Hi,
In Every ROM with WM6 and WM6.1 I got this trouble.
My QTEK S200 works fine with MW5 , when I install a WM6 ROM the sound dissapear.
First my QTEK S200 (HTC Prophet)
IPL: 2.20.0001
SPL: 2.20.0001
Radio: 2.47.21
OS: 2.20.7.35 WWE Korand 3.1 WM6.1
Protocol: 4.1.13.24
2 GB SD
Software Installed:
Coreplayer 1.1.0
SPB Weather 1.0
Oxios Memory 1.40
Battery Status 1.04.203 beta4
Windows Live for Mobile 10.6.0033.0600
How this happen...
1.- The Sound dont work, The Speaker.
2.- I can recibe call and call. But incomming call theres no sound only Vibration.
3.- When this happend I try to Open CorePlayer or any software for media and give a error " Wave Output: Devide Error !"
4.- Reset , the sound come back but...
5.- After this the ENDCALL Button works bad, after pressing this sound like a chime.
I got to rollback to WM5 and the trouble never come again.
I try a lot of things Reset, Flash , Reflash , Another ROM , bla bla...
And I confirm this only happen with WM6 and now WM6.1
I Think this is a software trouble , no hardware because when I turn the Volume down the weird Chime Sound go down too.
Please Gullum , HMA4 , Korand, Cloudyfa ... help me ... I dont know what to do ...
Seems only you have this problem, try to read step by step guide to upgrade again then flash to Korand 2.6 WWE, if the problem still happen, it must be your hardware problem.
IN your signature :
IPL: 2.20.0001
SPL: 2.20.0001
Radio: 2.47.21
OS: 2.20.7.35 WWE Korand 3.1 WM6.1
Protocol: 4.1.13.24
How can Korand 3.1 using SPL 2.20.0001 ??? when using korand 3.1 the SPL should be 2.g3.4pda.
To me it seems to be a software conflict. Try to keep your ROM clean after a reflash for some time. If you have this problem without any additional software installed, then the problem is with your Prophet (as you being the only one reporting) but I can't imaging because things work fine with WM5.
So give it a try and don't install anything exept your ROM.
@tb:
He probably used JumpSPL to flash, that utill don't change the SPL but bypasses it only once.
Looks like a radio Problem. change your radio, I think it will help just give it a shot ..
thanks guys
thanks for your comments ... since yesterdar I do a HardReset and work with the rom clean ...
Everything goes ok ... But lets see...
If the problem appears again I will notice you..
Thanks again..
PS HMA4 when you gonna bring to life a new Crystal ?
gzprophet said:
thanks for your comments ... since yesterdar I do a HardReset and work with the rom clean ...
Everything goes ok ... But lets see...
If the problem appears again I will notice you..
Thanks again..
PS HMA4 when you gonna bring to life a new Crystal ?
Click to expand...
Click to collapse
Hi, I can the same problem. I have korand 6.1 WW3. This problem is the same with Shadow (all version), Korand, etc. Do you find the problem? Im sorry for my poor english.
I have the same problem. It's not a big deal - happend only once or twice and after softreset the problem is no more. Using Konrad's 2.5.
Another problem that's more of a pain in the ass is that my prophet hangs once in a while. At times, when I press the power button to get it to standby mode it just won't turn back on - I have to soft reset it.
Problems such as not always working are something you must accept is going to happen when you put software on a device that it is not designed for. People like gullum and Cloudyfa try to remove as many problems as possible, but they will happen. Nothing can be done to prevent all problems, but the experts can sort most of them.
l3v5y said:
Problems such as not always working are something you must accept is going to happen when you put software on a device that it is not designed for. People like gullum and Cloudyfa try to remove as many problems as possible, but they will happen. Nothing can be done to prevent all problems, but the experts can sort most of them.
Click to expand...
Click to collapse
Yup, and we are pretty much aware of it But the guy was just pointing out the problem, so saying what you have said is quite pointless. Let's just try to work out the problems we can work out and try to "live" with the rest.
My comment was more about this:
Another problem that's more of a pain in the ass is that my prophet hangs once in a while.
Click to expand...
Click to collapse
me and my brother changed to WM6 and we both get the same problem that the sound goes off after some while and then i have to soft reset and then the sound comes back ,, this is a serious problem please try to find a solution
thank you
What ROM did you upgrade to?
Again ...
Hi , me again ...
I do a hard reset , work some days with a clean rom and the problem appears again ...
Clean ROM = No Sync, No Soft , No Apps , no Nothing !!!
A lots of tests ... So I Confirm that this problem is the ROM maybe the OS , some driver etc. WM 6 or WM 6.1.
I try to work some days without a SIM and the problem never come ... Maybe this can use as a clue for a solution.
I dont know what more I can do...
If HMA4 , Korand, Gullum or Cloudyfa need me as a tester for a solution to this problem I do it ..
Hi guys, I am experiecing the same problem.
Mine is a Dopod 818pro with SPL 2.20 and Radio ROM 2.69
Please advise your ROM versions to see if any clues.
Please Help !
Gullum, Cloudyfa, Korand, Hma4 and others developers ... please help us
I know of this problem with some builds and the workaround is to goto phone > menu > options and set kaypad of so no sound comes when pressing the numbers of the dial pad. some builds have the problem of disaparing sound after pressing in about 30 - 40 numbers on the phonepad.
Thanks Gollum
Thanks Friend...
So , you tell me if I turn Off the keypad tones the problem dont come back ?
But what about the Chime Sound when the Endcall button is preset ?
In my phone i Got the weird sound of the endcall button after the problem of the sound goes away ... a Soft Reset and the weird sound come ..
If you want in some solution for this I wanna help you as a tester..
Thanks again gollum
It sounds I was caught by the same problem, at least by looking. I got no sound from my phone speaker now. This happened after I try to play music through the Nokia BH801 BT headset. I installed a bunch of program but none works, and i lost sound after I installed BT 3900. Don't know if that's the reason, but I couldn't access bluetooth manager through BT 3900 indicating " insufficient memory". Plus, I got two BT icons in "connection" page now
I would like to remove BT 3900, but wasn't able to locate the file. I read the Enable_MS_BT.cab could do the job, but just can't find the file.
Please give me some clues to solve this frustrating problem. Thx a lot
...
I think that your problem is other ...
But why you dont try a Hard Reset, if the problem is Logical or Soft Driver , a Hard Reset maybe can be the solution ...
Try this ... and see if your Speaker come to life again.
so what is the solution ,,, now more than 10 people have the same problem but no solution????????????????? (((((
Related
Dear all,
I have tested the WM2003SE (Version_2.06) for some days now and finally found out that one (or the combination) of these extra applications in the Extended Rom will surely KILL the phone functionality if you ever happen to soft-reboot the device while in landscape mode. Here is the list of suspected incompatibles.
- BTPSKeyUpdate_003
- cm_rm_map_o2_v3
- CprogHook.WM2003_2577
- DelAddStarMenu_092404.sa
- delshortcut
- LoadDialogInit_MS_10150402.sa
- startmenu_103wwe
I am absolutely sure that one of these will cause serious device hang once we ever happen to soft-reset while in landspace, but I'm not sure which one. So if any of you have these software installed in version 2.06, please try your best to aviod reseting while in landscape.
BTW, if you happen to know any of these software's intended uses, please also let me know since I"m not sure whether removing them can cause malfunction in other areas. Thanks
Hi there,
thanks for the alert. But i don have the problem like you said. I soft resetted my 2.06 more than 10x in landscape mode but still no reset/hang/idle/trojan virus.....
Guess i'm just a bit lucky!
:lol:
BTPSKeyUpdate_003 - cannot cause hang. It is used only once just after hard reset
cm_rm_map_o2_v3 - some O2 customisations. May cause hang.
CprogHook.WM2003_2577 - my program. Conflicts with some programs and may hang your device on boot (device simply stops responding to keys/stylus). To check this - delete \windows\startup\cproghook.exe and reboot. On most of devices it works fine, but have problems in landscape mode.
DelAddStarMenu_092404.sa - ?
delshortcut - ?
LoadDialogInit_MS_10150402.sa - this is a patch for 2.20CHS OS. Should not be used on other ROMs, but it should not hang your device.
startmenu_103wwe - ?
I've seen that removing SD-card during boot helps sometimes.
did any one faced this?
it happend twice!
my phone shows good signal reception but when some body calls in it will say "can not be reached" like it is off or no signal!
and i also can't make phone calls at that stage!
some thing is killing my phone!
i have tried both radio stack 1.14 and 1.18 and i happened in both.
now i am trying radio stack 1.14 from ROM 1.72! it seems it is not the same 1.14 from mamaich rom. by using hex editor i found that mamaich radio stack version is 1.14a!
what do you think guys?
BEWARE of changing ur radio stack.. 90% ur will have a dead phone once u wake up
Re: did any one faced this?
ammar said:
it happend twice!
my phone shows good signal reception but when some body calls in it will say "can not be reached" like it is off or no signal!
and i also can't make phone calls at that stage!
some thing is killing my phone!
i have tried both radio stack 1.14 and 1.18 and i happened in both.
now i am trying radio stack 1.14 from ROM 1.72! it seems it is not the same 1.14 from mamaich rom. by using hex editor i found that mamaich radio stack version is 1.14a!
what do you think guys?
Click to expand...
Click to collapse
Yeap, your suspicious is very true. Both of them are different. But how different is different would need mamaich to answer how he first got this radio stack!!
:lol:
i used 1.08 radio stack... no problems here.... downgraded it from 1.17
Microsoft Voice Command
Anybody encounter problems with MS Voice Command in WM2003SE ROM?
When I soft re-set the XDAII device, it sorts of hang the devices. Always need me to soft reset a few times. I've since remove it and soft reset is ok.
MS Voice Command in WM2003SE ROM
:arrow: MS Voice Command in WM2003SE ROM working great !
I have upgraded and downgraded many times, never with a failure. I just upgraded to PDAVIET 4.0003. Went without a hitch but now my phone will not stay on the network, also it will every few minutes complain that there is no sim card. Card is fine as tested in my other phones. The interesting part is it functions fine on any 2.2 ROM.
Tried Smart1's True's and all PDAVIET, no WM6 allows the phone to work.
Cold resets don't resolve the issue. Is there something that could have gotten corrupted that is part of the phone OS and not in the ROM's?
I am at a loss to troubleshoot this issue.
Thanks for reading, any advice/suggestions is appreciated.
ron1n, what is the network protocol for your provider?
Do you use pap or chap, the setting choice in CommManager?
Is network set for auto in phone dialog?
In your connection settings, do you use Server assigned ip address or auto?
Since i have upgraded to PDAviet i have almost the same problem.
After soft-resetting my device no gsm connection is found.
The only solution is to go into phone option and start the manual search.
If it's connected it works without any problems.
Strange thing....I also tested a few gsm roms but always the same experience.
R0N1N said:
I have upgraded and downgraded many times, never with a failure. I just upgraded to PDAVIET 4.0003. Went without a hitch but now my phone will not stay on the network, also it will every few minutes complain that there is no sim card. Card is fine as tested in my other phones. The interesting part is it functions fine on any 2.2 ROM.
Tried Smart1's True's and all PDAVIET, no WM6 allows the phone to work.
Cold resets don't resolve the issue. Is there something that could have gotten corrupted that is part of the phone OS and not in the ROM's?
I am at a loss to troubleshoot this issue.
Thanks for reading, any advice/suggestions is appreciated.
Click to expand...
Click to collapse
Reflash Radio ROM (2.47.21 or 2.69.21 will work)
To reply to all of your suggestions. I have tried 5 different radio roms, none will see the phone network (GSM not GPRS) for more than a few seconds with a weak signal, then they fail and either go to flight mode or say that the SIM is missing. To reiterate, this was working fine up until yesterday with a few different WM6 ROM's. Coincidentally, the rear speaker failed at the same time. I resolved that issue, but the lack of phone service persists, although all AKU 2.2 ROM's work fine. Very curious....
DeviLduck said:
ron1n, what is the network protocol for your provider?
Do you use pap or chap, the setting choice in CommManager?
Is network set for auto in phone dialog?
In your connection settings, do you use Server assigned ip address or auto?
Click to expand...
Click to collapse
It is CHAP, although I am referring to the phone service not wireless GPRS. My network is configured for auto, although if I switch to manual (due to the lack of consistent conntection), it will not be able to see any networks, except briefly and intermittently.
Cheers
WM6 Sim Card issues [solution, use radio rom 2.19.21]
I've been using WM6 for awhile now, I've tried SMART1.3, PDAVIET 4.0.0.01, 4.0.0.0.3,4.0.0.0.3a and finally 4.0.0.0.4 .. but yesterday i tried to flash back to SMART1.3. After downgrading and upgrading, i got unknown sim status ! since yesterday , I've change my Radio Rom and OS ( I've tried almost everything ) but i can't get my phone to work in WM6 !! when i flash back to wm5 ( any AKU 2.2 version ) i have no problem with phone or GSM but as soon as I upgrade to WM6, I got unkown Sim status ... anybody , have any Ideas ?!!
Same Problem !
I have exactly the same problem !! it's not from radio ROM or OS !! I've tried 3 different version of radio ROM, and almost every single WM6 OS that is out there ! my phone stop responding yesterday after i changed my OS from PDAVIET 4.0.0.0.4 to SMART1.3 ! since then I've tried everything, but I can't get the phone to work in any WM6 OS! although WM5 (any version of it) is okay !
hma4 said:
I've been using WM6 for awhile now, I've tried SMART1.3, PDAVIET 4.0.0.01, 4.0.0.0.3,4.0.0.0.3a and finally 4.0.0.0.4 .. but yesterday i tried to flash back to SMART1.3. After downgrading and upgrading, i got unknown sim status ! since yesterday , I've change my Radio Rom and OS ( I've tried almost everything ) but i can't get my phone to work in WM6 !! when i flash back to wm5 ( any version) i have no problem with phone or GSM but as soon as I upgrade to WM6, I got unkown Sim status ... anybody , have any Ideas ?!!
Click to expand...
Click to collapse
Did it used to work?
Yes , it used to work ! I've been using WM6 for more than 2 weeks with no problem! recently I upgrade my os to PDAVIET 4.0.0.0.4, but I decide to change the OS back to SMART 1.3, after I changed it back, i got the error "Unknown SIM card , without the pin you can call emergency calls only" I tried my pin and PUK , but none works ! So i changed the OS to WM5 again. I've tried couple of different version of WM5 (JESTER, NVID) and I've found the phone works perfectly in wm5 !! as I said before I tried re-flashing my Radio ROM, but it didn't help !! i still can't get my phone to work in WM6 ! any of Pocket PC gurus, have any suggestion ?
S200 Gone Wacko with WM6 and I don't know why
Hello people
Okay so here is the situation, since about last week I have been using PDAViet 4.0.0.3 on my Qtek S200
Now I love this ROM..so much so that I spoon with it at night...um...crap lol Its fast and lite...but something went terribly terribly wrong yesterday
So around 1pm I disconnect my phone from my computer, and notice a "X" in the data connection arrows...okay I thought nothing of it. I go to a restaurant, get a phone call from my brother, and talk, and everything is fine. From there it went bonkers...it kept on trying to connect a GSM signal, and then would go out to no service...it would keep on trying and trying, and bogging down my phone....
So finally i got it stablize (with an EDGE data signal i thought) and of course a voice signal and went on my merry 2 hour drive back home to Montreal.
When I got to Montreal and was waiting in the dead moving traffic jam, I wanted to check the Windies cricket score on BBC, so I take out my phone and try to make a data connection. But again the X showed...i rebooted my phone and signal about 10 or 20 times, and finally got something...however by the time that happend I had arrived at home so i went and used my computer.
The GSM signal stayed, but I dont know if I had a data connection. I then went to a funeral, turned off my radio entirely, and then when I turn it back on...ooooooooo no signal...it would get 2 bars, and then drop, and then 2 bars "E" symbol, and then drop.
So from then on, i went nuts, opened up the back, took out the battery, checked the sim, installed another sim to make sure..and by now it went even worse..first INVALID SIM...then it went to MISSING SIM...urge to kill rising!
I finally said F it, and hard resetted my phone...but i noticed something upon the screen calibration..."NOTIFICATION ERROR...cannot find calnot.exe". After hard resetting and such, the problem still showed...
This morning, after leaving it overnight, it was still misbehaving...so I went to took it back down to the floating NVID file found here on XDA developers...and oddly enough...no more calnot.exe error...the radio signal is strong, and i get a data connection...So i tried to then upgrade to the new PDAViet 4.0.0.4s ROM, but again...calnot.exe error...so finally i am stuck at the NVID ROM...oy!
So I searched here on XDA Developers and on google...now while people have said they get the calnot.exe error, they also get this reglog.dll (or something to that effect) error as well...me on the other hand am only getting that calnot.exe error, which would seem to be the root of my problem.
What can I do fix this, and get back to the speedy 4.0.0.3 ROM (man I love that ROM)
Phone info:
ipl: 2.09
spl: 2.20.0000 (so I guess that my Qtek S200 is a G3 model)
radio: 02.47.21 (i even moved up to 02.69.21)
os: 2.20.7.34
so i really appreciate the help guys...take care...
*howls like a wolf*....nothing?
hofo_mofo said:
*howls like a wolf*....nothing?
Click to expand...
Click to collapse
Flash again the WM5 NoVid Rom,hard reset and if you come up with the same error,hard reset again... Tell me what happens... If it works flash PDAViet 4.0.0.0.3a...
Holy S*** I have the same Problem for like two weeks!!
Man , I have exactly the same problem !!! exactly !! i had PDaviet 4.0.0.0.4 and one day I got the same thing, No signal , then after i hard reset, the Calnot error ! then Hard reset again, and this time I got the replog error !
I get "Unknown Sim Card!" or "Unknow Sim Card status enter your pin" whenever I install WM6! My phone works perfectly in Wm5 though !!
I flashed radio rom in WM6, I also tried different sim Cards , but none works !I can not get the phone to work in wm6!
By the way, NVID is not a good rom to stay with.
tonydeli7 said:
Flash again the WM5 NoVid Rom,hard reset and if you come up with the same error,hard reset again... Tell me what happens... If it works flash PDAViet 4.0.0.0.3a...
Click to expand...
Click to collapse
Still the same thing...i have treid 4.0.0.0.3a, 4.0.0.0.3, 4.0.0.0.4, 4.0.0.0.4s, 4.0.0.0.4sse, and Mobiz 2.0b3.....all nothing...
Sometimes it would be calnot.exe notification error, or replog.dll, or now clocknot.exe error...so far only NVID works
hma4 said:
Man , I have exactly the same problem !!! exactly !! i had PDaviet 4.0.0.0.4 and one day I got the same thing, No signal , then after i hard reset, the Calnot error ! then Hard reset again, and this time I got the replog error !
I get "Unknown Sim Card!" or "Unknow Sim Card status enter your pin" whenever I install WM6! My phone works perfectly in Wm5 though !!
I flashed radio rom in WM6, I also tried different sim Cards , but none works !I can not get the phone to work in wm6!
By the way, NVID is not a good rom to stay with.
Click to expand...
Click to collapse
In a way I am glad you are having the same problem...so I know I am not a nut lol (and nor am I alone)...but of course its not good to relish in someones downfall, so of course it is also a bad thing eh..
What ROM would you suggest then? NVID seems alright, but I don't know of any others out there (well somewhat)...thanks!
I wish we knew why it happened at first place!
for wm5, if you want a clean, fast and reliable Rom, try Jesterz Rom
http://forum.xda-developers.com/showthread.php?t=284578
you might want to re flash the start-up image to HTC logo... you can find the .cap in the same thread.. I also updated the radio rom too, you can find it in prophet wiki.
Jesterz Rom is nice cause you don't have to uninstall anything, it's really clean and stable. it is by far better than NVID, but don't ask why cause i have to ramble a lot.
Oh by the way if you found out why this happened to us .. let me know
hofo_mofo said:
Still the same thing...i have treid 4.0.0.0.3a, 4.0.0.0.3, 4.0.0.0.4, 4.0.0.0.4s, 4.0.0.0.4sse, and Mobiz 2.0b3.....all nothing...
Sometimes it would be calnot.exe notification error, or replog.dll, or now clocknot.exe error...so far only NVID works
Click to expand...
Click to collapse
Try flashing PDAViet WM5 Temp
http://rapidshare.com/files/32728615/Prophet_PDAViet_Step1.zip PASSWORDDAVIET
or PDAMobiz WM5 Temp......
http://www.sharebigfile.com/file/178269/fantastic-b3-Step1-rar.html
and then try to flash truneytral's WM6 if you haven't already...
http://www.savefile.com/files/763142
If you don't want russian keyboard ,just follow DEVILDUCK's procedure here http://forum.xda-developers.com/showthread.php?t=302067&page=18
and follow the guide
http://forum.xda-developers.com/showthread.php?t=310452(just flash one of the above Wm5 temp roms,instead of NVid)
tonydeli7 said:
Try flashing PDAViet WM5 Temp
http://rapidshare.com/files/32728615/Prophet_PDAViet_Step1.zip PASSWORDDAVIET
or PDAMobiz WM5 Temp......
http://www.sharebigfile.com/file/178269/fantastic-b3-Step1-rar.html
and then try to flash truneytral's WM6 if you haven't already...
http://www.savefile.com/files/763142
If you don't want russian keyboard ,just follow DEVILDUCK's procedure here http://forum.xda-developers.com/showthread.php?t=302067&page=18
and follow the guide
http://forum.xda-developers.com/showthread.php?t=310452(just flash one of the above Wm5 temp roms,instead of NVid)
Click to expand...
Click to collapse
Okay, I spend another 2 hours to update the phone ! This time i didn't get the
Calnote.exe or replog error !! but my phone still doesn't work !
The phone connection is not stable ! it comes and goes ! and i get " Unknow SIM status. 3 attempts remaining. Only emergency calls can be made without a pin." well i tried different sim card , and i still get the same error !
HELPPPPPPPPP Pleaseeeeeee !
I just Upgraded my phone to ASreg3.3.12, and LvsW Aku2.3 and still doesn't work !!
I get the same error ! the Phone App doesn't function! I get Unknown Sim Status! I've tried NVID, and Jesterz Roms , both AKU 2 and both work fine !!
any suggestions ?
Strange, however, can you post which radio version you have when you switch roms ? it could a radio rom problem....
Several months back, I was looking to upgrade my G3 Prophet (Imate Jamin). I had one serious problem with all the WM6 ROMs I've tried, as well as with Aserg's3.3 ROM.
The phone will intermittently not recieve calls. The caller is quickly diverted to voice mail, and I get no ring, no notification of a missed call, and no message waiting indicator. As a surgeon who's on call a fair amount, this was unacceptable. Problems with contacts or wifi settings I could work through.
I went from Fantastic Mobitz 1.1i to PDAViet 4.0.0.0.3 to Aserg 3.3 without resolution. I have tried Radio ROMs 2.20.21, 2.47.21, 2.61.21, and 2.69.21 without success in all of them.
In the end, I downgraded to the latest shipped WWE ROM, which was AKU 2.2. This has been fairly stable, but as I look at the newest Touch ROMS, I can't help but feel a new case of ROM envy coming on.
Has anyone had the same problem with the early Crossbow ROMs? If so, has it been fixed in the later ROMS? I know there are lots of people out there who have never had any missed call problems, so my question is only for those few people like myself who missed calls with early versions of WM6. Was this fixed in later versions? Specifically, which ones?
Much thanks,
Alan
Gave in to the temptation.
After waiting a few days for a reply, I couldn't resist - I flashed Prophet Touch X when it became available.
I love the ROM - Fast, nifty touch features, Cube, etc.
However, I still have the same problems - I frequently and intermittently do not receive calls, there is no missed call indicator or missed phone numbers showing.
Does anyone know the cause or a fix? I can't bear the thought of going back to WM5!
My device is a G3 Prophet (Imate Jamin):
IPL 2.20
SPL 2.20.0000
Protocol 4.1.13.24
OS 10.0.0.0
EXTRom Prophet Touch X
Alan
adsbar said:
After waiting a few days for a reply, I couldn't resist - I flashed Prophet Touch X when it became available.
I love the ROM - Fast, nifty touch features, Cube, etc.
However, I still have the same problems - I frequently and intermittently do not receive calls, there is no missed call indicator or missed phone numbers showing.
Does anyone know the cause or a fix? I can't bear the thought of going back to WM5!
My device is a G3 Prophet (Imate Jamin):
IPL 2.20
SPL 2.20.0000
Protocol 4.1.13.24
OS 10.0.0.0
EXTRom Prophet Touch X
Alan
Click to expand...
Click to collapse
Which rom do you use for step 1 ? try to flash with another NVID Flash step 1 or PV_temp then flash to WM6. otherwise you can try to change the radio rom to 2.19
If the problem still exist, i think your phone is having problem with the Radio hardware.
adsbar said:
After waiting a few days for a reply, I couldn't resist - I flashed Prophet Touch X when it became available.
I love the ROM - Fast, nifty touch features, Cube, etc.
However, I still have the same problems - I frequently and intermittently do not receive calls, there is no missed call indicator or missed phone numbers showing.
Does anyone know the cause or a fix? I can't bear the thought of going back to WM5!
My device is a G3 Prophet (Imate Jamin):
IPL 2.20
SPL 2.20.0000
Protocol 4.1.13.24
OS 10.0.0.0
EXTRom Prophet Touch X
Alan
Click to expand...
Click to collapse
u listed everything but the radio rom. Try different radio version.
2.20.x prob good for balance.
2.69.x is hte newest radio rom, a bit harsh on the battery consumption
2.19.x is old, might not work on all the gprs stuff.
JUST me experince, YMMV.
I have a imate just like yours, same IPL/SPL.
never had that problems and always flashed my imate with G4 step 1 roms.
regards
RP
tb146 said:
Which rom do you use for step 1 ? try to flash with another NVID Flash step 1 or PV_temp then flash to WM6. otherwise you can try to change the radio rom to 2.19
If the problem still exist, i think your phone is having problem with the Radio hardware.
Click to expand...
Click to collapse
Sorry, had a lapse there..
My RadioROM is 2.47.21. I had tried multiple RadioROMs before in earlier WM6 versions, with no change. On the other hand, some other threads that seem related have had success with 2.19.21, so I'll give it a try. I don't use GPRS for anything anyway.
One question on that - I know you don't lose any data flashing a RadioROM, but one thread mentioned having to hard reset after the flash to get the new RadioROM functionality. Is this true? (Hoping not)
Alan
adsbar said:
Sorry, had a lapse there..
My RadioROM is 2.47.21. I had tried multiple RadioROMs before in earlier WM6 versions, with no change. On the other hand, some other threads that seem related have had success with 2.19.21, so I'll give it a try. I don't use GPRS for anything anyway.
One question on that - I know you don't lose any data flashing a RadioROM, but one thread mentioned having to hard reset after the flash to get the new RadioROM functionality. Is this true? (Hoping not)
Alan
Click to expand...
Click to collapse
Radio rom is seperate. Like bios, you dont format HDD after upgrade bios. It's safe to upgrade without hard reset. However it doesnt hurt to install latest ROM also (which requires hard reset) Also what kinda 3rd party software you installed on there? commonly when prophet is in data mode, sometime voice doesnt come in, might be something doing that without you knowing.
Yes, that is true.
Radio ROM is not involve with OS ROM, you can flash your radio ROM to any version without effecting to the OS ROM and no need to hard reset.
Hard reset is only for upgrade and downgrade the OS ROM.
I have flashed to any radio ROM without Hard Reset.
Each Radio ROM has different configuration, so it can effected your battery drain because the receiving signal can be different at any radio rom.
we assume the latest radio rom is better than the earlier version but the best things, you can try all the available Radio ROM which is fit to your need.
Cheers,
I have the same problem
I have the same problem - my Imate Jamin (Prophet G3) started to miss calls from time to time after I upgraded to WM6. Tried multiple RadioROMs and multiple ROMs - no effect whatsoever
I have the same problem, but i don't know the solution.
2.19.21 is the solution for me.
rublin said:
I have the same problem - my Imate Jamin (Prophet G3) started to miss calls from time to time after I upgraded to WM6. Tried multiple RadioROMs and multiple ROMs - no effect whatsoever
Click to expand...
Click to collapse
Sorry for so long to reply, but I wanted to make sure...
Since downgrading my RadioROM to 2.19.21, I have not had the missed call problem. The last time around on WM6 I tried everything from 2.20.21 on up to the latest without any improvement.
If you haven't tried 2.19.21, try it.
As a side note, I feel the Prophet Touch X ROM works great now, and I'm experiencing no bugs. However, the battery drain is more than the WM5 WWE.
YMMV
Alan
i'm a newbie
i'm to excite to upgrade my new 818 pro G4 WM 5 which i bought last week..i read few post regarding on how to upgrade into WM 6..then..
1stly i've tried the upgrade package,click the hardSPL,works well after that..but i'm quite lost for step 3 & 4..so i just stop there..
i noted that my SPL change into 2.G4.4PDA
then i read korand post, bout that new rom..i've tried it & it works well,my 818 pro with WM 6..
at the same time, i try to upgrade my IPL into 2.20 but after download it,my avast detect trojan in it..so i just leave it
then i read bout crystal rom..get so excite with the features & function (also the touchflo)
so i upgrade it..
now is the problem..
after i make the hard reset (camera button, comm button & on/off (soft reset button) & reset button below(next to usb/cable slot)..
i STUCK in boot screen which shows
IPL 2.15.0001
SPL 2.G4.4PDA
GSM 02.19.21
OS 6.0.0.255
it just stuck there,no led light..
i've tried upgrade rom back to normal,but no avail as my activesync cannot detect my device.
i've tried the hard reset for few time,yet nothing happen..still the same
searchin for help in wiki,yet still no solution or maybe i'm to panic
plz help me to restore it,or maybe make it alive as normal again..
Finally !!..i've made it
for overnight i searchin & lookin how to restore my device..
(not enough sleep )
this is how i do it instead doing the usually hard reset..
my device is on & the usb cable from my device connect to laptop..
yet still stuck at the boot screen..then
i press the green button (to make phone call) + comm button + soft reset (on/off button) all a the same time (those 3 button only)
then my screen turn into 3 different color..red,green or blue (i dont quite remember already hihihi)
so, i use the 'korand' rom update utility to restore it..with his wm 6 rom
waallaa..my 818 pro is alive again...with wm 6 !!
thanks to korand for his rom, or from whomever the contributer..thank a lots !!
i think i still wanna upgrade into different type of rom..
but my SPL looks different then normal SPL i've see..
SPL 2.G4.4PDA
can anyone could lead me where can i get IPL G4.zip free virus?
well, hope this post could help others who face the same problm as mine..
next time i'll be MORE carefull..
bye..
duato said:
for overnight i searchin & lookin how to restore my device..
(not enough sleep )
this is how i do it instead doing the usually hard reset..
my device is on & the usb cable from my device connect to laptop..
yet still stuck at the boot screen..then
i press the green button (to make phone call) + comm button + soft reset (on/off button) all a the same time (those 3 button only)
then my screen turn into 3 different color..red,green or blue (i dont quite remember already hihihi)
so, i use the 'korand' rom update utility to restore it..with his wm 6 rom
waallaa..my 818 pro is alive again...with wm 6 !!
thanks to korand for his rom, or from whomever the contributer..thank a lots !!
i think i still wanna upgrade into different type of rom..
but my SPL looks different then normal SPL i've see..
SPL 2.G4.4PDA
can anyone could lead me where can i get IPL G4.zip free virus?
well, hope this post could help others who face the same problm as mine..
next time i'll be MORE carefull..
bye..
Click to expand...
Click to collapse
I just have one thing to say you play with your "IPL" when you don't know what you are doing and you brick your phone for real !! and I mean you will brick it as like it wont even turn on !! don't think about playing around with IPL. your SPL is fine. it's HardSPL now. you can upgrade other roms, just read the wm6 guide , follow step by step and you will be fine.
one more time, if you like your device and you want to keep it (and use it) don't play around with it's IPL
true..totally agree with you..
well, i guess i do like this kind of tech..i'm fast learning (usually from mistakes) risk always be my companion ..
one thing i'm curious about..if i want to upgrade to any other roms, should i upgarde my IPL 1st?..just like i try to use your personal crystal rom..why didnt i make it well, even though i follow the instruction step by step?
After i using those Korand's rom..everything is fine except my battery !!
i charging it & i notice that my device is getting hot !!..
i know this is not well..so i need to upgrade into others roms which more suitable with my device..
Thanks hma4 for your concern
___________________
HTC Dopod 818 pro
yup..better dont disturb the IPL
on second thought,it wisely not to disturb the IPL as you've mention except for those a genius
bout the battery,after few reset.. it back to normal..no hot anymore
i think i better stick with this rom for awhile.. as it is nice,stable & fast..+ more xtra storage..
In general, just leave IPL and SPL alone. Most ROMs (except WM5) work regardless of IPL/SPL and it's better to avoid bricking/damage.
Hey, I'm having a weird problem when i'm trying to put a new rom in my prophet, but i will explain it better so you can help me understand where is the problem..
The prophet has WM5, ando so when i run the hardspl in the prophet and after the screen goes white so i can upload the new rom it seems that the computer can't detect after a few seconds which is normal, the problem is here that when i'm going to start upgrade the new rom the prophet goes to the original bootloader and the rom doesn't work.. I've already try very times.. but it's always the same the white sreen dissapears. What the hell is happening? can everyone help me? I would be thank full
Problem - Sold. It was the version of the IPL, it wasn't the last version
xfounder said:
Hey, I'm having a weird problem when i'm trying to put a new rom in my prophet, but i will explain it better so you can help me understand where is the problem..
The prophet has WM5, ando so when i run the hardspl in the prophet and after the screen goes white so i can upload the new rom it seems that the computer can't detect after a few seconds which is normal, the problem is here that when i'm going to start upgrade the new rom the prophet goes to the original bootloader and the rom doesn't work.. I've already try very times.. but it's always the same the white sreen dissapears. What the hell is happening? can everyone help me? I would be thank full
Problem - Sold. It was the version of the IPL, it wasn't the last version
Click to expand...
Click to collapse
Does my tool help? http://forum.xda-developers.com/showthread.php?t=353547
Do you mean that your problem solved?
Yes. Thanks anyway. It was the version of the ipl which was 2.10.0001. I did the upgrade to 2.20.0001 and then i was able to doing finnaly the update