Related
I am trying to flah Wizard_MB_1010811_21911 rom on my 8125 but shelltool is sitting on this message "Do not disconnect the Wizard during the process" from last 40 mins. I followed the instructions in shelltool doc step by step.
Phone is unlocked and I am using it with Tmobile US.
Can anybody help me with this? is my phone is bricked?
Followings are the specs of my Wizard.
IPL 2.25.0001
SPL 2.25.0001
GSM 02.25.11
OS 2.25.11.1
Thanks in advance.
Its unlikely that shell tool will brick your phone, maybe render it unusable until you reflash another rom.
have you read the thread that details the use of the shell tool. There is alot to read but many problems are discussed there.
Shell tool shouldnt take any longer than about 15 mins, it takes me about 11-12. It seems as though you need to disconnect and reflash with wizard love or your carriers rom before reattempting to use the shell tool. Even though your post indicates that you followed the instructions step by step this may not be the case.
Shell tool most often fails because people dont miss a simple instruction such as dont run any other apps in the background, or turn the phone off.
As i said before i think you need to disconnect and reflash another rom such as wizard love or your carriers rom. Then you can attempt to use shell tool again hopefully with success. Keep us informed on how you go.
thanks for the response. I have this rom Wizard_Love_2[1].26.10.2_WWE_Novii_CF2 which i think is the same you are talking about.
Can u please confirm it.
Thanks again
yes, my file matching that name is 72.3MB.
Its in italian but you should be able to work out what buttons correspond to next, back, cancel etc. If not just memorise them from another RUU.
Thanks for your timely help.
I flashed the Wizard love rom and the process went through without any problem. One more question, I am using this sheltool "ShellTool_bugfixed.zip", can you please confirm that it is the right one. Size of this zip is 1.04MB.
Thanks again
Yes that is the correct one.
Read the instructions carefully and you shouldnt have any trouble flashing your rom.
Thanks .. I am gonna reflash in few mins. keeping my fingers crossed.
Thanks alot bwesty for your help.
Flashing WM6 went smooth. Right now I am cofiguring my email account.
Thanks again.
Hi guys, can u please upload this ROM to the ftp server or somewhere else?
Wizard_Love_2.26.10.2_WWE_Novii+CF2.rar
My Qtek s200 doesnt start
Thank you in advance
check your PM
HI all:
I looking for "Wizard_Love_2.26.10.2_WWE_Novii+CF2.rar"
and can't find. who help-me??
ptdeeper said:
HI all:
I looking for "Wizard_Love_2.26.10.2_WWE_Novii+CF2.rar"
and can't find. who help-me??
Click to expand...
Click to collapse
found with google:
http://pda.oleyek.com/ROM/Others/Wizard_Love_2.26.10.2_WWE_Novii+CF2.rar
Yes. tanks, tank you. now i found and my s200 have a new life
Why are you guys using an obsolete flashing method? Shelltools became obsolete when SoftSPL was released and now there is even HardSPL(CID unlocking).
Shelltools is a slow and painstakingly annoying process but SoftSPL is much faster, sometimes finishes flashing in less then 7 minutes and is very stable and reliable as long as you flash back to the Wizard love Rom or T-Mobile Official Rom first but even that is not entirely required, just recommended...
OK here is the story, had my spv m3100 for a few months, despite its bugs, been quite happy with it. decided to update the phone with the latest Orange update, after much messing about got it to start the upgrade process @ 17% it bummed out, and now i cannot get it out of tricolour mode.
I have tried the mitty.exe > set 14 0 method and its still the same.
the phone was unlocked when i got it (using it on o2) , active sync wont connect to it. I am reading through the forums now , but so far what i have tried hasnt helped.
the details onscreen are
herm100
IPL-1.01
herm100
SPL-1.09
what can i do to ressurect it ?
i`m in the uk.
thanks in advance (am still reading the forums now)
cheers
You should have done the reading before the flashing, you would have known to upgrade to olipro Hard SPL before flashing. Read this thread http://forum.xda-developers.com/showthread.php?t=286755 and follow the instructions in it.
Yes with hindsight your correct, however, when you download an official update from the resellers sight, you dont expect it to fook up your phone.
cheers for the heads up, read read read......
EDIT : IVE ALREADY READ THAT THREAD, MY PHONE WILL NOT COME OUT OF BOOT PROCESS USING THE MITTY.EXE METHOD.
If you were following reseller instructions and installing a reseller provided ROM when it died then stop everything and return it to them for repair.
i dowloaded the update from orange website. i bought the phone on e-bay a good while backso not sure if i can take it to service center etc.
also i need my phone so have to try and sort it.
ok, ive somehow managed to get it off the tricolour screem, it just stays at the WINDOWS MOBILE screen.
ive tried the soft / hard reset / battery out tricks etc etc, no go.
active synce wont connect to it either, anyone any suggestions?
after reading 50 pages of the thread i`m fairly confident that i`m gonna have to get it repaired specially.
Well, based on what you say, I think you can fix it.
Once again: Read this thread http://forum.xda-developers.com/showthread.php?t=286755 and follow the instructions in it.
and once again, i have literally tried everything in that thread apart from kitl (what ever it is) as my phone doesnt have this option.
i`m trying everything and it just isnt going anywhere.
That is the thread for fixing bricked phones. You have to post all of the information you can IN THAT THREAD so the experts can read it and help you out. you have a type 2 brick. See the 2nd post in that thread and follow that format to provide all the information you can. Follow the instructions and people will try to help you out. Your current situation should be correctable if you provide some information in THE PROPER THREAD.
OK?
You might be having problems with a USB port/hub interfering with the update (as per my post in this thread http://forum.xda-developers.com/showthread.php?t=293665&page=31 ).
Try the update again with just the M3100 connected to a USB port - if that port doesn't work, try another one.
In my case, first attempt with only the M3100 installed, got the unlocking to work correctly.
Hope that helps, and good luck with it.
ETA: Hmmmmmmmm. Seems there's more to it than just the USB (I think it's involved though). Dutty's WM6 Rom loader had the same 'shutting down' impact on Activesync. Tried Black 2.5, different loader (or something different about it), no problems flashing.
Hopefully that's useful info to someone, and I'll edit the message in the other thread.
Please dont tell me to read the other threads on this issue. Your better off skipping this topic and moving on to the next. I preffer this to go untouched with no replies than to have smart ass comments. Ive been reading pages and pages on how to do this for weeks with no luck. Theres about a few dozen options and with all the suggestions I have no idea where to start, nor what programs to download first, understand what these terms mean, etc. Maybe this isnt my cup of tea and I shouldnt even be attempting this but thats neither here nor there cause the fact of the matter is I screwed things up. Now Im looking for some help from the community.
Its getting real expensive and I need a serious expert who has patience and is very thurough. This is my second unit and I still have the 1st one that is still bricked as well. This is the situation for both. When I go to setting>system>device info, there was no radio version, no protocol version, no IMEI, and the call duration info was zero. I was able to use both units for thier PDA functions but not the phone prtion. I was attempting to SIM unlock and SuperCid em both. Now they are both stuck in bootloader. Im not sure what went wrong but I have done 3 other 8525's with success also updated roms and reverted back and no problems. I just cant seem to get the bricking undone. Now Ive done tutorials on housing swaps, step by step and provided pics as well. You know what, people still ask how to do it. Its a fact guys. some people just need a little more direction than others. What Im trying to say is Im looking for help not criticism, Im a grown man and the last thing I need is for some young punk to flame me,or telling me to read cause Its already been done. I can easily buy another phone but Im willing to learn how to get out of this bricking crap. So its back to reading. TIA
Heres How You Do It
I know how you feel because last night i bricked my 8525 cingular, Okay, If You Can Start Up Your DEvice All You Have to do is reset it to te factory condition and that would help you, unfortunatley all of your data would be lost, but its better than a bricked expensive phone. Oh, but your stuck in bootlaoder, well i have good news for you your not bricked your just stuck, go to the att website and a download and update and the update should recogize your phone even though the computer dosent, after that you have a brand new updated 8525 and that should get you out of bootloader.
ivan345 said:
I know how you feel because last night i bricked my 8525 cingular, Okay, If You Can Start Up Your DEvice All You Have to do is reset it to te factory condition and that would help you, unfortunatley all of your data would be lost, but its better than a bricked expensive phone. Oh, but your stuck in bootlaoder, well i have good news for you your not bricked your just stuck, go to the att website and a download and update and the update should recogize your phone even though the computer dosent, after that you have a brand new updated 8525 and that should get you out of bootloader.
Click to expand...
Click to collapse
Really??? This seems too easy. I'll try anything at this point. So you say its not bricked,just stuck in bootloader? So there is hope? Thats def bice to hear. I'll give it a shot. Thanks
LOL. Tried and and same problem. It sounded too good to be true. Thanks for the tip though
I'm not trying to be smart (believe me, I'm not equipped to do that!) just trying to help determine the exact state so that someone may be better able to help.
You say the phone's are stuck in bootloader, but that you're able to look at the device info on them, and use them for their PDA side. I always thought stuck in bootloader meant that when you switched it on, it came up with the multi-coloured bars but got no further (as if you'd reset it while holding the power and side OK button). Do you mean that the phone's work as normal but have no PHONE side of things, or can you get no further than the bootloader screen when trying to start them up?
Like I said, not trying to split hais just trying to get the exact symptoms for someone cleverer than me to help.
OK by the sounds of it you are definatly NOT stuck in bootloader.
firstly can you please answer the following questions from the wiki:
1. Which is your SPL version?
Put your hermes in bootloader mode (side ok + power button + softreset), the SPL version appears in yellow letters on the upper side
2. Which is your radio bootloader (HTC_BOOT) version?
If your radio version is <=1.27 your HTC_BOOT is 0106 or 0107, the only exception is Softbank X01HT 1.14 radio which has HTC_BOOT 0108
If your radio version is >= 1.30 your HTC_BOOT is 0108
If you don't know which is HTC_BOOT, but you have bootloader 1.01 MFG, 1.10.Oli or 1.04 you can access to the radio bootloader using the command 'rtask a', then type 'rversion' and hit enter (you won't see anything in the screen when you type rversion, because the radio bootloader has no echo, this is normal).
3. Is your device able to boot Windows Mobile OS?
This one is easy: If can you see your today screen and use your phone as a PDA means you can boot OS. If you only see the splash screen, bootloader screen (tri-color) or windows mobile splash screen you can't boot OS.
4. Do you see "No GSM" message in red letters on the first splash screen?
Reset your hermes, you will see some numbers and letters appear in red and disappear after a few seconds... your radio version is there, but if your radio is corrupted for some reason, you will see 'No GSM'.
5. Does your OS rom have KITL enabled?
Hold COMM MANAGER and POWER buttons together and reset with stylus, if you see the message "Select KITL Transport" your OS rom has KITL enabled, otherwise not.
Click to expand...
Click to collapse
Please post the answers back here when you are done.
Stu has an excellent point. Need to know the exact state of the 8525. Exactly what you have done to it....
Example: I used Pof's free HTC SIM unlock and SuperCid program. It appeared to complete successfully. However, now when I start the 8525 up it automatically goes into the tri-color boot loader screen. I had not applied anything else to the 8525 prior to trying to unlock it.
Also, there is a sticky for dead hermes. I bricked mine as well, and was able to get passed it. I posted in the sticky. If you post in that sticky, then someone else may benefit from what you find out. Keeps everything in one place
jeffreyj900 said:
Stu has an excellent point. Need to know the exact state of the 8525. Exactly what you have done to it....
Example: I used Pof's free HTC SIM unlock and SuperCid program. It appeared to complete successfully. However, now when I start the 8525 up it automatically goes into the tri-color boot loader screen. I had not applied anything else to the 8525 prior to trying to unlock it.
Also, there is a sticky for dead hermes. I bricked mine as well, and was able to get passed it. I posted in the sticky. If you post in that sticky, then someone else may benefit from what you find out. Keeps everything in one place
Click to expand...
Click to collapse
Yeah, but, if you used V3a to unlock it, you actually got Oli's BL as part of the deal--hence why you can unbrick it easily!
WELP no smartass comments HUH? Well if you ****ed up 2 phones like this you really must be doing something wrong there buddy. your phone is not stuck in bootloader if you can see the device info thats for damn sure. first thing load SPLV7 on your phone then flash a a complete ROM including radio and OS and then you should be all fixed and if that dont work there is a WHOLE thread just for BRICKED phones so go read like you said you whrere doing.... To me its sounds like you dont have a clue what your doing since you have done this to 2 phones and if you did have a clue your first thing would have been to load SPLv7
so go enjoy your not really bricked bricks
and if i remember right your one of the fools that was making fun af elf because he charge people like you to fix phones over at hofo... so take your problem over there or call elf for some one on one and eat some ****....
Click to expand...
Click to collapse
I gotta give you a lot of credit for that post. Me and a few other members had a bet that it would take less than an hour before the first idiot would surface, Thanks LOL. Who the hell is elf, and I would like to see the post that I had made making fun of anybody. If your gonna try to put someone on blast, back it up. Its assholes like you that a community can do without. Your a true idiot man. No1 needs you around here with that type of attitude. I dont blame you though, I blame your parents for having you. Your mom should have flushed the toilet when she had you then we wouldnt have a piece of **** like you in this world, shame on her. They should be ashamed of themselves for they way you have turned out.
I was able to do all the PDA functions prior to gettting my phones stuck in bootloader. That is were I am now. I got myself stuck in bootloader while trying to load HardSPLv7. I had not done any type of mods or upgrades prior to doing this.
Elf, I want you and that moron to post topics if me bashing you, I cant imagine me doing that. I am 30+ years of age, 3 children and a beautiful wife. I dont have a lot of time, nor do I have the time or care to flame other on these forums. I know that I look to people here and other forums more than they will need me. So please back up that what you are saying and I make sure that I make it an effort to put in my sig that I am an idiot and that you are god. If this it was gets you thru the day, so be it. Just back them comments up. Its a bad tag to put on someone.
My phone reads on tri color screen
Herm100
IPL-1.01
HERM1
SPL-1.40. Olipro
I can do anything other than see this bootloader screen.
(directed at the OP)
Instead of wasting your time replying to posts which are off topic why dont you answer the question posed in my reply...then we can get your two Hermes devices back to working order. Otherwise a mod will inevitably lock this thread and you will be back to square one.??
mrvanx said:
(directed at the OP)
Instead of wasting your time replying to posts which are off topic why dont you answer the question posed in my reply...then we can get your two Hermes devices back to working order. Otherwise a mod will inevitably lock this thread and you will be back to square one.??
Click to expand...
Click to collapse
When I recieved the phone there was no radio version displayed nor was there a protocol version. I also noticed that there was no IMEI that was displyed under the device info. While I was attempting to load the HardSPLv7, that is when I got stuck.
Bro I need serious step by step instructions on this. I've taken all that had been posted about this stuff and a have a pile of info about it. Theres not a whole lot I can do in the boot mode si Im trying to make sure Im doing the steps properly. The info I have given is based on the 8525, I'll work on the TYTN after. Thanks
My appologies.. I just checked HoFo.. You were not one of the idiots on there, as far as I can tell..
Sorry.
Click to expand...
Click to collapse
Appology accepted. Im not worried about man. I got other things to worry about.
Again can you PLEASE answer the questions in my reply?? I need an answer to all FIVE of them, a simple task which will give us the correct status of your device, even if it seems stupid...do it. (the questions im referencing to)
mrvanx said:
Again can you PLEASE answer the questions in my reply?? I need an answer to all FIVE of them, a simple task which will give us the correct status of your device, even if it seems stupid...do it. (the questions im referencing to)
Click to expand...
Click to collapse
1.SPL-1.40 Olipro
2.Dont know. Is there a way to check this now that I am in boot mode.
3.NO.
4.NO
5.Not sure. How can I find this out in the stage Im in
FLiPinoy9oNe6 said:
1.SPL-1.40 Olipro
2.Dont know. Is there a way to check this now that I am in boot mode.
3.NO.
4.NO
5.Not sure. How can I find this out in the stage Im in
Click to expand...
Click to collapse
OK, right you need to flash ANY ROm that contains an OS only, DO NOT try flashing a ROM which has a radio or SPL etc...
Follow my WM5 Downgrade Guide, this will take you through the steps necessary, select the relevant ROMs by HTC and Cingular (found in the wiki).
If that works as desired then update to HArdSPL v7 for both devices then flash a new radio.
mrvanx said:
(directed at the OP)
Instead of wasting your time replying to posts which are off topic why dont you answer the question posed in my reply...then we can get your two Hermes devices back to working order. Otherwise a mod will inevitably lock this thread and you will be back to square one.??
Click to expand...
Click to collapse
wont lock the thread since the guy needs help... but instead i will play janitor and clean it up... since some people will never learn to play nice...
More to the point, have you managed to fix them using the procedure i described?
mrvanx said:
More to the point, have you managed to fix them using the procedure i described?
Click to expand...
Click to collapse
No sir, Ive got two computers working on this right now. One to look at replies and the other to do the update. I had to get a bite to eat so Im back at it. Im trying to connect to sync but not working. Im reading up again on this Sd card deal and mtty so Im trying.
Yes ofcourse i forgot, once you have rebuilt the nbh to make an OS only update (OS,Ext ROM and the 2 splashes) you cant update as normal because there is no activesync connection...the sd card technique is what you need to do. After the device can get into OS and connect over activesync you can do the rest (HardSPL and Radio).
ok mrvanx, after using device monitor I fianlly got a connection and tried downloading a rom. Process goes thru and at 12% it stops and gives me the 262 error message. I do wat it suggest when getting the message with sof reset and try again, still same error.
flash from a damn SDcard and be done with this **** man... your wasting time half assing around... flash an OS.nb from your card and then do all that was told to you from above... this is the only way you will get your hermes working again
mrvanx said:
OK by the sounds of it you are definatly NOT stuck in bootloader.
firstly can you please answer the following questions from the wiki:
Please post the answers back here when you are done.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?p=9664136#post9664136
Sir please help me
1 HERM100
IPL-1.01
HERM100
SPL-1.40.Olipro
2 - rite now dont show while OS is on
3 yes OS loads ok
4 (yes) No GSM shows while boot
m 05
s 04 No GSM
B 06 D 3.57
5 I can't find as comm manager button confused
Even after reading this forum all nite, I am still soooo confused, maybe too much new info in m'head. At any rate, I am trying to UG from WM5 to WM6 and am having a heck of a rough time. Everything goes good until it actually starts the process, at which time I get the 260 Connection Error. After plenty of research on here, I decided to try to "flash" the ROM, to no avail, for nothing happened. I can get into bootloader mode but then nothing else happens (perhaps I'm not waiting long enough? How long should I wait?) and I never see the screen pictured here - http://wiki.xda-developers.com/index.php?pagename=Hermes_SDCardFlashing - so I just give up and reset. I am currently downloading the HardSPL utility so I can try flashing after the IPL and SPL ugrades. But I do have some questions still --
(1) Does my phone need to be "unlocked" to do this and how can I tell if it is or isn't?
(2) Can I just use the ROM that I downloaded from the HTC site or must I use one found somewhere on this forum?
Any other advice? All will be appreciated. Thanx.
Oh, yeah -- I'm working with a Cingular 8525 Hermes [HERM100 model number] Pocket PC. It's specs are:
ROM version 2.15.502.3
ROM date 04/09/07
Radio version 1.40.30.00
IPL 1.03
SPL 1.11
Have you read this http://wiki.xda-developers.com/index.php?pagename=Hermes_UpgradeForBeginners ?
Re:
Yes, I have, plus all the links branched from there. After about 3 hours of reading, I felt ready to try flashing, but it didn't work. The HardSPL utility is done downloading, so when I get home I'll try that and hope I finally get a successful upgrade. If not, I'll be back to the forums. Thanx!
What ROM are you upgrading to? The official AT&T ROM? I'd try that first if you're not already.
BDsBabyGirl said:
Even after reading this forum all nite, I am still soooo confused, maybe too much new info in m'head. At any rate, I am trying to UG from WM5 to WM6 and am having a heck of a rough time. Everything goes good until it actually starts the process, at which time I get the 260 Connection Error. After plenty of research on here, I decided to try to "flash" the ROM, to no avail, for nothing happened. I can get into bootloader mode but then nothing else happens (perhaps I'm not waiting long enough? How long should I wait?) and I never see the screen pictured here - http://wiki.xda-developers.com/index.php?pagename=Hermes_SDCardFlashing - so I just give up and reset. I am currently downloading the HardSPL utility so I can try flashing after the IPL and SPL ugrades. But I do have some questions still --
(1) Does my phone need to be "unlocked" to do this and how can I tell if it is or isn't?
(2) Can I just use the ROM that I downloaded from the HTC site or must I use one found somewhere on this forum?
Any other advice? All will be appreciated. Thanx.
Oh, yeah -- I'm working with a Cingular 8525 Hermes [HERM100 model number] Pocket PC. It's specs are:
ROM version 2.15.502.3
ROM date 04/09/07
Radio version 1.40.30.00
IPL 1.03
SPL 1.11
Click to expand...
Click to collapse
What operating system are you using? If its Vista you MUST use Mr. Vanx's guide to get past the connection problem. The standard Vista HTC driver is wrong when we want to flash rom's in bootloader mode and vista WMDC. Get it here:
MR VANX's VISTA GUIDE
Hard SPL is great after that. Just remember you warranty may be void if you have to go to AT&T for repairs and the see that bootloader. You shouldn't need Hard SPL to flash the standard AT&T rom or VP3G's or other AT&T based ROM's, but better safe than sorry.
Be sure to close EVERYTHING in the taskbar! Don't start any programs, allow any updates to mess around with the computer while its flashing..In fact, I disable my AV program and internet connection totally when I flash ROMS. (My Kaspersky started updating and virus scanning during my 1st flash..sucker froze and freaked me out!)
Once I dealt with unlocking and connection issues, I flashed the standard AT&T ROM, performed a hard reset immediately and then connected via WMDC and synced everything. I tested it for a few hours then decided to flash VP3G's excellent AT&T based ROM v3.62.3..I like to do a hard reset immediately after flashing to burn everything in...I've seen others in this forum do the same.
Another ROM I've found fun is S64's(Starbase64) 3.62 WWE v9 - It's not AT&T based but you can get WPBEAR's Config files to set your Medianet and proxy. There are other At&T settings CABs out there like Dr. Puttinghams. S64 ROM also includes Advanced Config 1.1 to set your keyboard to Cingular mapping.
Good Luck!
re:
My desktop PC is running Windows XP...
After trying the HardSPL method - which upgraded perfectly - I continue to have the above-mentioned problems; 260 Connection Error and inability to move beyond the tri-color screen to the one pictured on the page which instructs how to flash via SD card.
Thanx for the list of ROMs I can try. For the record, I have been using the "official" one I downloaded from the HTC website. *sigh* I guess I'll next look for the tutorial I saw somewhere around here on how to upgrade from the tricolor screen [or something like that, I think it was], as well as your advice.
But I do have another question -- how do I format the SD card? The tutorial I used on flashing with it mentioned formatting so I'll retry it with the card newly formatted (I didn't because it said I could just delete everything off the card OR format it).
I'll let you know how it goes...
Ahhh...Sorry for your troubles...I didn't have luck catching an upgrade from the SD Card method on my 8525 either.
I know it seems a bit much but, is your active sync working correctly? Upgraded to 4.5 and all that? Can you sync and Backup all your data then try uninstal, reboot, re-installing AS?
I wonder what would happen if one tried Mr Vanx's instructions on a Win XP box?
I also had heard somewhere about messing around with when Active sync is started. Also as a last ditch, maybe try this from the HTC Wiki:
http://www.htcwiki.com/thread/667087/ActiveSync+and+Rom+8525?t=anon
Good luck
BDsBabyGirl said:
My desktop PC is running Windows XP...
After trying the HardSPL method - which upgraded perfectly - I continue to have the above-mentioned problems; 260 Connection Error and inability to move beyond the tri-color screen to the one pictured on the page which instructs how to flash via SD card.
Thanx for the list of ROMs I can try. For the record, I have been using the "official" one I downloaded from the HTC website. *sigh* I guess I'll next look for the tutorial I saw somewhere around here on how to upgrade from the tricolor screen [or something like that, I think it was], as well as your advice.
But I do have another question -- how do I format the SD card? The tutorial I used on flashing with it mentioned formatting so I'll retry it with the card newly formatted (I didn't because it said I could just delete everything off the card OR format it).
I'll let you know how it goes...
Click to expand...
Click to collapse
Just another tip... Try a different usb port. I've found that sometimes certain usb ports behave differently during the upgrade procedures. So, far I've upgraded three 8525's on Win XP and only one gave me the problem you've described and connecting the sync cable in another port corrected the problem.
Re: my Post
shihayadreamer said:
...I also had heard somewhere about messing around with when Active sync is started. Also as a last ditch, maybe try this from the HTC Wiki:
http://www.htcwiki.com/thread/667087/ActiveSync+and+Rom+8525?t=anon
Good luck
Click to expand...
Click to collapse
OMG! SHIHAYADREAMER! That was JUST the TICKET! I read it and realized that I'd been doing it right all along, I just didn't realize I was! THIS time, I hooked up my cable at the very beginning and let it go. Before, I'd started waiting to hook it up until the instructions asked if I had because I'd gotten to the tricolored screen (the bootloader?) the 1st time and figured I did something wrong. Thanx to that forum, I returned to what I did the very first time and got victory! *falls down sobbing and weeping with joy* I wasted 25 hours because of fear! OMG! *dances around, singing* I've got WM6! I've got WM6!
I know that being reminded to turn off my firewall and stop all the programs in the taskbar played a big role, as well. But I just give a big "Thanx" (on Thanksgiving! *LOL*) to everyone who answered this board because you all helped me so very very much.
Hi guys,
Mods - first time post and im not a regular user so if im breaking the rules i apologise. I have spent hours already trawling the forums, but i am now admitting defeat and I need your help!
My Problem:
I have an x7501 SPL 1.06 0000, WM 5.0, GERMAN OS
I want to upgrade this to WM6.1 ENGLISH
I dont care what the SPL is, as long as it works, is reliable, and wont disable any standard WM functionality
I am not interested in tweaks, hulks, or other (non standard) tricks, i just want to get the device running a stock WM 6.1 rom
That said - if you guys think that going to 6.5 is the best (non beta, no risk) option, then im quite happy to go that route.
$50 reward to the first person who provides the following info IN A FORMAT THAT I CAN UNDERSTAND. im good with computers for a non pro (and can follow instructions , but this is just over my head!
I Need:
1) Link to an unlocker and instructions how to use, that will give me the required SPL (note my SPL is 1.06 - will this require two SPL flash steps??)
2) Link to a stable ROM that retains all windows functionality, and instructions how to use it.
If i find that i used two or more peoples help i will split the reward accordingly!
thanks in advance and keep up the good work!
Alan K
First you need to download the unlocker from this thread and follow instructions... http://forum.xda-developers.com/showthread.php?t=315831
This will give you SPL 1.2
Here is a handy thread with step by step instructions on upgrading your roms you should read through before beginning to flash...http://forum.xda-developers.com/showthread.php?t=429013
Unfortunately, the stock-like wm6.5 roms made by michy-prima that ran on spl1.2 are no longer hosted on any sites anymore. I can try to contact him for you and see if I can get a copy directly from him. I will see if I can do that.
Otherwise, you can change your spl to 3.5, which you might as well do anyways, as there are more roms for that spl and even the stock-like michy-prima roms were made in spl3.5 also, so if I can get those, I will get the spl 3.5 versions.
So to then change your spl to 3.5, you must have first used unlocker to make spl 1.2, then the only way that was made to change spl to 3.5 was to flash the Athena Project 4 rom, so go to this thread... http://forum.xda-developers.com/showthread.php?t=387409 and download the AP ROM V.4, unzip it, and run the flasher while your phone is connected with active-sync to your computer. This will install the spl3.5 and the AP4 Rom.
Now that that is done, you can choose any SPL3.5 ROM to flash... (make sure to only flash SPL3.5 Roms now... if need be, there is a way to go back to SPL1.2 if you need to, but there really is no reason you would need to.)
Probably the most modern rom with the most features would be the AGB Version 3.00 ROM, The Hulk one (I know you said you didn't want that, but it is the most current rom, and you can easily change the theme and wallpaper on it. This is the ROM I have on my Athena... its a nice ROM.) Here is the thread for that ROM... http://forum.xda-developers.com/showthread.php?t=614158
Just unzip the rom after you download it, and like before, hook phone up to computer and let it sync, then run the installer. You can also use the ealier AGB roms, too, if they look better to you, or any rom you come across as long as it is a spl3.5 rom.
And I will try to contact michy-prima to see if I can get one of his old clean wm6.5 roms or his stock wm6.1 roms, but I wouldn't count on me being able to get one from him. Personally I think the newer AGB ROMs are alot better and more recent and updated and would recommend using them.
Also, here is a convenient thread I just found that has links to many different builds and useful tools and guides... http://forum.xda-developers.com/showthread.php?t=397518 ... so if you want to try out a couple wm6.1 while you have spl1.2 or even after flashing spl3.5, as a lot of roms are made for both spls. Just make sure you only flash roms made for the spl that you have on your phone.
I hope this helps... if you have any more questions, feel free to pm me and I'll be glad to help. Happy flashing!
Hi Zarathustrax,
Thanks for the extensive instructions. I will be checking it this week so hopefully ill be sending you some greenbacks by Friday!
Thanks again!
Al
bigalk said:
Hi Zarathustrax,
Thanks for the extensive instructions. I will be checking it this week so hopefully ill be sending you some greenbacks by Friday!
Thanks again!
Al
Click to expand...
Click to collapse
Like I said, if you have any more questions or problems, feel free to ask here or pm me.
Sent from my HTC HD2 using XDA App
Also, if you prefer to have a winmo 6.1 ROM over the 6.5 ROM I suggested, there are links to many 6.1 ROMs in that last thread I linked. Here's the link again... http://forum.xda-developers.com/showthread.php?t=397518
MichyPrima's roms are no longer hosted, but I have heard good things about Taxists and Sogarths ROMs. You can easily try a rom and then flash another if you don't like it. Just remember, make sure to flash roms for the spl that you have. If you have SPL3.5 and want a spl1.2 rom, there are links to the tool to change back to spl1.2. The only way to go from spl 1.2 to spl 3.5 is to flash the Athena Project 4 ROM, then after that you can flash any spl3.5 you want. Let me know if you have any other questions or concerns.
Hi Zarathustrax,
just to let you know - i still havent managed to allocate time to this yet.
I havent forgotten about you, and im not pulling a fast one!
thanks again for your time and effort!
Al
Hi Zarathustrax,
In the very first step (unlocker link) Olipro says "follow the steps...."
I cant see the steps he mentions anywhere? This is one of the reasons for my original post
any ideas?
Al
Forget my last question - unlocker has the steps!
Hi Zarathustrax,
tried twice and i keep getting error 202 - "check cables....... cannot connect to phone"
I have:
1) connected and synced via active sync
2) set active sync not to sync any items except for files
any ideas?
thanks
Ive tried everything i can. ALL windows updates installed (along with .net 2.0)
AV disabled
Athenaunlocker added to firewall exceptions - im on a work network so firewall is controlled through group policy - so i cant completely disable. do you think this might be the problem?
bigalk said:
Ive tried everything i can. ALL windows updates installed (along with .net 2.0)
AV disabled
Athenaunlocker added to firewall exceptions - im on a work network so firewall is controlled through group policy - so i cant completely disable. do you think this might be the problem?
Click to expand...
Click to collapse
Hmmm... might be. I'll look into this and see if I can figure anything out.
Oh, by the way, sorry I missed your messages until now. I don't check these forums daily, so if you need to contact me quicker, send a private message to me.
bigalk said:
Hi Zarathustrax,
tried twice and i keep getting error 202 - "check cables....... cannot connect to phone"
I have:
1) connected and synced via active sync
2) set active sync not to sync any items except for files
any ideas?
thanks
Click to expand...
Click to collapse
I've been reading through the forums trying to find an answer... at what point does it show this error? Is it right away? Does the x7501 change screen at all or do anything? I think I remember having problems like this when I unlocked it years ago... but can't remember exactly what I did. Does the x7501 go to it's tricolored bootloader screen at all? It maybe is having problems installing usb drivers while it's in bootloader mode if it changes into bootloader mode when you get that error. Let me know asap so we can get this solved. Also, have you tried using another cable at all?
Putting phone in usb Mode
Try installing Enablerapi.cab before using the olipro unlocker.
Are you still on this
When you run the unlocker there are 3 steps - these are three separate buttons that appear on the flasher each time.
Can you indicate at which step you get this error? Go to this link
http://forum.xda-developers.com/showthread.php?t=378216
...IT IS IN GERMAN...but it gives very nice pics of the process...using google translate you can get some idea. BUT if you can indicate which step you were able to complete.....we can help better !
Also, what windows operating system?
bigalk said:
Ive tried everything i can. ALL windows updates installed (along with .net 2.0)
AV disabled
Athenaunlocker added to firewall exceptions - im on a work network so firewall is controlled through group policy - so i cant completely disable. do you think this might be the problem?
Click to expand...
Click to collapse
chappatti said:
When you run the unlocker there are 3 steps - these are three separate buttons that appear on the flasher each time.
Can you indicate at which step you get this error? Go to this link
http://forum.xda-developers.com/showthread.php?t=378216
...IT IS IN GERMAN...but it gives very nice pics of the process...using google translate you can get some idea. BUT if you can indicate which step you were able to complete.....we can help better !
Also, what windows operating system?
Click to expand...
Click to collapse
I'm kinda thinking he gave up or something.... I've pm'ed him and have been trying to get more info on his problem for a couple weeks. I think he was having the problem on the first step... and the enablerapi will probably solve his problem.
But doing all this reading and trying to solve this problem has got me to pull out my old athena and start playing with it again... it's been a couple years since I've used it... I'm on the HD2 now, dualbooting WP7 and android.... but I've gotten an interest in getting my athena set-up and working again. The athena was way ahead of it's time.... if we could get devs interested in it again and get a good android build ported over, it would make an awesome tablet/phone. I think I'm gonna try to play around with getting android booting on it, but my knowledge of linux and low-level kernel work is limited to none. The best I can do is try to put together a build with what kernels/tools are already out and working on the athena, which isn't much. I think they had it booting and got touch screen working, but not much past that.
Hi zarathustrax,
no i havent given up . was checking in regularly to see if i had any response from you but never even looked at the pms. sorry.
i have a few hours to crack into this now so ive set up on a new machine (different av and firewall) and im going to have a go.
will report back - thanks for all the additional info my man!
al
ok - so i unlocked successfully but i think i may have fcked up. when i read olipros unlocker thread its says that only step 1 is necessary, ("but if you do step 2 you must also do step 3")
as i was trying to get to spl 3.5 i presumed that i didnt need to do step 2 or 3. this might have been a bad choice.
heres what happened:
ran unlocker step 1, it worked, phone rebooted. i finished there as i wasnt sure if i needed step 2 or 3
loaded bootloader screen to check spl. spl said olipro 1.2. i though cool - rebooted phone and now its a black screen. i can get into the bootloader screen whish says:
ATHE100
IPL-V1.00
ATHE100
SPL-V1.20. Olipro
have been reading up on next steps, or how to get rid of blackscreen but no conclusive answer.
its friday so im off home - battle lost but the war aint over!
Well. I'm not an expert (my Ameo was unlocked as I bought it) but if I understand, the black screen is because the ROM on your device dont match the new SPL you have. Try to flash a new ROM (SPL 1.2, right?) should help.
bigalk said:
ok - so i unlocked successfully but i think i may have fcked up. when i read olipros unlocker thread its says that only step 1 is necessary, ("but if you do step 2 you must also do step 3")
as i was trying to get to spl 3.5 i presumed that i didnt need to do step 2 or 3. this might have been a bad choice.
heres what happened:
ran unlocker step 1, it worked, phone rebooted. i finished there as i wasnt sure if i needed step 2 or 3
loaded bootloader screen to check spl. spl said olipro 1.2. i though cool - rebooted phone and now its a black screen. i can get into the bootloader screen whish says:
ATHE100
IPL-V1.00
ATHE100
SPL-V1.20. Olipro
have been reading up on next steps, or how to get rid of blackscreen but no conclusive answer.
its friday so im off home - battle lost but the war aint over!
Click to expand...
Click to collapse
Just replied to your pm before checking this thread, so I see that you can still get to SPL bootloader screen. So, what you should be able to do now is get your phone to bootloader screen and hook it up to pc like that. Then let any drivers that are installing finish, and where it says "serial" at the bottom should change to "USB".
At this point, you can now run a custom rom installer and flash a new rom. Since you want to change to SPL3.5, you should install the Athena Project 4 ROM.
Or if you want to leave it at this SPL for a while and test out a couple WM6.1 ROMS that use this SPL, just flash one of these. Here's a good thread that lists almost every ROM available with links and says what SPL they're for... http://forum.xda-developers.com/showthread.php?t=397518
I'll do a little more research also about the screen not coming on to make sure it's not some other problem, but it probably is just the current rom isn't compatible with the new SPL.
I'm sending this post to your pm too.
Also, make sure you have the SD card and sim card removed when doing flashing. And check what radio you have on your phone... you must have atleast radio 1.50 or higher to use Athena Project 4 or most WM6.1 or WM6.5 ROMS.