Help Help Wm6 Back To Wm5 - 8525, TyTN, MDA Vario II, JasJam Software Upgradin

Okay I have the AT&T 8525 running vp3 official unoffical WM6 rom. I want to go back to WM5 until the OFFICIAL comes out! I have the Official AT&T 8525 rom downloaded. Can I just click that ROM and let it downgrade it back to WM5 without doing all of that spl bootloading and other stuff I have no clue about. Thanks alot.

www.mrvanx.org Downgrade guide.

Okay
I guess I am stuck. I just downloaded the At&t rom and have my phone in the cradle to active sync and was going to click on the rom installer and go back. I don't understand all that other stuff on that page and I guess I am stuck with WM6. Thanks

robertscd said:
I guess I am stuck. I just downloaded the At&t rom and have my phone in the cradle to active sync and was going to click on the rom installer and go back. I don't understand all that other stuff on that page and I guess I am stuck with WM6. Thanks
Click to expand...
Click to collapse
Well, you are stuck if you cannot figure those other things out...
You cannot just simply flash the old over the new because the old rom (and it's built in upgrader) are performing checks that are failing.
Give me some details and I may be able to walk you through a simplified process.
What bootloader is on your phone?
What OS is on your PC?
Let's start there.

OKAY
Okay here is the information that I hope may help you.
The following is under Settings/About
Windows Mobile 6 Professional
CE OS 5.2.1437 (BUILD 17944.0.3.1)
The following is under Setting/Device Information
ROM version: 3.57.502.1
ROM date: 07/10/07
Radio version: 1.48.00.00
Protocol version: 32.81.7020.20H
This is what the other screen says when I hold the power and okay button and hit reset.
HERM100
IPL1.04
HERM100
SPL-2.03
Okay I hope that is what you requested and that is it and by the way, I want to go back to WM5 simply because I bought Delorme Street Atlas 2008 and it is not compatible with WM6 because it will not jive with the Bluetooth Gps setting in WM6. This just sucks. Thanks man and I hope this helps me. Thanks again.

robertscd said:
Okay here is the information that I hope may help you.
The following is under Settings/About
Windows Mobile 6 Professional
CE OS 5.2.1437 (BUILD 17944.0.3.1)
The following is under Setting/Device Information
ROM version: 3.57.502.1
ROM date: 07/10/07
Radio version: 1.48.00.00
Protocol version: 32.81.7020.20H
This is what the other screen says when I hold the power and okay button and hit reset.
HERM100
IPL1.04
HERM100
SPL-2.03
Okay I hope that is what you requested and that is it and by the way, I want to go back to WM5 simply because I bought Delorme Street Atlas 2008 and it is not compatible with WM6 because it will not jive with the Bluetooth Gps setting in WM6. This just sucks. Thanks man and I hope this helps me. Thanks again.
Click to expand...
Click to collapse
1. Unpack the ROM upgrade file using winrar.
2. You will get two files (an .nbh and an RUU.exe)
3. Download Olipro's custom_ruu application
4. Put ONLY the .nbh file from the unpacked ROM in a folder alone with Olipro's custom_ruu
5. Run the custom_ruu - should work.

Related

...not a valid Win32 application

Hi,
I'm trying to make my Vodafone 1605 VPA SuperCID, but when I run HERM_Unlock_v2a.exe I get a Windows error ...not a valid Win32 application.
I'm guessing this is something to do with my laptop hardware because I've had a problem loading other software due to the Due chip (Dell Latitude D820 - Centrino Duo etc).
Any advice appreciated - but be gentle with me 'cos I'm new to upgrading Windows mobile.
You actually copy that file onto your phone and run it from there, not the computer.
That should do the trick!
Thanks for quick reply - it shows how much I've got to learn!!!
Ran the file from my phone and got the "SUCCESS" message but when I checked using mtty.exe the phone still reports locked to vodafone.
I'll have a play and see what I come up with - hopefully not frying the phone in the process
ach2 said:
Ran the file from my phone and got the "SUCCESS" message but when I checked using mtty.exe the phone still reports locked to vodafone.
Click to expand...
Click to collapse
You _must_ be running the unlocker's patched radio 1.16 on your phone when you run HERM_Unlock_v2a.exe, otherwise it will report "SUCCESS" but do nothing.
Thanks Pof, but I don't know what to do next...
my bootloader screen shows IPL-1.00 and SPL-1.04.
My device info shows:
ROM version: 1.20.161.6
ROM date: 08/02/06
Radio version: 1.03.06.00
Protocol version: 32.34.7010.01W
I've read most of the WIKI (and even understood most of it) and also as many posts to this forum as I could.
Also, the 'available ROMs' page shows that this is the only ROM that Vodafone UK have produced and, bacause another poster has done the same thing with the same hardware and ROM I guessed I shouldn't have too much problem.
I think that as a beginner I must be doing something wrong or misunderstanding some of the lingo but would appreciate any more help which will get me away from the Vodafone ROM - and who knows, as I learn I may even be able to help some others later
Cheers, and thanks for all the informative posts
ach2 said:
my bootloader screen shows IPL-1.00 and SPL-1.04.
Radio version: 1.03.06.00
Click to expand...
Click to collapse
Follow instructions here, after flashing patched rom your radio version should show 1.16, then run HERM_Unlock_v2a.exe on your phone and wait the "success" message. After that you should be SuperCID, if not, read the unlocking thread... it has all been answered before.
OK, finally worked it out - all I had to do was RTFW - ALL of it, not just the parts I think are relevant.
Cheers for the help, I'm sure I'll screw up later and need more lelp but I've learned loads already...
Now trying to work out which ROM to use (except Vodafone) and hoping not to brick the phone in the process )

WM6 Upgrade Guide

How to upgrade from WM5 TO WM6
To upgrade your prophet to WM6 I recommend that you first of all downgrade to the NVID version of WM5 AKU2.2 and get the latest Active Sync:
1. Download the NVID(no vendor) AKU2.2 rom for WM5 here :http://rapidshare.com/files/17208693/RUU_Prophet_220734_2207114_024721_NVID.exe YOU CAN USE Step1 of PdaMobiz or PDAViet Temp INSTEAD OF NVID(no vendor) AKU2.2 ROM...
2. After it has been downloaded get the latest Active Sync from Microsoft.com
3. Install active sync, you might need to reboot
4. When your computer has rebooted, run the file from step No 1 . Follow the steps, remember that it can take some time and seem to stuck at 80% and higher, but just wait.
5. When you have done this, your pda will reboot. After it comes with the welcome to windows mobile screen,"Tap Here To Begin",JUST LEAVE IT. In fact don't touch your device before the next steps are finished.
6. Now download one of the WM6 versions( http://forum.xda-developers.com/showpost.php?p=1279985&postcount=1 )
7. Now find a file named Upgrade.bat,and run it.(you don't have to run Step1 of PdaMobiz or PDAViet Temp,as you have already downgraded to AKU2.2)
8. Wait until the upgrade finishes(usually takes 12-15minutes)..WAIT WAIT WAIT
9. A message will be displayed in the dos box,and it will say that the upgrade is finished etc....etc...,now you HAVE to HARD RESET,to finish the upgrade and enjoy you new WM6!
How to downgrade from WM6 TO WM5
The downgrade process from WM6 to WM5 is pretty simple. All you have to do is to downgrade to WM5 NVID and after that upgrade to the WM5 you want:
1. Download the NVID(no vendor) AKU 2.2 rom for WM5 here :http://rapidshare.com/files/17208693/RUU_Prophet_220734_2207114_024721_NVID.exeYOU CAN USE Step1 of PdaMobiz or PDAViet Temp INSTEAD OF NVID(no vendor) AKU2.2 ROM...
2. After it has been downloaded get the latest Active Sync from Microsoft.com.. Simply search for "Active Sync"
3. Install active sync, you might need to reboot
4. When your PC is ready run the NVID file you downloaded in step1 and follow the guide, remember that it can take some time and seem to stuck at 80% and higher, but just wait
5. When its done downgrading to the NVID WM5 rom, you prophet will reset and you can upgrade to the version of WM5 you want.
NOTICE
If you use a different AKU 2.2 ROM(like PDAViet Temp),you may have two EXEs in the folder you extracted.Be careful and use the one that is made for your device:
FILENAME G3.EXE
is for G3 devices:IPL x.xx.0000, SPL x.xx.000.0 (this is shown when you reset)
FILENAME G4.EXE
is for G4 devices:IPL x.xx.0001, SPL x.xx.000.1 (this is shown when you reset)
RECOVERING FROM ERROR IN STEP 8 WM5->WM6
1. Don't panic
2. Don't panic
3. Unplug the phone
4. Reset with stylus,and keep the Camera Button pressed.
5. A 3 color screen will appear(Bootloader Screen)
6. Connect your device with your PC,and run the NVID(no vendor) WM5 rom.
7. The device will be resetted after RUU(rom update utility)finishes
8. Repeat the WM6 upgrade,from STEP 5..
How to switch or upgrade/downgrade between WM6 versions(for example PDAViet->Trueneytral)
1. First you have to downgrade to WM5 AKU2.2 using the WM6->WM5 guide(some say that you don't have to do that,but i believe that it's better to downgrade first rather than making a simple overwrite)
2. Now follow STEP 5 of the WM5->WM6 guide
Device doesn't connect to PC after flash
If your device doesn't connect to your PC after flash,just enter bootloader(press camera button+while pressing soft reset and hold,until a tri-color screen shows up),and flash the NoVendor WM5 Rom: http://rapidshare.com/files/17208693/RUU_Prophet_220734_2207114_024721_NVID.exe .Then repeat the whole process...
----------------------------------------------------------
KEEP IN MIND:
UPGRADING CAN BE DANGEROUS,YOU ARE RESPONSIBLE FOR THE DAMAGE TO YOUR PHONE
DO NOT RESTORE BACKUPS FROM ANY ROM OTHER THAN THE ONE IT WAS CREATED ON
THERE IS NO "BEST WM6 ROM",THE BEST IS THE ONE THAT WORKS BEST FOR YOU
(part of the guide is taken from Da9L's guide,in the WM6 Rom Collection)
I will edit/update this post soon and clean it up, ask questions in another thread, and by god please read the wiki first, 90% of the questions asked are answered in the wiki....
WM6 Upgrade Guide...reply
great info sir! thanks so much! downloading...i'll be happy to send feedbacks on this WM6 ROM! thanks again!
Thanx a lot tonydeli7 , very very good guide and a lot of ppl really needed it
Great
Thanks to you all. I have Qtek S200 and trobuled with WM6 it wonderfull guide for me thank you very much.
I need to downgrade to WM5, 'couse I cannot boot anymore. After running the setup I get an error that the device cannot be found. I have connected the S200 with the boot loader running.
Edit: Now it works on an "old" WinXP machine.
Huge Problem!!
Ok guys I am having a huge problem. I tried to upgrade to WM6 but when running the RUU and changing the rom, it encountered an error saying the nbf file cannot be installed on my pda phone and now my phone is stuck(i think permanantly) on the bootloader screen.
No matter what I do to try to fix this, IE: restart device, power down by removing battery, try to run the RUU again, nothing helps. Its is really stuck and I really need this cell phone.
PLEASE HELP IF YOU CAN.
Dan.
dharvey4651 said:
Ok guys I am having a huge problem. I tried to upgrade to WM6 but when running the RUU and changing the rom, it encountered an error saying the nbf file cannot be installed on my pda phone and now my phone is stuck(i think permanantly) on the bootloader screen.
No matter what I do to try to fix this, IE: restart device, power down by removing battery, try to run the RUU again, nothing helps. Its is really stuck and I really need this cell phone.
PLEASE HELP IF YOU CAN.
Dan.
Click to expand...
Click to collapse
Put you pda on bootloader mod... and try any of this rom's i have managed http://forum.xda-developers.com/showthread.php?t=316062
Stay cool!
I followed the instructions carefully, and my phone (Qtek S200) seemed to boot with WM6.0
However, after aligning screen, it tried to initialize the phone with some extended roms, a procedure which failed, and I had to soft reset.
After reboot, it seems to work fine.
Is it?
EDIT: Another thing I noticed is that keyboard is in THAI !!! How can I make US the default? Olso, I have Resco keyboard GR edition. Will this work with WM6?
tonydeli7 said:
1. Download the NVID(no vendor) AKU2.2 rom for WM5 here :http://rapidshare.com/files/17208693/RUU_Prophet_220734_2207114_024721_NVID.exe
Click to expand...
Click to collapse
Is this G3 only, or both?
I'm asking, because in PDAviet's temp file there are two different rom updaters, but in the file linked above there is only one.
yoda_143 said:
Is this G3 only, or both?
I'm asking, because in PDAviet's temp file there are two different rom updaters, but in the file linked above there is only one.
Click to expand...
Click to collapse
i don't know mate.i believe you can use pdaviet's temp instead of aku2.2 nvid...
Another thing I noticed, is that it looses pairing with my bt handsfree...
I am making the pairing, and works fine. However, when at night I am shutting off my hf in order to save battery, the next morning the pairing is gone.
Any solution to this?
i hav a problem!i have sucessful boot wit wm6 and everythings fine but only i can't access to contacts,everytme i press it will automatic switch back to today screen...and there is no autoconfig???anyone help???i can't save my contacts...
dufchan said:
i hav a problem!i have sucessful boot wit wm6 and everythings fine but only i can't access to contacts,everytme i press it will automatic switch back to today screen...and there is no autoconfig???anyone help???i can't save my contacts...
Click to expand...
Click to collapse
You've forgot to do a hard reset after flashing, please read one of the flashing guides.
I-mate Jamin
hello evrybody
i just wanted to know if i can upgrate my WM5 to WM6 on my I-mate JAMin?
rondol1 said:
You've forgot to do a hard reset after flashing, please read one of the flashing guides.
Click to expand...
Click to collapse
thank u very much!!now my dopod working fine!!thanks a lot!!
thanx for the guide
help me please..
P4k1t0 said:
Put you pda on bootloader mod... and try any of this rom's i have managed http://forum.xda-developers.com/showthread.php?t=316062
Stay cool!
Click to expand...
Click to collapse
how to do that?
thx..
Choice of ROM
Hello guys, tanks for a so nice job !
I would like to have more information about the choice of ROM.
I don't want any special feature, just the row wm6.
no programs added, no tweaky today, no bugs, no battery problem, etc etc
which one would fit that the best ?
thanks
Thnx for this man, much appreciated!

V1605 Flash to WM6

Please excuse my ignorance on this issue but I am new to WM.
I have a vodafone V1605 with WM5 on it, I have obtained the official HTC TyTN WM6 ROM.
1. Can I flash the ROM to WM6 on this device?
2. I have backed up the device and saved the VF settings (MMS, web etc) is there anything else I should do before I attempt to do this?
3. What is the potential the brick the device if something goes wrong? / What issues may I need to be aware of to stop me bricking the device?
Many thanks for any advice.
v1605 cant upgrade
I have a similar situation but dont know how to back up the Vodafone settings. How do you do that? I tried installing the update but as I have read since this will not work on a Vodafone handset. Not too sure exactly what to do or if its a risky move to try...
Any help would be great.
Thanks
samo problem
can i just flash it or no ?
READING and learn BEFORE..........
Perhaps you can beter read this forum. Even better try the WIKI.
Don't do anything if you are not sure.
It took me about 14 days before I even dared to upgrade my radio. Then after a few days I upgrade my OS.
Now I'm almost flashing after 2 or 3 days a new or enhanced version of OS trying out and testing.
It's a fun hobby but read carefully!
Try also - The HTC Guide: Hermes (aka MrVanx's Hermes Upgrade Guide)
http://forum.xda-developers.com/showthread.php?t=299462
hello all's
after read a lot of topic, i want flash my v1605 with official wm6 htc rom.
But i have no ideas with precision "how to all"
somebody can help me?
in a first time, the v1605 must be "supercid" ?
after i could flash the device?
Bensat said:
Now I'm almost flashing after 2 or 3 days a new or enhanced version of OS trying out and testing.
Click to expand...
Click to collapse
That doesn't sound good. Tell us when you've found one that works properly.
V1605 Upgraded
I have upgraded my V1605 using the HTC official ROM.
Use the WIKI - it has loads of useful hints and tips!
I did unlock my device using the Hermes unlocker first (if you follow the instructions this is pretty straight forward).
I then applied the ROM update and it worked without any issues.
To complete I used the HTC operator setup tool to put my Vodafone settings back on the device (MMS, WAP, Web etc).
I now have a WM6 V1605.
So do review the WIKI as I am sure many people state, but after a few days reading and a decision whether to unlock or use HardSPL it is pretty straight forward.
I've update the 1605 few weeks ago without problems.
Follow the wiki and read some thread before, justo to understan what are you doing.
No particular problem in all the procedure.
Now I have superCID, SHAPS ROM 3.54b, and 1.50 radio.
The brik goes faster and much better.
Enjoy
Upgrade v1605 to HTC TyTN WM6 and upgrade radio too
For Users of Vodafone v1605: There is no official upgrade from Vodafone.
This is my current configuration: HTC WM6 official
ROM Version: 3.54.255.3
ROM Date: 07/05/2007
Radio Version: 1.48.00.10
Protocol version: 32.81.7020.20H
ExtRom version: 3.54.255.104
For Vodafone v1605: running official Vodafone WM5
Official HTC Caution:
1.Upgrading the ROM Code erases all of personal data and custom-installed applications from the device. Make sure all of your personal information and data are backed up to your PC via ActiveSync or Windows Mobile Device Center. After updating the ROM, copy the data back to your mobile device and reinstall your applications.
2.Third-party applications may have compatibility issues with Windows Mobile® 6. Please consult with the software developer(s) before upgrading to Windows Mobile® 6.
3.Make sure the remaining battery power is above 50% before performing a ROM upgrade.
4.Before upgrading the ROM, remove the microSD memory card from your device.
5.Do not disconnect the USB cable or start other applications on your PC while the ROM upgrade program is running. Doing so may cause the upgrade program to fail. In the worst situation, your mobile device may fail to boot.
6.The entire ROM upgrade installation process takes about 15-20 minutes. Please wait patiently.
7.When the upgrade has completed, the mobile device will reboot and start installation of certain components automatically. This takes about 3-5 minutes.
8.If you are not familiar with these operations or if you don’t know how to work with your PC, please visit your distributor or contact us for assistance.
9.Note that once the operating system is upgraded to Windows Mobile® 6, it cannot be downgraded to Windows Mobile 5. Consider your options carefully before you upgrade.
10.Users who have a membership with HTC should upgrade via the HTC official website. Upgrades done otherwise, i.e. through non-HTC-authorized channels, are considered illegal. HTC shall not be liable for any damage to the data or the user’s breach of the related laws and regulations.
This is what I suggest as it worked for me.
Download:
1. HTC Europe WM6 official: HTC_TyTN_WWE_3[1].54.255.3_6275_1.48.10.108.exe
http://rapidshare.com/files/46467733....00.10_108.exe
2. Hard SPL7 from: http://www.mrvanx.org/
Instructions:
1. Read this website: ink: http://www.mrvanx.org/cms/index.php?option=com_content&task=view&id=65&Itemid=26
2. Go Straight to following: Upgrade SPL to HardSPL v7 (2.10.olipro) Link: http://www.mrvanx.org/cms/index.php?option=com_content&task=view&id=30&Itemid=27
3. Check list:
• See that your bootloader reads
IPL: 1.04 SPL: 2.30.Olipro
• Your Windows XP should have Microsoft .Net ver 2.0+
• Write down all the MMS, GPRS, servers and portals details, Backup all the contacts and stuff you want.
• Remove the MicroSD card. (Don’t know why)
• Run the HTC TyTn ___108.exe file
• Voila. The v1605 boots to WM6 official HTC version.
• Everything is upgraded. Even the radio to 1.48.00.10 version. No need for separate upgrade.
THANK's a lot
Thanks
Great thanks a lot
V1605 WM6
upgrade v1605 herm200 ipl 1.01 spl 1.09
hi,
i have a pda v1605 vodafone italy ipl 1.01 spl 1.09.so i want install wm6 ( hmm..wm5.2) cause i want my mobile faster and more fresh look..eheh..my question is: do i need install bl first using hardspl7 or can i proceed with the installation of an official vf rom ita??
of course i don't want lose my warranty...
what kind of bl i need? of course i want downgrade in case of assistance need.
thanks in advance
Just to confirm, I have a Vodafone 1605 with 2.30 bootloader. My steps to upgrade were:
1. For neatness I hard reset
2. Sync with Activesync
3. Flash to that latest HardSPL (V7)
4. Flash to Mobile 6 using the HTC release HTC_TYTN_WWE_3.54.255.3_6275_1.48.0.0.10_108.exe
5. It worked
Link for WM6
Just tried this link and its not working, anyone know of another source?
Thanks
Cenick
popeyethedoc said:
For Users of Vodafone v1605: There is no official upgrade from Vodafone.
This is what I suggest as it worked for me.
Download:
1. HTC Europe WM6 official: HTC_TyTN_WWE_3[1].54.255.3_6275_1.48.10.108.exe
http://rapidshare.com/files/46467733....00.10_108.exe
Click to expand...
Click to collapse

Hard-SPL - or how to CID unlock your device

This is Hard-SPL for the G4; flashing procedure is essentially the same as G3 although do make sure that the filesize you flash is 0xC0000 rather than the 1MB that people flash for a G3.
Cheers!
PS: while this has been tested and is known to work, I do not actually own a Wizard and so am relatively limited in the help I can offer with regard to issues you may have getting your device working or whatever
Great job Olipro! Stickied.
Damn nice! One step closer to a real cid-unlock You are great!
Olipro said:
This is Hard-SPL for the G4; flashing procedure is essentially the same as G3 although do make sure that the filesize you flash is 0xC0000 rather than the 1MB that people flash for a G3.
Cheers!
PS: while this has been tested and is known to work, I do not actually own a Wizard and so am relatively limited in the help I can offer with regard to issues you may have getting your device working or whatever
Click to expand...
Click to collapse
sorry 2 sound like a noob
i've been using the uni
just bought a used g4 wizard..
how do v use this.????
how's this different from
http://forum.xda-developers.com/showthread.php?t=332320
frz said:
sorry 2 sound like a noob
i've been using the uni
just bought a used g4 wizard..
how do v use this.????
how's this different from
http://forum.xda-developers.com/showthread.php?t=332320
Click to expand...
Click to collapse
This is one is the patched SPL file alone (the original). The other is the 'spoon feed' version meaning you just need to run a file once and all the job is done nice and easily...
PS:
One thing i find hard to understand is why this thread was made sticky a few minutes after being posted and the other two from The Equinox (sSPL and HardSPL), who are meant to be easy to handle and error proof for noobs weren't, even though they have proven to be of great help and acceptance.
Are we here for the good of all or is the status quo a relevant issue? (off the chest...sorry)
Can I flash this file in bootloader mode ??
My Wizzard is freezing on splashscreen and it's work only in bootloader mode. Is there any way to flash this file ??
It's the only rescue for my Wizzard.
chrzanek said:
Can I flash this file in bootloader mode ??
My Wizzard is freezing on splashscreen and it's work only in bootloader mode. Is there any way to flash this file ??
It's the only rescue for my Wizzard.
Click to expand...
Click to collapse
You can but you must first build a nk.nb file with it and also flash via RUU
wow thanks....it's just sad that i don't know how i can help....
mestrini said:
You can but you must first build a nk.nb file with it and also flash via RUU
Click to expand...
Click to collapse
Thanks I did this, but it does't help to me i still have:
Cmd>r2sd os
***** user area size = 0xF300000 Bytes
R2SDBackup() - Download type = 3
usTotalBlock = 1 sizeof(SDCARD_SIGNATRUE_TABLE)=512
You didn't get the proper security level to download a specific image
when i'm trying to copy OS to sd card ( i have format failed when i'm trying HR )
So the only way is imei-check
You can use this topic(if your device is G3)
http://forum.xda-developers.com/showthread.php?t=307332&page=4
1. flash Prophet cooked rom -> you can Hardreset
2. flash shiprom then unlock
i saved my G3 like that
RClub said:
You can use this topic(if your device is G3)
http://forum.xda-developers.com/showthread.php?t=307332&page=4
1. flash Prophet cooked rom -> you can Hardreset
2. flash shiprom then unlock
i saved my G3 like that
Click to expand...
Click to collapse
unfortunately it's G4. But thanks.
Hard-SPL not working at all on my WIZ (T-Mobile MDA VARIO US G4) CID unlock impossible! Anybody an idea how to get it unlocked?
The spl flashing works fine and it even shows the olip spl when rebooting the wiz but afterwards everything remains the same - can't flash other roms!
Junner2003 said:
Hard-SPL not working at all on my WIZ (T-Mobile MDA VARIO US G4) CID unlock impossible! Anybody an idea how to get it unlocked?
The spl flashing works fine and it even shows the olip spl when rebooting the wiz but afterwards everything remains the same - can't flash other roms!
Click to expand...
Click to collapse
Have you tried the Mun RUU in the Hard SPL posted in TS of the Hard SPL thread?
How does the Soft SPL work?
is it possible to use it even with my SPL? (see signature)
cheers
irm
I have an extra 8125 laying around so I thought I would play with it. I applied your update and I am going to assume I can upgrade the 8125 to WM6 as long as the IPL and SPL doesnt change. I have looked at some other post on this site and there seems to be options in wich you can upgrade the IPL/SPL and still CID and SIM unlock the 8125. At the present with the solution from this thread I have the 8125 Sim unlocked.
total noob here
Olipro said:
This is Hard-SPL for the G4; flashing procedure is essentially the same as G3 although do make sure that the filesize you flash is 0xC0000 rather than the 1MB that people flash for a G3.
Cheers!
PS: while this has been tested and is known to work, I do not actually own a Wizard and so am relatively limited in the help I can offer with regard to issues you may have getting your device working or whatever
Click to expand...
Click to collapse
i know my device is a G4 so am in the right place, but what exactly do i do with this file?
How to upgrade a unlocked HTC Wizard
Hi
I have a used Qtek 9100 with preinstalled NBD 9.3 ( Do not know who did it? ). I know it is a G4 and it may be CID Unlocked. I wanted to flash a new or another ROM so what should I do.
What is the HardSPL and SoftSPL, do I need to use these to flash new rom to my mobile.
I have installed/checked the Wizard Service Tool v4.2.2. These are the info..
--------------------------------------------------------------------
CPU: Texas Instruments - OMAP850
MODEL: Wizard
IMEI: 356384008852681
=> Bootloaders:
IPL: 2.17.0001 (G4 device)
SPL: 2.17.0001 (G4 device)
Built on Feb 10 2006 at 11:55:14
Copyright (c) 2003 High Tech Computer Corporation
=> Firmware:
OS: 5.2.xxx (Build 18125.0.4.2)
ROM: 0.0
Registry AKU: .0.4.2
Radio: 02.07.1ò
Protocol: P413.1.03
=>Extended_ROM:
Version: Unknown
Name: Extended_ROM
Status: hidden
=> Drives and partitions:
|--Handle--|---Size---|
4fb80df6 - 19.00k (0x4c00)
ee9ce08e - 9.99M (0x9fd800)
ceadaa12 - 43.24M (0x2b3e000)
eeb28aa2 - 50.88M (0x32e0000)
eeb287ee - 3.00M (0x300000)
0eb2879a - 3.06M (0x30fc00)
=> DOC chip unique ID:
00000000fd23020138300e891503067f
Key Index: 2
------------------------------------------------------------
Please guide me.
At last, BT icon is disabled in taskbar. How to enable it? Please help....
Many Thanks
Srikanth.K
ksrikanth said:
Hi
I have a used Qtek 9100 with preinstalled NBD 9.3 ( Do not know who did it? ). I know it is a G4 and it may be CID Unlocked. I wanted to flash a new or another ROM so what should I do.
What is the HardSPL and SoftSPL, do I need to use these to flash new rom to my mobile.
I have installed/checked the Wizard Service Tool v4.2.2. These are the info..
--------------------------------------------------------------------
CPU: Texas Instruments - OMAP850
MODEL: Wizard
IMEI: 356384008852681
=> Bootloaders:
IPL: 2.17.0001 (G4 device)
SPL: 2.17.0001 (G4 device)
Built on Feb 10 2006 at 11:55:14
Copyright (c) 2003 High Tech Computer Corporation
=> Firmware:
OS: 5.2.xxx (Build 18125.0.4.2)
ROM: 0.0
Registry AKU: .0.4.2
Radio: 02.07.1ò
Protocol: P413.1.03
=>Extended_ROM:
Version: Unknown
Name: Extended_ROM
Status: hidden
=> Drives and partitions:
|--Handle--|---Size---|
4fb80df6 - 19.00k (0x4c00)
ee9ce08e - 9.99M (0x9fd800)
ceadaa12 - 43.24M (0x2b3e000)
eeb28aa2 - 50.88M (0x32e0000)
eeb287ee - 3.00M (0x300000)
0eb2879a - 3.06M (0x30fc00)
=> DOC chip unique ID:
00000000fd23020138300e891503067f
Key Index: 2
------------------------------------------------------------
Please guide me.
At last, BT icon is disabled in taskbar. How to enable it? Please help....
Many Thanks
Srikanth.K
Click to expand...
Click to collapse
With IPL/SPL 2.17.0001 and running NBD 9 series,which is a wm6 rom,it must have be upgraded through 'SoftSPL' method,now you can change the rom either with SoftSPL or if you want to get your phone semi-CID unlocked,you can apply 'HardSPL',it'll flash patched IPL/SPL to make it semi-CID unlocked,remember,a G4 device cannot be permanantly CID unlocked like a G3 phone,but you'll be able to flash any wm6 or 6.1 rom easily with HardSPL.
HardSPL method is done only once and after that you can flash and change rom easily,where as,with SoftSPL,you'll have to do the Flash every time through SoftSPL,but it doesn't change the original Bootloaders (IPL/SPL).
The choice is your !
How to upgrade my i-mate K-JAM? please help me

PLEASE HELP ME TO UPGRADE MY K-JAM FROM WM5 to WM6

these are the details of my device:
I want to install Windows Mobile 6 Professional
I want to install Windows Mobile 6 Professional on my imate K-JAM. its details are mentioned as under:
Received Info Via:
Wizard Service Tool v4.2.1
Device Info:
CPU: Texas Instruments - OMAP850
MODEL: Wizard
=> Bootloaders:
IPL: 2.26.0001 (G4 device)
SPL: 2.26.0001 (G4 device)
Copyright (c) 2003 High Tech Computer Corporation
=> Firmware:
OS: 5.1.xxx (Build 14955.2.3.0)
ROM: 2.26
Registry AKU: .2.3.0
Radio: 02.25.11
Protocol: 4.1.13.12
=>Extended_ROM:
Version: 2.26.10.105
Name: Extended_ROM
Status: hidden
=> Drives and partitions:
|--Handle--|---Size---|
ce9df3ca - 5.00M (0x4fec00)
2ea9d13a - 48.23M (0x303c000)
4fb25f92 - 50.95M (0x32f4000)
6fb25f3e - 2.94M (0x2f0000)
cfb25fb6 - 3.06M (0x30fc00)
All Done.
I have tried a lot with different ROMs but ...i just wana weep .....i dono wat the hell is happening with all this....
some times wen the installation completes and everything looks fine as with Wizard_Love_2.26.10.2_WWE_Novii_CF2 it worked fine but when i checked the version of WM it says its same as before WM5. sometimes it completes the installation with e.g Xplore_1.1 but at the time of reboot it shoes bootloader screen (try color screen). then i re-install the original WM5 ROM and get my device back in action from that BRICKED HELL.
please help me out and tell me the right path to go on...
1- is it possible to upgrade this device to WM6?
2- if yes then what are the exact files and exact method to do all that?
3- I NEED IT URGENTLY.... I MEAN THE ANSWER.?
thnx and regards,
Yawar
oh one thing more i have checked the CID lock the answer is:
SPL version is 2.26.0001
DOC chip is write-protected!!
Downgrade SPL to no higher than 1.06 and
repeat procedure.
Now Tell Me Wat to do????
http://forum.xda-developers.com/showpost.php?p=1849388&postcount=3
Download the ROM from this page:
http://rapidshare.com/users/IW25NT
Install the ROM which is clean vanilla.. I have installed the same in my kjam and it works fine...
for more info mail me at [email protected]
y4yawar
To upgrade your phone read and do as instructed in stickies 'HardSPL' or 'SoftSPL' in this forum.
Cheers!
Resolved By Me
Well all, i have resolved this problem. the reason was CID Locked. I used one tool to UNLOCK CID. Now everything works fine.
Thanks For all of yours help
y4yawar said:
Well all, i have resolved this problem. the reason was CID Locked. I used one tool to UNLOCK CID. Now everything works fine.
Thanks For all of yours help
Click to expand...
Click to collapse
For free? that's not possible unless you're talking about HardSPL (which isn't a real CID unlocking...)
y4yawar said:
Well all, i have resolved this problem. the reason was CID Locked. I used one tool to UNLOCK CID. Now everything works fine.
Thanks For all of yours help
Click to expand...
Click to collapse
Which tool did you use? Because I used all the tools I know but couldn't unlock that G4 monster. I am going to the mental hospital if I don't find the solution in 24 hours,
sipraomer said:
Which tool did you use? Because I used all the tools I know but couldn't unlock that G4 monster. I am going to the mental hospital if I don't find the solution in 24 hours,
Click to expand...
Click to collapse
Hold your horses here! if its a G4,it cannot be CID unlocked,there's no free solution for this,the only other way to get it upgraded is through 'HardSPL' or 'SoftSPL', both the methods are posted as stickies in this G4 forum,read and do it correctly.
zabardast_1 said:
Hold your horses here! if its a G4,it cannot be CID unlocked,there's no free solution for this,the only other way to get it upgraded is through 'HardSPL' or 'SoftSPL', both the methods are posted as stickies in this G4 forum,read and do it correctly.
Click to expand...
Click to collapse
hahahh. Yeh I managed it. Illusion is a dangerous enemy. My saying.

Categories

Resources