Enable Chinese reading/writing in ATOM WWE WM5&WM6 - iPAQ rw6828, XDA Atom Software Upgrading

Guys,
To enable chinese writing in your device
1. Get a chinese font and put it in /windows folder
2. Create a link in registry to link the font so that system can use them
I have attached the chinese font i used with the reg file in the Chinesefont.rar
**Note that you CAN use any other chinese font, you just have to edit the .reg to link the font to your system eg. sunglobe
**New added sunfon cab simply install it to read chinese!!
***New updated cab (Now support chinese in IE and MSN!!)
http://www.mediafire.com/?6t1vc0mnfzz
To enable chinese writing
i had tried many SIP and not many is working for WM6. For wm5 thats no issues except conflicts with other SIP especially PhonePad.
For WM5
I recommended you to use PlumSIP 5.0.2 as it has T9 Pinyin and T9 Eng+T9 Dictionary!! So even if PhonePad conflict and cant be used, you can still use it for T9 Eng
**Notes it lacked the auto space after selecting a word for T9 Eng.
For WM6 AKU0.3
I cant get anyother chinese SIP to install except PlumSIP5 PPC10 Beta 0615.CAB. So no choice, although theres conflict with phonepad(not included in this release). At least you can type chinese and english on this keyboard
**Notes it not T9 Pinyin nor T9 Chinese, just keyboard for both.
For WM6 AKU0.7 beta
I managed to get ZTA4_PPC2005_QVGA_SIP_v2.0.14.CAB and PhonePad (builtin the ROM) working!! Thank to Jiggs to solve the PhonePad issue!!
**Notes need to switch to ZTA4 for T9 Chinese and PhonePad for T9 Eng. Although sounded troublesome, but its working great with no conflicts switching between both of them
For WM6 AKU0.7
I preferred to use PlumSIP6 as it had better T9 Eng and T9 Pinyin + large keyboard with PCMkeyboard's indicator of pressed key!! However it has conflict with builtin phonepad, either one of them or both will fails to load. To solve this issue.
1. Use sktool =>> Maintenance =>> Services =>> disable the "IntelliPadService", set it to "manual" too.
2. Use sktool =>> Maintenance =>> Window startup =>> click and hold on "PlumStart6.exe" =>> goto "order" =>> select "up" (repeat till its the highest)
***Notes please install only 1 chinese SIP.

---

BTW...thanks for this info. I'm a non-native Chinese speaker in China and just bought the Atom. This is great stuff. Now... any input methods for WWE that let you write (by hand) Chinese character? My writing is poor, but it would help me use my dictionary better.

---

Dear folks,
May I ask how to add the registry into the phone?
Totally clueless... thanks in advance!
Also, thanks for the sharing!

---

isn't it copy sunfon.ac3 to window , then open the frontlink_sunfon.ac3.reg ?
i try it , but cannot work ~ pls gv me some idea ~ thanks ~ !

---

@qoqosau
u will need an registry editor like resco registry and double click on the .reg i provided will do
@choon28686
Did u import the frontlink_sunfon.ac3.reg or just opening it? Did u reset your device after that?

---

Dear ckaidi,
Truly thanks for the advice.
After several testings, I do believe resco registry confronts with my rom
Hwr it works out finally...
ckaidi said:
@qoqosau
u will need an registry editor like resco registry and double click on the .reg i provided will do
@choon28686
Did u import the frontlink_sunfon.ac3.reg or just opening it? Did u reset your device after that?
Click to expand...
Click to collapse

---

SKTools registry explorer imports this without a problem. If you have trouble with Resco, download the trial SKTools and work from there.

---

so good ~! my atom with WM6 can read and write chinese already ~! really thx ckaidi and Ultimate Chicken for the guide ~! thank you 2 so much ~!

---

Import reg file
we can use Task Manager to import reg file by press left icon bar as picture

---

tube216 said:
we can use Task Manager to import reg file by press left icon bar as picture
Click to expand...
Click to collapse
This is one of those "i din know i can do that" haha
Great information shared~! Thank!!

---

Chinese Tradition Atom WM6 Final by the person who came out WM6 Chinese previously.
ATOM: http://rom.iio2.com/atom/wm6atom0925.rar
ATOM EXEC: http://rom.iio2.com/exec/wm6exec0925.rar

---

screenshot here
http://forum.xda-developers.com/showpost.php?p=1550337&postcount=225

---

Can you tell me the procedure of the chinese reading, i had follow the step by step, but it doesn't anymore , pls help ...Thank you

---

ckaidi said:
Guys,
To enable chinese writing in your device
1. Get a chinese font and put it in /windows folder
2. Create a link in registry to link the font so that system can use them
I have attached the chinese font i used with the reg file in the Chinesefont.rar
**Note that you CAN use any other chinese font, you just have to edit the .reg to link the font to your system eg. sunglobe
http://www.mediafire.com/?8xgrmyy3mdw
To enable chinese writing
i had tried many SIP and not many is working for WM6. For wm5 thats no issues except conflicts with other SIP especially PhonePad.
For WM5
I recommended you to use PlumSIP 5.0.2 as it has T9 Pinyin and T9 Eng+T9 Dictionary!! So even if PhonePad conflict and cant be used, you can still use it for T9 Eng
**Notes it lacked the auto space after selecting a word for T9 Eng.
For WM6 AKU0.3
I cant get anyother chinese SIP to install except PlumSIP5 PPC10 Beta 0615.CAB. So no choice, although theres conflict with phonepad(not included in this release). At least you can type chinese and english on this keyboard
**Notes it not T9 Pinyin nor T9 Chinese, just keyboard for both.
For WM6 AKU0.7 Beta Tester
I managed to get ZTA4_PPC2005_QVGA_SIP_v2.0.14.CAB and PhonePad (builtin the ROM) working!! Thank to Jiggs to solve the PhonePad issue!!
**Notes need to switch to ZTA4 for T9 Chinese and PhonePad for T9 Eng. Although sounded troublesome, but its working great with no conflicts switching between both of them
Click to expand...
Click to collapse
Can you tell me the procedure of the chinese reading, i had follow the step by step, but it doesn't anymore , pls help ...Thank you

---

chingvans said:
Can you tell me the procedure of the chinese reading, i had follow the step by step, but it doesn't anymore , pls help ...Thank you
Click to expand...
Click to collapse
i create a cab for u....try and see if it work anot?
check the 1st post

---

ckaidi said:
This is one of those "i din know i can do that" haha
Great information shared~! Thank!!
Click to expand...
Click to collapse
it still doesn't work, i used the the other program from another post, but it seem the program isn't not allow to write any text message, it just only the white screen and i couldn't write anythings in there

---

chingvans said:
it still doesn't work, i used the the other program from another post, but it seem the program isn't not allow to write any text message, it just only the white screen and i couldn't write anythings in there
Click to expand...
Click to collapse
hmm...are you using atom?which ROM?wat SIP did u install?

---

ckaidi said:
hmm...are you using atom?which ROM?wat SIP did u install?
Click to expand...
Click to collapse
I'm using O2 Atom Exec with WM6 AKU 0.3.0

---

chingvans said:
I'm using O2 Atom Exec with WM6 AKU 0.3.0
Click to expand...
Click to collapse
Just to be more clear before i can help.
1. Wat is the main problem you had? Read or Write?
2. If you can read Chinese now, which SIP did you install?
3. Did the SIP installed properly? Or successfully?
4. Wat you mean by blank? While trying to activate the input panel?
5. Wat other SIP and Today item did you install?
6. Interested to install the aku0.7 cos since phonepad is fixed it might fix your issue too.

---

ckaidi said:
Just to be more clear before i can help.
1. Wat is the main problem you had? Read or Write?
2. If you can read Chinese now, which SIP did you install?
3. Did the SIP installed properly? Or successfully?
4. Wat you mean by blank? While trying to activate the input panel?
5. Wat other SIP and Today item did you install?
6. Interested to install the aku0.7 cos since phonepad is fixed it might fix your issue too.
Click to expand...
Click to collapse
Thank you for your help , i already solve out the chinese reading problem , but it got one more left problem......the input layout problem , i want to use handwriting to write out the chinese letter