Let me know how it goes.
Cheers!
Hehe ,My friend ,i had flash my phone with WM6.5 rom ,my device was Dopod838pro ,it is old device ,for my opinion WM6.5 not so suitable for my device ,but WM6.5 look amazing >.<
heh! Nice! Well sounds like your phone is now back amongst the living! That's good news! Hope you have many years of enjoyment with your phone!
Glad to have been of help for you!
Cheers
heh! Nice! Well sounds like your phone is now back amongst the living! That's good news! Hope you have many years of enjoyment with your phone!
Glad to have been of help for you!
Cheers
Do you have any must have application suggest me to install it ?
the memory for this new rom is low ,it decrease so fast ,with HTC clean ram i use ,it also the same ,it just save less then 1MB of ram ><
TVincent0621 said:
Do you have any must have application suggest me to install it ?
the memory for this new rom is low ,it decrease so fast ,with HTC clean ram i use ,it also the same ,it just save less then 1MB of ram ><
Click to expand...
Click to collapse
Unfortunately, no, I don't. You'd have to get a Vanilla, or a "lite/ultralite" rom. That's about the best I can suggest, unfortunately with the hermes, it does have a smaller ROM size, and limited RAM compared to the new, more up-to-date modern phones, like the 8925(Kaiser), or the new Tilt 2..
Cheers
TVincent0621 said:
Do you have any must have application suggest me to install it ?
the memory for this new rom is low ,it decrease so fast ,with HTC clean ram i use ,it also the same ,it just save less then 1MB of ram ><
Click to expand...
Click to collapse
Unfortunately, no, I don't. You'd have to get a Vanilla, or a "lite/ultralite" rom. That's about the best I can suggest, unfortunately with the hermes, it does have a smaller ROM size, and limited RAM compared to the new, more up-to-date modern phones, like the 8925(Kaiser), or the new Tilt 2..
Cheers
use the [Easy Hard-Spl v7 beta v0.1] by qwasde2
it,s really usefull i tryed it,s by me
it,s for win XP and vista and se7en users
i,am not joking here is the link
http://forum.xda-developers.com/showthread.php?p=5136858#post5136858
Hope you dont mind me reviving this thread as I also need your help
I tried flashing the MrDSL's WM6.5 ROM to my Hermes. Of course I followed the direction, I have Hard SPL (ever since Schaps rom) and stripped ATT flashed first.
However when I started flashing this rom, when I reached about 5% on the progress bar, I keep on getting Error. I followed the Recovery Steps and luckily I get the Tri-color mode and the process says Recovery successful. I then proceeded with the flashing but still getting errors, then recovery, then continue, then error again. Its been 10th try now.
Finally I canceled the update but I can only get the tri-color screen. Tried to Softreset as well as Hardreset but no go....my screen only gives me the Tri-color mode.
Any advice please....
thank you very much...
EDIT.....
problem solved sorry for that post.
what I did was:
1. flashed again the stripped ATT ROM....success!
2. flashed again MrDSL's WM6.5 titanium ROM (titanium)....success!
Dopod 838 Pro working again!
thanks again!!!
Bootloader shows but phone won't flash
Hey everyone,
I'm not new to
flashing my Hermes.
I'm just having an
issue I've never ran
into and can't figure
out. I would
appreciate some
assistance.
The strangest thing
is happening to me
while attempting to
flash from my
storage card. I put
the phone in
bootloader mode
and it takes
(IPL-1.04 /
SPL-2.10.olipro).
Then on the bottom
Serial shows and it
never goes to the
next step and ask
me do I want to
flash the new image.
I put the att original
on the 2gb storage
card over and over
and over and
renamed it
HERMIMG.nbh over
and over and over
and just am
flabbergasted. The
phone is not bricked,
it just refuses to
flash again.
Does anyone here
have any solutions
or suggestions?
PS - I have
formatted the card
to fat32 and I have
checked it for errors.
The HERMIMG.nbh
file is on the root of
the storage card.

I screwed up, flasing stuck at 0%; help!

I really screwed up.
I wanted to update my phone to the latest Energy version, and during the flashing process, absent-mindedly thinking about continuing the setup sitting at the couch (as opposed to the computer), I detached the phone.
Now, when I turn it on, it just says "Software update failed! Please try again.", but I cannot access the coloured bootloader.
If I try to update again (or even do task29) everything goes fine, till the progress bar appears, which is stuck at 0%.
I've tried running an original HTC firmware img from the card, but then I get the following error:
0028002
NOT ALLOW
Please help!
EDIT: After that, the bootloader appears, so I thought about trying a regular update then. When I do that, the update fails telling me the update file is corrupt.
Shaamaan said:
I really screwed up.
I wanted to update my phone to the latest Energy version, and during the flashing process, absent-mindedly thinking about continuing the setup sitting at the couch (as opposed to the computer), I detached the phone.
Now, when I turn it on, it just says "Software update failed! Please try again.", but I cannot access the coloured bootloader.
If I try to update again (or even do task29) everything goes fine, till the progress bar appears, which is stuck at 0%.
I've tried running an original HTC firmware img from the card, but then I get the following error:
0028002
NOT ALLOW
Please help!
EDIT: After that, the bootloader appears, so I thought about trying a regular update then. When I do that, the update fails telling me the update file is corrupt.
Click to expand...
Click to collapse
Hi,
I suppose you can put your HD2 in bootloader mode (three colour screen). If yes do task29 once again but with radio rom eg. 2.10.50.28_2. After that try to install different rom eg. omega, clarity etc.
Did you read my post?
I said it doesn't work. If I try to run task29 or anything, it WAS stuck at 0% endlessly.
I could only get to the bootloader when I tried to update from the card, and that failed too.
Now I can't enter the bootloader nor run any updates (they go to 1%, then report the updater is corrupt).
did u do HSPL?
i would double check
agent_47 said:
did u do HSPL?
i would double check
Click to expand...
Click to collapse
I already unlocked my phone before.
When I tried updating the original firmware from the card, that cleared the SPL, so now it seems to be the default. But when I tried to run HSPL now I get a wrong device code error.
Shaamaan said:
I already unlocked my phone before.
When I tried updating the original firmware from the card, that cleared the SPL, so now it seems to be the default. But when I tried to run HSPL now I get a wrong device code error.
Click to expand...
Click to collapse
unlocking is not the same thing as HSPL
updating stock ROM via sdcard will erase HSPL
go to bootloaded useing the volume key + power.
connect to USB and try and install the HSPL.
if it fails, try a different USB port\PC
if it still fails, can u post the text in tri color screen here
Sorry, when I meant "unlock" I meant the SPL thingy. I did not mean the carrier unlock, or whatever the technical term is.
Currently, I cannot access the bootloader at all.
Attempting to update with a freshly downloaded original HTC firmware gets the process stuck at 0%.
I managed to get to the bootloader...
It appears when I insert a card with LEOIMG, but it doesn't run the update from there, and appears to be STUCK at the bootloader (won't even show USB when the cable is connected).
Here's what it currently says:
HX-BC
SPL-2.08.0000 8G XE
MicroP(LED) 0x05
MicroP(TOUCH) 0x30
Currently, the phone refuses to update the firmware using the LEOIMG from the card (won't even show the question), and any attempt to flash it normally results in the phone being stuck at 0%.
Trying to install HSPL says "incorrect device ID".
Reformat the sd card with fat 32 or exfat put leoimg on there and press & hold volume down while turning phone on. Hope you get it working again....
Sent from my HD2 FroYo using the XDA app
dashrink said:
Reformat the sd card with fat 32 or exfat put leoimg on there and press & hold volume down while turning phone on. Hope you get it working again....
Sent from my HD2 FroYo using the XDA app
Click to expand...
Click to collapse
I just tried this; the phone shows the bootloader and something extra in the corner (I didn't notice what it was) and is now stuck on "Loading...".
EDIT: Trying exFAT didn't reach that point at all. It got stuck on the bootloader saying that the software update failed. FAT32 was the one that got stuck on Loading.
BTW, I hope I'm not just very impatient, but if after 5 minutes it's STILL 0%, then I'd say chances are, something is wrong.
EDIT 2: I fear that trying to update via the card or USB cable just won't work. As such, I pray there's a qualified support in my town, which can handle HTC phones and can brutally flash the software (as I reckon this is the only thing that can be done).
Shaamaan said:
I just tried this; the phone shows the bootloader and something extra in the corner (I didn't notice what it was) and is now stuck on "Loading...".
EDIT: Trying exFAT didn't reach that point at all. It got stuck on the bootloader saying that the software update failed. FAT32 was the one that got stuck on Loading.
BTW, I hope I'm not just very impatient, but if after 5 minutes it's STILL 0%, then I'd say chances are, something is wrong.
Click to expand...
Click to collapse
Hopefully it's not a hardware problem.
Find me on skype - pannet7. I can speak Polish.
Regards
Well, apparently HTC is rather unpopular in Poland... I found one place in my town (Poznań) where they were willing to give it a shot, but their HTC service technician is on vacation till Monday.
I can use the official warranty method, but that will take about a week, starting Monday as well.
If anyone has any more ideas, I'm all ears.
so... did yo manage to get it working ?
- just out of curiosity ..
AlCapone said:
so... did yo manage to get it working ?
- just out of curiosity ..
Click to expand...
Click to collapse
Same problem here, did you manage to get it working?

[Q] Rom upadting special error

Hi there,
I have some problems, which I cant solve using your forum.
So Im posting this.
Yesterday my Leo shut down and I couldnt turn on it. Today I've trided Hard Reset, but nothing was made. i can turn my phone on with white screen only. So i decided to reinstal ROM. I'v set up the bootloader and start installing oryginal ROM for HTC. And the installation is going to 1 % and then the phone stops instalation and turns on with white screen only.
What an I doing wrong?
looking for original firmware for your phone on htc.com, using the S / N
I have the same problem !!!
I've tried original from htc site, still the same.
If its important, when I'm installing, on the instalation Window, where should be written the current wersion of my soft, there's norlng, just empty place.
maybe I should do something like formating my htc or instal something other than ROM?
thx for help!
you could try to flash with sspl. maybe you have installed the 3.14 rom and removed the hspl.
tycz said:
I've tried original from htc site, still the same.
If its important, when I'm installing, on the instalation Window, where should be written the current wersion of my soft, there's norlng, just empty place.
maybe I should do something like formating my htc or instal something other than ROM?
thx for help!
Click to expand...
Click to collapse
1.try task 29(find on xda) and after that installing HSPL3.
2.after this flash any rom (including stock but i wouldn't recommend newest as we don't have newest hspl and you'll be stuck with, or you will have very small ram(50mb) if you keep older one)
I can't run task 29 from bootloader, the same problem as with ROM, it stops on 0%.
maybe some advices how to run task 29 on bootloader, maybe im doind sth wrong?
I think we have the same problems,
aktiv sync dont work, bootloader modus works,
cant find any solution in the forums,
i have tried flashing from pc and from sd card, no success
what about couple of hard resets on boot(hold down volume buttons) and perhaps try another computer or USB cable-if your friend has one newer etc...
i know from the times i had Omnia that RUU can have probs with computer also.
And have a look at this could help..
i tried all of your tipps but nothing works.
Hspl 2 and 3 do not work.
Here my bootloader information:
PB81100 HX-BC
SPL-1.42.HSPL XE
0x05
CotullaHSPL 0x30
Please help!
Did you update your ROM or Radio version? I read that white screen occurs due to incompatible Radio version.
Anyways, I screwed up my OS today by installing 'Gaz Touch Tools' and on reboot my phone showed some file was missing.. nothing was working.. phone wasn't responding well. couldn't even connect via activesync.. Right now installing Official ROM using MicroSD card.
Update in progress..
RADIO_V2 - OK
RCUST - OK
BOOTLOADER - OK
SPLASH1 - OK
OS -
CONFIGDATA -
EXTROM -
^ as the progress bar increases, the blank spaces change to OK
What I did - Formatted the MicroSD using FAT32, extracted the RUU_signed.nbh from the exe downloaded from HTC website and renamed it to LEOIMG.nbh and copied it on MicroSD card. Inserted card properly in device, started device by holding volume down button. Voila!
Update: Done installing, working fine!
Got the same problem with mine straight out if the box. SPL-1.42.0000
Charging light not working. Sometimes it goes in to bootloader when powering on and sometimes white screen with logo. I'm not impressed!

[Q] Bricked Trying to Revert to Stock WinMo

I think I may have bricked my OG HD2 (T8585) while trying to undo everything I had done to it, which was HSPL, MAGLDR and a NAND Android ROM.
It all started when I first tried to flash Kingdom's Sense 3.0 Gingerbread ROM. It told me to create a 340MB partition using HD2 Toolkit which I did. I then flashed the ROM as per the instructions, but it kept getting stuck on the boot logo so I decided to go back all the way to stock WinMo.
I downloaded a stock 1.66 ROM from HTC's website, tried to flash it via USB which failed because I obviously have no ActiveSync in Android. So I loaded the image onto my SD card and tried to flash by holding Vol Down and Power.
That was the first sign of trouble, about 1/10th during upgrade process it gave me some errors and rebooted to a black screen with a silver warning triangle.
Trying to go back into bootloader, I got the message about "upgrade ROM code error."
Since it had reverted back to SPL 1.42 I tried to reflash HSPL2 through USB, which worked fine, got the "We bricked it " message and everything. But then I tried to install MAGLDR and nothing, it fails even though it recognizes the USB connection.
So what can I do? On the one hand my device can accept and load HSPL2 and my computer is recogonizing the USB connection, but other than that nothing, it won't even turn on without being connected to external or USB power.
I also tried installing stock 1.43 ROM and that goes fine, it gives me an okay on everything but it gets stuck in the white HTC bootscreen in a loop.
I know I probably made a huge glaring mistaking to cause this, it's probably because I've bought a Transformer tablet and a Galaxy S2 in the last month so the steps regarding the HD2 were probably a bit of a blur. I guess the stock ROM probably included a radio that I wasn't supposed to flash, causing my device to be bricked.
But is there anyway I can get some type of OS working on this poor HD2 now?
She lives!!!
Okay, I'm not actually sure if the problem is solved but I'm back in WinMo 6.5 for the time being.
Since it had been off for a few hours I tried my luck again, plugged it into the wall and saw that it was stuck in the boot loop again. But I got distracted and left it, and when I came back it was on the orange WinMo setup screen.
Not sure what happened to make it go from not even getting power from the battery to working normally. But I see now my radio version is 2.05 which is massively old, I'm going to try and upgrade that first and see... hopefully it won't go back to being dead the moment I power down.
Shawn_230 said:
I think I may have bricked my OG HD2 (T8585) while trying to undo everything I had done to it, which was HSPL, MAGLDR and a NAND Android ROM.
It all started when I first tried to flash Kingdom's Sense 3.0 Gingerbread ROM. It told me to create a 340MB partition using HD2 Toolkit which I did. I then flashed the ROM as per the instructions, but it kept getting stuck on the boot logo so I decided to go back all the way to stock WinMo.
I downloaded a stock 1.66 ROM from HTC's website, tried to flash it via USB which failed because I obviously have no ActiveSync in Android. So I loaded the image onto my SD card and tried to flash by holding Vol Down and Power.
That was the first sign of trouble, about 1/10th during upgrade process it gave me some errors and rebooted to a black screen with a silver warning triangle.
Trying to go back into bootloader, I got the message about "upgrade ROM code error."
Since it had reverted back to SPL 1.42 I tried to reflash HSPL2 through USB, which worked fine, got the "We bricked it " message and everything. But then I tried to install MAGLDR and nothing, it fails even though it recognizes the USB connection.
So what can I do? On the one hand my device can accept and load HSPL2 and my computer is recogonizing the USB connection, but other than that nothing, it won't even turn on without being connected to external or USB power.
I also tried installing stock 1.43 ROM and that goes fine, it gives me an okay on everything but it gets stuck in the white HTC bootscreen in a loop.
I know I probably made a huge glaring mistaking to cause this, it's probably because I've bought a Transformer tablet and a Galaxy S2 in the last month so the steps regarding the HD2 were probably a bit of a blur. I guess the stock ROM probably included a radio that I wasn't supposed to flash, causing my device to be bricked.
But is there anyway I can get some type of OS working on this poor HD2 now?
Click to expand...
Click to collapse
I had pretty much the same problem as you, but mine is the tmobile us version. I tried flashing back winmo from android via sdcard method but i got an upgrade error. I tried flashing with microSD card sizes 8gb, 16,gb, and then 2gb which was recommended, but still no luck. I managed to connect the hd2 through usb on the tricolor screen and flashed back to hspl2.08 and magldr and cwm were still on. But i would like to still get back to winmo stock as if it came from tmobile.
My question is if i download the latest update from tmobile which is T-Mobile HD2 MR Software (Version 3.14.531.1), what is the correct spl i should have installed on the hd2 so that htc and tmobile wont know that i messed with the spl? is it 3.03? I was going to connect via USB on the tri color screen again, run the EXE and manually install the SPL? I just need to know which SPL to install after i run the latest winmo update. Please advise on the SPL and the method i'm going to take on reverting back to winmo. Thanks.
germotlp said:
I had pretty much the same problem as you, but mine is the tmobile us version. I tried flashing back winmo from android via sdcard method but i got an upgrade error. I tried flashing with microSD card sizes 8gb, 16,gb, and then 2gb which was recommended, but still no luck. I managed to connect the hd2 through usb on the tricolor screen and flashed back to hspl2.08 and magldr and cwm were still on. But i would like to still get back to winmo stock as if it came from tmobile.
My question is if i download the latest update from tmobile which is T-Mobile HD2 MR Software (Version 3.14.531.1), what is the correct spl i should have installed on the hd2 so that htc and tmobile wont know that i messed with the spl? is it 3.03? I was going to connect via USB on the tri color screen again, run the EXE and manually install the SPL? I just need to know which SPL to install after i run the latest winmo update. Please advise on the SPL and the method i'm going to take on reverting back to winmo. Thanks.
Click to expand...
Click to collapse
So it sounds like you lucked out, huh? So your HD2 works at least? I believe if you succesfully flash an official ROM like from T-Mobile, it will replace everything including the SPL back to stock - this is what I was trying to do by flashing official 1.43, to go back to factory mode.
I seem to be worse off than you though. I posted last night how my HD2 was back up running WinMo, but as suspected the moment I rebooted it was back stuck in the boot loop.
Any ideas? I wish I could get the HD2 working again so I could set it aside and get to playing with my new Galaxy S2.
This is driving me crazy now...
I managed to flash HSPL 2.08, and then MAGLDR 1.3, and then CWM recovery on top.
But this still seems bricked to me, still needs external power to turn on and I can't actually flash a working ROM... flashing a ROM via USB gives connection error and flashing via SD card goes fine but gets stuck in a boot loop.
What can I do at this point short of tossing the phone? I've tried stock 1.48, stock 1.66, a bunch of radios from 2.05 to 2.15... everything.
I am doing some research but the only results I find are T-Mo HD2s being bricked by the wrong radio. I have an original HD2 and I never flashed a radio intended for another HD2 model, so how is my phone so bricked all of a sudden?
All the threads I've found say if you can get into the bootloader then there's some hope but I doubt it because I can't successfully flash anything with it. I don't even know how I managed to get back into WinMo briefly last night... think my HD2 is probably just toast.
Okay, I finally solved my problems for sure - bent charging leads in the battery compartment!
Anyone having boot issues, take out your battery and look at the metal leads and you will probably find them bent out of shape. They are incredibly flexible, so just make them straight again and it will work. I assume it cuts external power briefly right before booting into WinMo, which is why it was rebooting constantly.
So I suppose for me this was a huge case of confusion, I got all confused with bootloaders and MAGLDRs when the problem wasn't even software related.
Shawn_230 said:
So it sounds like you lucked out, huh? So your HD2 works at least? I believe if you succesfully flash an official ROM like from T-Mobile, it will replace everything including the SPL back to stock - this is what I was trying to do by flashing official 1.43, to go back to factory mode.
I seem to be worse off than you though. I posted last night how my HD2 was back up running WinMo, but as suspected the moment I rebooted it was back stuck in the boot loop.
Any ideas? I wish I could get the HD2 working again so I could set it aside and get to playing with my new Galaxy S2.
Click to expand...
Click to collapse
The problem with my hd2 is the CPU is overheating thus causing it to freeze or lock up, and gets it annoying. After hours of searching on XDA, that's what seems to be the problem. I can't even talk on the phone for more than ten minutes or else locks up. So my idea was to get it back to winmo stock and see if it still locks up. If it does then i will probably try to send it back to HTC and see if they send another one maybe or fix it.
Ive had no luck luck flashing back to winmo from sdcard so i think i should try flashing back to winmo via usb on the tri color screen. Ive read on XDA that if you flash winmo via usb that it doesn't replace your SPL, and you have to run HSPL4 and flash it manually. I'm just not sure which SPL i should flash. I'm assuming 3.03 maybe?
What you could try is using an sdcard that is 2gb or less. Ive read that anything higher than 2gb will cause issues. I'm still a noobie at this rooting biz. Hope that helps.
germotlp said:
The problem with my hd2 is the CPU is overheating thus causing it to freeze or lock up, and gets it annoying. After hours of searching on XDA, that's what seems to be the problem. I can't even talk on the phone for more than ten minutes or else locks up. So my idea was to get it back to winmo stock and see if it still locks up. If it does then i will probably try to send it back to HTC and see if they send another one maybe or fix it.
Ive had no luck luck flashing back to winmo from sdcard so i think i should try flashing back to winmo via usb on the tri color screen. Ive read on XDA that if you flash winmo via usb that it doesn't replace your SPL, and you have to run HSPL4 and flash it manually. I'm just not sure which SPL i should flash. I'm assuming 3.03 maybe?
What you could try is using an sdcard that is 2gb or less. Ive read that anything higher than 2gb will cause issues. I'm still a noobie at this rooting biz. Hope that helps.
Click to expand...
Click to collapse
Which model HD2 do you have?
Find and download the stock ROM from this thread, get 1.66 since it will work with HSPL2 which is the latest HSPL that will work with MAGLDR (for Android and WinPhone7).
You can flash that through SD card and it will go back to total stock, including stock SPL. I assume you know how to pull the .nbh file from the ROM you download, so just rename to LEOIMG.nbh and put it on your SD card.
Go into the tri-color screen and it should flash fine and give you factory reset. This is where it wasn't working for me, but not because I had flashed the wrong ROM or something but because I had messed up the charging leads in the back while popping the battery in and out to reboot as I was flashing.
Man I downloaded 1.66 last nite and tried to flash back to winmo from android and its toast. Not sure what went wrong. Oh well.
Sent from my HTC Sensation 4G using XDA App

Categories

Resources