Dear Expert,
I manage to modify Atom Life Rom diskimage_ver.nb0 and it work on my hp6828. But some function not working like wireless Manager and other due to hp6828 have no externalRom . Can someone teach me how to transfer the EnternalRom file ? Any tools that I can do it and the procedure . Thanks
Which version WM?
ATOMWM607AB3WWE rom created by jigg
Extract using WinImage.. and copy it..
Already did it . If I just copy those file , it doesn't work . Any file that I need to modify ? like HV or initflashfiles.dat ? Because I'm just start pocket PC , so my knowledge of this system is very poor .
Yesterday when I flash rom , forgot to delete atom bootloader , during the step 3 at flashing External Rom , my Hp6828 hang at 6% . I make a big mistake ....(Reset the phone) . So now great . Phone dead now . Search through web and try hundred way to reset , refesh , The phone no respone. I can't even on the Power .
Will send it back to HP service center. Hope not so expensive.
simply copying the extended ROM file will not work because your DOC (disc-on-chip) was formatted differently. You might consider changing all the other programs that need to search for the extended ROM to do it locally.
For instance, most of the files located in the extended ROM are the skin files for the FM Radio, Wireless Manager, Network settings, etc. All these you already have with your existing WM5 hprw6828. Now if this doesn't work, you can look for an hp wm6 device with an extended ROM.
The Atom series is not an exact clone of the hprw6828. Your device drivers are different, and the programs written may not necessarily work on your ipaq.
If you still want to go after changing your DOC format, please look for bepe's thread on Trinity which removes the DOC from their device. You can study how he removed it. Your process is the reverse.
Please do post your developments. Good Luck!
cheers,
Jiggs
Thanks Jiggs , a guy from 'PdaFans' creat a cab file call HP68X8 EXTROM.cab . I download and run in my phone . Than most of the feature work , Only problem is the wireless manager display in chinese , O2 Album tile become funny word. I think could be cause by language difference , because the guy wn6 is chinese simplify version . And also the rom that the guy use to modify is difference with mine .
I upload the file in mediafire . Please check and let me know what the guy did .
Cheers
http://www.mediafire.com/?6fot3igcjtx
wantat said:
Thanks Jiggs , a guy from 'PdaFans' creat a cab file call HP68X8 EXTROM.cab . I download and run in my phone . Than most of the feature work , Only problem is the wireless manager display in chinese , O2 Album tile become funny word. I think could be cause by language difference , because the guy wn6 is chinese simplify version . And also the rom that the guy use to modify is difference with mine .
I upload the file in mediafire . Please check and let me know what the guy did
Cheers
http://www.mediafire.com/?6fot3igcjtx
Click to expand...
Click to collapse
Okay, I looked at this. What he did is an alternative method of putting the necessary files in the right folder. He created a subfolder named \_QHiddenPartition\ -> the name of the extended ROM. You can do this though, but you can leave out the installation cabs on the extended ROM as this will surely double copy them from ROM.
To do this effectively would mean to recreate the root folder from initflashfiles.dat copying the files from ROM to the subfolder \_QHiddenPartition\. An alternative would be to ZIP it on one file and unzip it on \_QHiddenPartition\ to minimize \Windows files. Too many files in \Windows affects performance index.
This is the easy way out, but you will not have the benefits of the real extended ROM. Also, that our ROM 62.5MB (approx) has limited space to store all the files.
If you will be implementing our ROMs, you will need to modify the MortScript to not look for install cabs in \_QHiddenPartition\
At least with this, hp 6828, you can get to enjoy ATOM WM6 WWE now.
Now, this is real good news!
Thanks Jiggs, at least with that solution , I manage to run your rom for pass two week and the rom not give me much problem.
So now I just wait for my phone back than I will try other way to solve this ExternalRom.
Hope can upload a better rom to HP6828 user soon.
wantat said:
Thanks Jiggs, at least with that solution , I manage to run your rom for pass two week and the rom not give me much problem.
So now I just wait for my phone back than I will try other way to solve this ExternalRom.
Hope can upload a better rom to HP6828 user soon.
Click to expand...
Click to collapse
bravo
think now you will need WinCE cab manager (or similar app) to rebuild the cab file (replace the content with English files)
Hi, Wantat:
I have patch for WM6. I'll upload it to my server for you download
Related
First I appologize for the delay in the availability of this ROM. I was out of town on some business, and the site was down again for a certain time.
To get down to the details, this ROM is the complete set of all three .nbf files, I chose the 2.06 NK.nbf because the cleartype fonts are way better than the 2.02. The radio stack included is version 1.18, and the extended ROM (ms_.nbf) is a customized 2.06.100a, which is a mixture of the extended ROM that dcs posted, the one that came with the 2.06 ROM from the mystery guy and the official Asian 1.60.44 ROM.
I had to remove a couple of the Asian telco provider settings because there was no more space left in the extended ROM since the new versions of the software had larger file sizes than before, and the AutoConfig for Asian telcos alone takes up a lot of space too.
I still included the Extended ROM Viewer and almost all of the newer versions of the software included in the extended ROMs posted by dcs and the mystery guy.
The following telco providers were removed (due to their file sizes being the largest):
1. 1010
2. One2Free
The Socket SDIO Wi-Fi that were available in the previous ROM I posted were also removed due to the lack of space, the SPB GPRS Monitor that was provided as part of one of the extended ROMs posted was also removed. The thumbpad driver is in the extended ROM but does not auto-install, since some times it causes problems, you may install it separately by just clicking on the cab file.
The files removed are included in the .ZIP file so that they may be installed separately if desired.
I would like to thank dcs,mamaich, the mystery man and all other developers who contributed to this endeavor.
RE
Hi ZeroXtreme!
Thank you very much!
Could you post the breakdown of the content here?
Thank you again
Nice work ZeroXtreme
ZeroExtreme is my hero !
Customized ROM Content
NK.nbf = 2.06 (Mystery Man)
Radio_.nbf = 1.18 (dcs)
ms_.nbf = 2.06.100a (Mixed with dcs ms_.nbf, Mystery Man ROM and official Asian 1.60.44)
Extended ROM Contents:
CameraRC141_WWE.sa.CAB
MIDI561.sa.CAB
CprogHook.WM2003_2577.CAB
LoadDialogInit_MS_10150402.sa.CAB
MMS_v2.0.0.13_BA_WWE_0831.CAB
Caller_ID_WWE_RC10.CAB
EmailWiz_v1.01.0003_NL_1027.CAB
IntelliDialer_T-Mobile_WWE_RC10.CAB
IntelliPad_TMO_WWE_B12.CAB
Version_OU.sa.CAB
ClearVue3.4.381WWE_0616_Ozonup.sa.CAB
Extended_ROM_viewer.CAB
sales_service.CAB
hk_html.CAB
BTPSKeyUpdate_003.exe
Autoconfig.txt
Autoconfig.exe
Autoconfig.exe
TPDisable.exe
TPEnable.exe
Also all of the Asian telco settings except the ones listed in the first post that were removed.
it'a Chinese version or English version?
cool thak a lots
Version
vbexpert said:
it'a Chinese version or English version?
Click to expand...
Click to collapse
Its an english version all the way.
Problem...
Hi Zero,
Would like to check with you.. I got this problem. After flashing everything, some how..after booting up.. there is this error.. "Connection Flash Manager" stating "Saved data is corrupted, System will erase all data to fix this error!" But even after i click yes.. the problem will still arise no matter when i softreset. Any idea what is going on?
Thanks
Ranma
Re: Problem...
RaNmA_ said:
Hi Zero,
Would like to check with you.. I got this problem. After flashing everything, some how..after booting up.. there is this error.. "Connection Flash Manager" stating "Saved data is corrupted, System will erase all data to fix this error!" But even after i click yes.. the problem will still arise no matter when i softreset. Any idea what is going on?
Thanks
Ranma
Click to expand...
Click to collapse
I am not too clear about the problem, you flashed your device with the ROM I posted?
This did not happen to me during the multiple times I flashed my device and my dad's device.
I am a bit puzzled here, can anyone help in this matter? ANy similar experiences?
It's so difficult to download! :? I must have tried at least 6 to 7 times. Each time it just stop there.
hi people, i m new to this forum and new to xda2. Just wondering, how do u guys download and load up all the upgrades? hope u pros can give me some pointers.... thanks in advance
Finally managed to download the file. Do I need to do anything before installing the new ROM?
I had once tried to upgrade my unit (blame it on initial enthusiasm, I'd seen all these talks about upgrading to newer ROM versions everywhere on the net that I downloaded an upgrade 2 weeks before I actually bought my device) with a ROM version I had downloaded from O2's UK (The unit was bought from singapore/Honkgkong...Asia ROM presumably)site which naturally and the consequenses were very depressing , I was left with a dead machine on my hands and nobody I knew could be of any help. Anyway that had been taken care of a couple of days back when it reflashed at an authorised service centre.
Well that being that , now that its working fine and now that I see all this talk about windows mobile 2003 SE here I have this irresistable urge to try upgrading mu unit to run SE.
A couple of things before I try to get adventurous
1)How do I do a backup of of EVERYTHING ON MY MACHINE ( Original BASIC/Just out of the box/First time run software included ) So that I don't have to take a week off work just to get the unit reflashed.
2) How do I do a restore all of the backed up data on my device if the 2003SE upgrade doesnt work? From what I have learnt , it isnt anything like a regular computer where just about anyone can format boot and reload windows if it crashes.
I figure a dead PPC is like a regular computer with a dead bios.
I can understand that this post is about 5 times the length of a usual post here but I just had to get all my backup plans in place before I jump off a cliff.
you can use either the x-backup in the xda itself and making a complete back up to your sd or mmc card or make a backup via active sync on the tools menu
where is the download link??
Anonymous said:
where is the download link??
Click to expand...
Click to collapse
You have to log in to see the download link :wink:
I have an xda II australian model, i want windows media player 10, can i use the chinese rom??
This is gonna be my first time to update the ROM of my device so some questions:
Did you include upgrade instructions on the zip?
How do I disable some of the .cab files on the extended rom? I dont like some of them.
Had any probs with this rom on Globe?
~ishtangli
What's the BT software on the new rom? Widcomm or MS?
finally i got the most turn off things i faced in 2005 to back me up to 2003 but after i installed 2005 for the 4th time & desided to stick with it untill i either solve the problem or microsoft will post solution
1. Etisalat Settings for mnet & MMS
(everytime you install them they somehow crash the original DB of messaging where you will not be able to open your mesages anymore untill you do a format
2. and most importantly Arabic reading writing
after long time spent to fix those problems i finally got them working, see screen shoots
yeah ok , great but how u fixed the issues ?
lol am sorry it was a bit hard, & even worse to explain, i writing down something that might help people around doing it once i find an easy way to make it accesseble to people
Rabia said:
lol am sorry it was a bit hard, & even worse to explain, i writing down something that might help people around doing it once i find an easy way to make it accesseble to people
Click to expand...
Click to collapse
Post a cab or tell us what you modified in the registry!!!
Waiting, thanks! :?
Oh something else I noticed the radio rom is 1.08.00, can you dump it?
PC) folder, take a copy of your registry after pasting the file & before softreseting the the device, then reset your device, if it will ask you then if you want to run few DLL files acept all of them, then take another copy of your registry & store it in a differant file, now go to your programs & you'll find arabizer file there in which one of them is english name, another one is arabic as '7ayarat & the 3rd one is arabic letters but mirrored in reverse, this will be always your indication if arabic is now working fine, click on this file, it will load couple of other DLLs but will give you some error message about an AOP????? file, don't mind it, now got to your control panel, (Setting) of your mobile & go to the settings Tab, again it will ask you to load some file.cpl say yes, soft reset your device with a software for soft reset not through the pen, then it will load, if you get an error about some file couldn't be loaded just reset few times & it should work, if you lost you signal in gsm, load the first registry file & softreset your mobile again, it will ask you to load some dll file again accept them then go to the settings to load the cpl file, then reset , if this doesn't work load the second resitry file & do the same proccess untill the file with the names reversed is corrected, now enjoy arabic on your system.
اود التنبية على انني لست مسؤلا عن اي مشكلة تطرأ على جهازك و العملية متعبة جدا
PS. if some get this way working for him i please him to put it in a simplified way because unfortunatly i have too little time to spare on rewriting it in an organized way, but once it worked i had to post it here because this is the best site in the world for PPC's & they deserve the best
Thanks mate I'll give a try later on
now that's interesting , thank u
anyone tried it guys am intrested to know
i think the secret is in the registry integrity & the file loading proccess, if you load the arabic files first after reseting the device they will affect the memory or the gsm loading, specifically the file CPROG.EXE which don't get loaded correctly, actually this is how i found i can fix arabic if i only get it loading after cprog & not before, thats why you put the files manually without the setup file so after you reset the device & when it asks you to load the dll files it will insert it in the registry after loading the cprog not before
guys i heared someone tried it withought backing up the registry & it worked perfectly fine, remaining only is the camera & record button & this should be it for me
i think the camera is the last problem , buttons are working fine 8)
Rabia said:
anyone tried it guys am intrested to know
i think the secret is in the registry integrity & the file loading proccess, if you load the arabic files first after reseting the device they will affect the memory or the gsm loading, specifically the file CPROG.EXE which don't get loaded correctly, actually this is how i found i can fix arabic if i only get it loading after cprog & not before, thats why you put the files manually without the setup file so after you reset the device & when it asks you to load the dll files it will insert it in the registry after loading the cprog not before
Click to expand...
Click to collapse
sadly it didnt work for me,the device kept hangings on the splash screen,I tried it with wireless on and off, i did hard reset 5 times (2 with clear registery option) but nothing worked,I also upgraded to Radio 1.17 but still didnt work,I couldnt find out what's going wrong (I get prompt to overwrite 3 files while copying them into windows folder) WM2005 1.50h, Radio 1.14 then 1.17
well am not sure but regarding the hard reset only do the clear registry hive option without the format,
hi guys!
we are working for the localize Himlaya WM5.0 to Chinese and Japnese.
On the previouse OS, we need Font and registry, and also need wince.nls which support to encoding to our languages.
without replacement wince.nls, the inbox and IE cant encode to ours.
Usual, we got the wince.nls which has our lamguge support from the device of Japanese or chinese, or take from SDK emulator, or make it ourseleves with MS Platform Builder.
Till the version of WM2003se, easy to replce it.
But new OS of WM5.0, replacement of wince.nls can not be effected, even it was replaced firmly. the OS seems to be ignor that!
@On the Himalaya WM5.0, Some version such like 1.6b, 1.6h, 1.6i can get encooding with new wince.nls, but other version of WM5.0, it was not be able...cant find the reason yet.
@On the Blue Angel WM5.0, also it was ignored by OS
@On the Jasjar just we got, also it was ignored..........
We need find some solution of this system which ignore the replacement of wince.nls.
i already work for that more than 5days ........
I think to localize to Alabian, you guys will have same problems.
Example some of you can replace wince.nls, some of you can not get it.
so if you got some information, please exchange it about that, of course we also let you know if we got it!
Thanks guys!
following is our thread about localize to Chinese / Japanese..
You may know what happened on new OS.
http://forum.xda-developers.com/viewtopic.php?t=24781&highlight=
here it is guys
did it
check it out
http://forum.xda-developers.com/viewtopic.php?p=160111#160111
1.6c
yes. I am using WM5 1.60C WWE, I can not replace the wince.nls in rom with new one.
this is again a simplified version of installing arabic in your WM2005, just install both attached cabs in there sequence & everthing should be working fine
PS am not resposible if it crashes your device but so far it haven't crashed min
to Replacement wince.nls
PLS install this cab,
and place your wince.nls onto \Temp folder
then soft reset. you can replace wince.nls
<exactry saying, not relace.enable to read wince.nls from \Temp frolder>
Rabia, what's so different about your arabizer version?
ramram said:
Rabia, what's so different about your arabizer version?
Click to expand...
Click to collapse
its the same as my earlier version but before people comlaint about arabic keyboard not getting installed & the need of using a 3rd party arabic keyboard for it to work, also some people had trouble over writing few files & so HOPFULLY this makes the installation far more easier untill Mr Imaginet company decides to develop a fully intergrated 2005 arabizer
Imaginet already created the arabizer for 5.0, but they didn't release it yet as you can see in the JasJar arabized version, we have a new built of arabizer
SoftBank's known 3G/HSDPA flat-rate packet data connection setting that has hacked from old X01HT ExtROM (user name: "open", password started from "oz...") will be unusable on end of March.
The user name of new setting (available at current ROM that released on end of Nov. 2006) has changed as "opensoftbank", and still no one hacked the password itself.
However, finally I found a way to create the connetcion, using some files dumped from current X01HT ROM.
To create SoftBank's connection that can be used continuously after Apr. 1 2007, you need ROM COOKING as follows, because at least the file WIFIwake.exe should be in the ROM to make the connection.
Step 1. Cook your ROM (add following 2 files in attached ZIP) and update device.
For general instruction of Hermes' ROM cooking, see the Wiki and related resouces.
addfile Out.xml
addfile WIFIwake.exe(A.xml and Initial.exe aren't needed)
Step 2. Install ConnSBM.CAB (included in ZIP)
The connection will be created, however password entry is still empty at this moment.
Step 3. The files are in ROM, so you need to set to "Menu -> Show All Files" on File Explorer to make ROM-attributed files visible (or, use similar option for 3rd party's file explorers, such as Resco or GSFinder+).
Step 4. Run WIFIwake.exe from \Windows folder.
The password will be created into the connection made by ConnSBM.CAB at Step 2.
To confirm whether success or not, check the connection "Internet > SoftBank", and click "Edit -> Next -> Next". If "****************" is shown at the Password field, the password has been successfully created.
If the password is not created, maybe WIFIwake.exe (non-ROM attributed) exists on \Windows. After running Initial.exe, WIFIwake.exe is copied onto storage from ROM. You need to delete it before retry, if you have run Initial.exe before install ConnSBM.CAB or lost setting.
BTW, I guess this way can be applied not only Hermes, but also Universal and/or any other HTC devices those can edit OS ROM (at least, I have successed on WM6 for Universal).
Enjoy AT YOUR OWN RISK !
Great work, a lot of japanese people was pursuing this for long time! Congratulations
Awesome, I had been doing this same thing for 3-4 days no and getting nowhere.
Mad props to you.
I have the Hermes and I'll be going to work as an engineer in Japan from April. I have installed the DoCoMo ROM for the moment (simply because out of the two ROMs, it's the one to have Bootloader 1.0.4, I have no trouble reading Japanese, and I need a Japanese input that's a bit more stable than Bagoj's IME).
However I'm wondering exactly what this thread would enable me to do... I'm planning on getting a subscription with either SoftBank or DoCoMo (whichever provides SIM cards/accepts to register a foreign phone).
If I get a SoftBank subscription, would this enable me to somehow cheat the subscription on getting more Internet for free? Or if that's wrong, what exactly would it enable me to get?
I haven't looked into the phone subscription system at the moment, but soon will. Whatever this thread exactly means could be a huge help in any choice I would have to make.
Many thanks for your help in advance,
Cheers,
Yannick
Hmm, I get the connection added but when I try to run the initial.exe from Windows is doesnt do anything. Using 3DES Custom.
@itamae
What Does The File intial.exe Do Exactly?
@jokinawa
How Is The Connection Created Without Running initial.exe?
Cheers
mousey_ said:
@itamae
What Does The File intial.exe Do Exactly?
@jokinawa
How Is The Connection Created Without Running initial.exe?
Cheers
Click to expand...
Click to collapse
I finally got the program to work. Funny thing is that I could nt cook a ROM with the initial.exe in it of it would not install. I was using the Rom Koch 0.99 release. So if I just copied the files over to a fresh install of a ROM it worked but I had to click initial.exe about 4-5 times before the "loading" graphic appeared.
I am assuming that it either installs a dll with the password encoded in it of he knows the password and didn't want it to become public. Initial.exe puts the connection password in the connection that ConnSBM.CAB creates.
Without the initial.exe running you have the connection with a blank password.
Files
Seeing as how none of these files are in the ROM itself is there any way you can post a list of file to help us re-create the process?
Well done !!!
Finally we'll be able to upgrade to XDA Live of Crossbow without fearing to lose our flat rate !!
Alcibiade said:
Well done !!!
Finally we'll be able to upgrade to XDA Live of Crossbow without fearing to lose our flat rate !!
Click to expand...
Click to collapse
By the way anybody courageous and kind enough to cook it with the latest WM6 version and post the ROM ?
I am trying to do that but I am learning from scratch... and it will probably take me a huge amount of time
Actually the best would be to compile it with some utilities to be able to read Japanese fonts and input Japanese...
This is wonderful news indeed! Now we only need a way to cook Japanese fonts and stable input into new ROMs and life would be perfect...
Great!
Alcibiade said:
By the way anybody courageous and kind enough to cook it with the latest WM6 version and post the ROM ?
I am trying to do that but I am learning from scratch... and it will probably take me a huge amount of time
Actually the best would be to compile it with some utilities to be able to read Japanese fonts and input Japanese...
Click to expand...
Click to collapse
Every time I cooked the "addfiles" the initial.exe would not run properly and create the connection. If I cooked the other files minus the initial.exe and the cab it still wouldnt create the password. I could only get it to work by copying the files after flashing. Anybody get it to work in a cooked rom?
Alcibiade said:
By the way anybody courageous and kind enough to cook it with the latest WM6 version and post the ROM ?
I am trying to do that but I am learning from scratch... and it will probably take me a huge amount of time
Actually the best would be to compile it with some utilities to be able to read Japanese fonts and input Japanese...
Click to expand...
Click to collapse
mmmh cooked the latest LVSW and it s working great
Thanks, thanks thanks a lot for this itamae !!
Alcibiade said:
mmmh cooked the latest LVSW and it s working great
Thanks, thanks thanks a lot for this itamae !!
Click to expand...
Click to collapse
@^#)(!^@$ MMS Lite doesnt work
More EASY way has been found!!!
Another Japanese SoftBank user has found more easier way to add the new SB connection.
Now you DON'T need any ROM cooking. Please move to new thread.
http://forum.xda-developers.com/showthread.php?p=1172318
Alcibiade said:
By the way anybody courageous and kind enough to cook it with the latest WM6 version and post the ROM ?
I am trying to do that but I am learning from scratch... and it will probably take me a huge amount of time
Actually the best would be to compile it with some utilities to be able to read Japanese fonts and input Japanese...
Click to expand...
Click to collapse
posted here, OS also Japane,,どうだ！参ったか！
http://forum.xda-developers.com/showpost.php?p=1181259&postcount=48
I am not sure to understand the "cook" the ROM... are you talking about the OS part? The Radio or the Extended rom ?
Cheers
help
great to hear that u made it work. but still i cant get the softbank ap settings work
i got The connection created but however password entry is still empty .i tryed the way u have told. is there a easy way out. i use a o2 xda exec.
i would be really be happy if u could let me know
thanks
take care
suren
ysi said:
great to hear that u made it work. but still i cant get the softbank ap settings work
i got The connection created but however password entry is still empty .i tryed the way u have told. is there a easy way out. i use a o2 xda exec.
i would be really be happy if u could let me know
thanks
take care
suren
Click to expand...
Click to collapse
after copy Out.xml & WIFImake.exe to /windows folder, click on WIFImake.exe then the passwd will be inserted there!
thanks for the mail but still i did not
may be some thing wrong with my rom
thanks
Simple steps on howto
1. download the kitchen Download
2. download Prophet Touch X rom Get it here
3. extract Kitchen and Prophet Touch X to separate folder
4. Place the OS.nb from Prophet Touch X in the rom folder of the Kitchen
5. run Buildos.exe and choose what to include (the marked apps are the once that are in Prophet Touch X) press the green play button and wait for it to finish
6. run CreateROM.bat (if there is any error the you have included to much in the Buldos prosess)
7. if there were no error the new OS.nb is in the temp folder move it to the Prophet Touch X folder and overwrite the os.nb in it
8. flash any step 1 WM5
9. now Flash your new rom within Prophet Touch X folder
if everything is done right you should have your new coocked rom on your Prophet
I have put all the things that should not be removed into the SYS folder so do only make changes to the OEM folder till you know more about cooking .
replace the HTC Audio Manager with this one
View attachment OEMAudioManager.zip
New HTC Album with folder option
View attachment HTCAlbumFolderOption.zip
Extras and links
I'll upload some addons for the kitchen later on as I've made more OEM packs
You can also search for oempacks to include but be aware that some OEM packs are device depented
Some cool tools that I use but have not included in kitchen You'll need to understand what they do before using them
HyperCore Kitchen cool for dumping roms and building ( I use it for dumping)
this is great.. awesome.
Great job Gullum. Now guys, we all should start frying Hokienmee or Char Kueh Teow (both chinese cuisine)
geney said:
Great job Gullum. Now guys, we all should start frying Hokienmee or Char Kueh Teow (both chinese cuisine)
Click to expand...
Click to collapse
I like both of them..LOL..
Really love this kitchen...
Thanks man, you are great!!!
It'll be even better if have a list of what those things really for. I do not know which box to check and which one is not
Maybe I'm too new for 'cooking'
geney said:
It'll be even better if have a list of what those things really for. I do not know which box to check and which one is not
Maybe I'm too new for 'cooking'
Click to expand...
Click to collapse
hold the mouse over one of the options and there should show and explaination for most of the items
good news
i'll try it
for every change in X and flashing it, is it always necessary to do step 1 again (wm5 flashing) ?
When I do hard reset and at the "tap screen to go on" point, I could start flashing X too ?
What I mean, is the complete rom exchanged when I flash X, or do some parts from wm5 or old X (IX, VIII ....) remain ?
I've try to cook today.. BUt seems something is going wrong...
Better I flashed it back to the original touch X ROM...
I also had some bad luck with cooking.
I did everything gullum said, flashed 'new' TouchX, did hard reset and then when its time to see welcome screen and 'press any key.....' there is blank white screen! Nothing happens no matter which button i press! Any ideas?
mcupurdija said:
I also had some bad luck with cooking.
I did everything gullum said, flashed 'new' TouchX, did hard reset and then when its time to see welcome screen and 'press any key.....' there is blank white screen! Nothing happens no matter which button i press! Any ideas?
Click to expand...
Click to collapse
I did the same think.
At my case, i have enter today screen.. But I think, its programs don't install clearly.. (hard reset don't help either.)
The first screen is the same one as you.. The white one.. Maybe you should to try ask Gullum again..
I just flash back to Touch IX with another Ext ROM. QuickMenu in that ext.ROM
thanks gullum
I would like to translate this rom to Portuguese can you give some advices? our some tutorial to do that, please? can i do that with this soft?
best regards
thanks (for this perfect kitchen) gullum ,some 3 questions i have :
1.>how to get oem or make one ,and
2.>how to get .dsm , .rgu files of my favorite software . and
3.>how do i make registry changes prior to build os are they automatic
Note :ext_rom files attributes should be read only since its like that in original rom so i made them read only(i think its healthy for system files any virus won't be able to modify it unless the file needs to be appendable updateable it should be read only),plus i deleted alot of thumbs.db files lying in many folders (about >2mb) just to clean oem folder files off thumbs.db i know winxp might be making them all the way .
i corrected audio manger with this kitchen (its gr8),i can't seem to solve camera album (have solved solution given below )problem ,it seems to have come back you know i can't use gestures , what to do ,any reg setting solution.
Edit : **corrected** the setting in reg hklm\software\htc\htcalbum\cacheserial to 2130706432
and hklm\software\htc\htcalbum\default_viewer to 0
if it still don't get solved set first 11 enteries (h_enable to v_pos) value to 0 in
hklm\software\htc\htcalbum\touchscroll\htcalbumclass
i'll try to provide a cab but this forum has alot of intelligent members
BuildImgfs
whatever I include in the buildos I am facing the same error when I try to create rom; something about BuildImgfs
any help guys!!
ma3ayta said:
whatever I include in the buildos I am facing the same error when I try to create rom; something about BuildImgfs
any help guys!!
Click to expand...
Click to collapse
2 reasons 1.> i hope you are pressing play(top left in build OS)button after whatever you choose,with what ever you want in it.
2.>your file size has to be limited its almost full with this kitchen so you have to remove some item like voice dialing (which i seldom use) or some other item removed before you add some item since size dependency is very important here ,and later run create rom .remember you cannot select everything because of space limitation .
Hello Gullum
I'm trying to do very basic thing adding Windows Live package into the OS.nb but it fails during CreatROM.bat. At BuildImgfs.exe the application BuildImgfs.exe crashes and show the error message and whether to send a report to MS or not (I don't send...).
I just directly add Windows Live to your OS.nb. Is it already fully loaded? Should I remove something before?
question with task manager
something is wrong with task manager.
in control panel ,its setting doesn't work!
Same problem.
Whatever i select in buildOS, BuildImgfs crashes.
Last records is CreateROM.bat window is:
Processing "Painting.gif" as file
Processing "S5K3BAFX.dll" as file
Processing "3aca900a-0834-11dc-8314-0800200c9a66.dsm" as file
Processing "c7dbe475-1d17-4fbf-a63e-af6dc042569a.rgu" as file
Processing "c7dbe475-1d17-4fbf-a63e-af6dc042569a.dsm" as file
Processing "-жE+-A+?.txt" as file
I think reason in strange file name -жE+-A+?.txt.
BINGO!!!
I Found this file in Prophet Touch kitchen.
\\OEM\Quickmenu\-жE+-A+?.txt
Just delete it before kitching.
Hi guys and gals, after a lot of searching tweaking and flashing at last got a working STK for Atom Exec. Its basically a work around sort of a thing but u need a working STK don't u . Now most of u will ask what is STK, well STK is an application which is responsible to start a program from your SIM card. Normally this is provided by the SIM card provider or if u use Super SIM (a SIM having more then one number in it). OK now for the actual thing do the following and mind you this is for ROM COOKERS only and not for normal cab loading operation (sorry for the noobs like me):
Remove the "OEM_MySimTKit" folder from OEM u don’t require it. Place the attached "SIM_TKit" folder in the SYS folder of ur Kitchen). Flash the ROM and viola STK is working.
You don’t require NetCF for this also and can save valuable space with almost 6.7 MB of free space on ROM without NetCF (Load it in SD card after flashing for other programmes to work). I don't know who made this "SIM_TKit" (most probably dcd so big thanks to him) and also Thanks to all XDA members.
http://asapload.com/122822
"Remove the "OEM_MySimTKit" folder from OEM u don’t require it. Place the attached "SIM_TKit" folder in the SYS folder of ur Kitchen). Flash the ROM and viola STK is working."
sorry bro, i'm new. i want to ask some.
where i can find the OEM n the SYS folder? do i have to update/change the rom i'm using?
PM me Please, i'm so helpless
by the way there's problem with the asapload
I think this thread will be very useful if it could be moved to Atom Software,.