connections & upgrading problems - MDA II, XDA II, 2060 ROM Development

hello im new here,
the problem i have is that my device will not sync/connect with windows/activesync, it synced once recently, i was able to explore the device but several minutes later the connection died.
i think there may be some setting preventing syncing/usb connection.
i cannot change any settings since theres a startup program that wont let me close it, but if i press the calendar button that appears briefly.
http://www.pdadb.net/index.php?m=specs&id=305
this is my device, i have tried himaupdate and the latest version of hima but i get connection errors, once briefly i got it to go to the upgrade screen where i get to see the version from and to ..
the device is connected by cradle and if i pull it out and stick it in active sync reacts but then doesnt connect.
i have tried moving, holding, adjusting, wiggling the device in the cradle thinking it might be not touching the pins but no help.
what i think i need is to eith disable startup scripts or have some sort of brute flashing utility to upgrade it. thing is i dont know ebough about these devices to try anything more adventurous without help/assistance.
please can you help me out?

did you put it in bootloader mode before trying to upgrade ?
if not do so

how would one put it in boot loader ?
i am pc savvy not pocketpc savvy
thank you

http://wiki.xda-developers.com/inde...wx20.dox20.Ix20.enterx20.thex20.Bootloaderx3f.

hey great faq, im one step closer i think,
i needed my gf to help me with the vulcan death pinch.
this is what i see, and my device is recognised by windows as a new usb device that i have no drivers for...
i cannot find any drivers on the manufacturers site

let it use internet ms site as possible search for drivers then it should see it as some ms generic device
which can recieve flash from the tool

Rudegar, i have tried the windows update for drivers and other places online including the ppc_usb10.exe, and still no luck.
i bought myself an sd card is there any way of flashing from the sd card using the magical bootloader ?
---
well i have copied some files to my sd card, and inserted the cared into my device booted into bootloader mode,
Code:
FlashUpdateUtility.dll Application Extension 76 KB 16/06/2004 11:12:16
MC50.TXT Text Document 384 B 12/09/2006 18:07:02
MC50wseApp00B.hex HEX File 2,172 KB 12/09/2006 16:14:36
MC50wseIPL06270500.hex HEX File 194 KB 28/06/2005 12:23:54
MC50wseOS12120500.bgz BGZ File 15,332 KB 13/12/2005 01:03:20
MC50wsePlat019.hex HEX File 4,134 KB 12/09/2006 16:13:34
MC50wsePt64M003.hex HEX File 10 KB 11/01/2005 09:59:54
OSUPD50.EXE Application 37 KB 13/05/2004 10:50:18
OSUPDATE.EXE Application 4 KB 03/11/2004 03:41:56
then i executed all the .hex files when given the option, after that my device became windows ce, with almost no other than basic software installed.
i would like to know where i could find hex files for windows mobile 2005, or if i can extract hex files from "nk.nbf"
thank you,

Related

SX56, problem during rom update

Hi
Started program - found SX56. Message "Upgrading - will take about 5 minutes"
on pda. Then it said that it had a problem with the USB or COM connection, and
to fix it in device manager. I opened Device Manager, and checked that all the
USB and COM ports were enabled, which they were.
By this time, the unlock software and ActiveSync had stopped running. The pda
was still stuck on the "Upgrading - will take about 5 minutes" screen. Since
the configuration has changed, ActiveSync will no longer recognize the device,
and will not sync with it. Your software will not connect until ActiveSync does.
All that comes up is the "Upgrading - will take about 5 minutes" screen. there
is no other functionality to the system.Hard or soft resets make no difference.
Active Sync doesn't work. The PDA has changed its configuration, so active
Sync doesn't recognize it. When I plug it in, Active Sync sees something, but
can't even tell that it is a pda, and I can't even set up a new connection with
it. let alone use the old connection.
Can anyone help? is there a way i can reinstall active sync or is there another way to fix it? please help
You will need xdatools, sd card, card reader/writer and rom file from kitchen for sd card flashing. Unzip the rom after download, start xdatools on your pc, choose the unzipped rom file as source and the drive letter for your sd card as destination from drop down menu, once the card is programmed insert sd card to phone, push reset while holding power, when prompted you then push the action key which is centre of 4 way rocker buttons. Once flashed push the unscrewed stylus into hole next to headphone socket, push once only, wait one minute push once more, this will work as long as you dont have a problematic version of bootloader on your phone. Good luck.
System is entirely backed up onto SD card.Can't use SD card. Can't use PDA.
PDA is still stuck on "ugrading - will take about 5 minutes". It apparently has
no operating system in ROM. No difference with hard or soft reset - comes back
to same screen, no function in PDA.
HELP PLEASE
I think you misunderstood, a normal backup is no good, you need to program an sd card with a new rom, when this is placed in your xda and soft reset it should reprogram your phone with a new rom. You are correct when you say it has no rom, the method I described should restore your phone to a working machine. You do not need a rom to reprogram using bootloader/sd card method, try it and see.
You will need xdatools, sd card, card reader/writer and rom file from kitchen for sd card flashing.
Click to expand...
Click to collapse
Okay, so can I basically use the newest ROM which also unlock the device too?
You will need to use either xda developers special edition rom to unlock or include the unlock program from the kitchen in a 2002 rom, you can then upgrade to wm2003 if you wish, you cannot unlock under wm2003 so you must use special edition or kitchen rom based on 2002 first.
I am sorry if i keep asking you questions.
I do have the xda special rom, ive tryed using it but it caused the problem i do have right now.
i did download xdatools by jeff. i cannot run them though.
Could you describe step by stef of what i need to do.
i.e. do i need a complete NEW ROM, or can i just transfer the xda special rom to my SD card and then run it to restore my device?
But i guess not, else you wouldnt have explained what i need to do.
Thats the error i get when i try to run xdatools. (I dont understand the install note)
"INSTALLATION
From the source + exe distribution copy OsImageTool.exe and itsutils.dll
to the programme A directory as created by unpacking
jeff's-exe (http://cuba.calyx.nl/~jsummers/XDA/) to a directory in
your "Program Files" directory. Then run 'OsImageTool --register'."
IF you unzip the files you already have both of those files in the folder.
THANKS FOR YOUR HELP
You have to install ActiveSync.
You can get it diretcly from Microsoft for free....
HTH
Stefan
. I was able to locate the NK.nbf file. I ran the XDA OS image tool, to put the OS on the sd card, from the NK file. That apparently succeeded, but it is hard to tell. After loading the OS, when I take out the sd card, then put the sd card back into the sd card reader, it can no longer read the sd card. I can format the sd card again, using my camera, so the sd card is not destroyed.
Wher I put the sd card in the SX56, there is no problem, but there is no success.
Pushing soft reset alone does nothing. Pushing the power button alone does not turn the machine on or off, and does nothing.
Pushing power and soft reset at the same time, gets me the “Wallaby Bootloader V5.15” screen. It first says “wait”, and then says “GSM OK”. It then does nothing else, and doesn’t prompt me to do anything else. If I push the action button, I get “DIAGNOSTICS GPRSA 20324e4”. From there, I can scroll up and down, and test the RAM, Display, battery, USB, etc – all items tested seem OK. There is nowhere to go from here – all it does is test the pieces.
After that, if I push the hard reset (the one that disconnects the battery), the power goes off, and the screen is dark. This is the only way to turn the machine off at the moment. If I push hard reset again, it comes up with a screen full of lines, with two blank holes in it (see attached file). From there, none of the buttons do anything, except hard reset (which turns the machine off again), or soft reset + power, which brings up the bootloader screen again.
have the siemens ROM. It will not work with the cradle, because it cannot find the pda if Activesync can’t make a connection, and loading it onto the SD card does nothing new – both results are exactly the same as with what described above.
any suggestions?

System files moving not permitted

Hi to everyone.
Before this HTC device I had others and also had a Motorola Mpx220 (WM2003 SE).
I was used to move the files within "\Windows\Start Menu" (mostly .lnk files to installed programs) into newly created subfolders, to be able to use and/or access the function I needed in a faster way.
I've tried doing the same on this WM5 device, but everytime I try I get an error message reporting it is not possible (File Explorer has greyed out options to cut and/or copy, while TotalCommander just reports it's not possible to "overwrite" ???).
Does anyone have an idea of how this can be done (registry ???) ?
Thank you.
Ciao
Here is the solution...
Hi Mix, it's Mix answering (yes, I'm the same person...)...
First of all I would like to thank you ALL the people which knew the solution and were fighting to answer to my doubt...
You were so many, I wonder why the message has been read times and so many answers arrived: 0 (yes, ZERO).
Anyway, I came across the solution myself, by chance...
The problems seems being the smartphone versions of WM5 being protected against file modifications. This protection extends also to some files execution and to certificate installations (hence some problems may arise when connecting to an Exchange Server for syncronization).
Some tools are needed to remove this protection, and some experience of registry modification is required too (I will not help anyone beside what is in this message and I take no responsability for any mistakes and/or troubles you may produce or face).
First of all you need a special version of RegEdit (the tool from PHM): you should find an HTC digitally signed copy of it called RegEditSTG.exe.
Look around for it: there are many forums around which do hold a copy of it.
Place it in your phone's memory, not on the MicroSD card...
With this tool you should change the following values:
HKLM\Security\Policies\Policies\00001001 = 2 => 1 (RAPI)
HKLM\Security\Policies\Policies\00001005 = 16 => 40 (Cert)
HKLM\Security\Policies\Policies\00001017 = 128 => 144 (?)
The first is the value you will find, the second is the value you should enter. The third line has a question mark because someone says it should be made, someone not... It's up to you. I made it.
Then you should find another tool (with the same above method) called SDA_ApplicationUnlock.exe which has to be run on your desktop PC with the phone already connected with USB (and possibly with ActiveSync not in the middle of a sync...).
Once you run this, you will get a message that the unlock took place (if not, it may be the first operations did not complete well).
Disconnect your phone from the USB cable and power cycle it (switch it off and then on again).
Opla'... the phone is not APPLICATION UNLOCKED and you will be able to move file around the directories as I was looking to when I first posted my message.
Now I have a very quick Start Menu, as I wanted.
Please, be aware that this operation hacks the security policies of WM5 and then any other application which may be dangerous can now run on your phone.
If you wish to stay on the safe side, it could be useful to restore the registry settings to their original values, but I do not know if this could cause other problems, since I didn't on my phone.
I actually double check every single file by myself before launching it and I do not run anything which I'm not sure it is safe.
So, pay attention... (you have been warned...).
Hope this helps someone else out there.
Ciao
Thanks for the tips mate! I was searching around for the same problem.
Can a hard reset put all the files back as in the old WM2003? I'm asking that 'cause if you look at the windows directory, many exe and dll files are repeated, with a different code. I guessed they are for the many different languages the phone support and the code is the country code. Maybe when you switch from one language to another those files are renamed so you have the correct exe and dll for the language you need...
If I can erase all the files I don't need (I will never change the language or maybe have only italian and english) I can save lot of space.
Am I wrong? Was that ever tried before?
vbi said:
Thanks for the tips mate! I was searching around for the same problem.
Click to expand...
Click to collapse
;-) I knew...
Can a hard reset put all the files back as in the old WM2003? I'm asking that 'cause if you look at the windows directory, many exe and dll files are repeated, with a different code. I guessed they are for the many different languages the phone support and the code is the country code. Maybe when you switch from one language to another those files are renamed so you have the correct exe and dll for the language you need...
If I can erase all the files I don't need (I will never change the language or maybe have only italian and english) I can save lot of space.
Am I wrong? Was that ever tried before?
Click to expand...
Click to collapse
In order:
- Yes, I suppose a hard reset of the device completely restores the original factory settings, hence, the device will appear as "brand new".
- You're right: all the localized files present there are just to be able to swithc to other languages (maybe following user's settings and maybe also following user's SIM settings too...).
- Erasing the unused files may appear as a "space saving" job. It is not. First of all you will not be able to remove ROM resident files, but provided you could be able to do this, you will not be able to use ROM space as you intend...
Finally then, it's completely unuseful to try to remove them, just a waste of time trying...
Ciao
Thanks Michele.
Are you sure the windows directory is in ROM?
I always tought ROM was only to store the "disk" image when you hard reset the device. I was so for the Qtek S100.
vbi said:
Are you sure the windows directory is in ROM?
Click to expand...
Click to collapse
Yes it is. On the fact that it is then copied into RAM, well, this is a tecnique which was used up to WM2003 SE devices.
Starting from WM5 devices MS somewhat changed the behaviour of the whole system, hence I'm not then so sure.
Indeed, I have never been sure of anything, beside death, so you can imagine...
I'm not really so "expert".
Having used an MPx220 for over one year (with all its limitations, but exploiting it very much), using a WM5 device now is a much more relaxed experience (faster, more realiable and less troubly in terms of memory).
Just MHO
Thanks Mix - i followed your directions and it worked.
Got my QTEK (running i-Mate ROM) Application Unlocked

error getting connectintype

hi ppl,
today I ve made rom with the romkitchen, it was 2003 final and everything went ok, phone was functional until I used to try to install some newer versin of the programs I previously included in the rom. That didnt work (of course) so I decide to put another rom without those programs so I can install newer versions but when I run the romkithen exe computer report
in the dos window
error getconnectiontipe - unspecified error
error getting connectiontype
and the program for the patching report that he is trying to get the data from the device and after that he reports that
"cannot execute the remote communication program, please make sure that the usb/serial cable is properly connectes"
of course cable is connected, device syncing with the active sync and the icon is green, used to try to soft reset pc and pocketpc, to hardware reset pocket pc, to connect it to other pc and patch there, to install active sync 3.7.1, to reinstall active sync 4.2, to reinstall usb drivers on the pc, to put sim card and sd card out and to patch then... nothing helped...
what can I do ? is that due to the windows 2003 instalation on the pocket pc (had same version on other wallaby without the problems) ? can I solve that some way ?
I ve read before that patching can be performed from the SD card so I found the xda tools and osi image tool but couldnt found rom nd1 file anywhere (was stupid and didnt make copy of my previous rom)... which rom can I use just to enable USB connection and after that I ll patch it with the "normal" rom from the rom kitchen...
Ive checked those roms http://wiki.xda-developers.com/index.php?pagename=ROMVersions but didnt find any nd1 file in the files I ve checked, can I use those roms with osi image tool eventually ?
which one ?
Lots of questions ... Sorry people ...
I can use it in this condition too but I d rather have an opportunity to flash it to some other version maybe.
Best regards to the community !
I think it´s just the problem that the ROM prohibits flashing via EXE-file. You have to flash via SD-Card.....
You find the ROm to write on the SD-Card in the EXE-FIle. Just extract the exe using winzip, and then you will find it in a subdirectory (normally english, or dependent on the ROM-Language...)
Stefan
Thanks a lot Stefan, so I can use some ROM from the page http://wiki.xda-developers.com/index.php?pagename=ROMVersions ?
Any advice which one should I take please (Im not using any of the operators noted there, just looking for some rom that will function ok) ?
Thanks m8 !
Yes, you can take any rom of it. Mostly the T-Mobile prohibits flashing via EXE-File, but Flashing via SD-Card is more secure in my opinion. So i´ve done 99,9% of my flashes via SD-Card, and you can believe me, i´ve done it a lot of times.....
By the way, which software has to been updated in my romkitchen?
If you give me the hints, i could try to update them....
Stefan
thanks a lot for your time and advices Stefan !
Its not a huge problem but probably we share same opinion - most of the tech guys like to see that everything work fine, if something doesnt work then we re not satisfied.
Basically problem is that I included spb pocket plus in the rom and therefore I cant install spb weather which demands pocket plus v 2.5+ and version in the rom is 2.0. I cant upgrade it coz its in the ROM, used to try to remove it from the registry but no luck, used to install latest spb diary coz the spb weather also work with the diary but looks like that the first thing weather perform is checking of the pocket plus version and if the version is not 2.5+ it stops the installation...
Probably for the most of the people spb weather is not a reason for loosing couple of hours in trying to change rom in wallaby but as I ve mentioned I like the things that work 100%, if some electronic/computer stuff work at 99% that usually bother me. Stupid - I know but thats the way it is.
Im going to patch it thru the SD, thanks again for the all your efforts now and before.
GL & HF !
Sorry...
Still need help, using the OSI tool I copyed NK.nbf file from 4.02.04_eng rom to "XDA SD Card Slot -unknown size" - coz I dont have card reader/writer at the present moment so I tought that I can put the file via the cradle connection while the card is in the wallaby...
Checked the card from the wallaby file explorer but nothing is on the card, since I had expirience with direct writing to c64 and amiga disks writing I assumed that file could be written directly to the card without OS instructions but after the reset of the wallaby it report that card shoud be formatted to become writable... Is that normal, or I should wait for the card writer reader to put the file properly to the sd card ?
If possible please help me with the link for the OSI tool patching, I cant find it anymore, checked thru the site but no luck, dont know what I have to press so the wallaby read the rom from the sd card.
Thanks Stefan & all others
success !
No help needed, I ve made it...
So dont have any fears as Stefan told unpack the rom from the self extracting archive and run osi tool, in the source field set nbf as a file type and then select extraced rom.
As a target you can set card reader/writer and also you can put the SD card in the wallaby as I did. Set the XDA SD card as a target in that case.
Its normal that after the writing (no message that writing is successfull, when it is finished OSI tool will stop) SD card become unreadable to wallaby.
Then perform actions as noted in SD card patching info
http://wiki.xda-developers.com/index.php?pagename=Wallaby_HT_FlashSD
Hold the power button and soft reset. You'll be taken to the below screen:
SD DOWNLOAD
Card Type:
CE OS & BOOT
Press action to Download
Or
Press REC to Exit
Press action to download and it will start the download/restore from the SD card.
Follow the on screen instructions once its "Completed" which will consist of a " Hard Reset"
Action button mentioned above is middle button - "D PAD"
Works like a charm, now I have o2 win 2002 and later I ll patch it to 2003 SE again but without pocket plus.
Thanks Stefan and community !

[Q] [GOLDCARD] Windows rewrite from 0 - 170 and undo GC?

I noticed after making my goldcard with HxD, that when I replugged into USB to see if it was recognized, and opened it on Hxd, the Hex for 0-170 was different from the goldcard.img that I just wrote.
Can anyone confirm if that is a normal behaviour?
I'm on W7 Professional 64bit.
You want to make a goldcard? I used this tuto: hxxp://android.modaco.com/content/general-discussion/305672/creating-a-goldcard/
Have doubts? Please ask there. Or use the search.
I now tried to remove the sd card after writing with HxD, without properly disconnecting it,
and it seems to got persistent. ( although my GC still don't work, or my HD2 is really ****ed up )
I guess when you do the safe remove windows rewrite the changes done with HxD?
That tut is for android device goldcards, and the image generator webpage it links to is for android or WP7 devices.
Even though you may be running android, it is still a winmo phone.
Have a read
The process is about the same, except there are no free pages offering to make hd2 goldcards. Send me your CID (card is 4gb or smaller, right? 2gb for preference,, wont work on bigger cards, dont reverse the digits or any of that, just the cid as it is generated) and an email address and ill make you an image.
Oh darn, saw this too late, sent the device to repair... But the technician isn't having much luck, so if I get the device back still half-bricked, I'll surely want your help!
Thanks!

Attempt to return to WM 6.5 and error "loading ..."

Hi, I will describe your problem in a new topic, because I see that it is broader.
Well, on Friday I bought a HTC HD2 wgranym WM 7 Unfortunately, this system will not even suitable to use, so I decided to upload, and in fact you go back to WM 6.5. I found the forum two ways by dropping LEOIMG.nbh file directly to memory card and a second by installing ROM when connected to a PC.
I bought a memory card reader and format the card. I threw the downloaded file from here: Multiupload.com - upload your files to multiple file hosting sites! Do not give it any more with this phone .... Charter installed a phone and pressing the handset, which is used to activate the phone and the VOL DOWN I switched to a mode. First there was a color screen with the specified data to HD2, but then came the white screen that says "loading ..." and nothing happened for an hour. Perhaps this file does not match my HD2, or he do not know.
The second method seemed to me an alternative and downloaded from the official HTC ROM, giving the serial number. Was surprised that it was a ROM for Norway. I do not know well past the phone, so I do not exclude the possibility that the phone is from Norway. I downloaded the ROM, I downloaded the ActiveSync. But I do not know why when you plug the phone activesync can not connect with them. He writes the message "The device was not detected. " I wanted to try and install without ActiveSync, but the installation failed.
I have no strength, like I'm doing everything ok, but I can not fix this for anything WM 7
Sorry for language errors, I used google translate to translate.
Any help thanks in advance.
okay first of all, if your using windows 7 then you dont need activesync. You need "Windows Media Device Centre"
Also, try turning on the phone whilst holding the volume down button. That should take you to bootloader. (3 colour screen).
You should see the word "serial" at the bottom of the screen.
Connect via USB and wait for the drivers to install.
The word "Serial" should then change to "USB".
Then you can flash a ROM via USB. If your phone is network branded then you will need to flash the correct ROM from the HTC site.
czarinio said:
Hi, I will describe your problem in a new topic, because I see that it is broader.
Well, on Friday I bought a HTC HD2 wgranym WM 7 Unfortunately, this system will not even suitable to use, so I decided to upload, and in fact you go back to WM 6.5. I found the forum two ways by dropping LEOIMG.nbh file directly to memory card and a second by installing ROM when connected to a PC.
I bought a memory card reader and format the card. I threw the downloaded file from here: Multiupload.com - upload your files to multiple file hosting sites! Do not give it any more with this phone .... Charter installed a phone and pressing the handset, which is used to activate the phone and the VOL DOWN I switched to a mode. First there was a color screen with the specified data to HD2, but then came the white screen that says "loading ..." and nothing happened for an hour. Perhaps this file does not match my HD2, or he do not know.
The second method seemed to me an alternative and downloaded from the official HTC ROM, giving the serial number. Was surprised that it was a ROM for Norway. I do not know well past the phone, so I do not exclude the possibility that the phone is from Norway. I downloaded the ROM, I downloaded the ActiveSync. But I do not know why when you plug the phone activesync can not connect with them. He writes the message "The device was not detected. " I wanted to try and install without ActiveSync, but the installation failed.
I have no strength, like I'm doing everything ok, but I can not fix this for anything WM 7
Sorry for language errors, I used google translate to translate.
Any help thanks in advance.
Click to expand...
Click to collapse
You need to take that official ROM, rename it from .exe to .zip, and extract the LEOIMG.nbh file. Place this file in the root directory of your SD card and then go into bootloader like before. This will flash the stock ROM onto your device. Make sure the SD card is fairly low capacity, 2 or 4 GB seems to work best, and formatted for fat32.
Good luck!
czarinio said:
Hi, I will describe your problem in a new topic, because I see that it is broader.
Well, on Friday I bought a HTC HD2 wgranym WM 7 Unfortunately, this system will not even suitable to use, so I decided to upload, and in fact you go back to WM 6.5. I found the forum two ways by dropping LEOIMG.nbh file directly to memory card and a second by installing ROM when connected to a PC.
I bought a memory card reader and format the card. I threw the downloaded file from here: Multiupload.com - upload your files to multiple file hosting sites! Do not give it any more with this phone .... Charter installed a phone and pressing the handset, which is used to activate the phone and the VOL DOWN I switched to a mode. First there was a color screen with the specified data to HD2, but then came the white screen that says "loading ..." and nothing happened for an hour. Perhaps this file does not match my HD2, or he do not know.
The second method seemed to me an alternative and downloaded from the official HTC ROM, giving the serial number. Was surprised that it was a ROM for Norway. I do not know well past the phone, so I do not exclude the possibility that the phone is from Norway. I downloaded the ROM, I downloaded the ActiveSync. But I do not know why when you plug the phone activesync can not connect with them. He writes the message "The device was not detected. " I wanted to try and install without ActiveSync, but the installation failed.
I have no strength, like I'm doing everything ok, but I can not fix this for anything WM 7
Sorry for language errors, I used google translate to translate.
Any help thanks in advance.
Click to expand...
Click to collapse
The easiest way to reflash is using SD Card method.
If you dont have HSPL installed, you should only use this SD Card method to flash the Correct Stock ROM.
Download your correct stock ROM (you must be sure about this, in order to avoid failure). Ectract the downloaded correct stock ROM using 7zip or Winrar. Find the file named: RUU_signed.nbh and rename it to : leoimg.nbh. Place/copy that file to the root directory of your micro sd card (using card reader). For better result, before doing that, you may format your sd card to FAT 32, and copy only that file for flashing purposes only.
Now, put your sd card back to the phone. Go into bootloader mode (by pressing volume down and power on buttons at the same time). Follow the onscreen instruction. Dont forget, to charge your batter before flashing.
goodluck
Thank you all for your responses. I still have one request to you. The set did not get the CD with drivers for HD2. Has anyone can link to them? Thank you in advance.
czarinio said:
Thank you all for your responses. I still have one request to you. The set did not get the CD with drivers for HD2. Has anyone can link to them? Thank you in advance.
Click to expand...
Click to collapse
The Windows Mobile Devive Center has the drivers for the HD2 in it. So when you download the program and install it to your computer you have the drivers. Go to microsoft.com/getstarted to get the WMDC program.

Categories

Resources