Help! SB X01HT Internet not working... please someone! - 8525, TyTN, MDA Vario II, JasJam Software Upgradin

Hi guys,
I've spent the last few days reading most of the posts on this forum. Thank you everyone for sharing your solutions.
I purchased a X01HT last week. The back says May 2007 batch.
This is what I did:
-I followed Pof's instructions to Unlock the phone. And I got all success msgs.
But I am confused b/c i read somewhere that there is still a SB sim lock b/c it doesn't detect a SB sim. So i have to do something else to fully unlock it?
-edited the ExtROM with Pof's instruction as well
-I flashed it to the newest HTC english ROM available on this site.
-Hard reset
-Used Htweak to unhide the ExtROM. it wouldn't let me delete those files... but installed the Softbank extROM files one by one according to the order on the config.txt
After the last step, the internet was working fine for like 10 minutes. Now it dosen't work, I keep getting the error msg "Cannot Connect. Dialed open.softbank.ne.jp The answering modem has disconnected....."
I can't get it to work again....
I have one more question. Softbank didn't give me an email address, so how am i suppose to email other people from other companies?
I am new to Japan, and somewhat of a phone enthusiast. If someone can help me out.. it would be great. thanks!

Are you sure you have followed this thread:
http://forum.xda-developers.com/showthread.php?t=301952?
Is the phone part working?
Which is the radio version and bootloader you have now???
About Softbank email you need to create your account in MySoftbank website:
https://mb.softbank.jp/scripts/japanese/mysoftbank/index.jsp
Then click in オリジナルメール設定 (Original Mail Settings) and a popup appears. You must insert your phone number and the password you received from softbank in your first SMS. If you lost that message you have to ask them again...
You need to create also a MySoftbank web account (everything in Japanese to check your bill and update optional services.
You are "very brave" to try everything without checking first the basic Softbank setup...

neocsr said:
Are you sure you have followed this thread:
http://forum.xda-developers.com/showthread.php?t=301952?
Is the phone part working?
Which is the radio version and bootloader you have now???
About Softbank email you need to create your account in MySoftbank website:
https://mb.softbank.jp/scripts/japanese/mysoftbank/index.jsp
Then click in オリジナルメール設定 (Original Mail Settings) and a popup appears. You must insert your phone number and the password you received from softbank in your first SMS. If you lost that message you have to ask them again...
You need to create also a MySoftbank web account (everything in Japanese to check your bill and update optional services.
You are "very brave" to try everything without checking first the basic Softbank setup...
Click to expand...
Click to collapse
Yeah I followed the thread. I put my SIM from Hong Kong in the phone... and it doesn't seem to have any error msgs.
How do i check my radio version and bootloader? (sorry, im new to hermes)
My phone part works. I can txt other softbank ppl, but i guess not other companies.
The internet was working... it downloaded my hotmail inbox once.. and now that error msg won't stop.
I left the phone on in japanese... for a good hr before i flashed it... I didn't get a text. I guess i have to call them. Do i just set up the mail account in Outlook after i get everything?
Thanks in advance for the help.

For your internet connection try with this:
http://forum.xda-developers.com/showthread.php?t=298031&highlight=softbank+proxy
To use your softbank email, you need to install one application from softbank (but it is crap). I recommend instead MMS Lite... it is somewhere in the forum.
If you don't know the radio version... how do you know what you did was right???!!!

hey man, thanks. i think it working now.... now there's a 3G symbol on top of the signal strength bar. i hope it keeps working
i have spl 1.4. i did that 2 button thing... i kind of don't know what im doing as you can tell....
the connection looks the same as before open.softbank.ne.jp .. but it works now. thanks!

quiksilver_blue said:
hey man, thanks. i think it working now.... now there's a 3G symbol on top of the signal strength bar. i hope it keeps working
i have spl 1.4. i did that 2 button thing... i kind of don't know what im doing as you can tell....
the connection looks the same as before open.softbank.ne.jp .. but it works now. thanks!
Click to expand...
Click to collapse
just letting you know that you can't send SMS to other carriers here in Japan. Only to other Softbank phones. If you want to, you have to send a MMS to the likes of DoCoMo or AU.
I gave up on it as its too hard to get working right!

Related

Please Help. Orange Sim in O2 Xda, not allowing text messages

Hi, I have recently bought a Sim unlocked O2 XDA Mini S. I am on Orange network and put my sim in. Making and receiving calls no problem.
It wont allow me to send or receive text messages. I called Orange to replace Sim and they wont do it. I am absolutely clueless about ROM s or IMEI s etc. and i would appreciate help and explanations as though i am a 10 year old.
All i know is that the device is a G4. I have tried searching forums but have no idea where to find it.
Please help as it is getting really frustrating.
Thanks
I might be wrong here but I had a similar issue, I think it is a case of setting the device so that SMS is the default mail application. I forget where in the settings this is but will look later this evening if you havent found.
Hi, Thanks for that. I have tried to change settings but it won't allow me to do so. I get a message saying "phone not ready, try again in 15 seconds"
JakeyT said:
Hi, Thanks for that. I have tried to change settings but it won't allow me to do so. I get a message saying "phone not ready, try again in 15 seconds"
Click to expand...
Click to collapse
I had this same exact problem/message once. I had an orange sim which came with the SPV M700 (trinity) hence it was a 3G sim card. Tried using it with a SPV M600 (prophet) and it kept throwing up that message. Using other sim cards and the M600 would work perfectly. The problem was the sim card and Orange UK will not change it to a 2G card even over their dead bodies!!! Only solution was to go back to a 3G-enabled phone (which I did for a while) or change network which I did eventually (T-Mob - lots of free calls on Flext 35 )
has anyone found a way round this yet?

Please i really need your help, i'm getting tired...

Please people i need your help and yours knowledge... I'm really tired of not receive all sms's!
I'm a busyness man, and i for my work i need sms... So i really need your help... i have installed all the roms and all the radios on my pda... an whats up with my pda? They dont receive all the sms... I have installed batary plugin to count the sms's and i note i'm not receiving some sms's some sms's stay by the way.... But the most interessant is when i conect the pda to pc, and i conect jeyo mobile, i receive all sms's... This is really strange.... so whats is the big problem? Please, can you help-me please? :/ Any software to resolve this? :/ I really apreciate your help!
P4k1t0 said:
Please people i need your help and yours knowledge... I'm really tired of not receive all sms's!
I'm a busyness man, and i for my work i need sms... So i really need your help... i have installed all the roms and all the radios on my pda... an whats up with my pda? They dont receive all the sms... I have installed batary plugin to count the sms's and i note i'm not receiving some sms's some sms's stay by the way.... But the most interessant is when i conect the pda to pc, and i conect jeyo mobile, i receive all sms's... This is really strange.... so whats is the big problem? Please, can you help-me please? :/ Any software to resolve this? :/ I really apreciate your help!
Click to expand...
Click to collapse
Dear P4k1t0
in order to be helped by the power in this forum.... you need to make precise pin-outs,
1. Which rom are you using?
2. make a manual hard reset after fresh wm6 upgrade already?
3. same situation when the Prophet is being newly use?( no 3rd party softwares)
4. radio rom version?
5. where are you?
In my own opinion, check your softwares and contact your TSP (Teleservice Service
Provider),
Actually, I am currently using Korand 3.1 with no problem at all, and many of the rest WM6
roms here I had tried and never like that before ( twice serious delay in receiving SMS and
had been proved that the mistake from the Teleservice-Provider.)
Good Luck and enjoy the warmth here... ^_^
Do you have that issue with tiagofa PT Qtek rom?
Hi first of all thnks for your replay
1. I'm using micro v2 Edited by myself!
2. Yes i have do it.
3. Yes... I have tried with some apps on... and with all apps off. With a hard reset to, and i have not receveing sms's
4. Radio .69.
5. i´m from portugal
So, did you think if i use korand 3.1 is better for that? I will try it
dioxda2 said:
Dear P4k1t0
in order to be helped by the power in this forum.... you need to make precise pin-outs,
1. Which rom are you using?
2. make a manual hard reset after fresh wm6 upgrade already?
3. same situation when the Prophet is being newly use?( no 3rd party softwares)
4. radio rom version?
5. where are you?
In my own opinion, check your softwares and contact your TSP (Teleservice Service
Provider),
Actually, I am currently using Korand 3.1 with no problem at all, and many of the rest WM6
roms here I had tried and never like that before ( twice serious delay in receiving SMS and
had been proved that the mistake from the Teleservice-Provider.)
Good Luck and enjoy the warmth here... ^_^
Click to expand...
Click to collapse
kram3r said:
Do you have that issue with tiagofa PT Qtek rom?
Click to expand...
Click to collapse
yes, i have tried the official pt qtek rom :/ But with no diference in sms's
Hi,
Your problem sounds more like a possible network issue rather than anything to do with your pda. Can you try your sim in an ordinary gsm handset, nokia, sony ericsson etc just for a few hours to see if it improves your service?
Check with your servoce provider and they can check the BTS in your area.
Hope this helps
Rivendell63 said:
Hi,
Your problem sounds more like a possible network issue rather than anything to do with your pda. Can you try your sim in an ordinary gsm handset, nokia, sony ericsson etc just for a few hours to see if it improves your service?
Check with your servoce provider and they can check the BTS in your area.
Hope this helps
Click to expand...
Click to collapse
Some days ago... i have tried this sim card on a nokia, for a day, and i have received all the sms's :/ So what did you think are hapening here? :/
And i think the problem is on the phone, because when is conected to pc, to jeyo mobile, i receive all the sms's! :/ ????
Do you get the text message if you send one to yourself ?
Are you still getting voice calls thru without problem ?
When you send a text does this prompt the downloading of any sitting on the network ?
Is you PDA set for manual network selection or automatic ...? If auto, then change to manual.
Do you stay within the same area or do you travel around (30K radius) during the day ?
Is Jeyo Mobile your service provider ? What network do you use normally ?
Rivendell63 said:
Do you get the text message if you send one to yourself ?
Are you still getting voice calls thru without problem ?
When you send a text does this prompt the downloading of any sitting on the network ?
Is you PDA set for manual network selection or automatic ...? If auto, then change to manual.
Do you stay within the same area or do you travel around (30K radius) during the day ?
Click to expand...
Click to collapse
Yes i get a text message if i sent to me!
No problem with voice calls!
'When you send a text does this prompt the downloading of any sitting on the network ?' I dont have understood that question :s
Hun... ok ok i have changed to manual Lets see if i have any diference
I do the two thinks Stay on area or travel around!
If you haven't had any texts thru for a while and you then send a text, do you then receive texts or not ?
Rivendell63 said:
If you haven't had any texts thru for a while and you then send a text, do you then receive texts or not ?
Click to expand...
Click to collapse
I have tried that, sometimes works... but not allways... like 10% :/ This is really a dificult situation :S
Did you think if i install Arcsoft MMS i will get something for this problem?
Ask your service provider to send you a sim update.
Do you have another sim card to use in your PDA ?
Rivendell63 said:
Ask your service provider to send you a sim update.
Do you have another sim card to use in your PDA ?
Click to expand...
Click to collapse
Yes i have!... What is your ideia?
Arcsoft MMS should'nt make any difference as MMS are dealt with differently by the network.
Hve you tried switching to airplane/offline mode for several minutes and then back on again? If you try this do you then get texts thru ?
Check with your service provider for downgraded transmitters in your area or where you know you'll be using the phone during the coming days
Try using a different sim in your phone and see if it gets the same problems.
Sim update from service provider should refresh settings on the phone etc.
I'm not convinced your phone is the problem as there are lots of network related issues that can delay messages being delivered thru to your phone.
Do the messages come from any particular network ?
Time of day, possible network congestion in the area. Check with your provider and ask them to check the coverage for you.
Rivendell63 said:
Arcsoft MMS should'nt make any difference as MMS are dealt with differently by the network.
Hve you tried switching to airplane/offline mode for several minutes and then back on again? If you try this do you then get texts thru ?
Check with your service provider for downgraded transmitters in your area or where you know you'll be using the phone during the coming days
Click to expand...
Click to collapse
Hun... i dont have tried that at all! But i will try and tomorrow i will come back with some news! thanks for your time and disponibilitie And sorry my bad english! x) I'm portuguese!
don't worry bout it... you english is way way better than my portuguese ... I'll check back tomorrow evening if I get the chance.
I think, if you are businessman, you should stay with factory-software and support ... if you should get issues, like now.

Radio 1.14.25.35 from official FUZE ROM Breaking MMS

Is it just me or is anyone experiencing a "Forbidden" error when sending/receiving MMS after updating to AT&T's new ROM with 1.14.25.35 Radio?
I've reflashed the updated AT&T ROM and then flashed NRG's latest 6.5 ROM with the correct Rilphone.dll and still have the Error. I even tried sending from the new stock ROM and got the error. I did this multiple times to make sure it wasn't a bad flash and still have the "Forbidden" error. Did I do something wrong when I flashed the new ROM and Radio? The settings in MMS are correct and I didn't load anything else prior to testing MMS.
At first I thought it was AT&T and wasted over 30 minutes with a rep that knew next to nothing. Then it dawned on me that this all started after I updated to the new ROM/Radio release for AT&T on HTC's website. So, I reverted back to the original shipped ROM with 1.02.25.32 Radio, flashed NRG's latest 6.5 ROM and can now send/receive MMS.
I had the same forbidden error and had to talk to tech support from att.. apparently it's because i had placed my sim into an iphone and we all know iphones can't send mms so it registered into their system that i was using an iphone thereby causing the iphones imei to register to my number hence why it's forbidden to send/receive a mms. did you perhaps do something similar?
ATT0001 file can't open it
Hey Guys... sorry than I can't help to solve your problem.. But i have a problem too with the MMS... what happens is that every time I send or receive a mms to a windows mobile phone comes as ATT0001 file and I can not open .. I need help with this thanks
Loner2DEnd: I did but only to unlock one. I've done this before and have never had that problem up. I only noticed that I wasn't able to send/receive MMS after I had the official update from HTC for the FUZE. I was on the phone with the tech and they told me that using my SIM in an iPhone wouldn't have updated my account. You can log onto your online account with AT&T and see what phone/IMEI is registered with your account. Mine still has my FUZE and correct IMEI. Everything is working now that I reflashed the original shipped ROM with the 1.02.25.32 Radio.
I downloaded another copy of the ROM update from HTC for the FUZE and ran the same tests to see if maybe it was a corrupted file/bad flash and I still had the same issues with MMS. My internet still worked but I got the same Forbidden Error. For now, I'm going to just stay with my current (original shipped) Radio since everything's working.
Dannyedilber: I'm not familiar with that Error. Sorry man. I don't know much about MMS and had to do some homework and some trial and error to finally find this solution. Maybe one of the seniors can answer your question.
I've had this problem a few times but usually fixes itself after a reset or a quick disconnect/reconnect of the radio.
I find that if I leave my data on for an extended period of time, it seems to happen. Almost like AT&T is seeing the high traffic and cutting me off.
Also check to make sure you guys don't have Data disabled in your accounts.
@Dannyedilber: I don't even know what an "ATT0001" file is?
@Loner2DEnd: My wife just returned her iPhone because she said it sucks compared to Windows Mobile (smart girl eh?) and went back to her old Samsung Blackjack. We did this yesterday, after her having the iPhone for a little under 30 days. I just sent her a picture and she got it.
From AT&T
The data network works for all of our devices and the Windows Mobile devices are the only ones that seem to have had some issues with the way the data network is configured. Rather than trying to re-configure and potentially break the network for other users, we have been working on a fix for the Windows Mobile issue. We have a fix that will be implemented by the end of this quarter and we should have the problem resolved at that time.
Click to expand...
Click to collapse
From AT&T
Just wanted to let you know that I did get an update. The project to "fix" the 403 error is moving forward. Right now we plan to have the implementation complete in June with Project closure in Early July. I will follow up again in about a month to see the status and provide closure information.
Just for clarification: This project hasn't slipped a month, we keep the project open during a "soak" period to ensure that everything is going as expected. Also, as we apply the fix to the elements in the network the fix will be applied to certain markets and complaints should drop for that market dramatically. I haven't seen this issue in a while here so I believe that the patch has been applied for the Minneapolis market.
Click to expand...
Click to collapse
An easy temporary fix is to put your phone into flight mode and then take it out. A new data connection almost always works. Worst case scenario soft reset the phone.
so its by market then?
I flashed the new rom about last week, had no issues receiving and sending MMS on it and on NATF's 4.7 rom.
Still No MMS
nmbr6 said:
...An easy temporary fix is to put your phone into flight mode and then take it out. A new data connection almost always works. Worst case scenario soft reset the phone.
Click to expand...
Click to collapse
My MMS is not working incoming or outgoing. I have tried it from TF3D2, Titanium, after reset, after airplane mode and reset with no success. I put my SIM card in my backup phone and MMS send and receive worked flawlessly. I do not get the forbidden error message some of you have gotten; it just does not work. I have reset the RegEdit keys several times and they are currently set at 1.2mb. I know that 6oo K is at&t max, but the two test MMS messages are 77K and 317k. Thanks - David.
Black C5 said:
My MMS is not working incoming or outgoing. I have tried it from TF3D2, Titanium, after reset, after airplane mode and reset with no success. I put my SIM card in my backup phone and MMS send and receive worked flawlessly. I do not get the forbidden error message some of you have gotten; it just does not work. I have reset the RegEdit keys several times and they are currently set at 1.2mb. I know that 6oo K is at&t max, but the two test MMS messages are 77K and 317k. Thanks - David.
Click to expand...
Click to collapse
It sounds like you have a different issue altogether. My posts were answers from AT&T strictly for the 403 forbidden issue.
Player911 sorry that I was not very specific...whats happening is when I send a ATT MMS to someone who have a HTC touch pro to her hotmail account.. she can't open it because the picture come as ATT0001.. even when I send att MMS to myself at my email account I receive as a ATT0001
Need help with this guys.. please
Sorry my english
Hi All:
First off thank you for the info in resolving this issue. Since swithing back to the original shipped ROM with radio 1.02.25.32 then flashing EnergyROM 3.0 Phoenix 6/12, I've had no problems with MMS Forbidden Error. It's been a week now and I've had no data/network issues either. I'll try again with the new Radio/ROM this weekend when I have some free time and will report back. Thanks everyone!
Tru using a registry editor and go in and change the registry in Arcsoft under HKLM>Software>Arcsoft>Arcsoft MMS UA>Config>MM1>MMSCSetting>SampleMMSC>Wap1SendDefault and Wap2SendDefault and change to a desired number. For instance, I have 102400 set to send up to 1MB.
See if that allows you to send.
try enabling ATT's proxy. This always works for me.
1. Enable the proxy
2. Kill the data connection
3. Reconnect data
4. Try sending or receiving.
This has worked countless times for me.

On Rogers with SMS time problem..

Hey all, i originally posted this problem in January, still no fix.
Wondering if any of the new folks to the forum have any suggestions.
I am using an unlocked TG01 from Orange (UK) on Rogers in Canada (GMT -5), using the official 6.5 ROM. CE OS 5.2.21840 (Build 21840.5.0.60)
My SMS messages recieved are logged 5 hours behind current time. My SMS messages sent are logged at the current time. My suspicion is that it has to do with the origin of the phone, from the UK.
I have searched xda forums and modaco forums, microsoft, and google.
I have total commander, and have modified the registry in a few was, as described below:
I have added the TrustTimeZoneField field dword (in HKLM\System\Phone Settings\OEM ... or whatever it was.)
I have modifed HKLM\Time Zones to include Eastern Standard Time with the proper TZI file.
I have tried to set the timezone to another setting (like GMT -3) reset the phone, and then change it back, and it doesn't not work.
I have download a cab file that was supposed to fix it too.
I am looking for any other ideas, please, and thanks.
Rogers Canada Connections Settings
I followed rogers settings I found on from another site , but although I managed to get the sms working, MMS is still ignoring me. I also cannot connect to the internet/skype using 3G, only wifi, which is quite annoying.
Anyhow, give this a try and see where you get. I found that the Toshiba framework doesn't allow you to add all of these settings, so that might be part of the problem. Anyone have a .cab that might allow for a more comprehensive wifi/3G settings input?
Settings: I followed this from another site , but although I managed to get the sms working, MMS is still ignoring me. I also cannot connect to the internet/skype using 3G, only wifi, which is quite annoying.
Anyhow, give this a try and see where you get. I found that the Toshiba framework doesn't allow you to add all of these settings, so that might be part of the problem. Anyone have a .cab that might allow for a more comprehensive wifi/3G settings input?
source site:modmymoto, forums, thread 17207
Could you provide a direct link to that thread? I'm not able to find it.
ya i got the same problem but with the topaz
Anyone out there got a "new" fix?
Rogers settings
Hi, I can't remember where i found this, but here is a .cab file for rogers EDGE, and sms settings. Works easy for hard resets.
that_dood said:
Hi, I can't remember where i found this, but here is a .cab file for rogers EDGE, and sms settings. Works easy for hard resets.
Click to expand...
Click to collapse
Thanks for the reply. I applied the cab, soft reset, test SMS has the same problem. Time sent 2:16am, time recieved 10:16pm
Bump...........
mms
Did you ever get your mms working?? I got mine going with this http://www.stephenwagner.com/?p=33

X10 2.1 sms issue

Hey all,
Just wondering whether its me or not, but ever since the update if I type a text longer than '1 message(+9) '(weird but cool feature if I must say) my phone will Not send the message no matter what..and as long as I have it under that character limit it works fine...
I'm in australia and with Optus, and I work for them as well so I know it isn't my sim or my account :/
Anybody else had this issue? Because I know currently the samsung galaxy S(2.1) is having compatability issues with texting, but I wouldn't imagine it'd be the same cause...
- Shalz
Sent from my X10i using XDA App
I just did a test text and it worked fine.. 2 messages sent no problems.. (UK Vodafone).. World Generic 2.1 firmware.
just wondering did you update to the optus 2.1 or the generic?
I have a feeling i must be on the generic firmware because i did have 1.6 Rooted prev. to the update
I asked the guys at work about the update today and none of them so far have been able to update...even though i downloaded the Australasian PC Companion.
but even picture messages and everything else works perfectly fine...its just that one thing =/
I have the exact same issue, it happened to me also on 1.6 bu that was more generous and gave me 2 message lengths before it would fail to send. its strange as the first couple of messages i sent on the nordic 2.1 update where fine and they were well over 2 message lengths and then suddenly if i try to send one over 1 message length it fails!!! weird
would love to find the reason to this
Someone found any solution FOR THIS??? Help
It's saying "Could not send" for me, but is actually sending the first 160 characters of the message
Edited to add: I'm on UK Vodafone with the Global Generic 2.1 firmware.
Further edit: I'm able to send long sms to myself, just not my intended recipient...? She's on O2, could this be why?
Even more edit: Just tried sending to someone else and they didn't receive anything?! Very inconsistent!
sms Issue
Hi,
I have the same issue with my sms, it will not send more than 1 message otherwise the text bounce back saying message not sent, I just upgraded to 2.1 Nordic. The problem did exist when i was on the 1.6 but then the message will not send only if it was more than 2 messages, I am on vodafone uk, my phone was not debranded whilst running 1.6.
Any help will be greatly appreciated.
zerro2hero said:
Hi,
I have the same issue with my sms, it will not send more than 1 message otherwise the text bounce back saying message not sent, I just upgraded to 2.1 Nordic. The problem did exist when i was on the 1.6 but then the message will not send only if it was more than 2 messages, I am on vodafone uk, my phone was not debranded whilst running 1.6.
Any help will be greatly appreciated.
Click to expand...
Click to collapse
I still haven't found a solution to this, interesting that you're also on UK Vodafone though, maybe it's something to do with them rather than the firmware?
has anyone found solution to this I have Rogers X10a and Telus sim card in it. Can't send sms if its longer than 160 charecters . Please help
I'm having the same problem as well. Any message over 160 characters and it won't send. This has actually resulted in my not being able to send shorter messages after trying to send a message that is over 160 characters. Not sure what is going on here or if there is a setting that can be changed for this.
I'm in the U.S. on AT&T. Used the xda flash to global and rogers and neither would send an sms message over 160 I guess? (it's 2 sms) Did a global firmware to 1.6 and then updated to x10a 2.1 via sony and then tried and it still would not send. It will send through GSM however using the edge network. It must have something to do with the h network then and no I don't get 3g to pop up at the top of the screen ever..
I'm not too sure what the problem is here but it is the only one I am having on my phone, everything else is working great!...
If anyone can help us all out with any ideas or suggestions it would be great but as of now it sounds like it's a problem with the new software from sony. Gonna try messing with the sms apn a bit and see if I come up with anything but as of now 2.1 sms is considered broken in my opinion.:/
im having the same problem. im using chompsms and at the botton, instead of saying 160 char it says 70 and wont send more than two texts long. If the network is changed to GSM only, any size text will send but then internet is slow unless its changed back. AT&T settings were found automatically but they are all correct.
my SE Xperia X10 on 2.1 wont send messages at all. no matter the size. ive tried to send messages like "Hey" or "No" and they dont send. Im with in Canada, with Rogers. And its not my signal because i have 4 bars...
-Thanks
Hi All,
Just wanted to let you know we had this posted on our forum also at talk(dot)sonyericsson(dot)com and I've sent it off to the correct team to find us a solution, or at least get a comment from them. I'll update you all here when I have more info.
-Jeff
Sony Ericsson Answers Team
Jeff-SEAnswers said:
Hi All,
Just wanted to let you know we had this posted on our forum also at talk(dot)sonyericsson(dot)com and I've sent it off to the correct team to find us a solution, or at least get a comment from them. I'll update you all here when I have more info.
-Jeff
Sony Ericsson Answers Team
Click to expand...
Click to collapse
Thanks Jeff! As I am having this issue too, awaiting for any news about it...
Hi Everyone,
I've heard back from our team today. This is not a generic problem. I will need information from your phones to pass on so I can duplicate the problem. Please PM me the following details:
Country:
Service Provider/Operator:
IMEI:
SI#: (SI is the ####-####.# on the back of the phone)
Did this happen in 1.6?:
Did it ever work on 2.1?:
I need at least 5 examples to pass to the team to move this forward. I will update you when I've collected these.
Hi all,
Ok, found a solution - try this and let us know how it goes, its worked for me!
1. Open dialer and dial: *#*#4636#*#*
2. Select Phone Information from menu
3. Scroll down to SMSC
4. Enter SMS centre number given by your service provider in this box
5. Select Update
I got a "update error" message but it still seemed to save the number, but with " and a 3 digit code after it.
If the above doesn't work, as a short term solution you caould switch to just "GSM" in your network settings and this also works - not ideal, but it's a workaround!
dubbug1971 said:
Hi all,
Ok, found a solution - try this and let us know how it goes, its worked for me!
1. Open dialer and dial: *#*#4636#*#*
2. Select Phone Information from menu
3. Scroll down to SMSC
4. Enter SMS centre number given by your service provider in this box
5. Select Update
I got a "update error" message but it still seemed to save the number, but with " and a 3 digit code after it.
If the above doesn't work, as a short term solution you caould switch to just "GSM" in your network settings and this also works - not ideal, but it's a workaround!
Click to expand...
Click to collapse
Didn't work for me, UK Vodafone.
doesn't work for Telus Canada

Categories

Resources