Hello everybody from Russia (Moscow).
My phone model is O2 Xda Neo (Germany)
I have used this
278638-ruu_prophet_215746_2157138_023021_qtek_rus_ship
RUU_215737_2157135_023021_QTEK_s200_RUS
and return back to original O2 Germany without problem.
But I have installed next:
RUU_Prophet_220734_2207114_024721_QtekWWE_Ship
Now I cannot install any other software. only this english version.
In install time (on 95%) I got next message
error 326: invalid command - the NBF file could not be used for your PDA phone - please check your NBF file
Boot screen has
IPL 2.15.0001
SPL 2.20.0001
The phone is ok. I can install this english version again, but I would like return to original German version or Russian.
I tried to use
pdamobiz.com_downgrade_and_unlockcid
and RUU_Prophet_2151327_21513121_021921_DOP_ASIA_WWE_Ship-NoVendorID
but it does not help.
Can you help, please?
piece of cake:
what do you need is
reCOOK the ROM using molski.biz devpack...
just be sure to remove the ipl/spl nb file after you've extract the nb.nbf file
downgrade
Hi,
I have searching for a long time and used so much tools to downgrade my Qtek S200 Pocket PC to JAMin_WWE_1000925_10009114_11420_ship.exe (SPL 1.xxx, IPL 1.xxx)
When directly run "JAMin_WWE_1000925_10009114_11420_ship.exe" I get this error: the NBF file could not be used for your PDA phone - please check your NBF file
JAMin_WWE_213923_2139123_022021_shi.exe ROM is not my solution. I need to change my IMEI. iWizard and Lokiwiz03a don't help me to change IMEI.
Can anyone help me how to do Rom Cooking for SPL 1.xxx?
http://www.molski.biz/ here the rom cooking program and it is complicated a little bit.
Hi
My phone is I-mate k-jam (kind of G4).I unlocked my phone’s CID by hard SPL program from your website . I could not install phone’s original rom. Then I installed original rom by shelltools program. My phone is not operated after hard resetting. When I switch on my phone, it stopped in three-colored page. Please be kind enough to conduct me.
You need to remove the hard spl in order to go back to the original rom
http://forum.xda-developers.com/showthread.php?t=342744
randomgoon said:
You need to remove the hard spl in order to go back to the original rom
http://forum.xda-developers.com/showthread.php?t=342744
Click to expand...
Click to collapse
START-sSPL.exe error : no device connected please help
http://www.htcamerica.net/support/8125/software-downloads.html
I ran that just fine with HardSPL installed
LancerV said:
http://www.htcamerica.net/support/8125/software-downloads.html
I ran that just fine with HardSPL installed
Click to expand...
Click to collapse
is not installed
error [294] : invalid vender id
please help
@behzad_sedat
What is the SPL version?
Invalid Vendor ID means it's not CID unlocked..
So you need the original i-mate ROM obviously. Not the HTC/Qtek ROM..
BTW.: Soft SPL doesn't work in bootloader, it needs WM 5/6 in order to load the Soft SPL.
Connect USB cable, kill wscecomm.exe (in PC's taskmanager) and start the RUU.
Forget the warning the Ruu tells you about having an active activesync connection. Flash the original iMate ROM.
the-equinoxe said:
@behzad_sedat
What is the SPL version?
Invalid Vendor ID means it's not CID unlocked..
So you need the original i-mate ROM obviously. Not the HTC/Qtek ROM..
BTW.: Soft SPL doesn't work in bootloader, it needs WM 5/6 in order to load the Soft SPL.
Connect USB cable, kill wscecomm.exe (in PC's taskmanager) and start the RUU.
Forget the warning the Ruu tells you about having an active activesync connection. Flash the original iMate ROM.
Click to expand...
Click to collapse
hi
i installed K-JAM_Arabic_2160901_21609102_20710_ship.exe
error : [296] : upgrade only
this nbf file cannot be use for your pda phone. please get newer nbf file help please please
the-equinoxe said:
@behzad_sedat
What is the SPL version?
Invalid Vendor ID means it's not CID unlocked..
So you need the original i-mate ROM obviously. Not the HTC/Qtek ROM..
BTW.: Soft SPL doesn't work in bootloader, it needs WM 5/6 in order to load the Soft SPL.
Connect USB cable, kill wscecomm.exe (in PC's taskmanager) and start the RUU.
Forget the warning the Ruu tells you about having an active activesync connection. Flash the original iMate ROM.
Click to expand...
Click to collapse
ipl : 2.17.0001
spl : 2.17.0001
behzad_sedat said:
ipl : 2.17.0001
spl : 2.17.0001
Click to expand...
Click to collapse
You haven't got Hard SPL.
So only way to flash is original ROM (in original Language it came with).
the-equinoxe said:
You haven't got Hard SPL.
So only way to flash is original ROM (in original Language it came with).
Click to expand...
Click to collapse
Dear Sir
I explain my problem more accurat. I downloaded Soft SPL accompanied by Vodafone Qtek 9100 G4 IPl&SPL.zip after reading topic of How To Remove HardSPL and according teaching I transferred nk.nbf file from Vodafone Qtek 9100 G4 IPl&SPL.zip file to Soft SPL file .Then I wanted to perform Start-sSPL.exe file but I could not perform. Then I found Soft SPL is not operated in Bootloader.Then I performed 2.exe (ROMUpdateUtility MFC Application) file in Soft SPL file accidentally. I thought it is being installed. After accomplishment I found my phone’s spl has turned from olip to 2.17.0001.So I wanted to install original ram but I couldn’t install. It is installed wm6 on my phone completely now but it is stopped in spl page. I think I could not remove my phone’s hard spl completely. Please be kind enough to help me.
behzad_sedat said:
Dear Sir
I explain my problem more accurat. I downloaded Soft SPL accompanied by Vodafone Qtek 9100 G4 IPl&SPL.zip after reading topic of How To Remove HardSPL and according teaching I transferred nk.nbf file from Vodafone Qtek 9100 G4 IPl&SPL.zip file to Soft SPL file .Then I wanted to perform Start-sSPL.exe file but I could not perform. Then I found Soft SPL is not operated in Bootloader.Then I performed 2.exe (ROMUpdateUtility MFC Application) file in Soft SPL file accidentally. I thought it is being installed. After accomplishment I found my phone’s spl has turned from olip to 2.17.0001.So I wanted to install original ram but I couldn’t install. It is installed wm6 on my phone completely now but it is stopped in spl page. I think I could not remove my phone’s hard spl completely. Please be kind enough to help me.
Click to expand...
Click to collapse
tyr the ,wizard love, rom did the trick for me
bill4676 said:
tyr the ,wizard love, rom did the trick for me
Click to expand...
Click to collapse
i cant download wizard love rom
You have requested http://rapidshare.com/files/17792050/Wizard_Love_2.26.10.2_WWE_Novii_CF2.rar (54413 KB).
You have reached the download-limit for free-users. Want to download more?
Get your own Premium-account now! Instant download-access! (Or wait 92 minutes)
lol.. Wait 92 minutes then
bill4676 said:
tyr the ,wizard love, rom did the trick for me
Click to expand...
Click to collapse
Dear Sir
I installed rom of wizard love and my phone is operated.
Thank all of you
I was trying to make upgrade from wm5 to wm6,and was looking in tutorial xda-developers > Prophet > Prophet mobile 6> New WM6 Upgrade Guide. First,I found a Upgrade_HardSPL_G4.rar, and did what was said in tutorial,copy the 3 files from the jumpspl.zip to the root directory of your Prophet and then unplug / disconnect Prophet,Execute the SPL.lnk IN THE DEVICE, then you see Prophet in all bright or white screen,Execute the ROMUpdateUtility_NV_G4 (I have a g4 device) to upgrade hardspl. I got message that my update utility was old and that I need new. Then I restarted device,just run ROMUpdateUtility_NV_G4 from the hardspl folder and instalation went smooth,pda restarted and worked well. Then I went back on xda-developers > Prophet > Prophet mobile 6> New WM6 Upgrade Guide,found this sentence: ''Step 3 and 4 are necessary only if the WM6 rom you have downloaded instead of nk.nbf has os.nb file and the ExtROM folder'', and as I downloaded wm61_korand_3_1.rar that contains only nk.nbf file,I put it in Update_Package\Update Utilities,and run ROMUpdateUtility_NV_G4 fron that folder. The instalation finished and pda booted in bootloader. After that I tried flashing Shadow My Edition 2,no DualSIM,and followed the instructions to recover pda from wiki/ prophet recovery(downloaded PDAMobiz_Prophet_WM6_V1.00_Step1),everything was the same,always bootloader. Is there a help for my prophet? Could someone give me a step by step istruction how to bring it to life? Any help is welcome. Thanks
What is the IPL/SPL displayed?
Are you sure your device is a G4?
Try a hard reset.
Try this again: http://wiki.xda-developers.com/index.php?pagename=Prophet_recovery
IPL 2.58.0001
SPL 2.58.0001
I'm sure that my device is g4. Did a hard reset and it went to bootloader again. Is there a hope? I will try http://wiki.xda-developers.com/index...ophet_recovery, but I noticed that when I run RUU and after verificatio informations on my pda it shows image version :_____________(blank),,then I click update,and then it shows
From:
image version :
To:
image version :
there is no numbers.
If you can enter bootloader, the device is recoverable.
HardSPL???
nikolah said:
I was trying to make upgrade from wm5 to wm6,and was looking in tutorial xda-developers > Prophet > Prophet mobile 6> New WM6 Upgrade Guide. First,I found a Upgrade_HardSPL_G4.rar, and did what was said in tutorial,copy the 3 files from the jumpspl.zip to the root directory of your Prophet and then unplug / disconnect Prophet,Execute the SPL.lnk IN THE DEVICE, then you see Prophet in all bright or white screen,Execute the ROMUpdateUtility_NV_G4 (I have a g4 device) to upgrade hardspl. I got message that my update utility was old and that I need new. Then I restarted device,just run ROMUpdateUtility_NV_G4 from the hardspl folder and instalation went smooth,pda restarted and worked well. Then I went back on xda-developers > Prophet > Prophet mobile 6> New WM6 Upgrade Guide,found this sentence: ''Step 3 and 4 are necessary only if the WM6 rom you have downloaded instead of nk.nbf has os.nb file and the ExtROM folder'', and as I downloaded wm61_korand_3_1.rar that contains only nk.nbf file,I put it in Update_Package\Update Utilities,and run ROMUpdateUtility_NV_G4 fron that folder. The instalation finished and pda booted in bootloader. After that I tried flashing Shadow My Edition 2,no DualSIM,and followed the instructions to recover pda from wiki/ prophet recovery(downloaded PDAMobiz_Prophet_WM6_V1.00_Step1),everything was the same,always bootloader. Is there a help for my prophet? Could someone give me a step by step istruction how to bring it to life? Any help is welcome. Thanks
Click to expand...
Click to collapse
would you mind to read me thread?
dioxda2,I read your thread. and I will now try a other hardspl that you linked there. Was that the remark you wanted me to come to my notice?
Same Issue
I face the same issue.. have tried hard reset, hardSPL and downgrading to WM5 ROM.. only the downgrade is working.. but every time I try to upgrade to WM6 it enters RGB screen.. have tried with atleast 5 WM6 ROM... any senior member to help pls.
georgexavier said:
I face the same issue.. have tried hard reset, hardSPL and downgrading to WM5 ROM.. only the downgrade is working.. but every time I try to upgrade to WM6 it enters RGB screen.. have tried with atleast 5 WM6 ROM... any senior member to help pls.
Click to expand...
Click to collapse
there are sucessful cases , please read my post or.... are you using Vista?
If so, you need other solution. (not with me ... sorry ~~ )
georgexavier said:
I face the same issue.. have tried hard reset, hardSPL and downgrading to WM5 ROM.. only the downgrade is working.. but every time I try to upgrade to WM6 it enters RGB screen.. have tried with atleast 5 WM6 ROM... any senior member to help pls.
Click to expand...
Click to collapse
What is the SPL of your device?
When recovering to WM5 you better NOT use the Mobis step 1. Any other step 1 or NVID will be fine. The Mobis ROM is too manipulated for flashing their own WM6 ROM. It will give all kinds of problems when it is used for other purposes.
I tried recovery with RUU_Prophet_220734_2207114_024721_QtekWWE_Ship.exe
and it reported error,saying that it's only for upgrade. Where to find NVID
nikolah said:
I tried recovery with RUU_Prophet_220734_2207114_024721_QtekWWE_Ship.exe
and it reported error,saying that it's only for upgrade. Where to find NVID
Click to expand...
Click to collapse
see my thread la~~~~
dioxda2,I have read your thread. This is what I know at the moment,and what I think it should be done (correct me if I make any mistake):
-my pda boots in bootloader mode
-it shows on screen IPL:2.58.0001, SPL:2.58.0001
-it's G4 model
-it has no hardspl on it
First one wild shot:
1. Download this jumpspl http://forum.xda-developers.com/showthread.php?t=329147
2.follow the instructions,and instead nk.nbf file from desired rom I put a nk.nbf file found in hardspl rar archive to the SoftSPL folder ,and hopefully flash hrdspl.
3.from bootloader flash any desired wm6 rom with RUU
Second solution:
1.download PVTemp
2.try to flash it from bootloader
3.if it's ok,then on to the next step like on your page one for old method.
Is there something else,diferent way to do this from bootloader?
Thanks for all help
In bootloader, try to flash this: ftp://xda:[email protected]/RUU_Prophet_220734_2207114_024721_NVID.exe
nikolah said:
dioxda2,I have read your thread. This is what I know at the moment,and what I think it should be done (correct me if I make any mistake):
-my pda boots in bootloader mode
-it shows on screen IPL:2.58.0001, SPL:2.58.0001
-it's G4 model
-it has no hardspl on it
First one wild shot:
1. Download this jumpspl http://forum.xda-developers.com/showthread.php?t=329147
2.follow the instructions,and instead nk.nbf file from desired rom I put a nk.nbf file found in hardspl rar archive to the SoftSPL folder ,and hopefully flash hrdspl.
3.from bootloader flash any desired wm6 rom with RUU
Second solution:
1.download PVTemp
2.try to flash it from bootloader
3.if it's ok,then on to the next step like on your page one for old method.
Is there something else,diferent way to do this from bootloader?
Thanks for all help
Click to expand...
Click to collapse
Hi there ~~~~ tell you what~~ ^_^
1. there are 2 ways to upgrade
a. " New " Method.
b. " Old" method.
2. for more update rom flashing.... better have you device hardSPL.
then you can go by 3 means to flash....
1. straight upgrade that is: connect to PC via activesync, activate RUU right ahead ( I don't like this method as sometimes will stuck @ bootloader,
2. copy the 3 files from the jumpspl to the prophet's root directory then activate manually...
3. force bootloader ( by manually buttons combination and not reboot in 3 color hang )...
then 2 and 3 is fine, ( 3 is more convenience though), you should see " USB " at the bottom prophet screen if you did things right. ^_^,
then flash...... ^_^
This is my [size=+2]little handmade tool [/size], a combination tool with Taiwan Cook - YouZii and XDA cook - Korand,
just unzip, execute the " UPGRADE.cmd " , the some on screen clicks, wait and done. !!!
Don't forget to hardSPL before so. OK?
Enjoy ~~~
A Batch flashing tool and Korands clean rom 3.1... Check it out ! ^_^
P.S. Connection Error? Please try again ~~ ^_^
nikolah said:
I tried recovery with RUU_Prophet_220734_2207114_024721_QtekWWE_Ship.exe
and it reported error,saying that it's only for upgrade. Where to find NVID
Click to expand...
Click to collapse
You will find it here:
ftp://ftp.xda-developers.com/Uploads/Prophet/Prophet-roms/
In the past I have installed a WM6 rom without having first installed on my Jamin the HardSpl G3, and accordingly pda I crashed ...
I followed the steps outlined here:
http://wiki.xda-developers.com/index.php?pagename=Prophet_recovery
to get the pda and so fortunately happened ...
I have tried in every way but since I can not install on HardSPL G3 pda I decided to return to the original rom Imate Jamin WM5...
I was now trying to reinstall the original rom on my jamin, the
JAMin_ITA_2130921_21939111_02.07.20_ship.exe
But the pda connected to the computer, with the starting procedure, the pda comes into bootloader tricolor with the following words:
IPL 2.20
SPL 2.20
RUU
USB
but after a few seconds on the computer appears the follow message:
ERROR [296] UPGRADE ONLY
This NBF file cannot be used for your pda phone, please get newer NBF file
Some of you know what it is and how can I do to reinstall the original rom?
Thanks in advance for your help
Hi
IF you want reinstall the original rom
You must
1/The battery up 50
2/ Install Prophet_PV_Temp rom into bootloader
3/Install HardSpl G3
Finally Install the original rom>>>
mmmh, bad problem
the phone refuses to "upgrade" to a lower version if it is not hardspl.
The original bootloader only accepts upgrades not downgrades.
Did u try this tool
http://forum.xda-developers.com/showthread.php?t=377904
I fear if u cannot hardspl there is no way to another rom anymore
Hi all,
My jasjam showing "no GSM" error after i upgrade it to shaps.4.22 & telestra & stain normal & Dvh-V-24 & Cic-13-
normal when those roms works about one year.I have (no gsm error & no protocol & no IMEI ) about one week.
I read many webpages in Xda-... & try many ways but steel have those errors.
My device os can boot(shap's 4.22 )
Model: Jasjam
ROM Before Flash:I dont know
Radio Before Flash: I dont know
Bootloader Before Flash: I dont know
Current ROM: shap's 4.22
Flashing Radio:
Current Bootloader : 2.1 olipro & can change to 1.04 With micro sd
CID : i think super cid
Radio Corrupt: Yes
No GSM Error: Yes
Stuck In Bootloader: No
Stuck On Windows Mobile Splash: NO
Can boot into OS: Yes
Tried mtty command Rtask: error comannd
Which radio/rom (rom with radio on it on NBH format only ) must I install on it.
The telstra roms that I downloaded from club-imat cant install(how van i change this roms to nbh roms ?? )
What should i do next? Thanks every body
Try installing a shipped rom, you should be able to locate it in the wiki.
Cheers...
I can help you solve in China