i tried to install another rom, Hermes_WM6_WWE_vp3G_v3[1].61.0_ATT_Full.rar and Touch_I_interface_beta.zip and crashed. and now, i enter in bootloader, if i want to make super cid it tells me to connect the pda even if is connected. and if i try to install other roms is stuck on 0%
try this http://forum.xda-developers.com/showthread.php?t=295735
next time use find function first!
greetz kirkdis
thank you. 10x
Hermes died? Buy a Kaiser..much better
sorry, but didn't worked. exactly like update rom, error 262.
Bram87 said:
Hermes died? Buy a Kaiser..much better
Click to expand...
Click to collapse
to buy a kaiser i have to have money, and I don't have them. I want to make this working, 'cause i've payed a lots of money for me
does exists any way to upgrade my dead tytn from storage card? I have an Qtek S200 and a HTC P3300 (if i can use them to restore my dead tytn). please all. I don't know what to do with him
ady_uaic said:
sorry, but didn't worked. exactly like update rom, error 262.
Click to expand...
Click to collapse
Give more detail about your device, SPL? Radio version? Custom RUU version that you use?
i can't give you more that SPL 2.03 because the rest (RUU, radio) doesn't work. I can't enter in my device (i tried several custom RUU, still nothing, remaing stucked on 0%)
my first SPL was 1.03 but after a try of upgrading ROM it was modifed in 2.03 and i think this is the problem. does anyone knows how to modify it?
how can i downgrade my SPL ?
A quick fix
I am willing to take your bricked hermes off your hands for $40 US. I know, I am too kind.
i'm thinking that his big problem is at radio sigurance. what can i do?
his problem is on radio. when i'm flashing, on radio is stopping.
Related
Hi,
i have one bricked Hermes,and I've tried all the methods that i read ever and i explained completely here:http://forum.xda-developers.com/showpost.php?p=1571302&postcount=1548 but no result.
yesterday i tried SD method with wm6 ROM that i downloaded from htc sit ,but i had this on my screen:
HERMIMG.nbh-
IPL - OK
BOOTLOADER - OK
SPLASH1 - OK
SPLASH2 - OK
EXTROM - OK
GSM -
OS -
Update In Progress...
it freezes at GSM!!i waited 45min,but nothing changed,then i take out the battery.
do you know why?and what can i do?
sorry for my bad English.
hamed_ppc said:
Hi,
i have one bricked Hermes,and I've tried all the methods that i read ever and i explained completely here:http://forum.xda-developers.com/showpost.php?p=1571302&postcount=1548 but no result.
yesterday i tried SD method with wm6 ROM that i downloaded from htc sit ,but i had this on my screen:
HERMIMG.nbh-
IPL - OK
BOOTLOADER - OK
SPLASH1 - OK
SPLASH2 - OK
EXTROM - OK
GSM -
OS -
Update In Progress...
it freezes at GSM!!i waited 45min,but nothing changed,then i take out the battery.
do you know why?and what can i do?
sorry for my bad English.
Click to expand...
Click to collapse
Hi I have the same problem, radio refuse to flash, something wrong with my radio chip, I have a OS but no gsm. "Welcome to the club" But, I don't know how to solve that problem.
eraserbabyboy said:
Hi I have the same problem, radio refuse to flash, something wrong with my radio chip, I have a OS but no gsm. "Welcome to the club" But, I don't know how to solve that problem.
Click to expand...
Click to collapse
ok,we can continue this thread to find the solution,is there anybody knows how we can fix this problem??
is it a hardware problem??i wish it isn't.
hamed_ppc said:
ok,we can continue this thread to find the solution,is there anybody knows how we can fix this problem??
is it a hardware problem??i wish it isn't.
Click to expand...
Click to collapse
I think that is hardware problem. I flash only OS, without radio and now my hermes work only as PDA, wi-fi and BT also work, but still no gsm.
eraserbabyboy said:
I think that is hardware problem. I flash only OS, without radio and now my hermes work only as PDA, wi-fi and BT also work, but still no gsm.
Click to expand...
Click to collapse
ok,but how we can fix it?Should we replace something in our pda??
i want to know is it fixable or not??
hamed_ppc said:
ok,but how we can fix it?Should we replace something in our pda??
i want to know is it fixable or not??
Click to expand...
Click to collapse
I don't know. In my country I have a htc services and they say to me that my motherboard must be replaced because is to hard to change only radio chip and they only change all motherboard. For 350 Eur(+some Eur) I can by new Tytn. Now I use my pda in my home (in toalet) via wireles to look internet. Work's fine, but sometimes freeze OS and I must do soft reset.
ok guys , i might found a temp solution or maybe it will work permenantely with some one , but i need some one who have spare time and steel nerves coz i'm sick and tired of trying many files and roms and radios .
so any one is willing to start this experiment with his hermes and his spare-time lets begin .
first of all i want to declare that this method revived my radio and i used my device for one day just fine receiving and making calls . then the next day i decided to make a hard reset to see if the radio will stay working , and the result was the radio was dead .
here we go .
1.flash you device with GM360 gold edition http://forum.xda-developers.com/showthread.php?t=329282 don't ask why just try it .
2.after the phone is flashed with gm360 and working ok with no radio or "no gsm" messege now you should flash your phone with your device manufacturer WM5 ROM .
3. to flash WM5 rom you need to follow mr.vanx guide for safe WM5 downgrade . http://www.mrvanx.org/cms/index.php?option=com_content&task=view&id=27&Itemid=26 here it is .
4. now after you've flashed WM5 successfully and your device is also working fine with it but still no radio or "no gsm" . you need to flash only radio to your device . no OS only the radio .
5. download this radio . http://forum.xda-developers.com/showthread.php?t=334697 and unrar it on some folder . and don't flash it yet to your device .
6 download Olipro RUUwraper 5.2 http://forum.xda-developers.com/showthread.php?t=298737 there u go.
7. now the files from step "5" which they are the radio 1.54 put the file ruuwrapper from step "6" in the same folder with them to start the radio upgrade using "RUUWrapper.exe" not "ROMUpgradeUt.exe" . when u run it you will have multiple choices , choose "Force Unsafe SSPL (not recommended)" . .
now the radio upgrade should go smoothly as it went for me the first time . after the radio upgrade is done u should be able to use ur radio fine .
now can some one take half the effort of me writing this long method and try it ? thanx for the feedback also .
good luck for all .
feedback
Just now I finished all, by your instruction, step by step. When do the last step, flashing radio rom it's stuck on 0%. Many thank's for help, but it does not work for me.
a-h-t1,
thx for your discription,I'll try your method as soon as i can(because ADSL isn't much available!!)
eraserbabyboy,
can you tell me when did this problem happen to you(i mean loosing GSM)??did it happen when you was flashing WM6 ROM??
I really want to know why this problem happen to me while i didn't have it before flashing??is flashing cause to a hardware problem???
eraserbabyboy,
can you tell me when did this problem happen to you(i mean loosing GSM)??did it happen when you was flashing WM6 ROM??
I really want to know why this problem happen to me while i didn't have it before flashing??is flashing cause to a hardware problem???[/QUOTE]
Hamed I dont know what's happened with my hermes, because I get him with the no gsm error. I have a bootloader 1.09 with enable kitl mode. In PB I lose many, many night to boot os but without sucess. And post many question here, but without answer, a-h-t1 is the first men who try to help and meny 10x for that.
So, before 2 week I send my hermes to Imei-check and before few days I get it back with bootloader 1.01 mfg and instruction from imei teamroblem_Description: The radio chip is faulty 100%. Now the handset is usable as PDA only (wifi + bluetooth working too), but not as a phone (the GSM module refuse to answer/flash).
DO NOT attempt to upgrade the firmware in the phone with a firmware which has RADIO upgrade, as it will put the handset back to the brick mode!!!
Model is SVP3100.[/COLOR][/COLOR]
After that I put the SPL 2.30 Olipro to prevent any future damage, and continuing to "play" and experiment, because I don't have more than, to loose. I have P3300 who work's very nice....
It's possible to boot any OS without radio. (I use nbh tool 1.01 to extract nbh file to nb and after make Ruu_signed but without radio).Also try metod via SD card and same to you, stop when try to flash radio. Also it's happened on 12-13%(independed of the rom version) when start full RUU upgrade. And when try to flashing only radio they stop on 0%. On 12-13% ruu upgrade try to flash radio in this moment, and this is the end. I am not sure is this hardware problems, but imei (I dont belived too much) said YES. In win OS I don't have a imei identification (in device info/identity) and of course radio version is blank. Sometimes happened that os blocked(freeze) or device just totaly go to power off mode and I must to do soft reset. Is any way to totaly disabled phone function in registry? I mean that freeze when phone try to find network or sim, but I am not shure. Last night I open my devices, and get out motherboard, just to see this famously radio chip. It's not possible in "home made" to change yourself this chip. Only if I have a more lucky and found some broken hermes with ok motherboard for 100-150 eur...
I hope that my info just little help to you to know "mystery" about our problems.
And one more time 10x to a-h-t1!
eraserbabyboy said:
Just now I finished all, by your instruction, step by step. When do the last step, flashing radio rom it's stuck on 0%. Many thank's for help, but it does not work for me.
Click to expand...
Click to collapse
I just tried it and same result like you
but many thx for a-h-t1 and eraserbabyboy's help.now I want to try fix it in hardware way!!
but if anyone has idea about our problem please say here.i think it's going to be common problem,because i see many people in xda who has the same problem.
Read this, to see how I solve my problem. But I still have a hope, that it's not hardware problem and in the future I hope that someone will found software key to solve our corrupted radio.
http://forum.xda-developers.com/showthread.php?t=338413
ok,i think it was almost three months ago that i had posted my last post!!
you know my problem and i feel it has became a common problem for poeple who have hermes,unfortunately.
last week,i found a service man who believed that my phone's problem is fixable.
so i gave my pda to him,and because he lives in another city,i returned to mine and waited for him.
yesterday i phoned him,and this is what he said to me:
"first,I tried software methods,but the result was nothing!then I disassembled the device and changed the piece of RF of your ppc.it hung first,but now it loads the windows and find the antenna too!!but immediatly after finding,it hangs."
he has used the Dopod's RF in my htc TyTN and thinks that this problem(hanging after finding the antenna) is because of not matched radiorom.
I have good feel about his say,and i'm trying to help him find the correct radio rom,because he is so busy and cant search the internet to find the radiorom.so I've mailed him the link of wiki's radio rom for hermes and I hope someday this tragedy will finish but i'm not sure.
if anyone have comment about this case please help us,specialy about the RF,because I don't know anything about the Radio Frequency.
I HAD the EXACT same problem I Hermes would get stuck at 11% EVERYtime I tried to flash the OS rom with WM6!! The upgrade process would start and then [email protected]! 11% and I would get ERROR 262 (loss of communication) No FIX anywhere, even with site full of "supposed Hermes Fanboys" Nothing NOBODY knows nothing bout this issue. BUT I think I have found a fix (I have recovered twice gonna do it 1 more time to confirm METHOD)
1a
Its called a 1a brick. Look in the sticky brick section. like 170+ pages of this issue. I believe I have the same device. No GSM/ no imei no radio. Can flash rom's all day long, as long as rom doesnt include GSM. Try to flash ANY GSM does nothing, let it sit 10hrs... Nice free PDA, till i can figure out the wiki & there must be hope for me. Till then my wiz100 keeps rocking. Like the 8525, but wanted it more as a phone then just pda.
nicknowsky said:
I HAD the EXACT same problem I Hermes would get stuck at 11% EVERYtime I tried to flash the OS rom with WM6!! The upgrade process would start and then [email protected]! 11% and I would get ERROR 262 (loss of communication) No FIX anywhere, even with site full of "supposed Hermes Fanboys" Nothing NOBODY knows nothing bout this issue. BUT I think I have found a fix (I have recovered twice gonna do it 1 more time to confirm METHOD)
Click to expand...
Click to collapse
I hope you will fix your device,but when I read about your solution,I felt that guy who brought back to life your device,has just used a ROM whitout GSM,the way that we have been using since months ago.if I'm in mistake so tell us more.
The end of the Tragedy
o0o0k!!
as I've said in my post,the service man that I love! replaced the RF of my pda,but new problem was hanging after finding the antena!!
as he told me yesterday,he tried another used RF,but this time the TyTN's one and it worked) and there is no problem.so after 4 months nearly I can use my pda.
as soon as I can,I will go to get my device and test it myself.
be wait for my smooth experience!!
What is this???
replaced the RF of my pda
Andrey_ORIN said:
What is this???
replaced the RF of my pda
Click to expand...
Click to collapse
its full name is RFSP=Radio Frequency Signal Processor.it's one of ICs on your Hermes mainboard.it needs a professional to replace.I'll explain more early.
but if you have same problem and have tried all of the the wiki methods then you can test my solution.
Helo everyone, im currently in limbo about what to do..
i've been using the official HTC WM6 rom on my 8525 with radio v1.40 i think.. i've been loosing signal 2 to times daily. I upgraded to Radio 1.57, everything worked much better then 48 hours later the radio went dead.
i've been using 2 different WinXP PCs but both have the same results so im sure its not the OS..
I've been reinstalling different OS without any problems but always reports NO GSM, i've tried running SSPL-HERM from within WM6 and run the flash from the radio 1.54.07.00 firmware here on XDA-Dev but still 0% progress on the "updating the rom".. error 262 update error..
The phone is using HRM100 IPL-1.04 SPL-2.10.Olipro
Could it be:
A - bad block? if yes, how do i fix it?
B - phone is bricked?
C - damaged radio (physical hardware)
Any help would be great!
I have EXACTLY the same problem....! Now I am worried that I'll get busted on the Warantee rap despite it being the offical T-Mobile release for WM6 for HERM300! Mine stopped working after 12 hours. I have a HERM300 and cannot flash the Radio back. Be careful... I think it's a bad block or something permanent. Trying to flash it back to WM5 and send it back for repair bit it's not looking so good at the moment. Will help you if / when I can.
Seems like all radio's starting to break
I didn't even flash mine and it is broken, can flash everything except for the radio part.
now using it like a normal PDA, using internet through bluetooth with my old phone.
Just 10 months to go before I can get a new phone, I don't think it will be HTC again, never got support from them, only from this website.
i found the best way to flash is by using the sd card method, I always use this method to flash my vario II
indie said:
i found the best way to flash is by using the sd card method, I always use this method to flash my vario II
Click to expand...
Click to collapse
tried it, but freezes at like 10%, how do i go about repairing bad blocks?
i tried the SD card method, no good.. i checked the unit, no bad blocks =(
How did you check for bad blocks? Wanna do the same for mine. Cheers.
Try to use an earlyer RUUwrapper after exctract the .exe file. It solved my same problem. I tryed to flash Schaps 4.00 and stoped at 0% I extracted the 4.00 and the 3.60 roms and I overwrited the 4.00's ruuwrapper with 3.60's ruuwrapper and I launched it (4.00) I can flash with that ruuwrapper without problems I hope it works to you too
mine JasJam (shaps 3.54b) gives the same problem.no gsm signal and after try to upgrade radio,it stuck at 0% and now is always at the 3 colour screen also after off-on battery...what can I do..please Help me!!!!!!
mickscores said:
mine JasJam (shaps 3.54b) gives the same problem.no gsm signal and after try to upgrade radio,it stuck at 0% and now is always at the 3 colour screen also after off-on battery...what can I do..please Help me!!!!!!
Click to expand...
Click to collapse
I think your problem is bigger, because if you haven't got gsm signal than maybe your Hermes has bricked...
that means that I will never fix anymore my hermes????
mickscores said:
that means that I will never fix anymore my hermes????
Click to expand...
Click to collapse
I think you can unbick you hermes, but i don't know how exactly... I should read a lot here and ask befor do anything:
http://wiki.xda-developers.com/index.php?pagename=HTC_Hermes
and here:
http://wiki.xda-developers.com/index.php?pagename=Hermes_Unbrick
Have you ever dumpeb your ROM? Because if you have the dll-s befor brick than, if I know well, somebody can solve the problem with a service cable...
GorTen said:
I think you can unbick you hermes, but i don't know how exactly... I should read a lot here and ask befor do anything:
http://wiki.xda-developers.com/index.php?pagename=HTC_Hermes
and here:
http://wiki.xda-developers.com/index.php?pagename=Hermes_Unbrick
Have you ever dumpeb your ROM? Because if you have the dll-s befor brick than, if I know well, somebody can solve the problem with a service cable...
Click to expand...
Click to collapse
Is it me or are suddenly lot's of TYTN's losing their radio en IMEI, i lost mine too now it is just like a pda, using my old phone with bluetooth for internet. Impossible to flash the radio. Os only works fine.
Yep! Dunno why. GSM appears to be dying, Just got mine repaired in the post from T-Mobile. Just did a quick MTTY check on it (info 8) and there is BAD BLOCK on it already!!! Repaired???? Not so sure. Should I risk HARD-SPL and flash the rom from WM5 to WM6?
Hello,
i am trying to install a the old WM 6.0 on my O2 XDA because the Hermes does not start every time i turn it on. The Problem is that the install stops at 12 %. After five our six trails the install rans through this point and completes the install. But this WM 6.0 has the problem that it will not boot every time, the phone-functions does not work every time and so on. So i tried to reinstall the OS and now i'm standing on 12 %.
The WM 6.0 install comes directly from O2.
Here the dates out of my bootloader:
HERM100
IPL-1.04
HERM100
SPL-2.10.Olipro
Sorry if my question is a little bit stupid. But my english is very bad (as you can see ) and so i can't find an answer.
Can someone help me?
Try to reinstall the shiiped carrier rom. The rom it originally came with.
Do this using the sd card method. Its safer, especially if you are flashing a radio rom.
Check for bad blocks. This could cause the original symptoms you said. Look in the upgrading ection for instructions...
Cheers...
Thanks for the infos, but i have phoned with O2 today. They will repair or exchange my device.
No my question is if i am allowed to change the bootloader to "SPL-2.10.Olipro" because i have done that
Or should i try to downgrade to an older version? Do you know which version was first on the device?
Thanks
push. Could someone help me plz?
If you're trying for a warranty service then it would be best to downgrade spl. However, you may not be able to....
Search the wiki for instructions, they are there...
Cheers...
Hmm damn, do you think they won't exchange the pda with the changed bootloader?
As you remarked it semms to be hard work to replace the bootloader by an old version.
There is a chance they MAY charge you for repairs or replacement. This can be VERY ouchy....Lotsa $$$.
Perhaps i should ask the hotline if it's okay or not. Even better than paying bills for sending in an bricked Hermes.
NOT OK... Changing the SPL on your Hermes is instant void warranty. You need to change it back.
Any idea on which version?
No one any idea which SPL original is on a Hermes?
Hey!
Now i have tried to downgrade to 1.10 Olipro, have installed a WM 6 Rom from HTC but nothing happend. The device works for the moment, but i am sure that the device will break down the next days again.
Any other idea how to downgrade to SPL 1.11? I am running out of time
No idea? Anyone? Running out of time (warrenty) ^^
I'm very sorry if there is another topic around this subject, but i have very big problemes with my phone.
The phone is sim locked, and i think this may be one of the problems(but i could be mistaking).
I cannot flash hardspl, not even sspl, radio or a rom. I've tried even flashing from the sdcard, but of course no result.
When i use Ruu, all goes whell until the phone reboots, on the computer i get the update error 262, and on the phone it stucks at 0%.
Please help me i lost a half a day with this phone.
draghiciandrei said:
I'm very sorry if there is another topic around this subject, but i have very big problemes with my phone.
The phone is sim locked, and i think this may be one of the problems(but i could be mistaking).
I cannot flash hardspl, not even sspl, radio or a rom. I've tried even flashing from the sdcard, but of course no result.
When i use Ruu, all goes whell until the phone reboots, on the computer i get the update error 262, and on the phone it stucks at 0%.
Please help me i lost a half a day with this phone.
Click to expand...
Click to collapse
The Touch Dual comes in several varieties. A bit more information is needed.
Take the battery out the back and read the model number.
i ve managed a few minutes a go to flash hard spl, a new radio version, an a coocked 6.5 rom. but the phone it's still sim locked so i think that cidunlocking didn't work.
I have the 16 key version, Niki 100.
Thanks!
draghiciandrei said:
i ve managed a few minutes a go to flash hard spl, a new radio version, an a coocked 6.5 rom. but the phone it's still sim locked so i think that cidunlocking didn't work.
I have the 16 key version, Niki 100.
Thanks!
Click to expand...
Click to collapse
CID unlock it. You'll need to downgrade the SPL to Hard1.15 to do so. Re run SSPL, and then HardSPL 1.15 and follow the steps in the CID unlock thread.
draghiciandrei said:
i ve managed a few minutes a go to flash hard spl, a new radio version, an a coocked 6.5 rom. but the phone it's still sim locked so i think that cidunlocking didn't work.
I have the 16 key version, Niki 100.
Thanks!
Click to expand...
Click to collapse
I'd really like to know how you got pass the error [262]
I have a Nike with SPL 1.22.0000, recently upgraded wit hofficial ROM to WM6.1
Thanks
Hello
after upgrading i'm stucked in spalsh screen (the one with rom version and others...). can i skip this step? the device is lost?
do you have others questions?
Cheers
no one?
Hi.. did I broke the device?
Cheers
Hi!
Give us more info about your device.
IPL,SPL,installed ROM,etc
Did you try hard reset?
BR
Szig
Here you have the answer like given many times before:
If format fails it is hopeless.
If format goes well and works take the original Aku3 ROM and flash it. The device will work again.
Stuck in splashscreen
High to all
I have a problem with my Charmer - I was flashing it, when I didn't read any instructions and I failed it. Some month ago I came back to Charmer and I repaired it with the "Rescue Kit" and it worked some time. But now even if I flash it with any ROM, my PC write "Congratulation", Charmer turns on but stuck in the splash screen and It's all... when I go to bootloader, it goes and write the IPL and SPL, but when I do Hard reser, it writes "Formad failed", but It can be flash!!! With any ROMs... Please, help me, I like this phone...
punker1993 said:
High to all
I have a problem with my Charmer - I was flashing it, when I didn't read any instructions and I failed it. Some month ago I came back to Charmer and I repaired it with the "Rescue Kit" and it worked some time. But now even if I flash it with any ROM, my PC write "Congratulation", Charmer turns on but stuck in the splash screen and It's all... when I go to bootloader, it goes and write the IPL and SPL, but when I do Hard reser, it writes "Formad failed", but It can be flash!!! With any ROMs... Please, help me, I like this phone...
Click to expand...
Click to collapse
ChrBeck said:
Here you have the answer like given many times before:
If format fails it is hopeless.
If format goes well and works take the original Aku3 ROM and flash it. The device will work again.
Click to expand...
Click to collapse
Hi!
As you can see mostly it is hopeless.Rarely rehotting DOC chip can help and I read somewhere that sometimes flashing helped,but that was a desperated try with Prophet ROM or something like that.If I was you I could try to flash it with Goldcard (just from curiousity and nothing to lose),but if ChrBeck can't help then who?
BR
Scootie
OK first:
Yes that mith with the Prophet flashing is true. But for that we need a working Aku1 ROM to get the IPL down.
Then the Prophet thing works. That is what I found out.
The heating up thing is a mith. It helped only 1 time and is not the best you can do.
And Goldcard is the biggest SH*T I ever heared.
For devices without reachable OEMSPL something like a Goldcard doesn't exist. Goldcard just flashs with SuperCID and without Signature checking. It is like using a HardSPL and won't help.
That is all I know.
Get a good working AKU1 and I'll build you the solution (if my idea is realy right).
ChrBeck said:
OK first:
Yes that mith with the Prophet flashing is true. But for that we need a working Aku1 ROM to get the IPL down.
Then the Prophet thing works. That is what I found out.
The heating up thing is a mith. It helped only 1 time and is not the best you can do.
And Goldcard is the biggest SH*T I ever heared.
For devices without reachable OEMSPL something like a Goldcard doesn't exist. Goldcard just flashs with SuperCID and without Signature checking. It is like using a HardSPL and won't help.
That is all I know.
Get a good working AKU1 and I'll build you the solution (if my idea is realy right).
Click to expand...
Click to collapse
Hi!
Thanks for the answer.
Just a few things:
I'm in searching for an AKU1 ROM.I had it on my computer years ago,but it lost when my HDD damaged.If I find it,I will upload it for you.
The heating up:in this case probably it doesn't help.When we have a device that can't be flashed properly,we try this and it helps more often than you think.Not only with PDAs,but with phones too.
Goldcard SH¤T:
I know what is Goldcard about.
The reason I mentioned it,it helped me 3-4 times when the device (not only Charmer,other devices too) stuck on bootloader or splash screen after flashing.I didn't have too much time in the workshop,so I tried this and worked.
I don't want to argue with you,I know you are an expert in this,I just tried to help with my experiencies.
BR
Scootie
P.S.:I found it on the xda-developers ftp server: RUU_Charmer_1120223_11202110_11220_T-MobileUK_Ship.rar
ftp://xda:[email protected]_1120223_11202110_11220_T-MobileUK_Ship.rar
OK nice that you found the ROM. Maybe we'll have a new test package for the fix of format failed error soon then.
And yes you are right sometimes Goldcard helps if you have forgotten to flash HardSPL or it is damaged then it may help but you need to have acces to OEMSPL and we don't have it.
So hope I can do something soon.
Hi!
I have a question:
I have a Charmer with IPL,SPL 3.08.Unfortunately it is CID locked,so I can flash it with official v3 ROMs only.Is there any solution to downgrade it?Or with JTAG only?
Thanks in advance!
BR
Scootie
The NoID RUU will be able to downgrade it.
Hi!
I tried that,but:
1.flashing is successful,but nothing has changed,I get the old OS after upgrade
2.I tried the v1 ROM I found.The IPL has been changed to 1.12,but the SPL remained 3.08.The OS has been changed in this case,so it worked flawlessly.
The CID unlocking methods didn't work (obvious,SPL was 3.08).
After that I tried to upgrade it,but it was a torture.I got errors and errors,but after an hour finally I could upgrade it successfully.
So,if you have an idea,I have a device to test it.
BR
Scootie
The IPL is down means it worked. After that you can flash a Prophet ROM.
What ROM of Prophet?
High, I was today flashing my Charmer with all original ROM I mean and the flashing process behaves OK, after flashing, it writes "Congratulation" and all the things like OS, Radio, IPL... are change to the definite ROM. But it's all. It will stuck in the splash screen... I have read in this thread something about Prophet ROM. What is it?
The prohpet ROM is an official Prophet AKU 2 flashable after downgrade.
System is as follows:
Fist flash the Charmer AKU1
Then flash a Prophet AKU2
Then flash Charmer Aku3.
You need to do all these steps with the NOID RUU.
That should fix the HardReset failing.
I'm working to get a tool running that does the whole thing automatically.
THX
Oh ****, Thanx 4 quickly answer...And I'm waiting :-D
Ok, so now I'm having
IPL 1.12
SPL 1.12.0000
GSM 01.12.20
OS 1.12.2.23
And I'm waiting 4 your instructions...
How have you gotten the SPL down?
Normally, with flashing... It can be flashed with every ROM...
OK. Cause normally SPL stays up. I never saw a full downgrade.