i'm a newbie
i'm to excite to upgrade my new 818 pro G4 WM 5 which i bought last week..i read few post regarding on how to upgrade into WM 6..then..
1stly i've tried the upgrade package,click the hardSPL,works well after that..but i'm quite lost for step 3 & 4..so i just stop there..
i noted that my SPL change into 2.G4.4PDA
then i read korand post, bout that new rom..i've tried it & it works well,my 818 pro with WM 6..
at the same time, i try to upgrade my IPL into 2.20 but after download it,my avast detect trojan in it..so i just leave it
then i read bout crystal rom..get so excite with the features & function (also the touchflo)
so i upgrade it..
now is the problem..
after i make the hard reset (camera button, comm button & on/off (soft reset button) & reset button below(next to usb/cable slot)..
i STUCK in boot screen which shows
IPL 2.15.0001
SPL 2.G4.4PDA
GSM 02.19.21
OS 6.0.0.255
it just stuck there,no led light..
i've tried upgrade rom back to normal,but no avail as my activesync cannot detect my device.
i've tried the hard reset for few time,yet nothing happen..still the same
searchin for help in wiki,yet still no solution or maybe i'm to panic
plz help me to restore it,or maybe make it alive as normal again..
Finally !!..i've made it
for overnight i searchin & lookin how to restore my device..
(not enough sleep )
this is how i do it instead doing the usually hard reset..
my device is on & the usb cable from my device connect to laptop..
yet still stuck at the boot screen..then
i press the green button (to make phone call) + comm button + soft reset (on/off button) all a the same time (those 3 button only)
then my screen turn into 3 different color..red,green or blue (i dont quite remember already hihihi)
so, i use the 'korand' rom update utility to restore it..with his wm 6 rom
waallaa..my 818 pro is alive again...with wm 6 !!
thanks to korand for his rom, or from whomever the contributer..thank a lots !!
i think i still wanna upgrade into different type of rom..
but my SPL looks different then normal SPL i've see..
SPL 2.G4.4PDA
can anyone could lead me where can i get IPL G4.zip free virus?
well, hope this post could help others who face the same problm as mine..
next time i'll be MORE carefull..
bye..
duato said:
for overnight i searchin & lookin how to restore my device..
(not enough sleep )
this is how i do it instead doing the usually hard reset..
my device is on & the usb cable from my device connect to laptop..
yet still stuck at the boot screen..then
i press the green button (to make phone call) + comm button + soft reset (on/off button) all a the same time (those 3 button only)
then my screen turn into 3 different color..red,green or blue (i dont quite remember already hihihi)
so, i use the 'korand' rom update utility to restore it..with his wm 6 rom
waallaa..my 818 pro is alive again...with wm 6 !!
thanks to korand for his rom, or from whomever the contributer..thank a lots !!
i think i still wanna upgrade into different type of rom..
but my SPL looks different then normal SPL i've see..
SPL 2.G4.4PDA
can anyone could lead me where can i get IPL G4.zip free virus?
well, hope this post could help others who face the same problm as mine..
next time i'll be MORE carefull..
bye..
Click to expand...
Click to collapse
I just have one thing to say you play with your "IPL" when you don't know what you are doing and you brick your phone for real !! and I mean you will brick it as like it wont even turn on !! don't think about playing around with IPL. your SPL is fine. it's HardSPL now. you can upgrade other roms, just read the wm6 guide , follow step by step and you will be fine.
one more time, if you like your device and you want to keep it (and use it) don't play around with it's IPL
true..totally agree with you..
well, i guess i do like this kind of tech..i'm fast learning (usually from mistakes) risk always be my companion ..
one thing i'm curious about..if i want to upgrade to any other roms, should i upgarde my IPL 1st?..just like i try to use your personal crystal rom..why didnt i make it well, even though i follow the instruction step by step?
After i using those Korand's rom..everything is fine except my battery !!
i charging it & i notice that my device is getting hot !!..
i know this is not well..so i need to upgrade into others roms which more suitable with my device..
Thanks hma4 for your concern
___________________
HTC Dopod 818 pro
yup..better dont disturb the IPL
on second thought,it wisely not to disturb the IPL as you've mention except for those a genius
bout the battery,after few reset.. it back to normal..no hot anymore
i think i better stick with this rom for awhile.. as it is nice,stable & fast..+ more xtra storage..
In general, just leave IPL and SPL alone. Most ROMs (except WM5) work regardless of IPL/SPL and it's better to avoid bricking/damage.
Related
--------------------------------------------------------------------------------
mine is a G4 device IPL 2.09 SPL 2.09.0000
i flashed several times my prophet with diferent wm6 roms but i allways downgrade to wm5, cause some issues i didn't like,
this morning i tried to upgrade to wm6 again, made the procedure
1 Hard reset
2 connect to pc and wait to activesync to come up
3 run upgrade utility and wm5 flash started
after a while the upgrading process stucked at 5% and gave an error, i don't remeber whitch it was,
but since then my prophet always turns on in bootloader mode, you can do nothing, even turn it off, the only way to turn it off is removing the battery,
when you put the battery again and press power on it starts in bootloader mode
the diference that i notice it's that now the bootloader shows
IPL 2.09 and SPL 2.09 not anymore SPL 2.09.0000
so i tried again to flash the prophet but it always give me this errors
300 when i used the wm5 spanish rom
and 274 conection problem when i use the temp pdaviet rom or the fantastic mobiz rom
when i plug the prophet to the pc the bootloader displayes USB but activesync never starts
what could be my problem i used the correct G4 roms
please somebody help me
joesa said:
--------------------------------------------------------------------------------
mine is a G4 device IPL 2.09 SPL 2.09.0000
i flashed several times my prophet with diferent wm6 roms but i allways downgrade to wm5, cause some issues i didn't like,
this morning i tried to upgrade to wm6 again, made the procedure
1 Hard reset
2 connect to pc and wait to activesync to come up
3 run upgrade utility and wm5 flash started
after a while the upgrading process stucked at 5% and gave an error, i don't remeber whitch it was,
but since then my prophet always turns on in bootloader mode, you can do nothing, even turn it off, the only way to turn it off is removing the battery,
when you put the battery again and press power on it starts in bootloader mode
the diference that i notice it's that now the bootloader shows
IPL 2.09 and SPL 2.09 not anymore SPL 2.09.0000
so i tried again to flash the prophet but it always give me this errors
300 when i used the wm5 spanish rom
and 274 conection problem when i use the temp pdaviet rom or the fantastic mobiz rom
when i plug the prophet to the pc the bootloader displayes USB but activesync never starts
what could be my problem i used the correct G4 roms
please somebody help me
Click to expand...
Click to collapse
Don't know for sure that it will help, but when you want to connect to your PC in USB mode (bootloader) you should first disable "Allow USB CONNECTION" in the conections settingpanel of Active Sync.
thanks i'll give it a try
joesa said:
--------------------------------------------------------------------------------
mine is a G4 device IPL 2.09 SPL 2.09.0000
i flashed several times my prophet with diferent wm6 roms but i allways downgrade to wm5, cause some issues i didn't like,
this morning i tried to upgrade to wm6 again, made the procedure
1 Hard reset
2 connect to pc and wait to activesync to come up
3 run upgrade utility and wm5 flash started
after a while the upgrading process stucked at 5% and gave an error, i don't remeber whitch it was,
but since then my prophet always turns on in bootloader mode, you can do nothing, even turn it off, the only way to turn it off is removing the battery,
when you put the battery again and press power on it starts in bootloader mode
the diference that i notice it's that now the bootloader shows
IPL 2.09 and SPL 2.09 not anymore SPL 2.09.0000
so i tried again to flash the prophet but it always give me this errors
300 when i used the wm5 spanish rom
and 274 conection problem when i use the temp pdaviet rom or the fantastic mobiz rom
when i plug the prophet to the pc the bootloader displayes USB but activesync never starts
what could be my problem i used the correct G4 roms
please somebody help me
Click to expand...
Click to collapse
Try to search the new ROM update utility and try to reflash using it.
pda is dead
hey friends..!!
i have a problem with my neo..
got new update of wm 6. 4..0.0.0.1 version..
phone gets switched off by itself.. sometimes..
when sms comes or i recieve a call..
i fear it has become a black brick..
plz help me out..!!
and..
one more thing..
is there any was to restore my contact.. i had a backup in wm 5..
the back up file when restored in w m 6..
contacts don t open.. then again i hjave to hard reset it..
lost my contacts and documents.. but i stii have that back up file..
plz help me out..
replies awaited..!!
dj00912 said:
hey friends..!!
i have a problem with my neo..
got new update of wm 6. 4..0.0.0.1 version..
phone gets switched off by itself.. sometimes..
when sms comes or i recieve a call..
i fear it has become a black brick..
plz help me out..!!
and..
one more thing..
is there any was to restore my contact.. i had a backup in wm 5..
the back up file when restored in w m 6..
contacts don t open.. then again i hjave to hard reset it..
lost my contacts and documents.. but i stii have that back up file..
plz help me out..
replies awaited..!!
Click to expand...
Click to collapse
For the WM6, try Gullum V6 Touch...
Now for the contacts problem - flash WM5 back, restore your contacts and back up them with PIM backup 2.5 (use search you will find it in the forum somewhere).After reflashing the WM6 you will be able to restore them again. The other option is to use Outlook to synchronize.
chavdar said:
For the WM6, try Gullum V6 Touch...
Now for the contacts problem - flash WM5 back, restore your contacts and back up them with PIM backup 2.5 (use search you will find it in the forum somewhere).After reflashing the WM6 you will be able to restore them again. The other option is to use Outlook to synchronize.
Click to expand...
Click to collapse
It's beter NOT to use any backup software when you migrate from WM5 to WM6 or the other way around. Sync first with your desktop ans sync back after upgrading. The standard location are not the same, so it is messy when you replace the files to their original positions.
Hi,
In Every ROM with WM6 and WM6.1 I got this trouble.
My QTEK S200 works fine with MW5 , when I install a WM6 ROM the sound dissapear.
First my QTEK S200 (HTC Prophet)
IPL: 2.20.0001
SPL: 2.20.0001
Radio: 2.47.21
OS: 2.20.7.35 WWE Korand 3.1 WM6.1
Protocol: 4.1.13.24
2 GB SD
Software Installed:
Coreplayer 1.1.0
SPB Weather 1.0
Oxios Memory 1.40
Battery Status 1.04.203 beta4
Windows Live for Mobile 10.6.0033.0600
How this happen...
1.- The Sound dont work, The Speaker.
2.- I can recibe call and call. But incomming call theres no sound only Vibration.
3.- When this happend I try to Open CorePlayer or any software for media and give a error " Wave Output: Devide Error !"
4.- Reset , the sound come back but...
5.- After this the ENDCALL Button works bad, after pressing this sound like a chime.
I got to rollback to WM5 and the trouble never come again.
I try a lot of things Reset, Flash , Reflash , Another ROM , bla bla...
And I confirm this only happen with WM6 and now WM6.1
I Think this is a software trouble , no hardware because when I turn the Volume down the weird Chime Sound go down too.
Please Gullum , HMA4 , Korand, Cloudyfa ... help me ... I dont know what to do ...
Seems only you have this problem, try to read step by step guide to upgrade again then flash to Korand 2.6 WWE, if the problem still happen, it must be your hardware problem.
IN your signature :
IPL: 2.20.0001
SPL: 2.20.0001
Radio: 2.47.21
OS: 2.20.7.35 WWE Korand 3.1 WM6.1
Protocol: 4.1.13.24
How can Korand 3.1 using SPL 2.20.0001 ??? when using korand 3.1 the SPL should be 2.g3.4pda.
To me it seems to be a software conflict. Try to keep your ROM clean after a reflash for some time. If you have this problem without any additional software installed, then the problem is with your Prophet (as you being the only one reporting) but I can't imaging because things work fine with WM5.
So give it a try and don't install anything exept your ROM.
@tb:
He probably used JumpSPL to flash, that utill don't change the SPL but bypasses it only once.
Looks like a radio Problem. change your radio, I think it will help just give it a shot ..
thanks guys
thanks for your comments ... since yesterdar I do a HardReset and work with the rom clean ...
Everything goes ok ... But lets see...
If the problem appears again I will notice you..
Thanks again..
PS HMA4 when you gonna bring to life a new Crystal ?
gzprophet said:
thanks for your comments ... since yesterdar I do a HardReset and work with the rom clean ...
Everything goes ok ... But lets see...
If the problem appears again I will notice you..
Thanks again..
PS HMA4 when you gonna bring to life a new Crystal ?
Click to expand...
Click to collapse
Hi, I can the same problem. I have korand 6.1 WW3. This problem is the same with Shadow (all version), Korand, etc. Do you find the problem? Im sorry for my poor english.
I have the same problem. It's not a big deal - happend only once or twice and after softreset the problem is no more. Using Konrad's 2.5.
Another problem that's more of a pain in the ass is that my prophet hangs once in a while. At times, when I press the power button to get it to standby mode it just won't turn back on - I have to soft reset it.
Problems such as not always working are something you must accept is going to happen when you put software on a device that it is not designed for. People like gullum and Cloudyfa try to remove as many problems as possible, but they will happen. Nothing can be done to prevent all problems, but the experts can sort most of them.
l3v5y said:
Problems such as not always working are something you must accept is going to happen when you put software on a device that it is not designed for. People like gullum and Cloudyfa try to remove as many problems as possible, but they will happen. Nothing can be done to prevent all problems, but the experts can sort most of them.
Click to expand...
Click to collapse
Yup, and we are pretty much aware of it But the guy was just pointing out the problem, so saying what you have said is quite pointless. Let's just try to work out the problems we can work out and try to "live" with the rest.
My comment was more about this:
Another problem that's more of a pain in the ass is that my prophet hangs once in a while.
Click to expand...
Click to collapse
me and my brother changed to WM6 and we both get the same problem that the sound goes off after some while and then i have to soft reset and then the sound comes back ,, this is a serious problem please try to find a solution
thank you
What ROM did you upgrade to?
Again ...
Hi , me again ...
I do a hard reset , work some days with a clean rom and the problem appears again ...
Clean ROM = No Sync, No Soft , No Apps , no Nothing !!!
A lots of tests ... So I Confirm that this problem is the ROM maybe the OS , some driver etc. WM 6 or WM 6.1.
I try to work some days without a SIM and the problem never come ... Maybe this can use as a clue for a solution.
I dont know what more I can do...
If HMA4 , Korand, Gullum or Cloudyfa need me as a tester for a solution to this problem I do it ..
Hi guys, I am experiecing the same problem.
Mine is a Dopod 818pro with SPL 2.20 and Radio ROM 2.69
Please advise your ROM versions to see if any clues.
Please Help !
Gullum, Cloudyfa, Korand, Hma4 and others developers ... please help us
I know of this problem with some builds and the workaround is to goto phone > menu > options and set kaypad of so no sound comes when pressing the numbers of the dial pad. some builds have the problem of disaparing sound after pressing in about 30 - 40 numbers on the phonepad.
Thanks Gollum
Thanks Friend...
So , you tell me if I turn Off the keypad tones the problem dont come back ?
But what about the Chime Sound when the Endcall button is preset ?
In my phone i Got the weird sound of the endcall button after the problem of the sound goes away ... a Soft Reset and the weird sound come ..
If you want in some solution for this I wanna help you as a tester..
Thanks again gollum
It sounds I was caught by the same problem, at least by looking. I got no sound from my phone speaker now. This happened after I try to play music through the Nokia BH801 BT headset. I installed a bunch of program but none works, and i lost sound after I installed BT 3900. Don't know if that's the reason, but I couldn't access bluetooth manager through BT 3900 indicating " insufficient memory". Plus, I got two BT icons in "connection" page now
I would like to remove BT 3900, but wasn't able to locate the file. I read the Enable_MS_BT.cab could do the job, but just can't find the file.
Please give me some clues to solve this frustrating problem. Thx a lot
...
I think that your problem is other ...
But why you dont try a Hard Reset, if the problem is Logical or Soft Driver , a Hard Reset maybe can be the solution ...
Try this ... and see if your Speaker come to life again.
so what is the solution ,,, now more than 10 people have the same problem but no solution????????????????? (((((
just to be straight to the point. I have a Wizard O2 mini S and have upgraded to hard SPL successfully and managed to use WM6 for a while. few days ago, My brother accidentally run an orriginal wizard rom upgrade pack (contained IPL/SPL) and now my device doesn't work and my PC couldnot detect this wizard device in any mode (normal boot mode or USB - bootloader mode). However it still can enter the 2 bellow modes...
2. At normal boot: just only display and stuck at bellow message/info
_ IPL 2.21.0001
_ SPL 2.21.olip
_ GSM 02.19.11
_ OS 6.1.0.0
1. Bootloader: tri-color trip and indicating in USB status with following info but also could not detect by PC too.
_ IPL 2.21.0001
_ SPL 2.21.olip
I have read some info in the forum saying that you will bricked it if you run a rom upgrade contain SPL/IPL on an Olip (hard SPL) device. So i think this is my case but i don't know if there is any expert or user have found a solution to work over this case at this state... or any useful suggestion from you all might help me!! I definitely don't want an expensive paperweight...
Any suggestion of you all will be very much gratefull.
lavituyen said:
just to be straight to the point. I have a Wizard O2 mini S and have upgraded to hard SPL successfully and managed to use WM6 for a while. few days ago, My brother accidentally run an orriginal wizard rom upgrade pack (contained IPL/SPL) and now my device doesn't work and my PC couldnot detect this wizard device in any mode (normal boot mode or USB - bootloader mode). However it still can enter the 2 bellow modes...
2. At normal boot: just only display and stuck at bellow message/info
_ IPL 2.21.0001
_ SPL 2.21.olip
_ GSM 02.19.11
_ OS 6.1.0.0
1. Bootloader: tri-color trip and indicating in USB status with following info but also could not detect by PC too.
_ IPL 2.21.0001
_ SPL 2.21.olip
I have read some info in the forum saying that you will bricked it if you run a rom upgrade contain SPL/IPL on an Olip (hard SPL) device. So i think this is my case but i don't know if there is any expert or user have found a solution to work over this case at this state... or any useful suggestion from you all might help me!! I definitely don't want an expensive paperweight...
Any suggestion of you all will be very much gratefull.
Click to expand...
Click to collapse
If it gets into Bootloaders(Tricolor) and detects usb,it means its connecting with the pc.Try to flash any wm6 rom and see if it boots up normal,coz a Bricked phone won't either Power On,charge or get into Bootloaders,you might be in luck there.
hi zabardast, thank you very much for your prompt reply... i will try to do as u say... As you said... the phone is still able to charge itself when i conect it to the USB... Hope it will work when i flash with a new rom...
Will keep u all updated with the process. Thanks again
Try the Love Rom if WM6 roms fail. The RUU is compatible with a G4
XL3N7 said:
Try the Love Rom if WM6 roms fail. The RUU is compatible with a G4
Click to expand...
Click to collapse
similar problem faced,i install ampv1 rom on my kjam & wrking well but i tried to ensure that battery is "some how" 100% as my phone wont boot....but now working well.
1stly it failed (and i lose my hope)
but
i was trying to buy nokia n95 but can get it so tried once again....
hey it works (i think that it worked becoz i took out batter for 2days and possibily date went back to 2006)
so u can try this.
As long as you can see the 3 color ( bootoader) there is still hope
you can fix it just have to have a little courage... anyway there is nothing to loose anymore its either claim it as it is ... brick( I am telling you it is not bricked... you can still see the 3 colors right?) or go on the flashing part... more excitement
flash wizard love first and choose any rom here I think every rom has its own advantages and disadvantages... with that said ... happy ROM hunting
Good news...Prolem Fix
Good news, I've managed to get my wizard fixed... and now I would like to share with you all how i do it...
1. get a rom without IPL/SPL/Extended rom . In my case i got a slim version of WM6.1 (Slim-v3.0a) from pdaviet http://pdaviet.com/showthread.php?t=24923.
2. You also need to pay attention at the RUUResource.dll file which newromupdateutility_wizard_noid.exe pack will need to run your upgrade (I get it by extracting from the original ship rom pack for your device). If you receive an error message when u run the wizard_noid saying that it can not detect the RUU dll then just rename the RUUResource.dll to whatever it say.
3. get your phone to boat loader-USB mode and upgrade it with newromupdateutility_wizard_noid.exe (but remember some other version might not work, in my case i tried with several as i have quite number versions of them). If you like u can get the one i used.
Note: If you fail in running the wizard (because the usb connection is lost even if you see the USB status on it), remove the battery of your device, place it back then get to bootloader-USB connection mode and run the process again.
4. when the process finish, make a hard reset.
special thanks to the owners of the lovely tools and the rom I used.
i saw lot of people have dead prophet problem, so i am here now to make a new thread to all this people and i hope to make it useful.
now we start
** FIRST : lets know names of prophet :
I mate Jamin, O2 XDA Neo, Qtek S200, Dopod 818 pro, Dopod 830, SPV M600, VPA Compact S.
** SECOND : we must know that before we trying to do any updating or change roms on my prophet i just need to do which called unlock for the prophet and then we after that been able to change any rom on my ( jamin ) and of course u need to be careful about Your device is it G4 or G3 ,
# and how we know its G4 Or G3 ?
# when u start Your Device u will see some numbers on left,
---------------------
IPL: 1.00.000
SPL: 2.20.000
GSM: 02.61.21
OS: 3.0.0.0
--------------------
and may be changed and that goes to the rom which You have, now we look for the last number on ( IPL and SPL ) , if we found it ( 0 ) it means You r G3 and if it ( 1 ) so You r G4 .
** THIRD : lets go to unlock , i will put programs in this thread it will help u in unlock.
-- Sync your device with computer and open the file u download it called HardSpl you will find two files one one foe G3 and G4 open your kind then you'll find a file called (( hardspl.bat )) okay, be sure your device is connected to computer then open the file and follow instruction and it will reset your device ,
now u ready to change rom.
TO BE CONTINUED
hey guys
i tried to attachment the file now put it gives me database problem, so i will be after it to attach don't worry pals. see you later.
hey guys
i tried to attachment the file now put it gives me database problem, so i will be after it to attach don't worry pals. see you later.
if any one can help please contact me.
hello
my device is jamin g4
it stopsat the boot loader and dono thing
can u help me please?
my e-mail is [email protected]
and suddenly after trying to update the spl been 1.01
please help me
can i fix it?
waiting for ur help
What is the IPL and SPL?
If the wiki where up, I'd suggest looking at that, but as it is I'll explain it now...
What ROM where you attempting to upgrade to?
To get the device back, I would say "Read the wiki" but it's down!!!
Download this ROM.
In ActiveSync, disable "connect through USB" (File->Connection Settings).
Put the device into bootloader (the three coloured screen) and connect it to the computer using the USB cable.
Run the file you downloaded earlier. This should then install a new ROM.
From there, just wait for it to finish.
Now, it should work!
From there, you could re install the Orange WM5 ROM, or try upgrading to WM6. Make sure you read all the relevant guides first!
thanks alot i did as u said but it stops at 80% or 88%
then show this message (error 326 invalid command )
please help me
i'm feeling bad
my mail is [email protected]
What brand the device? Has it been SIM unlocked?
hi again brothers, pal zerocool. first u must unlock ur device to be able to accept any rom after that and solve pproblems.
first flash this rom its offecial and it solve dead prophet problems.
then make hard spl by program open file called hardspl.bat.
make hard reset.
flash ur rom u want.
make hard reset again.
then enjoy.
i uploaded the hardspl program but i couldnt upload the rom its so big so u can look in ur mail u will find the solution.
u can extract file by any program for zip.and tell me the news
dont forget to look to ur mail. see all of u later
Dead prophet
Hi guys,
I have been using a sh... Nokia sine I broke my prophet G4 in december by upgrading the OS.
I had downgraded first to NVID and then I tried to upgrade and it fails at 95%.
Sine this day, my prophet seem totally dead, no light when plug on both charger or computer, windows do not recognize at all the device because it is turned off. And it really do not seem to charge...
I am living in China now and a guy told me I had to change the PB board...The ost is 100Euros, but I am almost sure I an find another solution...
The weird thing is I cannot charge it at all ( I mean no lights but does it charge a little?).
The guy tested my prophet with another battery and in that ase, it is stuck on the bootloader.
We tried several roms and it always fails at 95% and the error is 200 something, maybe 245 or 243, I do not remember sorry...
Is my phone hardware is dead? or it is just a software problem and I did not see the right guy?
Do I need to buy a new battery? I have read that sometimes the device is not able to recognize it even if it the offiial one and even if it is working on another device...
PLease help me I don't want to loose this phone that I've been using for almost 3 years...
Otherwise I will switch to an iphone but I am not sure to be as happy than I was with my prophet.
Xie Xie for your advice and answers.
Guilh1
Can it enter bootloader at all?
If yes, what are the IPL and SPL?
If not, it will be a hardware problem (may just be connectors to the battery but may be something more).
the only way of recovery is using jtag
but 1st we must discover the location of jtag pins on motherboard
I just do not know because with my actual battery, anything is possible....
when I tried with the guy and a new battery it was blocked on the bootloader, but don't remember the IPL and SPL...sorry
I may be right about the battery onnectors though, but the problems seem to be from the phone connectors or the battery it self???
Thank you anyway for your very quick reply
when I tried with the guy and a new battery it was blocked on the bootloader, but don't remember the IPL and SPL...sorry
Click to expand...
Click to collapse
If it can enter bootloader, it is almost certainly your battery at fault!
Ok so i burnt my battery during the upgrade...
But why is it still blocking at 95% when he tried to put a rom?
With his battery, it was stuck on the bootloader and not possible to install a rom, even a NVID WM5...
I really do not know what to do...
Thanks again for your help
My iMate JAMin is dead; I was in the middle of flashing it when it froze, now when I turn it on, I get the Tri-color screen with the following ...
IPL: 2.13.0001
SPL: 2.13.0001
No [BUSB[/B] is detected. So now I need a way to flash it from the SD Card. I can not even see the HTC startup screen anymore, it just jumps directly into the tri-color screen.
Ok so i burnt my battery during the upgrade...
But why is it still blocking at 95% when he tried to put a rom?
With his battery, it was stuck on the bootloader and not possible to install a rom, even a NVID WM5...
I really do not know what to do...
Thanks again for your help
Click to expand...
Click to collapse
Do you know which ROM? Is your device branded, and is it SIM locked?
Do you know the IPL/SPL? Did they end with the same numbers?
My iMate JAMin is dead; I was in the middle of flashing it when it froze, now when I turn it on, I get the Tri-color screen with the following ...
IPL: 2.13.0001
SPL: 2.13.0001
No [BUSB[/b] is detected. So now I need a way to flash it from the SD Card. I can not even see the HTC startup screen anymore, it just jumps directly into the tri-color screen.
Click to expand...
Click to collapse
Please look at this if you want more help, post here...
thanks alot dear samuraititio
but i can't flash it
it writes (no vender id)
help me please i tried another tool with the same nbf file it stops at 80%
and it automatically enter the boot loader
and i can't do ant thing
its information
jamin/g4
ipl 2.13.0001
spl 1.01
i think my problem is in the spl coz it was 2.13.0001
and now it's 1.01
how can i fix it please i still starter in this way so i'm trying;
help soon please
You now have a G3 SPL on a G4 Device.
What did you flash exactly?
l3v5y said:
Do you know which ROM? Is your device branded, and is it SIM locked?
Do you know the IPL/SPL? Did they end with the same numbers?
Please look at this if you want more help, post here...
Click to expand...
Click to collapse
hello pal i3v5y
i have the same problem
idid what u said the flashing stops at 80%
i need ur help please
i'm online at the moment and u too help me soon if u can please
my e-mail is [email protected]
waiting for u i don't have any other device to use and i need it
l3v5y said:
You now have a G3 SPL on a G4 Device.
What did you flash exactly?
Click to expand...
Click to collapse
now i flashed the official rom of jamin but it stopped at 80%
Hi everyone.
I tried to upgrade my i-mate Jamin to WM 6.5 using this file.
I think I did everything right (I checked the G4 and HardSPL in the beginning of installation and I'm sure my MB is G4).
Everything was going perfect and the installation advanced without any problems, but at the end my Jamin was stuck in the three color screen, showing only the following words:
IPL: 2.13.001
SPL: 2.13.001
I tried to hold the Comm Manager and Soft Reset buttons as this topic recommends, but the phone gets back to the 3 color screen again, and no success...
I tried to pull out and reinsert the battery, also no success...
Please help me, this is my friend's phone! I AM SO NERVOUS and I may kill somebody!
Is there anything I can do to get rid of the 3 color screen?
mahi58 said:
Hi everyone.
I tried to upgrade my i-mate Jamin to WM 6.5 using this file.
I think I did everything right (I checked the G4 and HardSPL in the beginning of installation and I'm sure my MB is G4).
Everything was going perfect and the installation advanced without any problems, but at the end my Jamin was stuck in the three color screen, showing only the following words:
IPL: 2.13.001
SPL: 2.13.001
I tried to hold the Comm Manager and Soft Reset buttons as this topic recommends, but the phone gets back to the 3 color screen again, and no success...
I tried to pull out and reinsert the battery, also no success...
Please help me, this is my friend's phone! I AM SO NERVOUS and I may kill somebody!
Is there anything I can do to get rid of the 3 color screen?
Click to expand...
Click to collapse
Please don't panic! If you see when connect the phone to the computer and USB message on the bottom of prophet screen update is posible. So try to put original WM5 on the phone. Read dioxda2 post for more. For sure you don't hardspl your phone before flashing....
Thanks
bikertibi said:
Please don't panic! If you see when connect the phone to the computer and USB message on the bottom of prophet screen update is posible. So try to put original WM5 on the phone. Read dioxda2 post for more. For sure you don't hardspl your phone before flashing....
Click to expand...
Click to collapse
Thank you very much, my problem solved using the WM5 flashing process.
I thought it's impossible to get the phone connected to PC because activesync wasn't establishing a connection to the phone, but obviously I was wrong.
After flashing WM5, I performed a HSPL on the phone, and then used the file again, and the phone was upgraded to WM 6.5 with no problem.
I previously had downloaded your 6.5 ROM from a crappy forum, which was only including a download link and some useless info, and since I was a newbie myself D), I didn't even know that I should have performed a HSPL before upgrading the OS.