hi,
i need help. after i flashed my atom life o2 germany xda comet, the gms module doesn´t work. the problem i used this version: Xda_Atom_Life_WM6_WWE_RC2140907B2
i found the german rom dump and flashed via minisd.
Systeminfo:
IMEI: not ready
Version:
Radio: not ready
can i used another radio stack?
please can somebody help me?
TIA
NiKoN
Hi again.
You PM'ed me, that you have flashed the Atom Life Rom.
But you've not talked about the missing radio and imei.
You've said, that you can't flash back the german Romdump.
Now you write, that you've done it.
You don't give full informations, and now you are crying for help ?
Without more and complete informations, I think no one can help.
How did you do the update ?
How did you solve to bypass the CID check ?
What's with the missing files you described in your PM ?
Did you flash it ?
There are many missing informations.
sorry. i copied your 2 files on a minisd card.
my problem first,
if the telephone started to the bootloader menue on step 5 Burn mto/bt .... the telephone needed the file i mailed you.
if the minisdcard is connected and you enter the bootloader, it´s started automaticly without needing any files.
did you mean the cid while starting the upgrade process under windows?
if it´s this, i started the firmware .exe and on the second next to upgrade i clicked next and hold the downkey on my keyboard, bypass battery and active sync.
yes i flashed your dump, but it seems there is noch gms up/downgrade in your dump.
i hope o2 germany released a full german firmware so i can reactivatet my telephone radio stack.
TIA
NiKoN
scorpio16v said:
Hi again.
You PM'ed me, that you have flashed the Atom Life Rom.
But you've not talked about the missing radio and imei.
You've said, that you can't flash back the german Romdump.
Now you write, that you've done it.
You don't give full informations, and now you are crying for help ?
Without more and complete informations, I think no one can help.
How did you do the update ?
How did you solve to bypass the CID check ?
What's with the missing files you described in your PM ?
Did you flash it ?
There are many missing informations.
Click to expand...
Click to collapse
Additional info: bootloader checks file version and product version numbers; so, for the xda comet - the 12-byte header should be:
08 00 00 00 30 38 32 34 30 37 34 31 (hex)
ID: 08240741 (decimal)
The following files are responsible for boot up version check:
mxip_oem.dll
mxip_oem.ver
My particular interest is the ID. I have tried flashing my WWE Atom with a CHT ROM in Windows XP DSUU, and I only changed the 12-byte header of the CHT ROM to match my present device ROM. In this case, WWE. The flash finished successfully with all the CHT related files on my device.
jiggs said:
Additional info: bootloader checks file version and product version numbers; so, for the xda comet - the 12-byte header should be:
08 00 00 00 30 38 32 34 30 37 34 31 (hex)
Click to expand...
Click to collapse
Yes, but as I understand, he damaged the device while flashing the Atom Life ROM (No GSM/Imei).
That means, something was wrong while update.
I don't know, if it's possible to restore the Radio and Imei by flashing the complete update again.
If it has success, he can simply flash the Comet ROM by MiniSD.
I think, if he lost Imei and Radio, it won't be possible to fix the problem.
@ nikon110:
Have you ever tried to flash the Atom Life update again ?
Maybe the file is damaged ? Download it again.
I don't know, if it might be possible to flash the radio via MiniSD.
hey... thx for help..
a view answers:
yes i tried to flash again. (nothing changes)
yes i downloaded the file again and the version before. (nothing changes)
after reflash Xda_Atom_Life_WM6_WWE_RC2140907B2
i got an o2 setup where i can choose the connection type (gsm)
but i missed some countries.
in the setup there are only chinese, australian and indian countries to choose.
nothing about the uk or others.
the automatic found nothing and the manager chooses australia and a provider from australia.
i copy vl1d_pda_Ver.mot to the minisd
i tried to flash via bootloader an minisd with point 5 burn MOT/BL via UART.
the the device show: Please insert Mini-SD card to start downloading.
after inserting minisd the device show:
-> Found Mini-SD
->Files check error, cannot download MOT.
now the question:
does anybody know how to create the MOT (it´s the radio stack i think after reading many sites) from a new german xda comet?
i think that´s the way to reactivate the radio stack. i hope so...
i missed my device...
NiKoN
PS: scorpio 16v. thanks for your german dump. but after flashing yours again ít seems that the radio stack isn´t in the dump...
PS: jiggs. i only got the original wwe exe. how can i remove the header?
or is it possible to expand the original wwe exe. i can´t found the temp files if the setup expand the files. any idea?
nikon110 said:
i copy vl1d_pda_Ver.mot to the minisd
Click to expand...
Click to collapse
Where did you get this file ?
There isn't a .mot file in the Atom Life update !
PS: scorpio 16v. thanks for your german dump. but after flashing yours again ít seems that the radio stack isn´t in the dump...
Click to expand...
Click to collapse
No, the dump containes only OS and Extended ROM.
If you only flash OS and/or Extended ROM, this problem would never happen.
i can´t found the temp files if the setup expand the files. any idea?
Click to expand...
Click to collapse
You must start the update. Wait until the updateutility starts. Don't close it !
Go to Windows/Temp folder.Or better open it before, than you can see which files are extracted. Now you can copy all files to your prefered destination.
I think the file "amss.mbn" is the Radio, but I don't know if other files are needed too.
My tipp to you, flash back the german Dump and sent it back for fixing the problem.
And remember, if you ever want to change the ROM, flash only OS and/or Extended ROM via MiniSD.
Than, I believe, you'll never brick your device.
Hello,
I made the same mistake, as I updated the XDA Comet using the DSUU and of course the radio stack seems to be down. It could all be due to SIM-Locking, which enforces the radio part to remain down.
The question would be, whether it will turn out that updating the radio stack to the German one is possible ? Maybe as part of the Atom Life Kitchen research.
Thank you very much.
I decided to give the WWE 150507B2 a try and the situation has changed slightly, though of course it's by no means corrected.
T-Mobile (Germany) sim is recognized and I'm prompted to type my PIN in. After typing the PIN, the answer from the radio stack/WM6 (whoever might be) is: Unknown SIM Error and I'm asked to type my PIN once again.
System Info shows that both IMEI and Radio are "Not Ready".
A Vodafone (Germany) SIM is not even detected. (and yes it works in other handsets and worked before in XDA Comet).
Again, if the German radio stack could be dumped and the inserted in the temporary folder the DSUU uses, it could be an option to restore it. So if anyone could give a try at dumping it, I'd be more than glad to later perform the DSUU replacement test.
Best regards
Hello,
I made the same mistake, as I updated the XDA Comet using the DSUU and of course the radio stack seems to be down.
I find many life in asia , the radio is 2340, but the comet radio is 2350.
I use a updater only for 2340 to update my ppc. But feiled.
My Comet lost radio....
Can anybody help me to solve the problem....
Thank you very much.
There are 2 obvious solutions
1. O2 Germany publishing a DSUU with the original german software. IMHO the CD-Rom that comes with the XDA should have it included, just in case users want to flash back the device to its original state.
2. Someone being able to dump the radio stack from a German Comet. Of course, learning how to flash it back has to be done too.
Until either 1 or 2, I think that the best chance is to flash back German OS + Ext Rom and send it back to O2 for repair. They will obviously flash it back to the original state.
But I would like to avoid wasting a full month in the process of sending it to O2 and getting it back.
Regards
pepelu456 said:
There are 2 obvious solutions
1. O2 Germany publishing a DSUU with the original german software. IMHO the CD-Rom that comes with the XDA should have it included, just in case users want to flash back the device to its original state.
2. Someone being able to dump the radio stack from a German Comet. Of course, learning how to flash it back has to be done too.
Until either 1 or 2, I think that the best chance is to flash back German OS + Ext Rom and send it back to O2 for repair. They will obviously flash it back to the original state.
But I would like to avoid wasting a full month in the process of sending it to O2 and getting it back.
Regards
Click to expand...
Click to collapse
1. Why should O2 offer an Update to restore your device ?
To restore you only need a Hardreset. If you flash an other ROM, it's your problem and not O2's.
2.It's not possible to dump the Radio, sorry.
Many Atom Life user have changed their OS from chinese to english or reverse.
I don't know if they have all the same Radio.
For example, you can't downgrade an HTC Hermes with Radiobootloader 1.08 with an Radio with bootloader <1.08 it allways ends with a corrupt Radio.
Maybe it's the same with the Comet radio.
I think the only solution is the Service Center.
scorpio16v said:
1. Why should O2 offer an Update to restore your device ?
To restore you only need a Hardreset. If you flash an other ROM, it's your problem and not O2's.
Click to expand...
Click to collapse
What if an application destroys the ability to restore the PDA even with a Hard reset? Virus have not striken hard the PDA world but they may do sooner or later and that might be one the undesired effects we may be facing.
Whenever I have bought a laptop, the manufacturer has always given me a recovery CD, either in the form of a full OS CD or a customized recovery CD.
Why should a PDA manufacturer be special and be able to avoid providing me
with a copy of the OS I paid for ? (even if the OS is given to me in such a form that I can only install it in my device)
I am not calling for an update, but the original version of the software that came with my device and I have paid for.
P.D.
It is of course my own fault if I flash the ROM and something goes wrong. Stimmt!
today i got my repaired o2 comet back.
the services changes the pcb. it seems the romupdate killed the hardware.
thx for help scorpio16v 4ur rom dump
NiKoN
ppl help needed here badly... i'm in pakistan and i did MWg Atom Life on my o2 XDA Comet and my IMEI and Radio is missing what do i do... don't have any o2 center here what do i do
Related
Hi there,
I know, there is also a special thread regarding this issue, but my question is more general:
I want to upgrade the (write protected) Ext ROM of my XDA. As I do not have an upgrade tool from o2, I've downloaded the latest upgrade from T-Mobile Germany and followed Softworkz's instructions and made my own Extended ROM.
But now I am not sure, if it will be possible to flash my XDAII with the MDAII flash utility (will be flashing the ExtRom with o2 Files only). Do I need the original o2-Sofware to flash or can I take any HTCHimalaya-Software to flash my device?
Thanks for comments...
Bobopopo
Hi Bobopopo!
As stated here: http://forum.xda-developers.com/viewtopic.php?t=6289 it's quite easy. You'll find a step-by-step How-To (in GERMAN!) here:
http://www.smartphone4u.de/xda2/tipps_tricks/extended_rom.html
And it works like a breeze! The only thing is that I don't know, whether your O2 xdaII will accept the T-Mobile ROM - but I don't see any reason why it shouldn't.
Only issue could be the Radio Stack Upgrade, but I have no problems at all with the T-Mobile Radio Stack in the O2 network.
Also I don't know of a way to backup your original ROM of the xda II - but maybe theres still the bootmanager way to back it up to an SD-Card!
Grüsse,
Klaas.
Finally flashed the ROM of my German XDAII with a German T-Mobile ROM (1.60). Has been no problem at all and I am impressed how easy it was (using ER2003edit). The only thing I have to work on is the homezone control, it is not working yet but not so important anyway.
I cooked my own ExtROM, but I think it will need some more improvement.
1. Is there any tool that further compresses the Extended ROM? (My ExtROM ist full but I would love to put some more programs inside)
2. My target is, that the XDAII will need about 5 minutes after a hard reset to install all the required software and get back the old settings. Will a backup with ActiveSync also remeber the favorits, connection settings, program settings aso.?
3. Is it possible to flash with the speed of USB 2.0? Until yet I have only tried with USB 1.1. (because I use a PCMCIA-card to provide USB 2.0 and the flashing manual says not to use an USB hub).
Thanks for some more tipps & tricks...
Bobopopo
@bobopopo and @admiral_k
Hey, I see your are also O2 customers in germany and also have the
homezone feature of O2.
When you did the upgrade, you also upgraded the radio stack...
I think the homezone feature is linked to radio-stack, so Homezone-Control will not work with t-mobile radio-stack.
I see two options... leaving out the radio-stack upgrade or forget the homezone-control.
Could you please write your impressions if it's worth upgrading the radio-stack. Actually if have the homezone-control disable most of the time so I would not really care, but it's nice to know that i can check if I am in my homezone... ( really interessing if you surf the web via local dial-in numbers... )
regards
Alex
Until now I did not see any improvements on the Firmware of the XDAII, but the T-Mobile ROM is working fine...
Regarding the Homezone control, I am pretty sure that this has nothing to do with the radio stack (Reason: After upgrading the whole firmware, the Homezone has been indicated (after a softreset) and disappeared after the next softreset.
So I think the Homezone control is dependent on the Ext. ROM (that I cooked myself by taking some of the new T-Mobile Ext. ROM and some of the old o2 Ext. ROM). Maybe I just didn't find the right mix.
I'll post a solution as soon as I find one...
Hi guys!
I am in a simular situation, I hava MDA II with T-Mobile OS and a German O2 subscription.
I would like to add the auto config for O2, could this be done, if yes how specifically can this be done.
/L-O
Hi All,
I have an XDA II with the lastest O2ASIA ROM.... Kind of anyway.
I stumbled upon an update for the XDA II and thought I would install it. Unfortunately I did not see the link that said "Asia Pacific Users click here"
and ended up attempting to upgrade to the UK ROM. It appeared to run perfectly, but now I have an O2ASIA XDA II that only says "USB v1.06".
So I'm obviously stuck at the bootloader screen. Have attempted to put the latest O2Asia version back on:
ROM version: 1.60.00 WWE
Radio version: 1.08.00
ExtROM version: 1.60.44
MMS Client: 1.6.0.8
but no joy, I get:
"Model ID Error 1-N-PH-PH-PH"
I have read through many posts with nothing really being of any help at this point.
How do I get my XDA working again? TIA to anyone who has slightly more of a clue than me
JP
I think your first update modified either your device model ID, country ID or language ID ... in this case you can unpack your Asian ROM upgrade file ... use xda2nbftool.exe to modify its files to have the O2 UK signatures.
Ok thanks, I have tried a few variations, but it does not want to co-operate.
Is there any way from the bootloader and the serial console that I can find out what its settings are sp I can match them up with xda2nbftool.exe?
Or is there a way via the bootloader and the serial console that I can change them?
well, you can try this ... use ER2003Edit tool to open the UK upgrade file ... you should find the required IDs there
Yep, did that. Used same tool to set the AsiaPac files but no joy, same Error 100: Model ID Error.
There does not seem to be any info around regarding creating an SD image on a PC that could be used to restore everything - that would be handy.
I am experiencing the same, allthough using the correct German ROMs:
http://forum.xda-developers.com/viewtopic.php?t=10668
Ok, problem sorted.
Booted a mate's XDAII to the bootloader, created the three ROM images on an SD card, put it in mine and it all downloaded successfully.
Does anyone know how I can take an image of the SD card?
JP
i've experienced the same problem when I downgrade mine from 1.66 to 1.60 O2 Asia
First reflash the unit with the 1.66 ROM, Use the ER2003Edit, make the DeviceID, Langguage Blank. the Country = 'O2'
the flash it.
then flash it again use the Original Working ROM from O2 UK or ASIA.
But for right now it is not possible to downgrade from 1.66 to 1.60 since from the information I got from the service center there's different Main Board for the XDA.
hi _JP_,
you can do that by a program called hex workshop. it allows you to save hex dumps of any storage card into a file and back again. i have done this today successfully several times. now i have the same problem. i have flashed my xda2 with a german 1.72 dump from an eplus qtek2020 but now the way back is blocked without a correct dump of a german o2 xda2, which i dont have available :-(
greets
peter
O2ASIA dead ROM
Hi, I am having the same USB 1.06 screen dead OS problem after trying to convert 1.66CHT ROM to 1.60WWE ROM.
Please help, I am not sure
1) what header information to change the 1.60WWE ROM so that i could flash the ENG version in the O2ASIA
2) used ER2003EDIT with error after trying to change the header information
3) dont' have the 1.66CHT ROM? couldn't get back
PLEASE HELP to get my O2 back !!! many thanks
Hi Cmong,
Here are the steps to sort out your XDA.
1. Find someone else with the same XDA (preferrably a friend - doing this will delete all their settings and data)
2. Get an SD card (I used a 128MB but 64 should do).
2. Download this: http://forum.xda-developers.com/download.php?id=19
3. Back up the data on the other person's XDAII
4. Disable USB connections in ActiveSync
5. Boot your friend's XDA to the bootloader (Power-Direction-Reset)
6. Put the XDAII in the USB Cradle
7. Use the program from (2) to backup all the ROMs to SD. I used the instructions found here: http://en.pdamobiz.com/en/forum/forum_posts.asp?TID=62
8. Put the SD card into your broken XDAII and reset it
9. Push the power button when it tells you to and it will dump the ROMs to your XDA
10. Have a celebratory beer because your XDA is now working.
HTH
JP
Hi, i have exactly same problem here (bootloader version 1.06), reading all the forums but no luck thus far. Problem is I don't have a mate with an xda 2. Anybody know where i can find the image needed and how to save it to SD card? I am no techie so step by step instructions would be welcome If nothing else works, if any kind soul would be so kind to email the image to me, (in chunks if its too big to email) I would be forever grateful
TIA for your help, hoping to get my xda 2 back form the dead :?
some more details... my xda 2 is brand new uk version locked to O2. Anyone with a dump image that could solve my problem? TIA
Gday mate,
You are in the UK so I don't think my image is going to work, but since you are desparate I will post it here.
I can't help you out too much, I created the image with the hex editor mentioned in the above posts, I have not had time to play with it and can only tell you that it is an image of the 128mb flash card that i fixed my xda with.
While I have dumped it from the card, I have not actually experimented with how to write the image back to the card so I think if you are not a techie you will struggle a bit to get it working.
Note that this is the Asia Pacific image and will probably not work in your xda since you are in the UK.
If you do manage to write the image to the SD card, just put it in the slot and reboot the xda and it will tell you to press the power button to download.
Can I suggest that this forum might be a good place to post other SD ROM recovery images for other regions apart from the one I have???
thanks
i will try and download it... waiting for a fellow from the forum who has the right image (hopefully) to get back to me... and i am surprised as u r these images are not readily available on the net.. I think they would solve many problems in case something goes wrong when u update. As a matter of fact these image files should be available form the product support (just like windows boot disks are available to repair a desktop computer) thanks for ur help, if anybody knows how to dump the image correctly, please post the procedure here (will need it for uk image too)... I am not asking too much am i?
cheers
peter_altherr earlier in this thread I think knows how to do it.
When I reboot, it doesn't ask me anything
Thank you for your help.
I have copy the image to the my SD card and try to reboot like what you mentioned, but it doesn't ask me anything. All it did was just showing the serial v1.06. I tried the power + direction pad + rest and it is no use. Am I doing any thing wrong?
my first post and contribution.. hopefully it would be alot of help to other people..
this is the official IMATE 1.72 ROM...except that it was encoded to work with O2 XDA2 units
added the O2 splash screen to retain the O2 bootup image -just load O2.cab into your XDA2
the upgrade utility shouldnt show you any more country ID error for O2 XDA2 units.. if there are problems.. holler me ASAP!!
feedbacks would be nice, coz i would like to make upgrades for other Network providers as well..
Thanks for that.
Can you show me a step by step guide on how to upgrade O2 xda 2 1.60.WWE version to this?
Thanks again.
ok... im not an expert yet, coz i just had my XDA2 for a week, but i do enjoy tweaking and playing with it.. besides, the knowledge i gain thru reading this forum is more than enough..
ok.. here goes..
1. create a full BACKUP your XDA2.. (but i dunno if this is helpful should you fail to upgrade your ROM)
2. download the above file and extract it.
3. you should see it extract 7 files.
4. put your xda2 in the cradle connected to the PC
5. run HimaUpgradeUt.exe
6. wait around 30-60 mins. then follow the procedure as shown on your computer. (a hard reset would be required)
7. after the upgrade is done, you should see the IMATE screen upon booting up (instead of the O2 bubble screen) if you wanne be extra sure, check your XDA2 version.if everything is ok, then you should have upgraded it correctly
8. if you want to revert to the old O2 splash screen during bootup, then copy O2.cab to your XDA2 and run it there. Do a soft reset, and voila, it should be back to the old O2 bootscreen.
I suggest that you contact your NETWORK PROVIDER because you will need to manually configure GPRS, MMS, and INTERNET settings on your xda2 after doing the upgrade.
WARNING: i wont be held responsible or liable for failed upgrade of your unit. Please understand that by agreeing to upgrade your XDA2, you are taking full responsibility of whatever untoward incidents that may occur to your XDA2. Flashing the rom might lead to DATA LOSS, SYSTEM MALFUNCTION, and even DEVICE MALFUNCTION.
but.. the rewards of upgrading it is sweet!
Many thanks for all of these description.
BTW, how do you feel the upgrade?
What you really get from this?
Can you share with us?
Thanks again.
Cheers mate.
i dunno, im just a week old newbie in using XDA2 :wink:
i just enjoy tweaking the XDA..so far, no problems here.
My xda2 currently is 1.66wwe. after upgrade to 1.72wwe, what's the different between it? anything increase? sorry because i'm a new bird
did a lil research.. so far, came to this...
The 1.72 ROM eliminates the majority of problems from the 1.66 ROM such as:
Increased battery drain
Device slows down
Bluetooth GPS devices don't work, even with Pocket Bluetooth Tools
Can it be downgraded back to O2 xda2 1.60WWE Rom?
Many thanks.
i doubt that it can be downgraded... i havent personally tried to downgrade my ROM to a lower version.. but there are other threads related to this, and they claim that when they tried downgrading their ROMS, their XDA2 died....
you can try searching for other topics if there are information about downgrading... .so far, i dont have any problems with my 1.72 ROM...
except that there is no running program application which enables me to switch off any running program in the background.. but i easily remedied it by downloading TASKMANAGER.... its quite the same with running programs...other than that, so far, so good.
Error 121 Language ID Error
Hi,
after running HimaUpgradeUt.exe I get the message:
Error 121 Language ID Error (N-2-1-0-1), the ROM image that you are trying to use is not designed to work with your Pocket PC.
I ran ERedit2003 Version 1.2.20 and opened the file ms_.nbf using the password 0x20040305. I saved the file with the different language settings WWE, ENG and GER. Always the problem remains the same.
My XDA2 currently has ROM 1.66.01GER.
Thanks for help.
try to change the operator name , too! or use other hymalaya upgrade files, from other roms!
Re: Error 121 Language ID Error
GentleMan said:
Hi,
after running HimaUpgradeUt.exe I get the message:
Error 121 Language ID Error (N-2-1-0-1), the ROM image that you are trying to use is not designed to work with your Pocket PC.
I ran ERedit2003 Version 1.2.20 and opened the file ms_.nbf using the password 0x20040305. I saved the file with the different language settings WWE, ENG and GER. Always the problem remains the same.
My XDA2 currently has ROM 1.66.01GER.
Thanks for help.
Click to expand...
Click to collapse
hi, i tried encoding with it again.. please download it, replace the other files and try if it still gives you errors or not. thanks... ill be waiting for your feedback
Re: Error 121 Language ID Error > Error 120
Waxx said:
hi, i tried encoding with it again.. please download it, replace the other files and try if it still gives you errors or not. thanks... ill be waiting for your feedback
Click to expand...
Click to collapse
Hi,
Thanks. But now I get the message:
Error 120 Language ID Error ( N-1-8-1-8 ), the ROM image that you are trying to use is not designed to work with your Pocket PC. I tried with settings O2 WWE, O2 GER and O2 ENG.
When specifying CDL instead of O2 the error code changes to Error 120 Language ID Error ( N-1-8-8-8 ).
So the problem remains the same
Thanks for help.
Help for beginners: upgrading O2 Xda II to ROM 1.72
New to Forum-sorry to be slow on the uptake. I am trying to undersand how to upgrade O2 Xda II (ExROM 160.50) to ROM 1.72 without losing the machine. Waxx says you need to reconfigure the ISP settings (I assume because they are lost in the upgrade). I cannot find O2 settings for GPRS Interenet and MMS on the net. Talking to O2 is a waste of time.
Does anyone have a step by step description that results in ROM 1.72/Radio 1.18 (or lower if 1.18 still in beta) working on O2 Xda II?
Has anyone reported doing it sucessfully. Have non recoverable failures been reported?
RamyG
Just copy the attached CAB file across to say, My Documents on your XDA, and run it via FileManager.
It will customise your O2 XDA II with all the correct settings.
Once it has done that (and you've tested it works), just uninstall the O2 Active bit and your settings will remain (well they did on mine)
BTW - I upgraded to the new ROM, and have had no problems at all ! Very sweet
Mark
Thnx Mark, just to make sure before I jump in: the steps are:
(1) upgrade to 1.72 using Waxx's attachement (is that the file you used?) (2) follow the procedure you described and I will get O2 customised Xda II (same as where I started) but with ROM1.72 and later Radio Stack. Right?
2 questions:
(a) are the GPRS setting for MOBILE WEB (post paid)
(b) what benefits should I expect from the upgrade? (other than the satisfaction that it succeeded, l if it works?
thnx
RamyG
Yep I used the attachment from Waxx ...
The procedure you mentioned is correct ... I did have a few heart stopping moments after the upgrade because (like you) I couldn't find the necessary settings for GPRS etc .. but the O2 cab file re-installs everything back to what it should be for the UK.
You are prompted to choose relevant settings - in this case you get a choice from either post-paid (MobileWeb) or PrePay ...
As for benefits, people are reporting better bluetooth support, and better battery life. Only upgraded mine yesterday, so can't comment on either yet !
HTH
Mark
Has anyone else had problems charging overnight with the ROM version?
Got Error 120: Country ID error N-8-1-1-1
Hi all,
I am new member here. I did upgrade to ROM 1.72WWE and seems working fine. Because the PDA is idle, I try to roll back to ROM 1.60.44 eng. and got the country id error N-8-1-1-1. I tried to set the regional to English (UK) and English (US) but failed. Any comment? My XDAII is bought from Asia-HK. Thanks a lot.
Chris
Mark thnx for your help. For all those undecided souls I can report that Waxx's ROM 172 upgrade works fine for O2 Xda II. (BTW: it takes 3 times as long to upgrade as they say it does - it's 30 min for each of ROM ExROM and Radio modules).
Mark, O2.cab did not work as exepcted for some reason. When I ran it, it simple created a text file with O2 network config info and did not actually configure the Xda II. The info was correct and a manual config worked first time. Puzzled, I ran the O2 cab again but from another directory. This time I got the O2 spiral (I may have gotten the network configed again I can't know as I had previously configured it manually . The upgrade did lose the O2 dialer screen and reverted to the iMATE one. This is trivial. the Net is full of free attractive skins. e.g http://sourceforge.net/projects/pocketpc-apps/
Mark Peters- I thank you again.
RamyG
Sorry for my bad english
(i will now be responsible if something happens in your device)
reply for much more clarification
******************
Specially dedicated to the Filipinos!! MABUHAY TAYONG LAHAT
******************
Well first of all i like to say Thank You very mush to WAXX who helped me in upgrading my o2 1.66 to 1.72. Thanks You WAXX.
********************************************************
Well... firstly download this file came from WAXX.
http://forum.xda-developers.com/download.php?id=1261
After the download extract the zip file inside it, you shoul be seen 7 files.
I recommend you to extract it in desktop/new folder.
Plug the cradle in your USB.
Insert your XDA II in cradle
Run HimaUpgradeUT.exe, Then follow the steps.
if error appeared, remove the device in cradle and soft reset it, then run the HimaUpgradeUT.exe again.
if error appeared again do a soft reset again.
If no error then it will now smoothly running up to 100% of the proccess.
For me the process takes only 15 min. There are stage 1 to stage 5 for completion.
That's it.
********************************************************
Goodluck.. GodBless..
(i will now be responsible if something happens in your device)
You can approach me for some questions.
Take note this ROM was came from MAXX.
Thanks WAXX for your help.....
CONGRATULATIONS !!!!
I would like to know to your device information (list of rom) !!!
Ok, downloaded the ROM
How do i backup MY rom incase anything goes wrong ?
will the upgrade work with a XDA II for O2 UK Network ???
cheers
Hi
I downloaded the file and unzipped it, when i try the upgrade it says error 120 country id error. my rom is 1.60.00 wwe dutch what is the problem?
Thanks
I would strongly afvise anyone who wants to upgrade to use the 'manual; by dcs together with any ROM Upgrade to prevent (future) country-id errors.
see http://forum.xda-developers.com/viewtopic.php?p=62760#62760
double_ofour,
pare i certainly hope you modified WAXX's ROM to set your Device to O2, instead of CDL You may have had a successful ROM upgrade now, but setting your device to CDL has major implications for future ROM upgrades (Hint: You cant use official O2 ROMS).
Pare how can i convert CDL to o2? step-by-step please
Hi,
I recently had a power cut (yes, a lights off power cut!) that killed my PC half wat through installing the Cingular English CWS__001 1.34.502.1 09/21/06 ?? 1.16.00.00 32.53.7018.01H 14955.2.3.0 ROM onto my SPV 3100.
Now SPV 3100 will boot to the ROM I was running prior to the upgrade but I can't use the telephone. I'm also not able to rerun the upgrade as it got far enough through the process to upgrade my bootloader to 1.06 - therefor rendering me unable to load another ROM.
Before the crash I was using the Imate ROM as below and M3100 was sim unlocked and running on o2 3G
i-mate English CDL__001 1.20.305.3 07/21/06 1.20.305.104 1.07.03.10 32.41.7010.02H 14955.2.3.0 1.04
Please help.
Thanks
If your device is still working ok as a PDA then hopefully it just screwed up the radio update of your device.
Try reflashing the Radio only
Look Here
http://wiki.xda-developers.com/index.php?pagename=Hermes_ExtractedRadioRoms
Post back with results
Regards
S.K
EDIT: Sorry only works on 1.04 bootloader only. Afraid your gonna have to wait for Pof to come up with a 1.06-1.04 workaround
Hi S.K,
Thanks for the info. I have now tried installing the HERM_1.20.31.10_type2_radio_fixed upgrade but unfortunately the radio upgarde crashes also. It all seams to go well, (after using MaUpgradeUt_noID.exe twice) the phone says "Upgrade Radio Stack Please wait" and the progress bar appears on the PC but then after 10 mins I get an ERROR 114: RADIO ROM UPDATE ERROR.
Do you think this might be becuase the last upgarde partly installed bootloader 1.06?
Any other suggestions - I'm desperate to get the hpone on M3100 working again.
Thanks
Read here:
http://wiki.xda-developers.com/index.php?pagename=Hermes_UpgradeProblems
Please post USB monitor capture, otherwise can't help u.
Hi Pof,
Thanks for the offer, I will sort out the usb software on Monday. Are there specific actions that I should try, obvioosly I will usb monior everthing I do but I want to keep it to the point and not waist yr time trailing through huge log files.
Cheers
BTW - I have tried all options of recovery, such as attempting to install the latest radio and trying to install the new rom from an sd card, trying several roms and using imei unlocker - all without any joy.
I think the problem is that I have partially installed radio and bootloader 1.06 so I can't fix the problem.
Thanks again.
@wotthefok:
For me is faster to look at the usb log file, then I exactly know why the upgrade fails, otherwise I have to decode it from your feedback and I can't be really sure. Check the "upgrading problems" page on the wiki, if none of the steps there seems to fix your problem, post USB monitor log please.
Log Files as requested
Hi,
I have captured information using usb monitor and attached the zipped log files for your attention.
The first is called USB_monitor_log_Herm_120Radio_twice. This log details attempting to install the HERM_1.20.31.10_type2_radio_fixed upgrade, and running it twice - just in case.
The USB_monitor_log_runing_Cingular_1.34.502_11_uprgrade_twice.zip details attempting to install the RUU_HER_Cingular_1.34.502.1_1.16.00.00_wwe_cws_ship upgrade, simply using the standard ROMUpgradeUt.exe method. This generates the expected Vendor ID error.
My primary focus is to install the radio upgare or download my bootloader to 1.04. The PDA part of my m3100 does now freeze occasionally but at least functions whereas the phone is completely dead.
Thanks in advance.
Please attach capture in *ANSI TEXT FORMAT*, the .lgs file you zipped is totally unuseful
Edit -> Export and Save as type "ANSI Text files".
Also make sure you export in "COMPLETE" view, see the wiki for more details.
OK, Spot the novice.... I have now created a txt log file that captures activity of me running the 120 Radio upgarde - but only once this time. I still had to zip the file due to it's size. Hope this is OK.
I'll send the other logs within the next couple of hours. Please let me know if the output I have sent so far is acceptable?
Thanks
wotthefok said:
Please let me know if the output I have sent so far is acceptable?
Click to expand...
Click to collapse
No, it's a "basic" capture, you have to export a "complete" capture:
Start USBMonitor.
File -> New session -> USB Monitor -> Select USB device where your phone is connected -> Check "request view" -> Finish
In the upper part there are two tabs: basic and complete. Click on "Complete".
Right, Try again (duh!) OK, I've tried to keep the log files names as self-explanitory as possible... USB_monitor_log_Herm_120Radio_run1.zip is the r20 radio upgrade, 1st run and USB_monitor_log_Herm_120Radio_run2.zip the second run - without disconneting or resetting the device.
USB_monitor_log_runing_Cingular_1.34.502_11_uprgrade_ran_twice.zip is the Cingular upgrade run via the ROMUpgradeUt.exe, again run twice without disconneting the device.
Hope I got it right this time.....Please let me know if there is anything else I can do.
Thanks.
This time you got the captures right
- You're on bootloader 1.06: You don't have 'rtask' command, you won't be able to do any radio upgrade only.
- Your device is not CID unlocked (Security level=FF, unprivileged)
- The bad flash caused the CID area to corrupt (CID: Wait interpreter timeout)
- When flashing a full ROM you get a CID not allow (255) this is because your corrupted CID doesn't match the CID on the ROM.
The radio part is screwed, you could have fixed this if you where in bootloader 1.04 by flashing a full ROM, but as you are in 1.06 you can't because of CID checking. But you're lucky because the OS ROM is intact and you can boot the OS, you should be able to downgrade to bootloader 1.04 from OS and flash a full ROM after, which will hopefully fix your radio.
Just wait until a solution to downgrade bootloader is available (I'm working on it).
Hi,
As I suspected.... Suppose it's not all bad news though - just means that I have to be patient and use my communicator once more. Do you know if the guys at IMEI-CHECK have a downgrade solution? Even if it's a pay for option??
I have already got a IMEI-CHECK sim unlock from where I originally got the M3100 unlocked from Orange to work on o2. That said, I have run either unlocker 2 or 3 with the .unl that I know worked I now get
HTC HERMES v3c unlock
Starting communication.........
Checking device..............ERROR
The device you try to unlock is not supported.
Please contact your supplier site.
Device is rebooting
Press any key to quit this application.
I'm currently chatting to the guys at IMEI-CHECK re this problem.
Anything else I can do to assist you in anyway??
Cheers
wotthefok said:
Do you know if the guys at IMEI-CHECK have a downgrade solution? Even if it's a pay for option??
Click to expand...
Click to collapse
They have it (M3100v3cUnlock.exe), but it will not work on your device because your IMEI is corrupted and their unlocker will not be able to read it and to check/compare with the .unl key file.
Hi,
Just a quick update. The guys at MIGsofT LTD have VERY VERY generously said they'll have a look at the problem for me so my phone will be winging it's way to them today.
Thanks for your assistance and helping me be certain of the problem and to better understand the root cause.
Hope this information will prove useful to others.
Another quick update...
The guys at IMEI-CHECK (MIGsofT LTD) have rectified problems with my handset and managing to reinstall bootloader 1.04 in the process!!
They also turned my phone around in under three days and only charged me the cost of postage! I had previously been a customer of theirs but it was still a very generous and helpful offer and I would certainly pay for the service than have a duff handset - after all £250 + for a paperweight is rather excessive....
If you're experiencing a problem like mine why not get in touch with them and offer them money to have a look at your handset? No Guarantees but it seemed like my last chance, for a while anyway.
Praise to IMEI-CHECK for a brilliant service - they are King of the day !!