Related
After I upgrades the new WWE ROM , When I finished, I hard reset my device, and my atom exec stuck at O2 screen , I tried to go to bootloader to install again but I could not , it go until preparing to install the new rom, it notice that the connection errors, usb transfer fail, please use DSUU in OS mode and sync with PC first.
I thought maybe I still kept the mini SD card in the side when I hard reset so it caused this error.
Can anyone help me fix this ?!
Thnks & Brgds
An Huynh
an-huynh said:
After I upgrades the new WWE ROM , When I finished, I hard reset my device, and my atom exec stuck at O2 screen , I tried to go to bootloader to install again but I could not , it go until preparing to install the new rom, it notice that the connection errors, usb transfer fail, please use DSUU in OS mode and sync with PC first.
I thought maybe I still kept the mini SD card in the side when I hard reset so it caused this error.
Can anyone help me fix this ?!
Thnks & Brgds
An Huynh
Click to expand...
Click to collapse
I think I met someting wrong in bootloader file, Could anyone help me and send me the origin Atom exec ROM file (not the latest file). I think I should get these files to up load bootloader again.
Rgds
An-huynh
hi, i have something similar to above problem,,
my O2 Xda Exec, showing white screen after O2 screen.
this problm started,when i tried arabizer (arabizer13bn257)
pl, help
rgds
Your atom exec lost its extROM.
http://forum.xda-developers.com/showthread.php?t=292115
This problem is also present in the Atom - and if you're getting that message, it means your bootloader has been updated to NOT allow flashing directly from it (thanks, Quanta).
I can't help you with reflashing the BL (you may want to do a search on these boards tho), but try this: turn the device on and leave it for awhile (say 10+ mins), and see if you can get into the Today Screen at least. If you can, simply sync as guest on your PC, then run the DSUU updater. I saved my hacked Atom (using the Exec rom) this way.
If you can't - then I think it's time to call in a warranty.
Ultimate Chicken said:
Your atom exec lost its extROM.
http://forum.xda-developers.com/showthread.php?t=292115
This problem is also present in the Atom - and if you're getting that message, it means your bootloader has been updated to NOT allow flashing directly from it (thanks, Quanta).
I can't help you with reflashing the BL (you may want to do a search on these boards tho), but try this: turn the device on and leave it for awhile (say 10+ mins), and see if you can get into the Today Screen at least. If you can, simply sync as guest on your PC, then run the DSUU updater. I saved my hacked Atom (using the Exec rom) this way.
If you can't - then I think it's time to call in a warranty.
Click to expand...
Click to collapse
I left it for more than 15 minute but nothing happens.
I think the same to you. but i see it can read & execute from mini SD card.
Does anyone can help me ? Which file of bootload that I can execute directly from mini SD card ?
Rgds
An Huynh
Anyone can help me ?! Please !!!
Rgds
An Huynh
Have you tried taking out the battery? This happen to me once a month, and when I took the battery off and then turn it on again it oasses the O2 Screen and continues with the Windows Screen.
ozamalloa said:
Have you tried taking out the battery? This happen to me once a month, and when I took the battery off and then turn it on again it oasses the O2 Screen and continues with the Windows Screen.
Click to expand...
Click to collapse
I tried all things like this ! Still cannot ! Anyones can help me how to install it from the mini SD Card ?! I think we can recover from mini SD card but don't know what kind software to but in this mini SD to do this !
Rgds
An Huynh
an-huynh said:
I tried all things like this ! Still cannot ! Anyones can help me how to install it from the mini SD Card ?! I think we can recover from mini SD card but don't know what kind software to but in this mini SD to do this !
Rgds
An Huynh
Click to expand...
Click to collapse
Can anyone help me ????
Rgds
An Huynh
I have the same problem now
I've got the same problem with my ATOM.
Anyone help us plz??
i have same problem too, whenever i start my atom exec it directly goes to MN2 bootloader, i tried rom update but it asks me to run it in OS mode which i can't do as my device never goes past the bootloader. i have read of a miniSD card method to try upgrade but this bricked the atom in all cases i read.
Please we need a solution for this, my atom's warranty is over
@all
anyone have a solution on how to downgrade rom..
i have a ATOM and upgraded to ATOM EXEC rom..
theres some guide in here but its inside of other thread and its not working..
please help us..i know im not the only one have a problem like this..
thanks in advance..
-=[serialzs]=-
If you have Atom Exec ROM, then the bootloader keys are Camera+Reset. If you can enter bootloader, you can now upgrade to the usual XDA Atom ROM.
Cheers,
Jiggs
jiggs said:
If you have Atom Exec ROM, then the bootloader keys are Camera+Reset. If you can enter bootloader, you can now upgrade to the usual XDA Atom ROM.
Cheers,
Jiggs
Click to expand...
Click to collapse
where i can put the bootloader? can you help me? please..
-=[serialzs]=-
serialzs said:
where i can put the bootloader? can you help me? please..
-=[serialzs]=-
Click to expand...
Click to collapse
press camera+reset button. you should see bootloader screen. From here, upgrade using the procedure I discussed in the aku3.3 thread.
cheers,
Jiggs
thanks for the help but i figure it out on my own now..i done it with something i dont think earlier because im too excited..hehe..
now i have a atom rom back again..
i will guide people have same problem..hope i can help..
-=[serialzs]=-
o2 atom upgrade problem
hi
i need ur help
i have o2 atom i upgrade to exec now i can not go back
it give me error in connection
please help
all_brother2002 said:
hi
i need ur help
i have o2 atom i upgrade to exec now i can not go back
it give me error in connection
please help
Click to expand...
Click to collapse
what version of atom exec you use?
-=[serialzs]=-
Well, I managed to downgrade my ROM back to the original Atom (my sig isn't updated - had problems with the extROM wiping itself) - but I was kinda lucky.
Y'see, the AE hack rom I use has an updated bootloader that won't let you do a USB firmware update unless you're activesync'd.
The only way to solve an ExtROM wipe was to reflash the device, so I did. Using the hack ROM DSUU - at this point, the original ROM won't recognize the device - I found that it usually takes a few tries for the extROM update to go through (extROM format fail) - when it fails, your phone will be stuck in bootloader (Connect a USB cable). Repeated attempts to flash the phone solves the problem.
So when my extROM inevitably disappeared again, and I hit the extROM format fail again, I decided I had enough and tried using the original Atom0426-0822 ROM.
It went through this time.
Seems that the only way to bypass the bootloader lock is to semi-brick your device. >_>
Just a question to all of you who are more experienced than me
I want to change my atom exec wwe to cht, can anyone tell me how to bypass the device country id error. do i use an spl? and are these spl programs device specific? or do i use the bootloader mode? Can someone explain that to me?
Thanks all in advance.
Bootloader mode works as long as you aren't using the Atom Exec hacked ROM (bootloader will tell you to use Async if you try). To upgrade, go into the bootloader, connect via USB, and run the DSUU from the computer.
You know you did it correctly when your unit's current firmware information is read as "0" by the DSUU/
Ultimate Chicken said:
Bootloader mode works as long as you aren't using the Atom Exec hacked ROM (bootloader will tell you to use Async if you try). To upgrade, go into the bootloader, connect via USB, and run the DSUU from the computer.
You know you did it correctly when your unit's current firmware information is read as "0" by the DSUU/
Click to expand...
Click to collapse
Strange, i already did that, and got the "0" from DSUU, but when i start upgrading, the bootloader spits out a message saying that i should connect with OS mode.
Anyway, I've edited the diskimage_Ver.nb0 file to do it.
Hi,
I have the same problem :
- bootloader : ok
- firmware 0 : ok
but connection error !
Do you have an idea ?
Thanks a lot.
bedav said:
Hi,
I have the same problem :
- bootloader : ok
- firmware 0 : ok
but connection error !
Do you have an idea ?
Thanks a lot.
Click to expand...
Click to collapse
Hi guy the main key on the file call EBOOT everytime when you want dowgrade your OS to normal ATOM just put this file to you SD card then use the bootloader mode you can see "imge downloading" just wait for a second it will reboot again . then you can use the DSU mode to flash your device
thats work !
Thank you very much !
HELP on my atom exec
w/o reading, i downgraded my atom exec to atom...
hw can i bring back my atom exec default WM5 ROM?...
am planning to upgrde to WM6 aftr...
hi
i updated my atom rom version to 3.3.3 three days ago.It installed completed i used this rom 3-4 hours then i was freeze and i try to reset it. it didnt respond so i decided to hard reset to my atom.I tried to hard reset now it says "device clean boot....." it stuck this screen then i try to reset the device then it stuck o2 screen it didnt pass to align screen. i cant use my atom for three days
Please help me......
remove the battery for a while.. then try hard reset / reflash
i try this method but it is same it doesnt work
did u try the instructions posted in aku 3.3.3.??..
"
For those of you who have downloaded and flashed using SD Card method who ended up in a brick! ITEX recovers his Atom by following procedure:
1. remove SD Card
2. remove battery
3. hold camera button and reset (stylus) button
4. replace battery while still holding the buttons
This will bring you back to bootloader mode. Just flash the above DSUU.
"
Does it have a chance to use wm6?
joolawan said:
Does it have a chance to use wm6?
Click to expand...
Click to collapse
it can barely use WM5 and anyway these chinese splash their advertising for WM6 all over the place in hope ppl will buy their rom, until I see it running in my device or get confirmation from someone reliable (such as Jiggs) I dont believe a word of it and besides the 3.3.3 rom is very fast and ten times better than any actual official release
yes i tried to that method too. it is same it still stuck on o2 screen. it doesnt pass to align screen..please help me
my problem didnt solve pls help me i cant use my atom..........
plsssssssss help meeee...........
plsssssssss help meeee...........
R U able to go to bootloader mode ?...
ironeagle said:
R U able to go to bootloader mode ?...
Click to expand...
Click to collapse
try to be on the bootloader and reflashed the ROM. try to search same cases in the forum. I think they solved the problem alike.
yes same to problem. i dont re enter bootloader again :S
did DSUU Recognize your ATOM ?..
Connect your ATOM to PC (using USB)
Run DSUU
Try to flash it..
i can enter bootloader mode and i can update rom but after this proccess it says "device clean boot......" and it freeze . it doesnt pass to align screen
plssss help meeeeeeee.
Which ROM you flashed?..
i flashed orginal atom rom i downloaded from seeo2.com
pls helpppp meeeee my atom is dead
are u using o2 atom exec or just atom?
cuyz i've got o2 atom exec..maybe i could flash it with o2 atom (yeah i cant flash anything with dsuu)
mine is o2 atom
did u amend any thing from the original ROM from seeo2? I mean you flash your atom with the original ROM...0426? without replacing the extended ROM...etc?
Help!!!
My Atom Life goes Brick.
Yesterday I am planning to upgrade my atom life from wm5 CHT to wm6 ENG.
Unfortunately, I wrongly downloaded the Atom Exec rom in the forum and put into my atom life. Of course, flashing not successful, however the atom life stuck in the "device booting..." screen.
I can enter the bootloader and I try to reflash the correct rom. But either CHT or WWE rom also not successful with the same reason: "Customer or Model ID Error"
I already try to edit the pass.32 file and nothing changes and give the same result!
Anybody can tell me how can I refalsh my device?
Or I can use SD to reflash my machine?
henryto said:
Help!!!
My Atom Life goes Brick.
Yesterday I am planning to upgrade my atom life from wm5 CHT to wm6 ENG.
Unfortunately, I wrongly downloaded the Atom Exec rom in the forum and put into my atom life. Of course, flashing not successful, however the atom life stuck in the "device booting..." screen.
I can enter the bootloader and I try to reflash the correct rom. But either CHT or WWE rom also not successful with the same reason: "Customer or Model ID Error"
I already try to edit the pass.32 file and nothing changes and give the same result!
Anybody can tell me how can I refalsh my device?
Or I can use SD to reflash my machine?
Click to expand...
Click to collapse
You can try the procedure in the WIKI under upgrading problems. Since your bootloader has been changed. BUT instead of using the ATOM eboot.nb0, use the Atom Life eboot.nb0 as replacement.
Good Luck!
jiggs said:
You can try the procedure in the WIKI under upgrading problems. Since your bootloader has been changed. BUT instead of using the ATOM eboot.nb0, use the Atom Life eboot.nb0 as replacement.
Good Luck!
Click to expand...
Click to collapse
Jiggs,
Thanks for your suggestion!
I have try but not useful!
Henry
same too me
same to me got other solution ??
Please check it out for the latest news at here.
http://forum.xda-developers.com/showthread.php?t=362338
I make the upgrade from WM5 to WM6 by the following post.
ATOM EXEC WM6 AKU0.7a.0 WWE 20071117A1WWE with STK
ATOM EXEC WM6 0.7b.0 WWE 20071216A3WWE
But I reaily can not accept the Bluetooth headset can not use for phone.
I want to downgrade to my default OS, WM5.
I had downloaded the Offical WM5 roms in my computer.
But I tried to downgrade by DSUU directly after the Atom Exec sync with PC.
The error message prompted with "Error Country ID or Device id Error"
I also tried in other mode, (Camara + Reset)
It can detect the CE IMAGE ROM, but unable to detect the Device Rom version.
So the DSUU will show the error "Error: Connection Error."
How can I downgrade the device the Atom Exec to WM5 ?
have you tried MN1 EBOOT?
http://forum.xda-developers.com/showthread.php?p=1684559&highlight=EBOOT.NB0#post1684559
My friend admin88hk be very careful while playing with the bootloader using sdcard or u will have a bricked device like mine . Read the complete forums on upgrade of atom exec then proceed with caution and cross ur fingers during the procedure.
hmmm.... try this first before you flash with SD Card
http://forum.xda-developers.com/showthread.php?t=335271
cheers,
TJ
Is it follow by this step, the device can be fully backwaard to WM5, if all of the step are success.
After that, the O2 connect and O2 Software can be used or not ?
I am looking for a success case.
Is there anyone has been done the steps which are posted about MN1 EBOOT??
Can reply me or give me confidence?? Thanks.
am looking for a success case.
Is there anyone has been done the steps which are posted about MN1 EBOOT??
Click to expand...
Click to collapse
Well it certainly has'nt been thought up on a whim, if thats what you're thinking.
Search and find your confidence mate, heck the link has been given to you!
This topic has been discussed in detail in all main Atom threads, try the link given by tjlabias(<-- btw hope you're well mate! ) after if no success then EBOOT method
I have follow the instructurtion for go back to WM5.
But I get a problem in the step 3.
I have download the EBOOT.nb0 and copy to MiniSD card.
After I insert into Atom EXEC, Press camera+reset.
The Screen will post the transfer in completed after 3 - 5 seconds the screen was load.
But the Atom EXEC was not action come out after the following 3 minutes.
So I press camera+reset again.
The screen still at MN2......
How can I change the bootloader to MN1........
any other solution to do it ?
I am reaily can not stand for the phone can not use the Bluetooth headset.
I also has found a some threads also related, but all of them is not work.
http://forum.xda-developers.com/showthread.php?t=331818
This case was very seems with me.
* I am uploading the image to webhost, I will update the post ASAP.
edit: I searched further and found that it could be done. Sorry for the unnecessary post!
-----
on a side note, is it possible to use the ROMs shown here for WM6 on my o2 which currently has WM5? Or do I first have to get an official upgrade to WM6 and then install the new ROMs here?