PROBLEM: PhonePAd internationl - JAMin, XDA Neo, S200 ROM Development

Hi,
I've I-mate Jamin with WM6 rom (PDAVIET 4.0.0.6).
I try to install phonePad Internation for get T9 Italian dictionary in my prophet, but after softreset I'm unable to activate this (I see PhonePad in input method list but when I press on it nothing occurs).Why?
Can anyone help me?
Tanks
Gian

I have the same problem with many of WM6 roms, and i can't seem to find what is causing this problem.. Any one know anything of this problem ?

try a soft reset. ive got this prob too and now its ok. i think its a memory problem.

Software Reset does not help for me.. The only thing that has worked for me yet is to re install.. Then it will work for around 3 - 4 uses and then the problem begins again..

is it memory? I had similar problems, and changing the page pool worked for me.
I'm a bit monged right now, so I can't even remember which size is which.
Try 12meg page pool(or if I got it the wrong way round try 4 )
There's stuff on this site, and probably on the wiki, explaining which is which.

Related

No screen keyboard after U/G

Hie guys,
I have problem here. after i upgrade my rom from german O2 OS to UK o2 OS. My screen keyboard doesnt shows. Here is the following steps that i did to upgrade:
1. device installed with Germany O2 operating system.
2. upgraded to QTEK 2020 OS, with Croations telecom settings.
3. Upgraded again to UK O2 OS.
after the successful installation, i have no problem with the keyboard. It functions normally. but after i install a few games, dictionary and some add-ons program. The keyboard doesnt appear. i cant write any letter, using keyboard, letter recognizer or block recognizer. Moreover, i cant start any program from the program folder.
Can anyone help me with my problem? What actually happens to my system? is there anything to do with the OS or the program that i have installed on my xda?
Thanks in advanced
have you try to soft reset your device??? if it cant solve the problem, try to hardreset device n install back your applications and games...
I have done it twice. and i encountered the same problem.
can this because of the program, that i have installed on my PPC is not compatible to the ROM that is present?
probably thats the problem...you can try to take a hard reset your device..
if you still encountered the same problem after hard reset, please let me know :lol: :lol:
Hi again!
i have tried hard reset my PPC a few times. and i encountered e same problem. in fact, i have tried to reinstall the windows mobile again. but the problem not seems to be solved...
Now only i figured out, actually the problem occurs, when i took off my battery to change the sim card, or i soft reset the system. Once i got it restarted, it will not start any program, the on screen keyboard and other writings program.
now i am trying to install back to the german rom. is this problem caused by the 1st rom from qtek with croation's settings, that i have installed on my system??

SMS send/receive problem

im in serious problem now.. i can't send and receive sms.. i tried black shadow and faria.. it will just work for few minutes or an hour and after that my messages are stuck in outbox.. my radio version is 1.43.. i downgraded step by step just to check if its working fine.. right now im using 1.40 but still the same problem.. my bootloader is 2.10 - Hard-SPL-V7
any solution guys.. this is the saddest party of my life..
blackphnx said:
im in serious problem now.. i can't send and receive sms.. i tried black shadow and faria.. it will just work for few minutes or an hour and after that my messages are stuck in outbox.. my radio version is 1.43.. i downgraded step by step just to check if its working fine.. right now im using 1.40 but still the same problem.. my bootloader is 2.10 - Hard-SPL-V7
any solution guys.. this is the saddest party of my life..
Click to expand...
Click to collapse
I have no solution for your problem...
blackphnx said:
im in serious problem now.. i can't send and receive sms.. i tried black shadow and faria.. it will just work for few minutes or an hour and after that my messages are stuck in outbox.. my radio version is 1.43.. i downgraded step by step just to check if its working fine.. right now im using 1.40 but still the same problem.. my bootloader is 2.10 - Hard-SPL-V7
any solution guys.. this is the saddest party of my life..
Click to expand...
Click to collapse
HI,
Maybe you could check your sms setting from your operator.
Or, you can do this;
(Settings)->(Phone)->(Services)->(Voice mail and Text Messages)->Press Get Settings.
That's it.
Try it and report back.
regards,
mmorisa said:
HI,
Maybe you could check your sms setting from your operator.
Or, you can do this;
(Settings)->(Phone)->(Services)->(Voice mail and Text Messages)->Press Get Settings.
That's it.
Try it and report back.
regards,
Click to expand...
Click to collapse
i tried it and even called my operator.. she gave me some settings which i did but it didn't help.. strange thing is... whenever i change ROM.. like from black shadow to faria... it would work for couple of hours or maybe certain amount of messages then it won't send and remains in outbox.. right now.. i downgraded to WM5 and SPL 1.4 and radio 1.40...
blackphnx said:
i tried it and even called my operator.. she gave me some settings which i did but it didn't help.. strange thing is... whenever i change ROM.. like from black shadow to faria... it would work for couple of hours or maybe certain amount of messages then it won't send and remains in outbox.. right now.. i downgraded to WM5 and SPL 1.4 and radio 1.40...
Click to expand...
Click to collapse
Hey mate...
Recently, i got the same problem (also post a new thread here) with the black pro and LVSW version...
After investigate, i found the it is the problem of o2 SMS plus, this software totally conflict with wm6 right the moment.
For your case, i suggest you try to hardreset your device first.
Don't install any software, test it for a few days to see any problem occur again.
If no, try to install software one by one and test it again.
Good luck
blackphnx said:
i tried it and even called my operator.. she gave me some settings which i did but it didn't help.. strange thing is... whenever i change ROM.. like from black shadow to faria... it would work for couple of hours or maybe certain amount of messages then it won't send and remains in outbox.. right now.. i downgraded to WM5 and SPL 1.4 and radio 1.40...
Click to expand...
Click to collapse
Hi again,
I am not sure abut this ROM thing because I use Dutty's v2 ROM and stay with it.
Maybe Netmon's suggestion could be used for you.
If you haven't install anything yet in your PDA yet after a hard reset, you could try these few tests;
a) send sms to your friends
b) ask them to reply your sms
c) send sms to yourself
d) leave the machine up and running for more than 1 hour ( charge it ).
e) repeat the same test (a,b & c) above and see the result.
f) if OK, then your third party software could be the culprit.
Mind telling us what did you install? (for us to indentify and/or see if the problem persist if we install the same as yours)
Regards,
morisa
im using Dopod 838 Pro.. the only appz i have is:
* winsbar light
* tdyscheme changer
* TCPMP with addons
* group sms
* sunnysoft vcard
* SOTI pocket controller pro
* JGUI myCalendar
* mental motions MultiPad
* audio notes
for the meantime those are the appz installed..
btw if you say hardreset that means like format right? isn't it formatted when you upgrade the ROM?..
blackphnx said:
im using Dopod 838 Pro.. the only appz i have is:
* winsbar light
* tdyscheme changer
* TCPMP with addons
* group sms
* sunnysoft vcard
for the meantime those are the appz installed..
btw if you say hardreset that means like format right? isn't it formatted when you upgrade the ROM?..
Click to expand...
Click to collapse
Hi again,
Yess, hard reset=format and when we upgrade our ROM, the machine will be hard-reset too.
The above softwares are add-ons installed after the format right?
Just for a test and for a few days, if you could live with it, do not install anything besides restoring your contacts after the ROM upgrade or downgrade. During the period, test your sms capability and observe any peculiar things with it.
Shall you want to extend your test and to comform your believe that it is due to ROM's issue, kindly revert to your Dopod's WM5 ROM which is downloadable in Dopod website. Then do the same test for the sms.
Shall it be OK then it could be the ROM and if not, it might be something else.
Like myself, I don't have the software as listed by you above installed in my machine and I am using Dopod 838 pro too. I don't have any problem with sms so far
Hopefully you can carry on with the test while I try to see if the problem happens to me if I install the above software like you. Give me a few days for the result.
Regards,
morisa
mmorisa said:
Hi again,
Yess, hard reset=format and when we upgrade our ROM, the machine will be hard-reset too.
The above softwares are add-ons installed after the format right?
Just for a test and for a few days, if you could live with it, do not install anything besides restoring your contacts after the ROM upgrade or downgrade. During the period, test your sms capability and observe any peculiar things with it.
Shall you want to extend your test and to comform your believe that it is due to ROM's issue, kindly revert to your Dopod's WM5 ROM which is downloadable in Dopod website. Then do the same test for the sms.
Shall it be OK then it could be the ROM and if not, it might be something else.
Like myself, I don't have the software as listed by you above installed in my machine and I am using Dopod 838 pro too. I don't have any problem with sms so far
Hopefully you can carry on with the test while I try to see if the problem happens to me if I install the above software like you. Give me a few days for the result.
Regards,
morisa
Click to expand...
Click to collapse
hi morisa! yesterday i downgrade all the stuff back to WM5.. and everything is working smoothly..
i got a sd card installed with previous programs.. but of course when i upgrade everything is erased, the only remaining folder left is Program Files.. do you think this might be one of the cause or should i format my sd card too..
any update guys?
blackphnx said:
hi morisa! yesterday i downgrade all the stuff back to WM5.. and everything is working smoothly..
i got a sd card installed with previous programs.. but of course when i upgrade everything is erased, the only remaining folder left is Program Files.. do you think this might be one of the cause or should i format my sd card too..
Click to expand...
Click to collapse
HI again,
Glad that you manage to get it work under WM5.
Well, not much could be done with the "Program Files" folder in your SD card. You can keep it if you want but make a clean format of the SD cards is highly advisable.
Do not install anything that has interaction with today screen inside the SD card. Always install in memory.
Regarding my test as I said in my previous post, I only install the prog which concerns SMS and no problem so far. (install in memory)
I even go the extend of installing "SMS Scheduler" and Vijay's "Flash SMS", and the result is OK, no problem so far.
Thus, I uninstall O2sms+, Group sms etc which I don't use and back to my old PDA state. No problem too. So, it could be the ROM or the Radio ROM.
By the way, I am using 1.43 Radio ROM.
Regards,
morisa
right now im trying Schaps WM6 3.30.. i deleted everything in my SD card.. didnt installed any apps yet.. all default.. ill keep you posted.. i hope this time it would be all good..
I downgraded my radio from from 1.43.00.00 to 1.38.00.10. It seems like my problem is gone now. Haven't had a text messaging issue in the past 36 hours. Hopefully it stays that way.
wasup people!
after upgrading to Schap's WM6 3.30c.. SMS send/receive is working good (its been 10hrs and no further problems) im using SPL 2.10 Olipro and my Radio is 1.41
the only application i installed since the upgrade is GroupSMS.
i hope there would be no problems..
im now using Schap's WM6 3.30c and everything is going fine.. no more problems so far.. i just format my SD card and everything and installed the new ROM.. i guess when i was upgrading there is a tick box that i should select which says "its hard SPL?" which i didn't select.. and probably that cause the problem.. tho im not sure about it..
link / cab
could someone provide a link or cab for the o2sms plus app you are using on your wm6 roms? at least the version.
UGH
I got the same problem here... this only started happening when I upgraded to Schaps latest rom (4.0 rc). I'm getting concerned that there doesn't appear to be a true or known fix for this problem

WM6 Error , Wave Output: Device Error !

Hi,
In Every ROM with WM6 and WM6.1 I got this trouble.
My QTEK S200 works fine with MW5 , when I install a WM6 ROM the sound dissapear.
First my QTEK S200 (HTC Prophet)
IPL: 2.20.0001
SPL: 2.20.0001
Radio: 2.47.21
OS: 2.20.7.35 WWE Korand 3.1 WM6.1
Protocol: 4.1.13.24
2 GB SD
Software Installed:
Coreplayer 1.1.0
SPB Weather 1.0
Oxios Memory 1.40
Battery Status 1.04.203 beta4
Windows Live for Mobile 10.6.0033.0600
How this happen...
1.- The Sound dont work, The Speaker.
2.- I can recibe call and call. But incomming call theres no sound only Vibration.
3.- When this happend I try to Open CorePlayer or any software for media and give a error " Wave Output: Devide Error !"
4.- Reset , the sound come back but...
5.- After this the ENDCALL Button works bad, after pressing this sound like a chime.
I got to rollback to WM5 and the trouble never come again.
I try a lot of things Reset, Flash , Reflash , Another ROM , bla bla...
And I confirm this only happen with WM6 and now WM6.1
I Think this is a software trouble , no hardware because when I turn the Volume down the weird Chime Sound go down too.
Please Gullum , HMA4 , Korand, Cloudyfa ... help me ... I dont know what to do ...
Seems only you have this problem, try to read step by step guide to upgrade again then flash to Korand 2.6 WWE, if the problem still happen, it must be your hardware problem.
IN your signature :
IPL: 2.20.0001
SPL: 2.20.0001
Radio: 2.47.21
OS: 2.20.7.35 WWE Korand 3.1 WM6.1
Protocol: 4.1.13.24
How can Korand 3.1 using SPL 2.20.0001 ??? when using korand 3.1 the SPL should be 2.g3.4pda.
To me it seems to be a software conflict. Try to keep your ROM clean after a reflash for some time. If you have this problem without any additional software installed, then the problem is with your Prophet (as you being the only one reporting) but I can't imaging because things work fine with WM5.
So give it a try and don't install anything exept your ROM.
@tb:
He probably used JumpSPL to flash, that utill don't change the SPL but bypasses it only once.
Looks like a radio Problem. change your radio, I think it will help just give it a shot ..
thanks guys
thanks for your comments ... since yesterdar I do a HardReset and work with the rom clean ...
Everything goes ok ... But lets see...
If the problem appears again I will notice you..
Thanks again..
PS HMA4 when you gonna bring to life a new Crystal ?
gzprophet said:
thanks for your comments ... since yesterdar I do a HardReset and work with the rom clean ...
Everything goes ok ... But lets see...
If the problem appears again I will notice you..
Thanks again..
PS HMA4 when you gonna bring to life a new Crystal ?
Click to expand...
Click to collapse
Hi, I can the same problem. I have korand 6.1 WW3. This problem is the same with Shadow (all version), Korand, etc. Do you find the problem? Im sorry for my poor english.
I have the same problem. It's not a big deal - happend only once or twice and after softreset the problem is no more. Using Konrad's 2.5.
Another problem that's more of a pain in the ass is that my prophet hangs once in a while. At times, when I press the power button to get it to standby mode it just won't turn back on - I have to soft reset it.
Problems such as not always working are something you must accept is going to happen when you put software on a device that it is not designed for. People like gullum and Cloudyfa try to remove as many problems as possible, but they will happen. Nothing can be done to prevent all problems, but the experts can sort most of them.
l3v5y said:
Problems such as not always working are something you must accept is going to happen when you put software on a device that it is not designed for. People like gullum and Cloudyfa try to remove as many problems as possible, but they will happen. Nothing can be done to prevent all problems, but the experts can sort most of them.
Click to expand...
Click to collapse
Yup, and we are pretty much aware of it But the guy was just pointing out the problem, so saying what you have said is quite pointless. Let's just try to work out the problems we can work out and try to "live" with the rest.
My comment was more about this:
Another problem that's more of a pain in the ass is that my prophet hangs once in a while.
Click to expand...
Click to collapse
me and my brother changed to WM6 and we both get the same problem that the sound goes off after some while and then i have to soft reset and then the sound comes back ,, this is a serious problem please try to find a solution
thank you
What ROM did you upgrade to?
Again ...
Hi , me again ...
I do a hard reset , work some days with a clean rom and the problem appears again ...
Clean ROM = No Sync, No Soft , No Apps , no Nothing !!!
A lots of tests ... So I Confirm that this problem is the ROM maybe the OS , some driver etc. WM 6 or WM 6.1.
I try to work some days without a SIM and the problem never come ... Maybe this can use as a clue for a solution.
I dont know what more I can do...
If HMA4 , Korand, Gullum or Cloudyfa need me as a tester for a solution to this problem I do it ..
Hi guys, I am experiecing the same problem.
Mine is a Dopod 818pro with SPL 2.20 and Radio ROM 2.69
Please advise your ROM versions to see if any clues.
Please Help !
Gullum, Cloudyfa, Korand, Hma4 and others developers ... please help us
I know of this problem with some builds and the workaround is to goto phone > menu > options and set kaypad of so no sound comes when pressing the numbers of the dial pad. some builds have the problem of disaparing sound after pressing in about 30 - 40 numbers on the phonepad.
Thanks Gollum
Thanks Friend...
So , you tell me if I turn Off the keypad tones the problem dont come back ?
But what about the Chime Sound when the Endcall button is preset ?
In my phone i Got the weird sound of the endcall button after the problem of the sound goes away ... a Soft Reset and the weird sound come ..
If you want in some solution for this I wanna help you as a tester..
Thanks again gollum
It sounds I was caught by the same problem, at least by looking. I got no sound from my phone speaker now. This happened after I try to play music through the Nokia BH801 BT headset. I installed a bunch of program but none works, and i lost sound after I installed BT 3900. Don't know if that's the reason, but I couldn't access bluetooth manager through BT 3900 indicating " insufficient memory". Plus, I got two BT icons in "connection" page now
I would like to remove BT 3900, but wasn't able to locate the file. I read the Enable_MS_BT.cab could do the job, but just can't find the file.
Please give me some clues to solve this frustrating problem. Thx a lot
...
I think that your problem is other ...
But why you dont try a Hard Reset, if the problem is Logical or Soft Driver , a Hard Reset maybe can be the solution ...
Try this ... and see if your Speaker come to life again.
so what is the solution ,,, now more than 10 people have the same problem but no solution????????????????? (((((

HTC Home Problem

Guys i need some help here.
I am trying to install htchome to an x7500, but i cant get this.
I did try a lot of htchome editions . There are 2 things that happening . First off all the buttons ( dial and launch ) dont work. I am pressing them to enter a speed dial and nothing is happening. The mui is 409 and i did install the real vga but didnt help at all. Do u have any suggestions?
the rom is 2.21.405.2 and radio is 1.50.00.00
Thanks in advance.

TouchFLO3D is broken. Device.exe and DW.exe errors

hello all.
I've flashed my raphael (touch pro) whit this rom: http://www.megaupload.com/fr/?d=ZSYWWUTZ
but there is a big issue.
My touchflo3D interface is defaillants.
there is no caracters in the sms menu when i wrote a sms.
in attachment, 2 pictures of the problems
there is also a lot of errors like as:
"dw.exe has stop to ....." or "device.exe"
could you help me please?
(sorry for my bad english )
another strange thing's.
there is still the logo sfr upon startup that I flashed the phone.
It's normal?
Where did you get the download-link from? Sounds like a faulty ROM for me or you didn't follow the installation instructions. Did you f.e. hard reset after flashing this ROM?
i forgot the hard reset :s
i test this and i tell you if it's ok or not
For the link, it's a friend of me who gave me
(on forummobiles.com)
apparatly, after a hard reset, it's OK.
Thank's a lot
but there is still sfr screen on startup (and after, htc screen and after wm6 screen)
You probably have installed some operator branded ROM. But I don't think someone on this board can help you with that since you downloaded the ROM somewhere else.
When i buy my phone, i've directly came here but there is no fr rom
thanks a lot
Yes there are. How about this for example: http://forum.xda-developers.com/showthread.php?t=432516
i want to say, i want a official htc rom
but thank's for the link
i' have the same probleme...

Categories

Resources