Related
Hi All,
I followed the "new" instructions for updating my Prophet to WM6, but now I'm stuck at the boot loader with this info showing:
IPL 1.00
SPL 2.13
Nothing else is displayed, except for the "USB" text at the bottom (which just indicates that it's connected via usb, right?)
I suspect that "HardSPL" step did not work correctly. But it seems that there's no way now to re-try that step, because I can no longer connected to ActiveSync.
If I just try re-flashing the new WM6 ROM, it seems to complete successfully, but I'm just returned to the boot loader again. Hard resetting does nothing.
Any ideas, advice on what to try next?
Thanks.
Ah.... If only I had searched a little bit further! I found these instructions here:
http://wiki.xda-developers.com/index.php?pagename=Prophet_recovery
I've now completed that step, and my Prophet boots again. I'm now re-attempting the upgrade to WM6.
Phew! That did it. I've now successfully upgraded.
search & u will find.... the wiki has the answer...
congrats on upgrading btw....
Hi sinnerman,
I'm facing the exact same problem with my Imate JamIn. I tried everything, but it is still stuck on the tri color screen, could you please tell me which rom in the list you downloaded that fixed your problem?
Thanks.
wessamzeidan said:
Hi sinnerman,
I'm facing the exact same problem with my Imate JamIn. I tried everything, but it is still stuck on the tri color screen, could you please tell me which rom in the list you downloaded that fixed your problem?
Thanks.
Click to expand...
Click to collapse
just flash back to the original rom than use jumpspl to upgrade to the wm6 rom u like...that should be fixed ur problem.....
wessamzeidan said:
Hi sinnerman,
I'm facing the exact same problem with my Imate JamIn. I tried everything, but it is still stuck on the tri color screen, could you please tell me which rom in the list you downloaded that fixed your problem?
Thanks.
Click to expand...
Click to collapse
Sorry wessamzeidan, I don't remember which exact ROM I downloaded... I just followed the instructions from here:
http://wiki.xda-developers.com/index.php?pagename=Prophet_recovery
i saw lot of people have dead prophet problem, so i am here now to make a new thread to all this people and i hope to make it useful.
now we start
** FIRST : lets know names of prophet :
I mate Jamin, O2 XDA Neo, Qtek S200, Dopod 818 pro, Dopod 830, SPV M600, VPA Compact S.
** SECOND : we must know that before we trying to do any updating or change roms on my prophet i just need to do which called unlock for the prophet and then we after that been able to change any rom on my ( jamin ) and of course u need to be careful about Your device is it G4 or G3 ,
# and how we know its G4 Or G3 ?
# when u start Your Device u will see some numbers on left,
---------------------
IPL: 1.00.000
SPL: 2.20.000
GSM: 02.61.21
OS: 3.0.0.0
--------------------
and may be changed and that goes to the rom which You have, now we look for the last number on ( IPL and SPL ) , if we found it ( 0 ) it means You r G3 and if it ( 1 ) so You r G4 .
** THIRD : lets go to unlock , i will put programs in this thread it will help u in unlock.
-- Sync your device with computer and open the file u download it called HardSpl you will find two files one one foe G3 and G4 open your kind then you'll find a file called (( hardspl.bat )) okay, be sure your device is connected to computer then open the file and follow instruction and it will reset your device ,
now u ready to change rom.
TO BE CONTINUED
hey guys
i tried to attachment the file now put it gives me database problem, so i will be after it to attach don't worry pals. see you later.
hey guys
i tried to attachment the file now put it gives me database problem, so i will be after it to attach don't worry pals. see you later.
if any one can help please contact me.
hello
my device is jamin g4
it stopsat the boot loader and dono thing
can u help me please?
my e-mail is [email protected]
and suddenly after trying to update the spl been 1.01
please help me
can i fix it?
waiting for ur help
What is the IPL and SPL?
If the wiki where up, I'd suggest looking at that, but as it is I'll explain it now...
What ROM where you attempting to upgrade to?
To get the device back, I would say "Read the wiki" but it's down!!!
Download this ROM.
In ActiveSync, disable "connect through USB" (File->Connection Settings).
Put the device into bootloader (the three coloured screen) and connect it to the computer using the USB cable.
Run the file you downloaded earlier. This should then install a new ROM.
From there, just wait for it to finish.
Now, it should work!
From there, you could re install the Orange WM5 ROM, or try upgrading to WM6. Make sure you read all the relevant guides first!
thanks alot i did as u said but it stops at 80% or 88%
then show this message (error 326 invalid command )
please help me
i'm feeling bad
my mail is [email protected]
What brand the device? Has it been SIM unlocked?
hi again brothers, pal zerocool. first u must unlock ur device to be able to accept any rom after that and solve pproblems.
first flash this rom its offecial and it solve dead prophet problems.
then make hard spl by program open file called hardspl.bat.
make hard reset.
flash ur rom u want.
make hard reset again.
then enjoy.
i uploaded the hardspl program but i couldnt upload the rom its so big so u can look in ur mail u will find the solution.
u can extract file by any program for zip.and tell me the news
dont forget to look to ur mail. see all of u later
Dead prophet
Hi guys,
I have been using a sh... Nokia sine I broke my prophet G4 in december by upgrading the OS.
I had downgraded first to NVID and then I tried to upgrade and it fails at 95%.
Sine this day, my prophet seem totally dead, no light when plug on both charger or computer, windows do not recognize at all the device because it is turned off. And it really do not seem to charge...
I am living in China now and a guy told me I had to change the PB board...The ost is 100Euros, but I am almost sure I an find another solution...
The weird thing is I cannot charge it at all ( I mean no lights but does it charge a little?).
The guy tested my prophet with another battery and in that ase, it is stuck on the bootloader.
We tried several roms and it always fails at 95% and the error is 200 something, maybe 245 or 243, I do not remember sorry...
Is my phone hardware is dead? or it is just a software problem and I did not see the right guy?
Do I need to buy a new battery? I have read that sometimes the device is not able to recognize it even if it the offiial one and even if it is working on another device...
PLease help me I don't want to loose this phone that I've been using for almost 3 years...
Otherwise I will switch to an iphone but I am not sure to be as happy than I was with my prophet.
Xie Xie for your advice and answers.
Guilh1
Can it enter bootloader at all?
If yes, what are the IPL and SPL?
If not, it will be a hardware problem (may just be connectors to the battery but may be something more).
the only way of recovery is using jtag
but 1st we must discover the location of jtag pins on motherboard
I just do not know because with my actual battery, anything is possible....
when I tried with the guy and a new battery it was blocked on the bootloader, but don't remember the IPL and SPL...sorry
I may be right about the battery onnectors though, but the problems seem to be from the phone connectors or the battery it self???
Thank you anyway for your very quick reply
when I tried with the guy and a new battery it was blocked on the bootloader, but don't remember the IPL and SPL...sorry
Click to expand...
Click to collapse
If it can enter bootloader, it is almost certainly your battery at fault!
Ok so i burnt my battery during the upgrade...
But why is it still blocking at 95% when he tried to put a rom?
With his battery, it was stuck on the bootloader and not possible to install a rom, even a NVID WM5...
I really do not know what to do...
Thanks again for your help
My iMate JAMin is dead; I was in the middle of flashing it when it froze, now when I turn it on, I get the Tri-color screen with the following ...
IPL: 2.13.0001
SPL: 2.13.0001
No [BUSB[/B] is detected. So now I need a way to flash it from the SD Card. I can not even see the HTC startup screen anymore, it just jumps directly into the tri-color screen.
Ok so i burnt my battery during the upgrade...
But why is it still blocking at 95% when he tried to put a rom?
With his battery, it was stuck on the bootloader and not possible to install a rom, even a NVID WM5...
I really do not know what to do...
Thanks again for your help
Click to expand...
Click to collapse
Do you know which ROM? Is your device branded, and is it SIM locked?
Do you know the IPL/SPL? Did they end with the same numbers?
My iMate JAMin is dead; I was in the middle of flashing it when it froze, now when I turn it on, I get the Tri-color screen with the following ...
IPL: 2.13.0001
SPL: 2.13.0001
No [BUSB[/b] is detected. So now I need a way to flash it from the SD Card. I can not even see the HTC startup screen anymore, it just jumps directly into the tri-color screen.
Click to expand...
Click to collapse
Please look at this if you want more help, post here...
thanks alot dear samuraititio
but i can't flash it
it writes (no vender id)
help me please i tried another tool with the same nbf file it stops at 80%
and it automatically enter the boot loader
and i can't do ant thing
its information
jamin/g4
ipl 2.13.0001
spl 1.01
i think my problem is in the spl coz it was 2.13.0001
and now it's 1.01
how can i fix it please i still starter in this way so i'm trying;
help soon please
You now have a G3 SPL on a G4 Device.
What did you flash exactly?
l3v5y said:
Do you know which ROM? Is your device branded, and is it SIM locked?
Do you know the IPL/SPL? Did they end with the same numbers?
Please look at this if you want more help, post here...
Click to expand...
Click to collapse
hello pal i3v5y
i have the same problem
idid what u said the flashing stops at 80%
i need ur help please
i'm online at the moment and u too help me soon if u can please
my e-mail is [email protected]
waiting for u i don't have any other device to use and i need it
l3v5y said:
You now have a G3 SPL on a G4 Device.
What did you flash exactly?
Click to expand...
Click to collapse
now i flashed the official rom of jamin but it stopped at 80%
Hi,
i have a friends I-Mate JAMin (or HTC Prophet)
its a G4, now...it was running WM5, so i put HardSPL on it, went to flash a WM6.1 rom and now all it does is sit at the tri coloured screen, it seems like the HardSPL has done nothing, because the SPL is still the old numbers (the originals, it hasnt changed to 2.G4.4PDA, or whatever its suppose to show)....
I need help ASAP, i cant go back to my friend and tell him his phone is stuffed..
PLZ HELP, ANYONE....PLZ
hi,
did u try this
http://forum.xda-developers.com/showthread.php?t=353547
yep, tried that.
i actually cannot boot into a OS on the phone,
when it turns on it goes straight to the Tri-Coloured screen, i need some desperate help with this,
i have put HardSPL on there but the SPL version on the tri-coloured screen numbers have not updated to a new version,
i installed an update to the IPL version, so that has gone up to 2.20 or something like that.
the SPL number is currently 2.13.0001
i cannot get past the tri-coloured screen.
PLZ PLZ PLZ PLZ PLZ help, is the phone stuffed?
how do i fix it?
Dont Worry
If your scree show RUU and you see USB in the left corner when connecting USB - then dont worry.
Just fksh it with a NVID wm5 Prophet ROM that is available in this forum and tou will have your device back.. you can then try to upgrade it to WM6 etc
my HTC3400 has been successfully unlocked and upgraded to WM6.1, cause not stable, so I upgraded the original ROM for HTC3400i with SD card,
when upgrating is almost finished, it stopped, shows "Invalid Certificate, Press any key......."
I have tried to recover it with backup ROM, and downloaded orginal WM5 ROM, and WM6.5, all not work.
I think SPL is wrong.
Now it shows like follows,
ONBL 1.19.0000
SPL 1.19.0000
when connect USB, shows USB on the left bottom.
How can I save it? Help!!!!!!
Thanks in advance.
Take it to the service center. No options left. JTAG may help but that would be too risky if you are an average user.
hehe,i would rather try to solve the problem by myself, so anybody can help me work out the problem.thanks.
tell me first which rom u try to flash ?
first i want to know what u do wrong so it better to solve it
ankit360 said:
tell me first which rom u try to flash ?
first i want to know what u do wrong so it better to solve it
Click to expand...
Click to collapse
i wish upgrade WM5.0 official ROM.thanks.
the story is complicated.
1)original is WM5.0
2)unlocked with gene_hspl.exe successfully.
3)upgrated with SD to WM6.1 successfully.
4)i downlaoded HTC3400i official ROM WM6.1, it remember the version is 6.1, i upgraded with SD, the upgrading is almost finished but stop and showed "Invalid Certificate, press any key to......"
5)whatever ROM i want to upgrade with SD or USB cable, all failed, including backup OS.nb+extrom.nb.
if try to upgrade with SD, showed "Invalid Certificate......", if try to upgrade with USB, showed only 2% or 3% then power on
6)when enter tricolor with ONBL 1.19.0000 and SPL 1.19.0000, "USB " shows on left bottom.
ok, what can you do?
sunnyhuang said:
i downlaoded HTC3400i official ROM WM6.1
Click to expand...
Click to collapse
enplane me from where u get this ?
ankit360 said:
enplane me from where u get this ?
Click to expand...
Click to collapse
i download from internet, from a chinese forum.
Heh, trying to solve it yourself ? There is no official WM 6.1 ROM for P3400i from HTC otherwise we wont be moaning here for 4-5 months and given our 40-50 nights for porting WM 6.1 to gene. What you have flashed is something wrong and that has messed up your SPL CID as well as ONBL.
Anyways, Try if you can solve it yourself or get it solved somewhere
Hello
after upgrading i'm stucked in spalsh screen (the one with rom version and others...). can i skip this step? the device is lost?
do you have others questions?
Cheers
no one?
Hi.. did I broke the device?
Cheers
Hi!
Give us more info about your device.
IPL,SPL,installed ROM,etc
Did you try hard reset?
BR
Szig
Here you have the answer like given many times before:
If format fails it is hopeless.
If format goes well and works take the original Aku3 ROM and flash it. The device will work again.
Stuck in splashscreen
High to all
I have a problem with my Charmer - I was flashing it, when I didn't read any instructions and I failed it. Some month ago I came back to Charmer and I repaired it with the "Rescue Kit" and it worked some time. But now even if I flash it with any ROM, my PC write "Congratulation", Charmer turns on but stuck in the splash screen and It's all... when I go to bootloader, it goes and write the IPL and SPL, but when I do Hard reser, it writes "Formad failed", but It can be flash!!! With any ROMs... Please, help me, I like this phone...
punker1993 said:
High to all
I have a problem with my Charmer - I was flashing it, when I didn't read any instructions and I failed it. Some month ago I came back to Charmer and I repaired it with the "Rescue Kit" and it worked some time. But now even if I flash it with any ROM, my PC write "Congratulation", Charmer turns on but stuck in the splash screen and It's all... when I go to bootloader, it goes and write the IPL and SPL, but when I do Hard reser, it writes "Formad failed", but It can be flash!!! With any ROMs... Please, help me, I like this phone...
Click to expand...
Click to collapse
ChrBeck said:
Here you have the answer like given many times before:
If format fails it is hopeless.
If format goes well and works take the original Aku3 ROM and flash it. The device will work again.
Click to expand...
Click to collapse
Hi!
As you can see mostly it is hopeless.Rarely rehotting DOC chip can help and I read somewhere that sometimes flashing helped,but that was a desperated try with Prophet ROM or something like that.If I was you I could try to flash it with Goldcard (just from curiousity and nothing to lose),but if ChrBeck can't help then who?
BR
Scootie
OK first:
Yes that mith with the Prophet flashing is true. But for that we need a working Aku1 ROM to get the IPL down.
Then the Prophet thing works. That is what I found out.
The heating up thing is a mith. It helped only 1 time and is not the best you can do.
And Goldcard is the biggest SH*T I ever heared.
For devices without reachable OEMSPL something like a Goldcard doesn't exist. Goldcard just flashs with SuperCID and without Signature checking. It is like using a HardSPL and won't help.
That is all I know.
Get a good working AKU1 and I'll build you the solution (if my idea is realy right).
ChrBeck said:
OK first:
Yes that mith with the Prophet flashing is true. But for that we need a working Aku1 ROM to get the IPL down.
Then the Prophet thing works. That is what I found out.
The heating up thing is a mith. It helped only 1 time and is not the best you can do.
And Goldcard is the biggest SH*T I ever heared.
For devices without reachable OEMSPL something like a Goldcard doesn't exist. Goldcard just flashs with SuperCID and without Signature checking. It is like using a HardSPL and won't help.
That is all I know.
Get a good working AKU1 and I'll build you the solution (if my idea is realy right).
Click to expand...
Click to collapse
Hi!
Thanks for the answer.
Just a few things:
I'm in searching for an AKU1 ROM.I had it on my computer years ago,but it lost when my HDD damaged.If I find it,I will upload it for you.
The heating up:in this case probably it doesn't help.When we have a device that can't be flashed properly,we try this and it helps more often than you think.Not only with PDAs,but with phones too.
Goldcard SH¤T:
I know what is Goldcard about.
The reason I mentioned it,it helped me 3-4 times when the device (not only Charmer,other devices too) stuck on bootloader or splash screen after flashing.I didn't have too much time in the workshop,so I tried this and worked.
I don't want to argue with you,I know you are an expert in this,I just tried to help with my experiencies.
BR
Scootie
P.S.:I found it on the xda-developers ftp server: RUU_Charmer_1120223_11202110_11220_T-MobileUK_Ship.rar
ftp://xda:[email protected]_1120223_11202110_11220_T-MobileUK_Ship.rar
OK nice that you found the ROM. Maybe we'll have a new test package for the fix of format failed error soon then.
And yes you are right sometimes Goldcard helps if you have forgotten to flash HardSPL or it is damaged then it may help but you need to have acces to OEMSPL and we don't have it.
So hope I can do something soon.
Hi!
I have a question:
I have a Charmer with IPL,SPL 3.08.Unfortunately it is CID locked,so I can flash it with official v3 ROMs only.Is there any solution to downgrade it?Or with JTAG only?
Thanks in advance!
BR
Scootie
The NoID RUU will be able to downgrade it.
Hi!
I tried that,but:
1.flashing is successful,but nothing has changed,I get the old OS after upgrade
2.I tried the v1 ROM I found.The IPL has been changed to 1.12,but the SPL remained 3.08.The OS has been changed in this case,so it worked flawlessly.
The CID unlocking methods didn't work (obvious,SPL was 3.08).
After that I tried to upgrade it,but it was a torture.I got errors and errors,but after an hour finally I could upgrade it successfully.
So,if you have an idea,I have a device to test it.
BR
Scootie
The IPL is down means it worked. After that you can flash a Prophet ROM.
What ROM of Prophet?
High, I was today flashing my Charmer with all original ROM I mean and the flashing process behaves OK, after flashing, it writes "Congratulation" and all the things like OS, Radio, IPL... are change to the definite ROM. But it's all. It will stuck in the splash screen... I have read in this thread something about Prophet ROM. What is it?
The prohpet ROM is an official Prophet AKU 2 flashable after downgrade.
System is as follows:
Fist flash the Charmer AKU1
Then flash a Prophet AKU2
Then flash Charmer Aku3.
You need to do all these steps with the NOID RUU.
That should fix the HardReset failing.
I'm working to get a tool running that does the whole thing automatically.
THX
Oh ****, Thanx 4 quickly answer...And I'm waiting :-D
Ok, so now I'm having
IPL 1.12
SPL 1.12.0000
GSM 01.12.20
OS 1.12.2.23
And I'm waiting 4 your instructions...
How have you gotten the SPL down?
Normally, with flashing... It can be flashed with every ROM...
OK. Cause normally SPL stays up. I never saw a full downgrade.