hi!
I'm thinking in upgrading my Prophet but I have some last questions to make before i go for it ( i don't need a new brick...)
My current version are:
Rom 2.10.7.24 PTG
Radio: 02.07.20
IPL 2.10.0001
SPL: 2.10.0001
This is a G4, right?
Flashing with one of the wm6 rom's (touch VII for example), woundn't I have problems with CID lock? (my original rom is in portuguese).
After flashing it I'll be able to downgrade to the version:
IPL: 2.10.0001
SPL: 2.20.0001
GSM: 02.47.21
OS: 2.20.7.29 PTG
EXTROM: 2.20.7.109
Thanks in advance for your patience
Note: I've read a lot of post's and the WIKI too, but i didn't get clear answers to this questions.
xkalibur said:
hi!
I'm thinking in upgrading my Prophet but I have some last questions to make before i go for it ( i don't need a new brick...)
My current version are:
Rom 2.10.7.24 PTG
Radio: 02.07.20
IPL 2.10.0001
SPL: 2.10.0001
This is a G4, right?
Flashing with one of the wm6 rom's (touch VII for example), woundn't I have problems with CID lock? (my original rom is in portuguese).
After flashing it I'll be able to downgrade to the version:
IPL: 2.10.0001
SPL: 2.20.0001
GSM: 02.47.21
OS: 2.20.7.29 PTG
EXTROM: 2.20.7.109
Thanks in advance for your patience
Note: I've read a lot of post's and the WIKI too, but i didn't get clear answers to this questions.
Click to expand...
Click to collapse
Your device is G4, your right.
About the possibility to downgrade: yes you can, but you will need a NoVendorID edition of your preferred ROM. With the update to WM6 the VendorID will get lost. If you reflash to your original ROM afterwards, the RomUpdateUtility will check for this VendorID and will not find it, so it will stop operating.
This has nothing to do with technical stuff, but everything with marketing stuff. With this method the vendors are trying to prevent that f.i. Orange customers will upgrade with T-Mobile ROM's.
It is rather simple to workaround this minor inconvinience. Just download a appropiate NVID RUU somewhere, ans exchange the nk.nsb file with your preffered ROM. Now the RUU won't check the ID and will reflash your device just as you wanted it!
Related
Hello;
I would like to return to the originel IPL /SPL for the K-jam G4, I find some originel IPL/SPL in the forum but I did not found the originel of the K-jam.
Any idea !
________________________
IPL: 2.21.0001 (G4 device)
SPL: 2.21.Olip (G4 device w/ HardSPL)
Built on Aug 26 2007 at 19:41:34
Copyright (c) 2007 Olipro & HTC - Hard-SPL
=> Firmware:
OS: 5.2.xxx (Build 19199.1.0.0) SNN WM 6.1
ROM: 2.18
Registry AKU: .1.0.0
Radio: 02.25.11
Protocol: 4.1.13.12
essultane said:
Hello;
I would like to return to the originel IPL /SPL for the K-jam G4, I find some originel IPL/SPL in the forum but I did not found the originel of the K-jam.
Any idea !
________________________
IPL: 2.21.0001 (G4 device)
SPL: 2.21.Olip (G4 device w/ HardSPL)
Built on Aug 26 2007 at 19:41:34
Copyright (c) 2007 Olipro & HTC - Hard-SPL
=> Firmware:
OS: 5.2.xxx (Build 19199.1.0.0) SNN WM 6.1
ROM: 2.18
Registry AKU: .1.0.0
Radio: 02.25.11
Protocol: 4.1.13.12
Click to expand...
Click to collapse
Just follow the method explained in the guide 'How to remove HardSPL' and you can use any Official IPL/SPL to flash back to G4 ipl/spl and download the official k-jam stock rom and flash to revert back to wm5.
OK for removing HardSPL but rom upgrade not possible.
thanks for your reply.
I succed to remove the Hard SPL but putting Vodafone IPL/SPL, the K-jam reboot after normally and showing :
IPL 2.17.0001
SPL 2.17.0001
but upgrade with originel K-jam rom is not possible.
I succed to have the The colored screen but RUU show this error ;
____________________________________________________________
ERROR [296] upgrade only the nbf can not be used for your pda phone
please get newer nbf file.
____________________________________________________________
please advise.
i want remove hardspl & want to restore original what was there!
-i read your thread How To: Remove HardSPL
http://forum.xda-developers.com/showthread.php?t=342744
-now fact is that i didnt buy kjam(wizard device) from any operator.
in india you have two type of mobile
one which are with operator (called cdma)
other which u can buy from market & insert any sim into it.
mine is 2nd device (which u can buy from market & insert any sim into it.)
-orginally hardspl was 2.16.0001
i want to restore it back it imate kjam!!!
i have downloaded rom from imate site also!!! but i tried to installed it failed as my hardspl is like:-
The IPL version 2.21.0001 and the SPL 2.21.olip
-so question is that in your post How To: Remove HardSPL do i need to download any of below said things
what should i replace in .nbf file as none of attachment belongs to be.
pls answer soon as i have only 1 week left in my waranty period of repair/replacemant!!
i cant find G4 IPL&SPL for my k-jam on that page what do i must to do????whare can iafind it please help me soon.
mp1368 said:
i cant find G4 IPL&SPL for my k-jam on that page what do i must to do????whare can iafind it please help me soon.
Click to expand...
Click to collapse
I know it's late now and this is more of a warning, but people should make IPL/SPL backup with WST before applying the HardSPL because they can be used later on to restore the phone to original condition. I have done it myself with a friend's G4.
Hello! I have a Qtek 9100 and I've managed to update to WM6.1 and now I'd prefer WM 5 witch I like more and I didn't managed to downgrade maybe someone can explain as simple as possible ... i think my phone is G4
IPL: 2.21.0001
SPL: 2.21.0lip
malexino said:
Hello! I have a Qtek 9100 and I've managed to update to WM6.1 and now I'd prefer WM 5 witch I like more and I didn't managed to downgrade maybe someone can explain as simple as possible ... i think my phone is G4
IPL: 2.21.0001
SPL: 2.21.0lip
Click to expand...
Click to collapse
First you need to remove 'HardSPL',revert back to official carrier's IPL/SPL and then flash back the official carrier's rom,follow the link below for complete guidance:-
http://forum.xda-developers.com/showthread.php?t=342744
Thanks
Thank you! I managed to downgrade ...
Hi everybody.
I'm about to upgrade my O2 XDA G4 from WM5 to WM6. I bought this neo on ebay and I don't know if it has already been HardSPled. Is there any chance to know - or - can the HardSPL procedure run again without creating problems?
Are the Radio, the IPL and SPL upgraded as well using one of the last WM6 rom or they should be upgraded manually? Do you recommend to upgrade also IPL/SPL/Radio?
Many thanks
The way to tell if it has been HardSPLed is to see the SPL number.
if it is 2.G3.4PDA or 2.G4.4PDA it has been hard SPLed if not, you will need to do it.
Generally, radio ROMs and IPL/SPL are best left alone (other than SPL for HardSPL).
Thanks for your quick quick reply. I have the following numbers:
IPL 2.15.001
SPL 2.15.001
GSM 02.30.21
OS 2.13.9.21 ITA
So I think I have a "2.G4.4PDA". BTW, while I can understand what 2.G4 means, I have no clue about 4PDA... Can you help?
Thanks again
D.
The numbers themselves (2.G4.4PDA) are meaningless... I think it is 2 (the SPL version) G4 (the device version) 4PDA (sounds like "for PDA").
You will need to HardSPL first, using G4 HardSPL as your device is a G4, then you can flash a ROM.
Done.
Thanks for your support. Now I have the following:
IPL 2.15.001
SPL 2.G4.4PDA
GSM 02.30.21
OS 2.13.9.21 ITA
Now you can flash a ROM.
Well, this is soo strange. The problem is this:
1- I upgraded to Shato Touch 1.0 (WM6) before.. Worked fine
2- I decided to upgrade to Wm6.1 - Cloudyfa Touch Edition 2.0, so i did a clean PVTemp install and now i have
IPL: 2.13.0001
SPL: 2.20.0001
Rom Version: Qtek 2.20.7.34 WWE
Radio Version: 02.47.21
Extrom: 2.20.7.114
4- Now the problem: Ive tried every tool on the forums. Every tool to Hard SPL it. Everytime it just reboots after all process, and the IPL / SPL numbers stay the same. As i figure from the forums: they should turn to 2.G4.4PDA or 2.24.opil, But they remain the same?
Please tell me what to do? I mean i really want to upgrade to 6.1, but icant fugire out what s the problem
c0d3r said:
Well, this is soo strange. The problem is this:
1- I upgraded to Shato Touch 1.0 (WM6) before.. Worked fine
2- I decided to upgrade to Wm6.1 - Cloudyfa Touch Edition 2.0, so i did a clean PVTemp install and now i have
IPL: 2.13.0001
SPL: 2.20.0001
Rom Version: Qtek 2.20.7.34 WWE
Radio Version: 02.47.21
Extrom: 2.20.7.114
4- Now the problem: Ive tried every tool on the forums. Every tool to Hard SPL it. Everytime it just reboots after all process, and the IPL / SPL numbers stay the same. As i figure from the forums: they should turn to 2.G4.4PDA or 2.24.opil, But they remain the same?
Please tell me what to do? I mean i really want to upgrade to 6.1, but icant fugire out what s the problem
Click to expand...
Click to collapse
................go for 1d, no hardspl is required.
haha! Ive been trying to hard spl for abt 1 month now.. with breaks of course, whenever i got time... but as soon as i posted it, it worked!
I ran the hardspl.bat in the Upgrade_HardSPL_G4 folder... not the nvrom setup.
ANd it worked! Its showing 2.0.G4.4pda .. and i just installed wmtouch 2.0 edition (cloudyfa ).
Well, this is a odd, but thanx a bundle Ill do the 1d method when i plan to change roms again
Wizard G4/Qtek 9100 English rom need urgent!!!
Here you go,official Qtek 9100 wwe Rom:-
http://s131209249.online.de/vodafone_software/9100.htm
Hello zabardast_1,
my phone is CID SIM locked and has no sound...
If I flash him with new ROM should the issue be fixed or on-sound is a hardware question?
Please advice,
Thank you....
Mitko
First you need to CID/SIM unlock it. Than you need to flash new rom image. Mislam deka me razbra
Borce thanks,
I have made Hard SPL on my device...
I need to make Soft SPL but I cannot find the nk.nbf file...
Can you help me somehow?
Where is that file placed or how can I generate the file?
Fala ti za odgovorot ti pisav na angliski cisto od kultura ako na nekoj mu treba informacija da mozi da ja procita ))
Pozdrav i fala uste ednas
mitko_bt said:
Borce thanks,
I have made Hard SPL on my device...
I need to make Soft SPL but I cannot find the nk.nbf file...
Can you help me somehow?
Where is that file placed or how can I generate the file?
Fala ti za odgovorot ti pisav na angliski cisto od kultura ako na nekoj mu treba informacija da mozi da ja procita ))
Pozdrav i fala uste ednas
Click to expand...
Click to collapse
If your phone is already HardSPL,there's no need to use SofSPL.simply download and flash any latest rom to upgrade,like you flash any official stock rom.
Btw,why you want to get it SoftSPL?
Because I cannot upgrade my ROM.
Below is the info form my device:
=> Bootloaders:
IPL: 2.21.0001 (G4 device)
SPL: 2.21.Olip (G4 device w/ HardSPL)
Built on Aug 26 2007 at 19:41:34
Copyright (c) 2007 Olipro & HTC - Hard-SPL
=> Firmware:
OS: 5.1.xxx (Build 14955.2.3.0)
ROM: 2.26
Registry AKU: .2.3.0
Radio: 02.25.11
Protocol: 4.1.13.12
=>Extended_ROM:
Version: 2.26.10.105
Name: Extended_ROM
Status: hidden
I downloaded the latest ROM form at T-Mobile and I'm receiving all kind of error messages : error 238 error 300.....etc
I bought the device with 2.26.10.105.
Please advice with version of ROM is the Latest.... Or why I cannot flash a new ROM
Thanks
Mitko
mitko_bt said:
Because I cannot upgrade my ROM.
Below is the info form my device:
=> Bootloaders:
IPL: 2.21.0001 (G4 device)
SPL: 2.21.Olip (G4 device w/ HardSPL)
Built on Aug 26 2007 at 19:41:34
Copyright (c) 2007 Olipro & HTC - Hard-SPL
=> Firmware:
OS: 5.1.xxx (Build 14955.2.3.0)
ROM: 2.26
Registry AKU: .2.3.0
Radio: 02.25.11
Protocol: 4.1.13.12
=>Extended_ROM:
Version: 2.26.10.105
Name: Extended_ROM
Status: hidden
I downloaded the latest ROM form at T-Mobile and I'm receiving all kind of error messages : error 238 error 300.....etc
I bought the device with 2.26.10.105.
Please advice with version of ROM is the Latest.... Or why I cannot flash a new ROM
Thanks
Mitko
Click to expand...
Click to collapse
OMG, Are you gone out of your mind,your phone is HardSPL and you are trying to flash an official T-mobile rom containing IPL/SPL in it ? its committing suicide !!!
Don't you know,its fatal flashing a rom with IPL/SPL to a device with HardSPL Bootloaders will 'Brick' the phone.
Well,if it still gets into Boot;oaders,then consider yourself as one of the luckiest human beings,as its still alive and not bricked.
While HardSPL,you can only flash custom build roms,but if you want to revert back to your official stock rom,then first remove HardSPL flash back to original official Bootloaders (IPL/SPL) and then flash the stock rom.
Or, yes you can flash the official rom through SoftSPL but first you'll have to extract the official rom,extract/remove the IPL/SPL out of it,repack the rom and then flash the nk.nbf only through SoftSPL.
BTW, 2.26.10.105. are not G4 Bootloaders,re affirm it,you might be mistaken.
zabardast_1 said:
If your phone is already HardSPL,there's no need to use SofSPL.simply download and flash any latest rom to upgrade,like you flash any official stock rom.
Btw,why you want to get it SoftSPL?
Click to expand...
Click to collapse
Please guide me thru next step. Because i forgot to backup my old rom. Thanks in advance.
avonero said:
Please guide me thru next step. Because i forgot to backup my old rom. Thanks in advance.
Click to expand...
Click to collapse
learn and follow the tutorial at http://forum.xda-developers.com/showthread.php?t=298613&highlight=button+rom
I'd also HardSpl my Qtek 9100
now have
IPL: 2.21.0001 (G4 device)
SPL: 2.21.Olip (G4 device w/ HardSPL)
but my CID still shows LOCKED!
I'm afraid not to Brick it please kindly help me in next thing to do and what type os Windows ROM version to use.
thanks in Advance.
avonero said:
I'd also HardSpl my Qtek 9100
now have
IPL: 2.21.0001 (G4 device)
SPL: 2.21.Olip (G4 device w/ HardSPL)
but my CID still shows LOCKED!
I'm afraid not to Brick it please kindly help me in next thing to do and what type os Windows ROM version to use.
thanks in Advance.
Click to expand...
Click to collapse
used WST_4.2.2 unlocked your CID