hello all.
I've flashed my raphael (touch pro) whit this rom: http://www.megaupload.com/fr/?d=ZSYWWUTZ
but there is a big issue.
My touchflo3D interface is defaillants.
there is no caracters in the sms menu when i wrote a sms.
in attachment, 2 pictures of the problems
there is also a lot of errors like as:
"dw.exe has stop to ....." or "device.exe"
could you help me please?
(sorry for my bad english )
another strange thing's.
there is still the logo sfr upon startup that I flashed the phone.
It's normal?
Where did you get the download-link from? Sounds like a faulty ROM for me or you didn't follow the installation instructions. Did you f.e. hard reset after flashing this ROM?
i forgot the hard reset :s
i test this and i tell you if it's ok or not
For the link, it's a friend of me who gave me
(on forummobiles.com)
apparatly, after a hard reset, it's OK.
Thank's a lot
but there is still sfr screen on startup (and after, htc screen and after wm6 screen)
You probably have installed some operator branded ROM. But I don't think someone on this board can help you with that since you downloaded the ROM somewhere else.
When i buy my phone, i've directly came here but there is no fr rom
thanks a lot
Yes there are. How about this for example: http://forum.xda-developers.com/showthread.php?t=432516
i want to say, i want a official htc rom
but thank's for the link
i' have the same probleme...
Related
Hi all,
Have been mucking about with my Vodafone v1605 and the new HTC ROM. Had a play with the 'green' theme and decided to try and go back to Vodafon colours etc (basically the Vodafone extended ROM).
So, unlocked the Extended ROM, deleted the HTC stuff and replaced with Voda's. No problem.
When I hard reset the device it appeared to be loading HTC's stuff again???? I hard reset again and this time soft reset before the extended ROM could load. I now had a very vanilla WM5 setup
I now unlocked the ext rom again and went to re-import the Vodafone stuff...but it was allready there.
So - I ran the autoupdate and it stared to run. However, after a few secs it complained it could not find \Windows\vodafone.bmp. I ok'd and it carried on.
After all this I have a semi-vodafoned TyTN.
Anyone know what I need to do?? Does anyone have the vodafone.bmp so I may try again??? Is there an easier way to do this that I am missing???
Thanks - Rich
Some more digging found the following:
By simply taking any of the PNG splashscreens available on this site and calling it vodafone.bmp and placing it in the WINDOWS directory I can get the Vodafone extended ROM to run.
However, with teh ROM run I do not get the Vodafone theme or the phone skin or today plugins (guess they belong to the actual ROM not the extended). I do however get a 3 symbol....
In the end I gave up playnig and went back to the HTC extended ROM. Sure, green might not be 100% me but it's a nice change
R
Questions
Which ROm are you using instead the Vodafone one ?? Did you had screen calibration problems with the old ROM ? Changing the old ROM for the new one fixed this stuff ??
Ok this problem is related to the pre autorun issue that is availavail in the hermas verient....that means not only that the file willbe installed from the extrom bit also a part of extrom is kept in mail ce rom which will install before the installaton of ext rom...you can see it easily as the wait for 3 sec message after a hard reset will came twice the first time for pre autorum and second one from autorun...
now as u using the tytn rom s the pre auorun cnfig is still there which will install the green htc theme and default ie homepage and some other things like hsdpa anaval and some customised operator setting....so it doesnt matter what ext rom you use if u use the tytn main ce rom then u cant ignore them if not u reset just before first 3 sec wait massage and as a result u will not get the complete vodaphone ext rom addons as for vodaphone cd imate too there has some setting which relies on main image not on ext rom...
i think this explainaiton should clear it a bit..
thanks
Hi,
I've I-mate Jamin with WM6 rom (PDAVIET 4.0.0.6).
I try to install phonePad Internation for get T9 Italian dictionary in my prophet, but after softreset I'm unable to activate this (I see PhonePad in input method list but when I press on it nothing occurs).Why?
Can anyone help me?
Tanks
Gian
I have the same problem with many of WM6 roms, and i can't seem to find what is causing this problem.. Any one know anything of this problem ?
try a soft reset. ive got this prob too and now its ok. i think its a memory problem.
Software Reset does not help for me.. The only thing that has worked for me yet is to re install.. Then it will work for around 3 - 4 uses and then the problem begins again..
is it memory? I had similar problems, and changing the page pool worked for me.
I'm a bit monged right now, so I can't even remember which size is which.
Try 12meg page pool(or if I got it the wrong way round try 4 )
There's stuff on this site, and probably on the wiki, explaining which is which.
Hi all,
I have a HTC Touch Dual on Vodafone (Spain) and of course, everything is in Spanish.
Because I am English I thought I would be clever and Flash an English ROM (TOM_Niki-Project_WM6.1_WWE_16keys_signed_Ship.exe) .
The phone is SIM unlocked. I didn't think I would need to do anything else so I started to Flash the ROM. It got to about 4% and then it stopped and I got "Invalid Vendor ID...Ver3 - NJML5567..HUEbc07<NJM5561*" or something like that.
Tried to recover the situation with the Flash program but nothing.
I removed the battery and now it starts up with the Bootloader colour bars.
The only way I can start the phone is by using MTTY and command "boot".
Looks like WINDOWS MOBILE (spanish) program is still intact but I've upset the autoload part of the system.
All I want is an English Flash. Can anyone give me some help.
A step by Step would be great because I'm new to all this.
Do I need to CID Unlock? Do I need to run those other little programs called: "sspl-1[1].16-nike"....and "hardspl-1[1].16-nike" It's a 20 key model...will that make any difference?
ROM Model: NIKI 100
ROM Version is: 1.31.164.09
Radio Version: 1.58.16.27
Just want English Phone (sob sob) Can anyone please help? Don't want to end up with a Spanish Brick !!!!!!!!
Tony (frustrated in Spain)
keeezy said:
Hi all,
I have a HTC Touch Dual on Vodafone (Spain) and of course, everything is in Spanish.
Because I am English I thought I would be clever and Flash an English ROM (TOM_Niki-Project_WM6.1_WWE_16keys_signed_Ship.exe) .
The phone is SIM unlocked. I didn't think I would need to do anything else so I started to Flash the ROM. It got to about 4% and then it stopped and I got "Invalid Vendor ID...Ver3 - NJML5567..HUEbc07<NJM5561*" or something like that.
Tried to recover the situation with the Flash program but nothing.
I removed the battery and now it starts up with the Bootloader colour bars.
The only way I can start the phone is by using MTTY and command "boot".
Looks like WINDOWS MOBILE (spanish) program is still intact but I've upset the autoload part of the system.
All I want is an English Flash. Can anyone give me some help.
A step by Step would be great because I'm new to all this.
Do I need to CID Unlock? Do I need to run those other little programs called: "sspl-1[1].16-nike"....and "hardspl-1[1].16-nike" It's a 20 key model...will that make any difference?
ROM Model: NIKI 100
ROM Version is: 1.31.164.09
Radio Version: 1.58.16.27
Just want English Phone (sob sob) Can anyone please help? Don't want to end up with a Spanish Brick !!!!!!!!
Tony (frustrated in Spain)
Click to expand...
Click to collapse
Hello you can copy sspl-1 to you phone and do that the guy wrote ind the tread when you only will do that to flash the rom ones, hardspl is when you will try more that 1 rom
My suggetion is to read the wiki and any stickies on flashing with your device there is where you will get step by step instructions. If that doesnt give you your solution then is when you are in trouble, and need to post something about it.
sorry if it sounds rude but try these
http://forum.xda-developers.com/showthread.php?t=375967
http://forum.xda-developers.com/forumdisplay.php?s=&daysprune=&f=404
Thanks knudsen81 for the sspl-1 and hardspl explanations.
And thanks thakidc about the reading up thing, which I'm doing now.
Just one more question....Am I to understand that the phone needs to be CID unlocked before it can be Flashed ? or am I on the wrong track?
I guess while I've got the Bootloader colour bars...I haven't got a brick....right?
Hey wait a minute........that's 2 questions !!!! Sorry.
Thanks for all the help so far.
Tony
Great.............
Managed to Flash the ROM.
A careful step at a time seems to be the way.
Although it is a little nerve racking watching the percentage marker creeping along...and then stopping...and then starting again...whew, it got to 100%
Happy now...
Thanks everyone.
Tony
Hi.
I tried to find this on the forum and wiki, but i couldn't, so i want to ask.
I got a used Softbank X01HT, and seller said it was unlocked, but when i put in my sim i can do things for about 30 seconds, and then there comes a U-SIM screen and it asks me to enter something, i guess ( It's in japanese ).
How can i get this to go away? Is it even unlocked?
ROM: 1.33.761.4
Radio: 1.16.00.00
When i make call to phone i does to through and people can all even though U-SIM screen is there, and when people call, it is possible to go to the menues and such.. But when they hang up it goes back to U-SIM screen.
Please help
I have already read the Post april X01HT thread, though it is not relevant in this case because this is model from 2006.
Thank you
this is SIM unlocked phone (radio version 1.16.00), but your Windows Mobile ROM is the original SoftBank Japanese version that enforces USIM message...
You can flash to some other Windows Mobile ROM, but make sure you check Hard-SPL thread first (sticky in Hermes upgrading etc)
Hi thank you again!
I read something like that in the SIM unlock thread.
So i just need to install Hard-SPL and then flash a ROM?
Do i also need to do CID unlock? (http://forum.xda-developers.com/showthread.php?t=293665)
I would like to be able to write japanese with the phone, so is that possible if i flash? I saw a thread about installing japanese input/output support, is that possible to install on every rom?
And can you reccomend a rom or post link to ROM you think i should install?
THANK YOU! can't wait to start using it.
Now i just tried the Hard-SPL thing. But i get Update error 260 saying my device is not connected. I have ActiveSync 4.5 open and i have synced..
so i don't know.
I don't know if it has anything to do with the USIM screen being on all the time?
I see Active sync closing down as soon as it starts updating.. but then it can't update, right?
easiest way is to use SoftBank SIM for flashing everything, that way you avoid USIM message...
if you dont have SoftBank SIM available, search for welcome.exe on this forum.
SoftBank put a software SimLock in the ROM which can be removed with welcome.exe from imei-check unlocker. (http://www.imei-check.co.uk/m3100unlock.php) Start it up with you phone connected to USB and ActiveSync enabled... After the program asks for some password file, just close it! (close dos prompt window)
About Japanese IME (kanji & kanna input), i prefer flashing some newer English WM6 ROM + installing separate Japanese IME from cab. Old SoftBank's ROM is very slow and limited...
Super CID is just there if you flash HardSPL....
HI, thank you!
I found out that the USIM screen goes away if you just press on the signal bar and say that you don't want to receive signal.. den i can ue it.. And then i could do the Hard-SPL which i did with no problem. thank you!
Ah so if i just download that program and close it down at that time the USIM screen with never come again?
Yea i want to flash it to newer. But i'm not sure which one because i've heard a lot of people broken their phone :/
could to give me a link to a few "good" English WM6 ones?, though i there is probablt many.
i will try out the imei-check thing now ^_^!
Once you flash HardSPL; when you want to flash only Windows Mobile ROM only you dont have to worry about bricking (destroying) your phone. Only flashing different radio could be dangerous.
For the version, you have to find out yourself, there are so many... Check Hermes Mobile 6 threads, there are even some special Japanese cooked ROMs if i remember correctly. Also check user signatures for what versions are different people using...
thanks so much! i managed to get the USIM screen gone with your help.
Ahh i see, but install new version wont it also change the radio? wasn't that dangerous?(sorry if i ask dumb question)
so if i chose this for example: http://forum.xda-developers.com/showthread.php?t=359458 i can still make it with Japanese IME?
i think i will try hehe!
that link you provided is Schap's WM6 Pro 4.31 ROM... It is one of the most stable out in the wild, and it comes without radio, so flashing that one should be safe.
Oh ok thank you! then i will try this.
Last question before i do anything
This that ROM it is still possible to do the Japanese IME thing?
I found this thread
http://forum.xda-developers.com/showthread.php?t=298919
It explains something of getting japanese on phone, was this what you meant by japanese IME? or is there an other method, if yes, please telle me/ give link.
Now time to have your Hermes speak Japanese
Japanese fonts
Use the excellent work from Asukal, that you can find here:
http://www.asukal.jp/WM5/LetsJapanNo5.zip
I did have a problem with it: once I executed it, I could not sync with my Exchange server (Quite a pain for my push email account...)
Asukal found the solution: edit the registry, and change
[HKEY_LOCAL_MACHINE\Software\Mobem\CE-Star] "MyNLS" = "\windows\wince.nls"
Japanese input
Not using for myself, but these work perfectly (I tried):
http://www.asukal.jp/WM5/BagojsINPUT.zip
*** EDIT
If you prefer a Japanese input without the annoying "Floating bar", ie just the same input way as your original WM5 Softbank ROM, just downlaod and install the "MS IME31 J" link from Asukal's page:
http://hn801.hkes.com/Data/SIP/IME_31J_QVGA_F.zip
Click to expand...
Click to collapse
THANK YOU!
That solution you mention should work fine, but newer solution is available. Check http://forum.xda-developers.com/showthread.php?t=445550
Hi! THank you very much! i was finally able to flash the ROM!!
And i have installed the Japanese fonts and Input thing!
It works. but after install i can not sign onto MSN Live Messenger. Is there anyway to fix this problem?Maybe i should change something in Regedit?? Or should i uninstall the fonts again? :/
It gives me this message: There's a Connectivity problem. Make sure you're in an area with good reception and try again.
I have tried over and over and WIFI is up and working..
So any answer i would be so greatful and finally be able to use the phone like i dreamed of !
Thank you.
sorry, i dont use msn, i have no clue about it...
明けましておめでとう。
Ok thank you anyway!!
明けましておめでとう〜
良い年でありますように♪o(^-^)o
hi
I've a SPV C100 bought from orange france
I tryed to upgrade by another rom
when upgrading begin it's stoped at 13%
and restart i got a splash screen (start up orange logo)
I tryed most of rom but upgrading stops at 4% or i got invalid vendor ID
now i can't use my phone if someone can help me
Did my phone die?
I need orange rom fr original or another solution
I'm waiting for your answers
please help me!!!!
IMEI:359534005798165
S / N:SZ645F804879 A
P / N:99HCD060-00
HTC Innovation
Hello,
You should read before trying to flash your device. There is sticky post in the forum who contains a lot of important informations about Hard SPL.
About the original orange Rom i don't know where to find it.
fla242
after a lot of search, finally I got here and read this post...
I encountered the same problem, and I think my phone is 80% dead!
My phone was unlocked, but carelessly, I didn't complete the hard-SPL flash procedure and flash a new ROM directly, so it is dead...
I downloaded an original Orange ROM, but process stopped @4%, and returned "INVALID VENDER ID". Is there anyway that I can flash a new ROM?
Now my phone can enter the rainbow screen only, and it reads:
ONBL 1.08.0000
SPL 1.08.0000
Any experts here can offer a solution? Can I flash rom via SD card, and how? Really really appreciate your help.
SPV C100 was reborned!
I just can't hide the excitement when I finally flashed a ROM back to my phone.
This model is already quite old. Not sure if anyone still encounter the same problem. Anyway, I'd like to share how I did it, just in case it still helps you.
The key point is called "HTC Goldcard". It is made of a normal Mini-SD card, but it helps you to get a super-CID in tri-color mode.
Google it to find more details, and I am sure you guy can work it out yourselves. You could PM me as well, if you understand my Chinglish
how
how o make htc gold card for spv c100
l have not find any thing
imyels said:
I just can't hide the excitement when I finally flashed a ROM back to my phone.
This model is already quite old. Not sure if anyone still encounter the same problem. Anyway, I'd like to share how I did it, just in case it still helps you.
The key point is called "HTC Goldcard". It is made of a normal Mini-SD card, but it helps you to get a super-CID in tri-color mode.
Google it to find more details, and I am sure you guy can work it out yourselves. You could PM me as well, if you understand my Chinglish
Click to expand...
Click to collapse
The HTC GoldCard is a great way of rescuring a WM smart phone or ppc,it not only works on c100,but also other HTC mobile sevices
please tell me is there any way torecover spv c100
Here you can find a few Oxygen ROMs