Hi
My Tytn is stuck at the bootscreen ( Welcome to WM6). I'm usint TNT 2.0 Rom.
my green up right light is flashing and my wifi up left light is flashing to.
i'm using spl 2.10
Pls help me and let me know ( if possible ) what to do
Thank you in advance
Have a look in here.
WB
http://wiki.xda-developers.com/index.php?pagename=HTC_Hermes
Hard Reset.
Related
Hi,
I had a WM6 Rom, pre-release, one of the Self Made available here ... I do not remember which one of the versions ...
I wanted to put the official WM6 rom, so this morning I downloaded and I tried to install it.
The installation started with my Tytn connected, the Tytn screen switched to HERM IPL-1.00 and the Red, Green, Blue, White Stripes ... and the installation continued.
Then I received a connection error from the Program ...
Now my Tytn is stuck on the "Stripes" Screen and even removing the battery and resetting ... the Stripes screen is always there ...
Any Clue ?
Thanks !
submaru said:
Hi,
I had a WM6 Rom, pre-release, one of the Self Made available here ... I do not remember which one of the versions ...
I wanted to put the official WM6 rom, so this morning I downloaded and I tried to install it.
The installation started with my Tytn connected, the Tytn screen switched to HERM IPL-1.00 and the Red, Green, Blue, White Stripes ... and the installation continued.
Then I received a connection error from the Program ...
Now my Tytn is stuck on the "Stripes" Screen and even removing the battery and resetting ... the Stripes screen is always there ...
Any Clue ?
Thanks !
Click to expand...
Click to collapse
Ok ... Classic noobing: do a search before posting ... I am looking at the "Help post for bricking" and trying the solutions, but I have to understand why bricked ...
I love this forum ...
Recovered my Tytn: I was in this case
SPL 1.01MFG
HTC_BOOT Any
Boot OS No
No GSM? No
KITL No
Diagnostic Solution: Stuck in bootloader after flash Mtty: "set 14 0" and "task 8" if doesn't help flash OS.nb again.
With those magic command, my Tytn restarted and booted !!!
Some more informations:
I have Rom WM 6.0 Custel 2.5 Version (ROM Date 04/17/07)
Radio Version 1.43.00.00
Protocol Version: 32.76.7020.19H
I tried to flash the Official HTC WM6 Italian, and you know the result ... What's worng ? Thanks
Hi,
i have a friends I-Mate JAMin (or HTC Prophet)
its a G4, now...it was running WM5, so i put HardSPL on it, went to flash a WM6.1 rom and now all it does is sit at the tri coloured screen, it seems like the HardSPL has done nothing, because the SPL is still the old numbers (the originals, it hasnt changed to 2.G4.4PDA, or whatever its suppose to show)....
I need help ASAP, i cant go back to my friend and tell him his phone is stuffed..
PLZ HELP, ANYONE....PLZ
hi,
did u try this
http://forum.xda-developers.com/showthread.php?t=353547
yep, tried that.
i actually cannot boot into a OS on the phone,
when it turns on it goes straight to the Tri-Coloured screen, i need some desperate help with this,
i have put HardSPL on there but the SPL version on the tri-coloured screen numbers have not updated to a new version,
i installed an update to the IPL version, so that has gone up to 2.20 or something like that.
the SPL number is currently 2.13.0001
i cannot get past the tri-coloured screen.
PLZ PLZ PLZ PLZ PLZ help, is the phone stuffed?
how do i fix it?
Dont Worry
If your scree show RUU and you see USB in the left corner when connecting USB - then dont worry.
Just fksh it with a NVID wm5 Prophet ROM that is available in this forum and tou will have your device back.. you can then try to upgrade it to WM6 etc
Dear All,
Please, please help me to fix the problem continues boot looping after update from AP4 to Michyprima ROM WM6.1 MULTILANG R6.1 Manila Edition (SPL 1.2 and 3.5)?
After the progress bar of flashing ROM completed, the device was started with scattered screen of RGB (like broken TV), different from the time when I was flashing AP4.
During first booting, the device always restarted after everytime I choose the font between Tahoma and Vista Font.
How can I fix this? Thanx a lot for any help!!!
=Tim=
After I've checked, I think I know the caused of problem; I was using Michy SPL 1.2 instead of SPL 3.5.
My Device is using SPL 3.5 (I know this by pressing camera button + reset button), the tri-color screen appear with text:
ATHE100
IPL-v1.00
ATHE100 MFG
SPL-v3.50. OliNex
But anyway I don't know how to fix this,
anyone please help me to restore my device again??
Many thanks in advance.
Tim
First get proper ROM.
enter bootloader using this method: To enter Bootloader press and hold the camera all the way in and press the reset button
Hook up cable and run update utility.
Finally, it works!! Many thanks to you, my Athena is now alive..
Now I'm using SPL 3.5 with Michyprima's ROM, it is fast enough to navigate.
however still, the Wifi is not working..
is that cmonex solutions fit in my case?
again many thanks to you.
Hi,
I just flashed my HTC 7500 with SPL 1.2 by installing AthenaWrapper which went through successfully. After upgradation , I flashed the ROM with SPL3.5_R6.5_B3_WM6.5_B21198.rar which also got installed successfully with no errors at all. However after installation , when the HTC was starting , it is just stuck at white screen and does not go ahead at all. I have tried all things including hard reset , but the phone does not come out of the white screen.
Can someone please help URGENTLY ? have I missed something during the installation ? How can I get the unit to boot atleast . In the bootloader screen , the SPL does show as 1.2.
Kindly help please ???
Thank you.
superlifer said:
Hi,
I just flashed my HTC 7500 with SPL 1.2 by installing AthenaWrapper which went through successfully. After upgradation , I flashed the ROM with SPL3.5_R6.5_B3_WM6.5_B21198.rar which also got installed successfully with no errors at all. However after installation , when the HTC was starting , it is just stuck at white screen and does not go ahead at all. I have tried all things including hard reset , but the phone does not come out of the white screen.
Can someone please help URGENTLY ? have I missed something during the installation ? How can I get the unit to boot atleast . In the bootloader screen , the SPL does show as 1.2.
Kindly help please ???
Thank you.
Click to expand...
Click to collapse
Hi there,
You have answered your own question. you up graded to spl1.2 and then flashed with an spl3.5 rom. you should have flashed an spl 1.2 rom. To use an spl 3.5 rom you need to upgrade again with AP4.0 rom that has the upgrade built in. there is no other way of doing it.
Now you will have to fix your athena with THIS HELPread from post 33onwards, and please read the athena WIKI.
Best of luck
Jay
Hello Jay,
Thanks for your quick reply. How do I get the Athena connected to my PC now ? I can't connect it through Activesync as it does not boot and is in white screen. Also I tried to put it in boot loader mode and then run the updater.exe but it displays a 'Timeout message ' whether the device is coonected and that Active sync is running ?
Can I install 1.2 ROM if that's possible ? If yes , can you let me know which ROM with SPL 1.2 ver can work ? I am just worried now as my Athena may be completely dead and I can't use it.
Can you help ? Thanks once again.
Hi Jay , Folks,
I am writing the codes that I see when I put Athena in bootloader mode :
[email protected])
IPL-v1.00
[email protected]$)
SPL-v1.20.Olipro
From this info , can it be fixed ? Please help
Thanks
Hi superlifer
welcome to the joys of flashing!
Jay has given you a solution to your problem.
Guess what!
You are not the first person to make the mistake you have made and it is documented in several places.
Jay pointed you to the specific post that will fix your problem but he also mentioned you should read the wiki.
i will add to this that you should also read the sticky threads at the top of this forum which include "the beginners guide to upgrading the ROM"
and another thread titled "How to FIX INVALID MODEL ID after bad flashing"
You have corrupted the radio by trying to flash an SPL3.5 ROM onto a phone formatted for SPL1.2.
These roms are different sizes and it wont fit, leading to the unintended consequence.
As I said in the beginners guide , you can flash from bootloader(the 3 coloured screen"
I hope all new owners read this thread and the others I mentioned as it will help prevent the angst you are feeling.
regards lakeman
Hello Jay, Lakeman, Cmonex,
Absolutely brilliant !!
My Athena is breathing again and is out of the dead white screen. I followed the steps to fix the model id and wifi (from CMonex ) and was able to overwrite the model id successfully. I then flashed it with ROM WM6.1 MULTILANG R6.1 MiChY which also got installed successfully. On bootloader screen it now shows as:
ATHE100
IPL-v1.00
ATHE100
SPL-v1.20.Olipro
Many thanks first of all to you all and your timely reponses and perfect guidance.
I just want to know now which is the best stable SPL1.2 ROM now which i can install. I want to install 1.2 ROM with HTC Plugin and the big Digital clock and also which will have GPS. My previous ROM had QuickGPS which doesn't seem to be there now and is there way I could get it back. How can I use GPS on Athena.
Apologies as this device is completely new to me i am still getting used to its functions by reading lot of articles and WIKI for this model.
I am scared to put SPL3.5 as I might break something again. My donation is on its way.
Cheers
Just update to the 3.5 spl much much easier that way instead of waiting for anyone to backport their stuff to the 1.2 spl
hi guys today i start updating my the rom on my x7500 i made it to the third step where there were a progres bar untill it goes 91% where it stuck for a while and the program infome me that there was an error and i had to take the usb off romove the battery for 3 seconds and then start the device and i do it but when i turn the phone on i recive a black screen with some white lins on the top and some red letters on the bottom and after 2 seconds i turn grey and the programm dident see the htc so it closed. can i fix it now and how thanksssss
note: that i can stiil get the red green blue wite screen by pressisng the camera button and resset so i start all over again untill the progress bar get to the 5 i think and it get me a messaga tha this programme cant used for this devise
Hi and welcome to the forum,
What does it say on the bootloader screen (Reset/ camera button) and which rom are you trying to load? sounds to me youre trying to load a rom with the wrong spl.
Regards
Jay
hi my friend and thanks for the response in the boot loader screen it says
IPL-V1.00
SPL-V1.20.OLIPRO
and i've try to to put the 13th of this list http://forum.xda-developers.com/showthread.php?t=397518 which is this one http://forum.xda-developers.com/showthread.php?t=411371
Hi,
Now im not sure still what rom it is you are trying to use, it would be better if you just gave me the name on the download link. So go through the start of downloading it again and copy the name of the link. I think you are trying to flash a SPL 3.5 rom onto an SPL 1.20 Athena (yours!). any how, do that and let me know. If you think you are going to use 6.5 roms that are around now then you will need to first flash with the AP 4.0 rom first, however you need to have a working rom on your athena first. so i would recomend you flash with AP 3.0 OR go back to a stock rom and start again. AP 4.0 swaps your SPL to 3.5, but it will swap back to SPL 1.2 if you want to.
Jay
thanks again my friend the broblem solved by following the steps on this link (the second post) http://forum.xda-developers.com/showthread.php?t=387454&highlight=mtty&page=4 but the broblem came becuse in the ist of roms says windows mobile 6.1 and spl 3.5 and spl 1.2 and inside the lin is says wm 6.5 and spl only 3.5 now i manage to put one but i will try to upgrate to spl 3.5 in order to get the rom i want one more time thanks responderman for the respone
Not a problem, glad you are sorted out now. Just be very careful if you upgrade to SPL 3.5, read the guide in full and follow it to the letter.
Regards
Jay
does someone knows how to update from spl 1.20 olipro to spl 3.5 on order to put an other rom for spl 3.5
follow instructions here
http://forum.xda-developers.com/showthread.php?t=429013