I have the gullum prophet VIII rom
When I try to share the internet connection I have on my Dopod 818pro, I enable the internet sharing on the Dopod and click connect.
Once I click connect, windows vista discover a new device and need driver for it?? and cannot find any driver for it.
It mention a Generic RNDIS driver needed and hace following error:
Description:
Windows detected a new device attached to your computer, but could not find the driver software it needs to make the device usable. Each device manufacturer typically includes driver software of a CD that comes with the device, or as a download from its website. The hardware ID of your device is USB\VID_0BB4&PID_0303&REV_0000.
Problem signature:
Problem Event Name: PnPDriverNotFound
Architecture: x86
Hardware Id: USB\VID_0BB4&PID_0303&REV_0000
OS Version: 6.0.6000.2.0.0.256.1
Locale ID: 1033
Read our privacy statement:
http://go.microsoft.com/fwlink/?linkid=50163&clcid=0x0409
Any one encounter the same problem??
Where to get the Generic RNDIS driver for my dopod?
FOr your information I have try enable and disable :
Enable advanced network functionality ( on Dopod )
Allow USB connection connection ( on WMDC 6.1 )
Please help me to solve the problem.
Thank yiou.
just try out on a XP machine and internet sharing connect suessfully.
Wondering y this cannot work on Vista machine.
Please HELP.
Thank you.
All professional !!
Please help me to solve it out???
Or this question have been post somewhere in the forum?
Please point me out.
Thank you.
will wait some more or i'll downgrade my vista to XP Pro.
TQ
u need wmdc sync centre for which u need to get genuine test file and i hope u use vista ultimate ,have you done all this and is your sync centre working fine ,and did you try other roms like gullum7 or wm5
kamalneet said:
u need wmdc sync centre for which u need to get genuine test file and i hope u use vista ultimate ,have you done all this and is your sync centre working fine ,and did you try other roms like gullum7 or wm5
Click to expand...
Click to collapse
yes, i have the WMDC ver. 6.1.
it is not the rom problems, but Vista Ultimate, coz it is asking for a new driver.
When connect to WinXP Pro, the driver is automatically installed.
Thank you.
well, today i have reinstall the Vista Ultimate and guess wat??
ALL the problems solve.
I manage to connected.
Related
Hi all.
I tried to update to WM6 on my Dopod 818 Pro with ProphetTouchIXbeta2. It displayed and error and after hard resetting I can only get the splash screen. So I roamed the forum the whole day downloaded a couple of other WM6 packages (I could not get the WM5 files from the WM6 upgrade guide, link is dead). So I downloaded the ROM updates from the HTC websites for the 818 Pro. I can start the 818 Pro into Bootloader, but whatever ROM file I use will tell me Update Error 260 Cannot connect!!
The Bootloader tells me the following: IPL 2.15.0001 / SPL 2.15.0001 and USB connected. Active Sync will not connect.
Sorry, I am a newbie and should have waited for the official upgrade. But I had to try
Thank you in advance for any help!
Cheers,
Markus
Hi,
i had the same trouble some time ago. The false was, that I connect my NEO on an USB Hub, take a direct connection between your PC and your XDA. Also, if it's possible, try another PC. HTH
Put your Prophet in bootloadermode: press Camm button and soft reset at the same time.
In ActiveSync on your PC: DISable connectionsetting "Allow USB connection"
Conect your Prophet to a USBport directly with a cable.
Run a NVID-RUU, perhaps the official VID-RUU doesn't recognize your device anymore.
This should do it.
i can confirm this process
Thanks guys, but the main issue is:
1. I can get into Bootloader
2. BUT ActiveSync does not make a connection with my DEvice in Bootloader and the ROMs I tried cannot connect to my device then.
I tried it on 2 machines (Vista and XP)
Cheers,
Markus
starkus said:
Thanks guys, but the main issue is:
1. I can get into Bootloader
2. BUT ActiveSync does not make a connection with my DEvice in Bootloader and the ROMs I tried cannot connect to my device then.
I tried it on 2 machines (Vista and XP)
Cheers,
Markus
Click to expand...
Click to collapse
Activesync is not supose to conect to phone in bootloder
just run the wm5
Thanks,
but if I run the WM5 by HTC its only goes to the Verify information screen and after that. it says Error [260]: Connection. The Update utility cannot connect to your PDA Phone.
And in the beginning of the process it displays a couple of steps, like check that your battery is at least 50% charged and other ssteps, of which one is, that I have to make sure that ActiveSyc is connected.
Cheers,
Markus
Solved
Ok, the issue was that only this file from HTC would do the update: RUU_Prophet_2151327_21513121_021921_DOP_ASIA_WWE_Ship.exe
Alle the others I downloaded would not work, also not the files I got from here. One was by the way full of Viruses !
Thanks for your help guys! Will try to get to WM6 again now
starkus said:
Ok, the issue was that only this file from HTC would do the update: RUU_Prophet_2151327_21513121_021921_DOP_ASIA_WWE_Ship.exe
Alle the others I downloaded would not work, also not the files I got from here. One was by the way full of Viruses !
Thanks for your help guys! Will try to get to WM6 again now
Click to expand...
Click to collapse
which one was "full of viruses" and how you checked it ?
Sorry should have mentioned it before:
It was Prophet"s_2.20.7.34_2.20.7114_02.69.21
Virus or unwanted program 'W32/Sality.L [W32/Sality.L]'
All .exes were infected in that package.
Cheers,
Markus
After using step1 for upgrade ( tried pdaviet , Nvid and fantastic b4 )
i can't seem to get an active sync connection...
i tried the troubleshooter and it tells me to go to settings > connections on my s200 and tab the USB to PC...... but there is no such option in my connections menu.
this is what i see on the menu
-Beam
-Bluetooth
-Comm Manager
-Connections
-CSD Line Type
-GPRS Setting
-Network Cards
-Wireless Lan
i don't get it why can't i connect after a step1 is there any other sollution for this ? setting up your pda manual for active sync ?
further info Framework 1&2&3 Are installed
OS Windows XP fully updated
Well i hope there is an alternative.....
Greetings R0xXx0R
Fixed this myself
i got so tired of the spl 3.08 not letting me upgrade again to a wm6 rom so i tried something that had some risks using Wizard Service tool i managed to insert the rom ON A VISTA x64 SYSTEM!!! if some one want more answers reply here so i could help u out still it's @ own risk trying the same :O
I am trying to help a friend who is in another country to set up his newly acquired WM5 ver TyTn.
He has Vista, and already has tried to sync with the old Activesync 4.5 but Vista sees no connection to the device.
Does anyone here know if the new Microsoft Windows Mobile Device Center 6.1 for Windows Vista would work with his WM5 phone?
I would be looking to upgrade it to WM6 when he next visits but not to keen on talking him through it remotely!
In the meantime if he had a solution to sync his phone it would be great.
Thanks,
Al
WMDC is the replacement (or latest version fo Active sync).
Activesync is for XP and WMDC is for Vista.
To your question........I have not attempted a WM5 connection with WMDC...........but I believe it would work.
Good luck
Hello everybody.
I have some questions regarding my new Niki.
1.: What is the difference between HardSPL 1.16 and HArdSPL 1.15-mfg ?
One of the developers recommendet hardspl 1.15-mfg, but i wasn't able to install it. It installed hardspl 1.16 earlier and just ran the 1.15-mfg exe later. It flashed OK but when flashing radio afterwards, the screen still said "HArdSPL 1.16". PLease enlighten me.
2.: Has anybody ever tried to build an 20 key hardware keyboard to a 16 key niki ? i have my niki from t-mobile and i dont need the f*cking wnw and email key
3.: Can I go online over BT ? (I know, no customizing questions sry.)
Thanks in advance for you help
Best regards, Paul
1. the hardspl 1.16 is the oldest and the first hardspl. the 1.15mfg have special commands for futur development and enhanced hacks, like SIM Unlock.
For normal OS flashing ... you dont need 1.15mfg!
your error is ... you havent read the thread carefully ... to over write a hardspl, you need start a sspl first and then you can overwrite it. hardspl is protected ... this is why you cant easy flash a new over it :->
2. try it ... i think it works ... tell use you experience!
3. what you mean? online with what? laptop? yes ... its possible!
NetrunnerAT said:
2. try it ... i think it works ... tell use you experience!
Click to expand...
Click to collapse
Do I have to make anys Software modification ?
Or does the Niki recognize the hardware Keyboard model and changes the Layout automatically ?
NetrunnerAT said:
3. what you mean? online with what? laptop? yes ... its possible!
Click to expand...
Click to collapse
No, the other way around . GPRS and UMTS is ridiculously expensive with my provider. But I got it to work by configuring BT ActiveSync. Unfortunately, it has to be initiated by Hand on the phone every time.
Does anyone know a software solution for automatic ActiveSync over BT (like with the cable).
Is there a program that disables BT radio when the phone is in standby (display off radio on)?
1. he regonize the right kayboard and start the right drivers ... try it!
3. if you are in the activ sync mode ... all ip transfer runs over your PC ... buy a other dataplan from you provider!
NetrunnerAT said:
1. he regonize the right kayboard and start the right drivers ... try it!
3. if you are in the activ sync mode ... all ip transfer runs over your PC ... buy a other dataplan from you provider!
Click to expand...
Click to collapse
1. just ordered the Keyboard, i'll keep you up-to-date .
3. Thats exactly what i want ... IE synch up all my RSS Feeds / ActiveSync and Stuff while I'm at Home.
But I'd like to have BT all the way enabled so that I don't have to remember starting BT and starting ActiveSync everytime i come home.
I think I will try to implement sth like:
- Once an hour, startup BT
- and scan for devices
- if my Home PC is found, start Active Sync Connection
- after 2 Minutes, kill BT Connection
I think with this scheme the battery will go a long way AND I can just put the device somewhere near my Home in the evening and pick it up fully synchronised in the morning :-D.
I'm a software developer and when all the Interfaces are accessible with .NET Compact Framework and I don't find a solution on the internet, i will write it myself.
Any input on this topic would be highly appreciated (or get the Niki to talk WiFi (-: ).
best regards
Paul
you need to change the power profile of your bt connection. its a registry tweak! what settings you need ... i dont know :-> but i think ... easy to find!
help me...
WWE2.15 can be flashed in to 818pro, others can't...
only under xp or with a virtual machine under vista
which virtual machine do you use?
I am running xp on VirtualBox 1.6.4, and i can't flash my qtek s200.
I have configure 1 filter to all my use usb devices.
When i connect my phone, it synce with active sync, but when i run the rom installation program, when my phone displays the bootloader, virtualbox tolds me that it "failed to create a proxy device for the usb device".
Can you tell me how you did?
Note : sorry if my english is aproximative.
sorry i use a old win xp pc
but i hear that it works with VMware
and my english ist also bad too
thank you !
prophet -> throttle diamond and throttle diamon multi lang. both from gullum
kaiser -> throttle II also from gullum
soft and hardspl both phones, everything done under viste home premium 32bit.
no probs at all
and did you try do install tha radio rom 2.19?
schnitzelbrain said:
prophet -> throttle diamond and throttle diamon multi lang. both from gullum
kaiser -> throttle II also from gullum
soft and hardspl both phones, everything done under viste home premium 32bit.
no probs at all
Click to expand...
Click to collapse
Do you have a G3 Prophet?
I have a G3 and the radio rom install didn't work.
nope, I have a G4 and still the standard shipped radio rom
I have just tried to install gollum's rom on vista business 32bits, and the installation crashed.
ok, I've found this : http://forum.xda-developers.com/showthread.php?t=313001
I'll try and tell you if it works.
babinskyo said:
which virtual machine do you use?
I am running xp on VirtualBox 1.6.4, and i can't flash my qtek s200.
I have configure 1 filter to all my use usb devices.
When i connect my phone, it synce with active sync, but when i run the rom installation program, when my phone displays the bootloader, virtualbox tolds me that it "failed to create a proxy device for the usb device".
Can you tell me how you did?
Note : sorry if my english is aproximative.
Click to expand...
Click to collapse
I use vmware server 2 RC1 with a xp appliance, it works nice and easy.
babinskyo said:
ok, I've found this : http://forum.xda-developers.com/showthread.php?t=313001
I'll try and tell you if it works.
Click to expand...
Click to collapse
I've tried the driver and it does not work.
Thanks for VMware, i didn't knew the server version was free. I'll try it.
Flashing G4 Prophet with VMWare works well.
Thank you both, i've just tried vmware and it works !
vmware is the only way for me anyway to flash in vista. i'm sure it's the same for most of us.
don;t know how other people got the other way i.e old drivers etc to work...
Mmmmh, I think I should be thankful that my update didn't brick my prophet and the kaiser from my friend.
When the update fails on your pc is that always at a certain point ?
Do you have USB 2.0 connections and is legacy support in the PC BIOS disabled ?
Just asking for interest.