i need to hard reset for rw6828 after flashing to wm6
try use sr+power button
Thank you. i do it but not hard reset !!!!
try use sofrt reset + power button after screen show call + end call press softkey
g1a5o2 said:
i need to hard reset for rw6828 after flashing to wm6
Click to expand...
Click to collapse
easy!! press Power + dial + hangup and reset!
it show press dial & hangup, Please press _ both replace dial & hangup.
Related
Hi!
Please help, after a bad update my MDAII does not boot!
On the Display after cold boot: NO GSM
D 1.03.00 GER
I read, that it´s posible to boot from SD-CARD.
But where i can get a working image for my SD Card.
How does it works exactly ?
Thanks
Steve
that means that the radio update failed.
if you boot your device into bootloader mode ( press power + action key simultanuously, while resetting )
put it in it's cradle,
your screen should say 'USB' on the top, and '1.06' ( or another version ) on the bottom.
and run the upgrade again.
after about 2-3 minutes the upgrade will start again.
Thans for the fast reply!
I try it but it wont work :-(
Power button + Action Key & Reset
Witch action key you mean? I tryed the button under the Power button.
Steve
steve2000 said:
Thans for the fast reply!
I try it but it wont work :-(
Power button + Action Key & Reset
Witch action key you mean? I tryed the button under the Power button.
Steve
Click to expand...
Click to collapse
Nope, action key is meant to be the four ways key! The key between the red and green button! You have to press that in the middle! That's the action key.
HEHE!
Thanks alot !!!!! -- it works !
Steve
Apparently there is no soft reset button on Niki. Can a soft reset be done by press and hold the camera button and then press power on?
If not, does anyone know a trick to soft reset Niki?
I need to know because the upcoming Sim unlocker, which is based on Kaiser Sim unlocker, requires a soft reset.
jockyw2001 said:
Apparently there is no soft reset button on Niki. Can a soft reset be done by press and hold the camera button and then press power on?
If not, does anyone know a trick to soft reset Niki?
I need to know because the upcoming Sim unlocker, which is based on Kaiser Sim unlocker, requires a soft reset.
Click to expand...
Click to collapse
the soft reset button is located near the mini usb connection you have to access it by taking the back cover off and press with the stylus at an 45 degree angle!
yes ... it works
You can also press and hold the power button, then select Yes when the warning message appears.
hi
my htc s740 is dead...
How to a hard reset with the keyboard?
when I press power button the ppc it blocks at written "windows mobile 6.1", if I attend some minute, it exits to me outside a shielded white screen whit this word: "the device is unable to boot because either you have turned off the device incorrectly or tried to install an application from untrusted source.Press SEND to reset your device or press any other button to cancel. This operation will delete all your personal data and restore the device to its factory default settings.
if I press SEND key it does not succeed nothing
while off, press and hold vol down and center nav key, then power button.
ombre33 said:
while off, press and hold vol down and center nav key, then power button.
Click to expand...
Click to collapse
great!!is ok! thanks.....
ombre33 said:
while off, press and hold vol down and center nav key, then power button.
Click to expand...
Click to collapse
hey m8!
Thanks for the solution. i had hardtime doing it thou!!! if you encounter problems. press and hold vol down and center nav key BUT when it comes to power; just dot it. anyway maybe it's just me who did the stupid thing of holding power (well it works for the diamond so i thought...)
anyway thanks goes to ombre33
HTS Rose
R.0.24.30.24
G.12.23.30.06W
D.1.14.00.00
Peace
V
Does not work for me...
My Rose Keyb is not responding, I changed something in the registry and now I can no longer use both Keyb, I remove the battery, try the hard reset button stuff does not work, any ideas ?
sorry edit
ombre33 said:
while off, press and hold vol down and center nav key, then power button.
Click to expand...
Click to collapse
thnx! it works!
Strange.
Very strange! After doing the procedures, the rose ask to do the reboot and stop in logo of HTC. I had never happened me in any pda.
Now what i do?
You have to wait about 4-5 minutes then Rose will reboot again and will install the additional software.
1. From the Home screen, press the Start button.
2. Press More
3. Select Accessories
4. Select Clear Storage
5. You will be prompted to enter a code, enter 1234
I had the same probleem, my HTC S740 freezes after reboot with the HTC logo screen. I tried the follwoing and it worked:
- press and hold vol down and the navigation key
- pres and release directly the power botton
- a messege will apear, press the navigation key.
- the device will reset to factory settings
- a messege appear asking to press vol up to restart
- device will restart and begin reinstalling the software, reboot after then.
May i ask what are the applications (that came installed with the phone) that are gone with the hard resetting ?
Thanks
HTC s740 backup before reset
hi...i would like to know if there is anything one can do to back the information up before resetting the Phone as i have crucial Data i cant affort to loose. PLS HELP!?
There are few backup softwares which can backup almost everything on your phone, and you can easily recover it after hard reset. I personally use Sprite Backup, which is probably the best one.
I try like this! but I can't...
Acer Liquid E hard reset
Turn off your phone, then press and hold the Power until you feel your smartphone vibrate and/or you see the Acer logo screen. Press and hold the Volume up and Volume down buttons. Use the Volume up button to select Clean boot:YES. Press the camera button to confirm.
Help me please!
Thank you very much!
I test this with a E110 but not working.
When you hold vol up and the left send key together and power up phone and hold volup and send key you see the Android system recovery utility.
Now you can select reboot system,apply sdcard:update.zip and wipe data/factory reset.
Press and hold camera botton and power on your handset
Howto reset acer e110
HOWTO:
1.turn off
2.press left button + volume up (hold down)
3.press power button
.......and wait.......
4.select reset and wipe
5.reboot
Finish.
Please use the Q&A Forum for questions Thanks
Moving to Q&A
any guide to flash this model my phone is stuck in boot mode only ..
i found my solution
gsmgoeroe26 said:
I test this with a E110 but not working.
When you hold vol up and the left send key together and power up phone and hold volup and send key you see the Android system recovery utility.
Now you can select reboot system,apply sdcard:update.zip and wipe data/factory reset.
Click to expand...
Click to collapse
thank u so much i used this and now my acer unlocked yahoo,:good: this is working dear :good:
Use a some codes to Hard reset
1:- *2767*3855#
2:- *#*#7780#*#*
100% done by wipe data
lizz said:
HOWTO:
1.turn off
2.press left button + volume up (hold down)
3.press power button
.......and wait.......
4.select reset and wipe
5.reboot
Finish.
Click to expand...
Click to collapse
thanxxxxxxxxxxxxxxxx bro its 100% working for me...
my set is ok now from stuck on logo problem.
shut down your phone, then hold VOL + & VOL - and press power on button.
you u will see some options on screen with black background.
press vol- to move untill youu see "cold boot?" and (warm) press Vol +.to
change it to (cold) press vol - to the menue end.
phone will reboot and reset your files to factory stand
I used that to improve signal stringht on Nokser primary ROM. It worked but not so good
Damn miro, it's called HARD RESET not soft, soft is just normal reboot
aeroflyluby said:
Damn miro, it's called HARD RESET not soft, soft is just normal reboot
Click to expand...
Click to collapse
ok RESET your phone- the same function as in the settings/about ...