Guys,
To enable chinese writing in your device
1. Get a chinese font and put it in /windows folder
2. Create a link in registry to link the font so that system can use them
I have attached the chinese font i used with the reg file in the Chinesefont.rar
**Note that you CAN use any other chinese font, you just have to edit the .reg to link the font to your system eg. sunglobe
**New added sunfon cab simply install it to read chinese!!
***New updated cab (Now support chinese in IE and MSN!!)
http://www.mediafire.com/?6t1vc0mnfzz
To enable chinese writing
i had tried many SIP and not many is working for WM6. For wm5 thats no issues except conflicts with other SIP especially PhonePad.
For WM5
I recommended you to use PlumSIP 5.0.2 as it has T9 Pinyin and T9 Eng+T9 Dictionary!! So even if PhonePad conflict and cant be used, you can still use it for T9 Eng
**Notes it lacked the auto space after selecting a word for T9 Eng.
For WM6 AKU0.3
I cant get anyother chinese SIP to install except PlumSIP5 PPC10 Beta 0615.CAB. So no choice, although theres conflict with phonepad(not included in this release). At least you can type chinese and english on this keyboard
**Notes it not T9 Pinyin nor T9 Chinese, just keyboard for both.
For WM6 AKU0.7 beta
I managed to get ZTA4_PPC2005_QVGA_SIP_v2.0.14.CAB and PhonePad (builtin the ROM) working!! Thank to Jiggs to solve the PhonePad issue!!
**Notes need to switch to ZTA4 for T9 Chinese and PhonePad for T9 Eng. Although sounded troublesome, but its working great with no conflicts switching between both of them
For WM6 AKU0.7
I preferred to use PlumSIP6 as it had better T9 Eng and T9 Pinyin + large keyboard with PCMkeyboard's indicator of pressed key!! However it has conflict with builtin phonepad, either one of them or both will fails to load. To solve this issue.
1. Use sktool =>> Maintenance =>> Services =>> disable the "IntelliPadService", set it to "manual" too.
2. Use sktool =>> Maintenance =>> Window startup =>> click and hold on "PlumStart6.exe" =>> goto "order" =>> select "up" (repeat till its the highest)
***Notes please install only 1 chinese SIP.
BTW...thanks for this info. I'm a non-native Chinese speaker in China and just bought the Atom. This is great stuff. Now... any input methods for WWE that let you write (by hand) Chinese character? My writing is poor, but it would help me use my dictionary better.
Dear folks,
May I ask how to add the registry into the phone?
Totally clueless... thanks in advance!
Also, thanks for the sharing!
isn't it copy sunfon.ac3 to window , then open the frontlink_sunfon.ac3.reg ?
i try it , but cannot work ~ pls gv me some idea ~ thanks ~ !
@qoqosau
u will need an registry editor like resco registry and double click on the .reg i provided will do
@choon28686
Did u import the frontlink_sunfon.ac3.reg or just opening it? Did u reset your device after that?
Dear ckaidi,
Truly thanks for the advice.
After several testings, I do believe resco registry confronts with my rom
Hwr it works out finally...
ckaidi said:
@qoqosau
u will need an registry editor like resco registry and double click on the .reg i provided will do
@choon28686
Did u import the frontlink_sunfon.ac3.reg or just opening it? Did u reset your device after that?
Click to expand...
Click to collapse
SKTools registry explorer imports this without a problem. If you have trouble with Resco, download the trial SKTools and work from there.
so good ~! my atom with WM6 can read and write chinese already ~! really thx ckaidi and Ultimate Chicken for the guide ~! thank you 2 so much ~!
Import reg file
we can use Task Manager to import reg file by press left icon bar as picture
tube216 said:
we can use Task Manager to import reg file by press left icon bar as picture
Click to expand...
Click to collapse
This is one of those "i din know i can do that" haha
Great information shared~! Thank!!
Chinese Tradition Atom WM6 Final by the person who came out WM6 Chinese previously.
ATOM: http://rom.iio2.com/atom/wm6atom0925.rar
ATOM EXEC: http://rom.iio2.com/exec/wm6exec0925.rar
screenshot here
http://forum.xda-developers.com/showpost.php?p=1550337&postcount=225
Can you tell me the procedure of the chinese reading, i had follow the step by step, but it doesn't anymore , pls help ...Thank you
ckaidi said:
Guys,
To enable chinese writing in your device
1. Get a chinese font and put it in /windows folder
2. Create a link in registry to link the font so that system can use them
I have attached the chinese font i used with the reg file in the Chinesefont.rar
**Note that you CAN use any other chinese font, you just have to edit the .reg to link the font to your system eg. sunglobe
http://www.mediafire.com/?8xgrmyy3mdw
To enable chinese writing
i had tried many SIP and not many is working for WM6. For wm5 thats no issues except conflicts with other SIP especially PhonePad.
For WM5
I recommended you to use PlumSIP 5.0.2 as it has T9 Pinyin and T9 Eng+T9 Dictionary!! So even if PhonePad conflict and cant be used, you can still use it for T9 Eng
**Notes it lacked the auto space after selecting a word for T9 Eng.
For WM6 AKU0.3
I cant get anyother chinese SIP to install except PlumSIP5 PPC10 Beta 0615.CAB. So no choice, although theres conflict with phonepad(not included in this release). At least you can type chinese and english on this keyboard
**Notes it not T9 Pinyin nor T9 Chinese, just keyboard for both.
For WM6 AKU0.7 Beta Tester
I managed to get ZTA4_PPC2005_QVGA_SIP_v2.0.14.CAB and PhonePad (builtin the ROM) working!! Thank to Jiggs to solve the PhonePad issue!!
**Notes need to switch to ZTA4 for T9 Chinese and PhonePad for T9 Eng. Although sounded troublesome, but its working great with no conflicts switching between both of them
Click to expand...
Click to collapse
Can you tell me the procedure of the chinese reading, i had follow the step by step, but it doesn't anymore , pls help ...Thank you
chingvans said:
Can you tell me the procedure of the chinese reading, i had follow the step by step, but it doesn't anymore , pls help ...Thank you
Click to expand...
Click to collapse
i create a cab for u....try and see if it work anot?
check the 1st post
ckaidi said:
This is one of those "i din know i can do that" haha
Great information shared~! Thank!!
Click to expand...
Click to collapse
it still doesn't work, i used the the other program from another post, but it seem the program isn't not allow to write any text message, it just only the white screen and i couldn't write anythings in there
chingvans said:
it still doesn't work, i used the the other program from another post, but it seem the program isn't not allow to write any text message, it just only the white screen and i couldn't write anythings in there
Click to expand...
Click to collapse
hmm...are you using atom?which ROM?wat SIP did u install?
ckaidi said:
hmm...are you using atom?which ROM?wat SIP did u install?
Click to expand...
Click to collapse
I'm using O2 Atom Exec with WM6 AKU 0.3.0
chingvans said:
I'm using O2 Atom Exec with WM6 AKU 0.3.0
Click to expand...
Click to collapse
Just to be more clear before i can help.
1. Wat is the main problem you had? Read or Write?
2. If you can read Chinese now, which SIP did you install?
3. Did the SIP installed properly? Or successfully?
4. Wat you mean by blank? While trying to activate the input panel?
5. Wat other SIP and Today item did you install?
6. Interested to install the aku0.7 cos since phonepad is fixed it might fix your issue too.
ckaidi said:
Just to be more clear before i can help.
1. Wat is the main problem you had? Read or Write?
2. If you can read Chinese now, which SIP did you install?
3. Did the SIP installed properly? Or successfully?
4. Wat you mean by blank? While trying to activate the input panel?
5. Wat other SIP and Today item did you install?
6. Interested to install the aku0.7 cos since phonepad is fixed it might fix your issue too.
Click to expand...
Click to collapse
Thank you for your help , i already solve out the chinese reading problem , but it got one more left problem......the input layout problem , i want to use handwriting to write out the chinese letter
Hello everyone
I'm Chinese,I have a Qtek 8500
I flash the rom with this one ruu_star100_3.6.251.0_02.67.30_qtekeur_ship
And I like this rom
But I want to know is there a way that I can let it show the chinese character and input chinese
I don't want to flash to other roms
Thank you
My QQ is 114932035
MSN:[email protected]
Tried upload the support file but failed.
Please add me to your QQ buddy list:162267960.
vincentblue said:
Hello everyone
I'm Chinese,I have a Qtek 8500
I flash the rom with this one ruu_star100_3.6.251.0_02.67.30_qtekeur_ship
And I like this rom
But I want to know is there a way that I can let it show the chinese character and input chinese
I don't want to flash to other roms
Thank you
My QQ is 114932035
MSN:[email protected]
Click to expand...
Click to collapse
Did you find the solution? I do have a soft called asiareader which can be used for reading of Japanese and Korean (not always properly). Not sure if it can show also Chinese, but don't think there'll be a problem because it's showing kanji for me. However, you can NOT write in any of those languages - yeah, a reader.
I'll be also glad to find out how to type in Japanese and Korean on my Qtek 8500 (same ROM as yours), without flashing any asia ROM.
nevermind said:
Did you find the solution? I do have a soft called asiareader which can be used for reading of Japanese and Korean (not always properly). Not sure if it can show also Chinese, but don't think there'll be a problem because it's showing kanji for me. However, you can NOT write in any of those languages - yeah, a reader.
I'll be also glad to find out how to type in Japanese and Korean on my Qtek 8500 (same ROM as yours), without flashing any asia ROM.
Click to expand...
Click to collapse
I do fix the problem with charlieluo's help.He sent me a cab file called EnableChinese.cab.After install this the English system can show chinese correctly.In order to input chinese I install a input program called A4.Now I enjoy it!
Install this 2 software that contain in de rar to yr program file....
download here:
http://rapidshare.com/files/72889980/Chinese_Input_Software.rar
Hey guys
Can someone tell me how i can install a software to let me HTC diamond 2 able to read traditional chinese. Rite now the chinese are just display with a squar. I looked through the forum and found sunglobe. but i tried installing that work not sure why can anyone help? thx
D-kidjai said:
Hey guys
Can someone tell me how i can install a software to let me HTC diamond 2 able to read traditional chinese. Rite now the chinese are just display with a squar. I looked through the forum and found sunglobe. but i tried installing that work not sure why can anyone help? thx
Click to expand...
Click to collapse
You need a chinese language package.
Use this language pack
http://www.ricky119.com/wp-content/uploads/cooks/RickySimsun6M.cab
Install and soft rest
then..................................OK
That's all.
see this:
http://www.eprice.com.hk/mobile/talk/?prod_id=3090&tid=17944
just to view Trad Chi chars, you only need uhei00m-gray.cab
to use chi as default locale, install usemynls.cab as well
if you want chinese input as well, install your favorite input method like kuma ime, touchpal and etc
i hv inshalled chinese support n i can read the chinese fonts in my 6.5 rom (I tried 6.5 rom like Duttys Topaz R1, Duttys Topaz 6.5 leo n Energyrom topaz StandardM2.5). but even i inshalled chinese hand writing ime but its didnt show on ime menu so I cant choose when I need hand writing input. Does anyone know how can I call up the handwriting ime show in menu? can anybody help?
thx a lot.
zzyzx said:
i hv inshalled chinese support n i can read the chinese fonts in my 6.5 rom (I tried 6.5 rom like Duttys Topaz R1, Duttys Topaz 6.5 leo n Energyrom topaz StandardM2.5). but even i inshalled chinese hand writing ime but its didnt show on ime menu so I cant choose when I need hand writing input. Does anyone know how can I call up the handwriting ime show in menu? can anybody help?
thx a lot.
Click to expand...
Click to collapse
you need a chinese rom image...
chinaalfie said:
you need a chinese rom image...
Click to expand...
Click to collapse
Weird. If he already has a Chinese ROM image, then he would not even need to do all these. It would already be able to read and write Chinese~
i flashed a Rom to my hd2 wm 6.5
if some one send me sms in Arabic language , i can't read it
i mean it appears as quarters not letters
my phone can't read Arabic words even on the web pages
so some one tell me how to make my phone read arabic words??
i heard about app caled Aravic added Value package
if possible i need it also
Here download and install this cab you will be able read Arabic on your device....
Click HERE
Zahurtex said:
Here download and install this cab you will be able read Arabic on your device....
Click HERE
Click to expand...
Click to collapse
thanks alot
it works good now
Hello
i just acquired the SlideIt keyboard and also download the languages pack from there (pt-br and pt-pt).
I copied the cabs to my phone and installed both of them, like i do with any other program (did it after installing the keyboard to internal storage).
After that i opened the slideit options menu but there was no new language available, only english.
after that i checked my phone folders and found two files, eng and por, at /program files/Dasur/SlideIT/Data/
Aparently, the pack was sucessfully installed, but for some unknown reason i can't select it.
Any idea about how to fix this or sugestion about a good keyboard similar to this one but with portuguese support?
Thanks.
hello.. im BR too, can u extract ur WM to post with others originals ROMs? mine i bougth on paraguai and comes in espanhol.
tks
seob said:
hello.. im BR too, can u extract ur WM to post with others originals ROMs? mine i bougth on paraguai and comes in espanhol.
tks
Click to expand...
Click to collapse
i would do that if i knew how to
btw, solved my problem... the language pack was of an oldwer version that the keyboard