Related
Ok, I've been trying to update my 8525 for hours...here is my problem. First, I tried to HardSPL-v7 but I kept getting an "Error [240] File open". I think this is preventing me from doing any ROM update. When I try to run the Cingular ROM update activesync shuts down and I get a connection error, I think it is "error [260]". I have wiped or cleaned out my 8525 so that I am back to day one. I have tried both ROM updates on 2 separate computers and I get same error messages on both computers. I have searched the Wiki's but have found nothing, so please help. As you can tell, I am a virgin to ROM updates so please go gently.
I should add, my present ver. ROM AKU 2.3 (1.34.502.7018.01H) SPL 1.06 IPL 1.01. Radio is 1.16.
have you taken a look at my Safe WM5 Upgrade Guide??
If you follow this guide EXACTLY, you should be fine.
mrvanx said:
have you taken a look at my Safe WM5 Upgrade Guide??
If you follow this guide EXACTLY, you should be fine.
Click to expand...
Click to collapse
I have, I have even tried the mtty "fix" but I had problems with that as well. I get a modem connection screen but there is nothing about a USB connection.
Bit more info would be nice, which ROM are downloading, and where from??
Also what procedure are you doing to update?? EXACT info please.
mrvanx said:
have you taken a look at my Safe WM5 Upgrade Guide??
If you follow this guide EXACTLY, you should be fine.
Click to expand...
Click to collapse
Ok, I just tried it 2 more times, Hard-SPL. It flashes to the 8525 and goes into bootloader and shows the following "HERM100 IPL-SSPL by Des HERM100 SPL-1.09.ds" at this point activesync 4.5 shuts down the 8525 is stuck in bootloader (it never reboots) and after a few minutes I get "Error [260] Upated Error". Hard SPL shuts down and the 8525 is stuck in bootloader mode. At this point I have been disconnecting the USB cable and doing a soft reset, once the phone is on, I go into bootloader and the old info shows up SPL 1.06 and IPL 1.01.
Let me have a think, firstly do you have the latest versions of the .net framework installed?
I was able to finally run HardSPLv7, I had to do it on another computer. Now, I would like to update to RUU_Hermes_CINGULAR_WWE_2.15.502.3_6275_1.40.30.00_108_Ship.exe. I assume I should use the same computer that I used to successfully run HardSPL. Do I need to rebuild the rom file with RUUWrapper.exe (CustomRUU by olipro) & Dutty's Good NBH Tool, before running the RUU_Hermes_CINGULAR_WWE_2.15.502.3_6275_1.40.30.00_108_Ship.exe update?
mrvanx said:
Let me have a think, firstly do you have the latest versions of the .net framework installed?
Click to expand...
Click to collapse
I have .Net 1 thru 3.5 (pre-release) installed on the computer that I can not get to run any ROM updates.
9
compudds said:
I was able to finally run HardSPLv7, I had to do it on another computer. Now, I would like to update to RUU_Hermes_CINGULAR_WWE_2.15.502.3_6275_1.40.30.00_108_Ship.exe. I assume I should use the same computer that I used to successfully run HardSPL. Do I need to rebuild the rom file with RUUWrapper.exe (CustomRUU by olipro) & Dutty's Good NBH Tool, before running the RUU_Hermes_CINGULAR_WWE_2.15.502.3_6275_1.40.30.00_108_Ship.exe update?
Click to expand...
Click to collapse
Yes if you carry on the guide past flashing hardspl you will get the radio updated aswell.
Can i ask, what is different on the computer you used???
mrvanx said:
Yes if you carry on the guide past flashing hardspl you will get the radio updated aswell.
Can i ask, what is different on the computer you used???
Click to expand...
Click to collapse
Off hand, the major difference would be Intel (worked) vs. AMD (failed) but I doubt that is the problem, you would be flooded with questions due to so many computers that have AMD chips. The USB cable was the same as well. I'll have to think about that...
Definatly check your "failed" computer is up to date with .net and everything else, most likely a software problem.
I have this problem as well..
AT&T 8525 windows moble 6 trying to install the hardspl v7.
v3.5 and 3.0 .net framework.
the RUUwrapper program gets to the 'verifiying info' screen then give me an erroe 240 message. 'the update utility can not open the requested file.'
any help would be great. Looking to add the touch it interface.
thanks,
Mike
Read the post Hard SPL at the top of this forum and go to page 116 ( I believe its post #1160) and use the sd card method. You don't need to use the pc at all. I generally flasah ALL os's using the sd card method as it seems to be safer then using the usb method. No "sync errors" to deal with.
Cheers...
I have the exact same problem..
When it goes to tri-color screen, the USB connection goes off and windows will pop up the search for driver dialogue box.. then afterward another dialogue box will appear saying Error [260].
I tried restarting my pc and device (even removing the battery) but still failure
Any help would be highly appreciated. Thanks.
blackphnx said:
I have the exact same problem..
When it goes to tri-color screen, the USB connection goes off and windows will pop up the search for driver dialogue box.. then afterward another dialogue box will appear saying Error [260].
I tried restarting my pc and device (even removing the battery) but still failure
Any help would be highly appreciated. Thanks.
Click to expand...
Click to collapse
I loaded it thru the sd card just as the post above suggested. It loaded the hardspl just fine. My PPC seems to run faster as well.
Thanks for the help! it is much appreciated.
blackphnx said:
I have the exact same problem..
When it goes to tri-color screen, the USB connection goes off and windows will pop up the search for driver dialogue box.. then afterward another dialogue box will appear saying Error [260].
I tried restarting my pc and device (even removing the battery) but still failure
Any help would be highly appreciated. Thanks.
Click to expand...
Click to collapse
One thing that i have learned from flashing my 8525 is to remove any USB device except the 8525. This has worked for me.
swimmy said:
One thing that i have learned from flashing my 8525 is to remove any USB device except the 8525. This has worked for me.
Click to expand...
Click to collapse
But my mouse is on USB. I might try on different computer and post back the results.
UPDATE
I tried using my friend's laptop and it installed without a problem. I think the issue is with the .NET framework. I installed the latest one before flashing and it worked fine. Hmmm.. Im not sure about this tho.
Hello.... Try the sd card method. You don't need the computer...
Sorry if I sound condescending, but, I seem to find a lot of people saying that they have sync problems. Solution, Take the pc out of the equation (except to load files onto sd card). It is SOOO much safer then using the pc, no "sync" problems, no chance of usb being disconnected, reset button being hit or , worst case scenario, power failure...
You have to either have little or no battery power or MANUALLY hit the reset button with the stylus to stop the flash...
And thats my 2 cents....
Refer to post #13 to find out how to use sd card method to flash hard spl...
Cheers...
sd card method???
how?
Hi all.
I tried to update to WM6 on my Dopod 818 Pro with ProphetTouchIXbeta2. It displayed and error and after hard resetting I can only get the splash screen. So I roamed the forum the whole day downloaded a couple of other WM6 packages (I could not get the WM5 files from the WM6 upgrade guide, link is dead). So I downloaded the ROM updates from the HTC websites for the 818 Pro. I can start the 818 Pro into Bootloader, but whatever ROM file I use will tell me Update Error 260 Cannot connect!!
The Bootloader tells me the following: IPL 2.15.0001 / SPL 2.15.0001 and USB connected. Active Sync will not connect.
Sorry, I am a newbie and should have waited for the official upgrade. But I had to try
Thank you in advance for any help!
Cheers,
Markus
Hi,
i had the same trouble some time ago. The false was, that I connect my NEO on an USB Hub, take a direct connection between your PC and your XDA. Also, if it's possible, try another PC. HTH
Put your Prophet in bootloadermode: press Camm button and soft reset at the same time.
In ActiveSync on your PC: DISable connectionsetting "Allow USB connection"
Conect your Prophet to a USBport directly with a cable.
Run a NVID-RUU, perhaps the official VID-RUU doesn't recognize your device anymore.
This should do it.
i can confirm this process
Thanks guys, but the main issue is:
1. I can get into Bootloader
2. BUT ActiveSync does not make a connection with my DEvice in Bootloader and the ROMs I tried cannot connect to my device then.
I tried it on 2 machines (Vista and XP)
Cheers,
Markus
starkus said:
Thanks guys, but the main issue is:
1. I can get into Bootloader
2. BUT ActiveSync does not make a connection with my DEvice in Bootloader and the ROMs I tried cannot connect to my device then.
I tried it on 2 machines (Vista and XP)
Cheers,
Markus
Click to expand...
Click to collapse
Activesync is not supose to conect to phone in bootloder
just run the wm5
Thanks,
but if I run the WM5 by HTC its only goes to the Verify information screen and after that. it says Error [260]: Connection. The Update utility cannot connect to your PDA Phone.
And in the beginning of the process it displays a couple of steps, like check that your battery is at least 50% charged and other ssteps, of which one is, that I have to make sure that ActiveSyc is connected.
Cheers,
Markus
Solved
Ok, the issue was that only this file from HTC would do the update: RUU_Prophet_2151327_21513121_021921_DOP_ASIA_WWE_Ship.exe
Alle the others I downloaded would not work, also not the files I got from here. One was by the way full of Viruses !
Thanks for your help guys! Will try to get to WM6 again now
starkus said:
Ok, the issue was that only this file from HTC would do the update: RUU_Prophet_2151327_21513121_021921_DOP_ASIA_WWE_Ship.exe
Alle the others I downloaded would not work, also not the files I got from here. One was by the way full of Viruses !
Thanks for your help guys! Will try to get to WM6 again now
Click to expand...
Click to collapse
which one was "full of viruses" and how you checked it ?
Sorry should have mentioned it before:
It was Prophet"s_2.20.7.34_2.20.7114_02.69.21
Virus or unwanted program 'W32/Sality.L [W32/Sality.L]'
All .exes were infected in that package.
Cheers,
Markus
Hi, Excuse me if this has been answered already but I couldn't find it if it has!
I'm trying to upgrade my M3100 to WM6 - Schaps 4.31. I've unlocked the phone and installed Hard SPL v7. When it goes through the Schaps upgrade, I get to the final 'next' button, press it and then the progress bar appears. The M3100 screen goes blank, activesync closes and then the upgrade hangs. Then a Error 260 conection message comes up and, after a few minutes, the M3100 bursts into life.
I've tried resetting the PC and the M3100 with no sucess. I am using Activesync 4.5 & Windows XP SP2
Any help is appreciated. Thanks.
Phil
Try disabling all firewalls, it may be worth trying to flash using the SDCard method. This is a very common issue I'm sure if you search the forum for 260 you will find loads of entries.
Also have a read of this which should help you.
http://forum.xda-developers.com/showthread.php?t=299462
The official Orange M3100 ROM (and probably most official ROMs) comes with a doc which explains all of the error numbers and what to do.
My suggestion would be to do the following as you'll be told to try this before looking further into it:
instead of connecting to ActiveSync and running the update .exe file, do this:
Disconnect device from desktop PC altogether;
Open ActiveSync;
Go into File > Connection Settings and UNcheck the 'allow USB' option - odd as that may seem;
Put your Hermes into bootloader mode (press and hold left-side 'ok' button and right-side 'power' button whilst soft-resetting with stylus), seeing tri-colour screen and the word 'Serial';
When in tri-colour screen, with 'Serial' displayed, THEN connect device to desktop PC via USB cable, even though you've disabled USB connections;
'Serial' will change to 'USB' on the tri-colour screen;
Run the update from Schap's or whoever.
Hopefully that will have worked. Good luck, mon ami.
Chunkymonkey, Progress I think....
Bootloader screen comes up but now I get 1% progress on the update and then Error 244 Invalid Model ID.
For info - bootloader screen reads:-
IPL-1.04
SPL-2.10 Olipro
Thanks
pbunn said:
Chunkymonkey, Progress I think....
Bootloader screen comes up but now I get 1% progress on the update and then Error 244 Invalid Model ID.
For info - bootloader screen reads:-
IPL-1.04
SPL-2.10 Olipro
Thanks
Click to expand...
Click to collapse
Invalid Model ID?
Although you have Olipro's clever rework of SPL on (good), have you also Super-CIDed your M3100?
chunkymonkey said:
Invalid Model ID?
Although you have Olipro's clever rework of SPL on (good), have you also Super-CIDed your M3100?
Click to expand...
Click to collapse
I thought I had - I tried a Vodafone SIM card in it and it worked. I'll do it again to be sure.
Phil
Chunkeymonkey,
Used HTC Hermes SIM & CID Unlock - v3a to Super-CID - I still get the error 244 Invalid ID....
Phil
are you connecting thru a usb hub/multi port,if so dont,,,,,, only connect thru a direct usb connection
pbunn said:
Chunkeymonkey,
Used HTC Hermes SIM & CID Unlock - v3a to Super-CID - I still get the error 244 Invalid ID....
Phil
Click to expand...
Click to collapse
Odd. Should only do that when the Hermes believes the ROM you're using isn't meant for it.
Can't remember if the Super-CID happens automatically with the SIM-unlock using that tool or if it is optional. If it was optional, might want to make sure it actually IS super-CID as you might just be sim-unlocked maybe.
To check CID status use mtty.exe. Put your phone into bootloader, disable USB connections in ActiveSync on desktop PC (File > Connections > Disable USB connections) and then plug Hermes to PC. Run mtty and type task 32. Response "Level=0xFF" means it's NOT Super-CID. Response "Level=0" means it IS Super-CID.
Came back with "level=0" but still no joy flashing the rom.
I'm trying to upgrade my M3100 to WM6 - Schaps 4.31. I've unlocked the phone and installed Hard SPL v7. When it goes through the Schaps upgrade, I get to the final 'next' button, press it and then the progress bar appears. The M3100 screen goes blank, activesync closes and then the upgrade hangs. Then a Error 260 conection message comes up and, after a few minutes, the M3100 bursts into life.
I've tried resetting the PC and the M3100 with no sucess. I am using Activesync 4.5 & Windows XP SP2
Click to expand...
Click to collapse
I had exactley the same problem with my M3100.
Try using a different USB port on your PC. Don't what the difference was but it worked for me.
Re downloaded Schaps_WM6Pro_Hermes_4.30_WWE_Full.exe and all seems to work OK. Not sure if there was an issue in the original download but it all looks cool now.
pbunn said:
Re downloaded Schaps_WM6Pro_Hermes_4.30_WWE_Full.exe and all seems to work OK. Not sure if there was an issue in the original download but it all looks cool now.
Click to expand...
Click to collapse
probably would have been worth loading 4.31 WWE. Very stable and fast.
pbunn said:
Re downloaded Schaps_WM6Pro_Hermes_4.30_WWE_Full.exe and all seems to work OK. Not sure if there was an issue in the original download but it all looks cool now.
Click to expand...
Click to collapse
Nice one mate
Now gone to version 4.31 and the phone skin has gone back to the old style.
Do you know where I can get the updated one from? Is there a cab file available?
if you go to --> Start > Settings > Today it should show a list of themes you can apply. just select one and press 'ok'. sorry if this isnt what u mean
raggers said:
if you go to --> Start > Settings > Today it should show a list of themes you can apply. just select one and press 'ok'. sorry if this isnt what u mean
Click to expand...
Click to collapse
Raggers,
No that's not what I mean. In version 4.30 there was a different phone pad tothe one I have with version 4.31 - it has gone back to a wm5 type. Also - there is no 'Airplane' mode in connection manager that allows me to turn everthing off in one hit.
Hi all
Rather than hijacking other threads I thought it might be of help to others if I start a new one.
Having spent hours trawling thru the other threads I have now concluded that I need the help of one of the wise sages such as Cmonex or Olipro.
I decided that a thread might benefit others rather than just pm'ing them.
Ages ago i bricked my ameo.
I had upgraded to spl 3.5 and had been playing with one of michy's roms. Whilst the rom worked fine the boot-up splash screen had become corrupted, I also noticed that the camera had stopped working/initialising.
In an attempt to get the camera back I tried various other roms and decided to downgrade to spl1.2 so that I could go back to a stock rom. In a moment of stupidity I accidentally tried to reflash using a spl3.5 rom.
This resulted in a invalid model id message.
In desperation I did the old vol key down and reset pin. Told the ameo to restore.
From that point onwards the unit is no longer recognised by my pc, in the tricolour boot screen it initialises and says loading 0058002 and then displays
IPL-v1.00
SPL-v1.20 Olipro
I have tried the mtty option, using different computers and different leads, have even tried running the program from the root c: to no avail.
The problem is that whilst in boot loader screen on connection to the pc there is no usb option displayed, nor is there a usb option in the mtty drop-down list.
Pdajoy kindly suggested using a mini sd card to flash the unit. I purchased a micro sd with a mini adapter. Formatted the card to fat32, renamed the ndc file booted to the tri colour boot screen and hit reset. All that happens is that is tries to boot the old fecked o/s and gets as far as a blank grey screen and no further.
I really do miss my ameo- the screen on my touch pro is just too small!!!
Any help will be greatly appreciated.
Thanks
Hope is a typo error here, should be
"rename the RUU_signed.nbh to ATHEIMG.nbh"
Did you removed your SIM card before applying?
Sorry my bad for not warning you in advance.
Grey screen, you mean no text at all. Total blank grey?
Am just curious.
hi Pdajoy
I had renamed the files ATHEIMG.nbh, the reference in my post above is a typo. There was no sim in the phone either.
The screen after it tries to load the old corrupt rom is just a grey mass- nothing else, no text or images.
The two pics listed show the ameo booting and then the grey screen.
http://imaginarynumber.co.uk/ameo/IMAG0033.jpg
http://imaginarynumber.co.uk/ameo/IMAG0034.jpg
hi imaginarynumber,
Thanks for the photo.
hey 4.00 on screen, I believe your set is still spl 3.5
If it is my set, I will definitely flash AP4 again.
Best wait a little while for kind sage to drop by with to assist you.
Don't wish to see you bricks yours.
I have the same problem what can we do ?
I found a way to bring back the normal bootloader you just have tu press the reset button then you press the camera button and you will have your bootloader again
IT IS NOT WORKING you get back to the original bootloader but when you want to put back a rom even the official one after 1 percent it gets back to the grey screen PLEASE HELP
Srry athena works again place the mmty tool with mac bin file in the root of c and try again dont forget the task 32 command before the bin command that worked for me
I had the same exact problem (even the screen was the same) and didn't realize that the initial screen that shows up isn't the bootloader. fixed it by waiting for the grey/white screen, holding the volume button down then reset button and camera button + reset which brought me to the actual bootloader. From there I installed the latest AP rom, updated my radio and installed mitchy's 6.1
Big problem: Mac Address? Still getting dark screen and blue stripes!
Hi, I have follow the various steps above, however I cannot boot my Athena after words.
I am lost! I have followed exactly the steps:
1. disable activesync and put mtty into the C:/ root
2. connected athena as usb and booth with 3 colors screen
3. run mtty
4. done the cmk
5. selected port usb and created the .bin file for my SPL (1.2)
6. in mtty run task 32 and went up to: "code entrypoint unknow"
When I boot again my Athena I get the same dark screen with blue stripes:-(
You need to flash a rom
puffo said:
Hi, I have follow the various steps above, however I cannot boot my Athena after words.
I am lost! I have followed exactly the steps:
1. disable activesync and put mtty into the C:/ root
2. connected athena as usb and booth with 3 colors screen
3. run mtty
4. done the cmk
5. selected port usb and created the .bin file for my SPL (1.2)
6. in mtty run task 32 and went up to: "code entrypoint unknow"
When I boot again my Athena I get the same dark screen with blue stripes:-(
Click to expand...
Click to collapse
It looks like you did the wifi fixx correctly but the rom is still corrupted
Go into bootloader to confirm your SPL and then flash an spl appropriate rom
cheers
So, how to proceed now?
Dear Iakeman, all,
how can I confirm now my SPL and than flash the ROM?
I confirm that on my 3 color band screen I have:
IPL-v1.00
SPL-v1.20 Olipro
So, what is next??? If I just reset or restart the Athena in the normal way I will get back the dark screen with blue stripes and nothing will happen....
Do I have a this stage to install a new VM ROM? But I am wondering if I can do that since not sure that in this mode the Athena can communicate to my PC and so being able to upload on it any ROM....
puffo said:
Dear Iakeman, all,
how can I confirm now my SPL and than flash the ROM?
I confirm that on my 3 color band screen I have:
IPL-v1.00
SPL-v1.20 Olipro
So, what is next??? If I just reset or restart the Athena in the normal way I will get back the dark screen with blue stripes and nothing will happen....
Do I have a this stage to install a new VM ROM? But I am wondering if I can do that since not sure that in this mode the Athena can communicate to my PC and so being able to upload on it any ROM....
Click to expand...
Click to collapse
You have confirmed that you have spl1.2 by quoting what you have seen in the tricolor screen.
Get back into that screen , making sure you have removed the sim and sd card and then conect to your computer via the usb cable.
You would have downloaded an spl1.2 rom ( you previously stuffed the radio by trying to flash an spl3.5 rom) and then run the romupdateutility .exe .
then you should be sweet!
having read a reply of cmonex to another post I am starting to think that all hope is lost.
It seems that if windows is unable to recognise the phone it is possibly the case that it is completely f*cked!!!
It would be nice if someone could clarify this...
Which WM to ul now?
Dear Iakeman,
thank you so much for your kind reply. So at this stage I can try to upload to my Athena device, basically, any spl 1.2 rom of WM 6.0, or 6.1 or even the 6.5 beta?). Or I must start with spl1.2 rom WM 6.0 ?
Yes! It works!
Hello, after so much pain, I have follow the Cmonex post 33 to fix my broken firmware and now I have been able to upload properly the VM 6.5.
Many thanks!
imaginarynumber said:
I have tried the mtty option, using different computers and different leads, have even tried running the program from the root c: to no avail.
The problem is that whilst in boot loader screen on connection to the pc there is no usb option displayed, nor is there a usb option in the mtty drop-down list.
Thanks
Click to expand...
Click to collapse
just a thought.
Once you finished doing mtty, did you reenable usb in activesync as per this post
http://forum.xda-developers.com/showthread.php?t=387454&highlight=mtty&page=2
the other thought was is the usb cable and the usb port able to sync with other wm devices? maybe the slot on your athena is faulty?
Hi Lakeman
Thanks for the reply.
It is possible that the usb port is faulty but it seems improbable that this should have failed at exactly the same time as me stuffing up the O/S.
I will try to find the cmonex post to which I am refering later today (the one that suggests that the phone is stuffed).
Tnx
when i type task 32 show this plz help
Cmd>task 32
Level = FF
puffo said:
Hello, after so much pain, I have follow the Cmonex post 33 to fix my broken firmware and now I have been able to upload properly the VM 6.5.
Many thanks!
Click to expand...
Click to collapse
HI PUFFO,
WHICH Cmonex POST 33 R U REFERRING TO?
I M FACING EXACTLY THE SAME PROBLEM THAT U FACED AND AM WAITING FOR THE NEXT STEP.
KINDLY REFER ME TO THE POST SO THAT I CAN START USING MY ATHENA.
THANX
Hello Everybody,
My mobile at&t 8525 alias HTC 8525 is stuck in windows operator logo.It would not boot further. It happened while I tried to upgrade it from Windows 5.0 to Windows 6.0.First I got a tri-colour screen,but in a hurry I tried to backgrade to windows 5.0 again.
Other problem the mobile cannot be synced. I have installed Microsoft Active sync 4.5. Even then it could not be synced.
I tried to read all the posts ,but could not understand anything.
So please help me in getting my mobile repaired
Don't worie.
I had somewhat the same issue with a bad ROM flash.
Just disconnect the USB and boot to the bootloader screen (the tricolour screen) and you should be able to reflash the phone again.
Problem in syncing the mobile
I am not able to sync the mobile to the laptop.I have installed Microsoft Active sync 4.5. Even then it is not syncing.So how could I run the hermes upgrade if the mobile is not helping.
Please help
In Activesync on PC - Untick "Allow USB Connections".
Put the Hermes into bootloader (tri-colour screen) and connect by usb. Run the RUU_Wrapper.exe file you want. Follow onscreen instructions.
You need to have installed Hard SPL V7 for this to work...
did not work
Hello Boss
I tried to follow the procedure you suggested me. but it did not work. I tried with Hard SPl 7.0.
Please give me some suggestion
you dont need an active sync connection to flash it. Enter bootloader(tri colour screen) as you were told in the previous posts and Just click on the boxes that you do have a connection(even though you dont) and then flash the rom.
@ultramag69 i hve never had to untick allow usb connections and i have cocked up loads of rom flashes, saying that i have never had a problem flashing in vista either so maybe i am lucky
If you still cant flash doing it this way, then maybe you should try flashing from sd card instead, just make sure the battery is fully charged. Full instructions of how to do this are found in the hermes wiki, which i advise you to read anyway.
Oh and good luck anyway, you should be able to recover the phone from this ,so i wouldnt fret too much
Guess he isnt hardspl'ed... then his batt is death... must to flash a shipped rom.
correct me if im wrong.
Problem with upgrade At&T 8525 mobile
Hi!
I'm having problems with my Cingular 8525, after I made the upgrade to WM6.1 (FARIA-R32-XDA2_WM6.1.rar) for WM 6.5 (FCWs_stock_like_6.5_v3.rar), and slowed my device does not work anymore. He died.
I need help please. How resurrect it?
Excuse my English.
english is not the problem here cause we need more info... device info SPL IPL hardSPL? you go from 6.5 to 6.1?
Do you try to flash first the Stripped?
Does your batt has charge enough to boot?
There are many many things to say so... start to tell us all your history!
Hi
I tried to Hard spl with Hard Splv7. But I got a error. I even tried the Sd Card method.Its says loading and I get the tricolour mode. If I press the Power button its not showing the status of upgradation.
Where can I get a shipped rom. Actually my Spl is 1.11.
Hi
I tried to Hard spl with Hard Splv7. But I got a error. I even tried the Sd Card method.Its says loading and I get the tricolour mode. If I press the Power button its not showing the status of upgradation.
Where can I get a shipped rom. Actually my Spl is 1.11.
check the wiki pages for your device in the upper bar of this web forums
there are many official roms.
I also am currently using an 8525 (Herm100). It was received from an Ebay deal with WM5. I flashed it with the ATT OEM WM6pro (aka shipped wm6). Once it hit the three color boot screen, it sat on that for a couple of minutes then started cooking. Once it showed a progress bar, it took about 3 minutes to cook the WM6 over the WM5. It also showed a popup that stated going back to WM5 was not an option.
I would suggest running the installer again and going down to 7-11 for a refreshment. You may not have let it percolate long enough to set itself up for the actual ROM overwriting.
gorkalraghavendra said:
Hello Everybody,
My mobile at&t 8525 alias HTC 8525 is stuck in windows operator logo.It would not boot further. It happened while I tried to upgrade it from Windows 5.0 to Windows 6.0.First I got a tri-colour screen,but in a hurry I tried to backgrade to windows 5.0 again.
Other problem the mobile cannot be synced. I have installed Microsoft Active sync 4.5. Even then it could not be synced.
I tried to read all the posts ,but could not understand anything.
So please help me in getting my mobile repaired
Click to expand...
Click to collapse