hey there!
First of all, a big congrats for b4. It's made my Qtek S200 one of the most complete phones I've ever handled. Using for a while now, I've decided to ask you guys about two problems I've had. First, my phone has stopped vibrating. I know it's not a physical problem since I downgraded to my original rom and the vibration started working again. But once I upgraded to fantastic b4, no vibration.
2nd problem is I'm having trouble activating both bluetooth and wifi. For bluetooth, the only way I can get it to activate is by clicking the bluetooth at the bottom right of the today screen, and that just after I've done a soft reset. There's no way I can get it to activate using the Comm Manager screen. Now for wifi, I've the same problem. I can't get it to activate even after doing a soft reset.
Anybody has any ideas for my problems? Thanks for letting me know.
p.s. I've installed the PCMKeyboard which is an emulation of the iphone keyboard and now my ppc is uniquely thumb dependant!
I installed gulum's Touch v6 and now both the bluetooth and wifi are working correctly. However still nothing for the vibration...
Hi gurus!
I wish to know if there is a reg edit to change something to turn on automatly on incoming call.
I know some soft to do this but don't owrk well with WM5 & WM6.
some of theme BTTools, phoneAlarm-v1.6...
So if there some soft that work ok....
Thanks!!!
PD: Sorry for my english
Hi there,
I had the same problem, at the moment I use CommMgrPro on WM6, but this software is able to do a lot more than just to switch on Bluetooth. The problem so far is when the phone is ringing, it takes a while (2 rings) Bluetooth is switched on, another two rings the headset is connected to take over the call. So I'm not totally satisfied with the solution.
Here you can find the tool:
http://www.commmgrpro.com/
Greetings
Naylos
I'll test
Thanks dude!!!!
davicito13 said:
I'll test
Thanks dude!!!!
Click to expand...
Click to collapse
I do not get your problem. I use Jabra BL headset (two different models) and do not need any additional software to be able to answer the call with BL headset. I can hear beep in my Jabra and can push the button to receive a call. Just simply have paired my Jabra with my X7500.
Hi all, Im noobz
probably what davicito13 ask was how to make the BT automatically switched on ONLY when theres an incoming call and automatically switched off when finshed.
(triying 2save batery i guess)
CSDEVCTRL
CSDEVCTRL has this option. Works perfectly on HTC Touch.
http://forum.xda-developers.com/showthread.php?t=386451
Hi,
I did Mortscript code this "BT on with call" functionality for use with PocketMax.net PhoneAlarm. Penguin has reported that the next version already has that functionality when he releases it.
The script can easily operate independently from PhoneAlarm.
I did post the script over at PocketMax forums, and if anybody ever wants that app, let me know and I will repost it here as well.
If I leave my BT on, even with a extended battery, my phone dies twice as fast.
With PhoneAlarm I could have it turn the BT on or off with power. The real issue for my phone is that PhoneAlarm is the only BT toggler that works.
Anyhow, if you want it let me know.
thanks, Keith
MortScript
Hey Keith,
please post this MortScript-code.
Thanx Ralph
Re: Bluetooth on/off w/power
« Reply #13 on: October 05, 2009, 02:19:26 pm »
--------------------------------------------------------------------------------
Hi,
Here is a script i wrote for PA that automatically turns on the bluetooth on an incoming call.
This can be added to a PA profiles' run application option.
Of course my phone has a window that says "Phone - Incoming...", other phones may have a different window title. If you ignore the phone call that window hides in the background so shutting the bluetooth off automatically is tricky. I did set the script so it turns off bluetooth if you look at "Call History". There may be a better way to know the call has ended. I am not sure the "Phone - Incoming" window closes after you exit the call.
To kill the script, you can also witch to a different profile than "Car=On" or the profile that was active when you ran the script.
From here that leaves the door open to an auto-answer with speakerphone option. Very easy.
If you do add the command line option for BT toggle, I can just turn bt on without switching profiles to Car.
I also updated the Status script to add the BT on Call message.
--------------------------------------------------------------------------------
PaBTonCall.zip (2.73 KB - downloaded 27 times.)
Keep in mind this is an antique. Probly like 8 months old. Ok maybe like 4 months old. seems like a long time in mortscript years.
Hi Guys,
I'm also a proud owner of the HTC HD2, but I've got 2 problems with it.
The first:
I use the BlueTooth connectivity to connect to my hands-free set (In car hands free set on the Alfa MiTo which is also Windows Mobile powered). Now here's the problem. Situation:
I go to work, turn on my BlueTooth, get in the car and it connects fine. When I'm at work I turn BlueTooth off (to save battery power). At the end of the day, when I'm going back home, I perform the exact same routine, but this time when I'm trying to enable BlueTooth the HD2 crashes. It freezes all together. Only the hardware buttons continue to work, except, the long-hold on the ON/OFF-button to turn off the device doesn't work. Now I think you all agree that this is pretty anoying, cause I have to remove the battery to reset the HD2.
Second:
I use my HD2 as my wakeup alarm in the morning. Because I'm a deep sleeper I set 2 alarms on the device, just to make sure ;-) Often I'm awake on the first alarm and I switch the second one Off using the sense interface and pressing the 'On - Off' slider in the Alarms menu. Guess what? The second alarm still rings at the time it was orginally set!
Does anyone recognise these problems and/or do you have any advise on how to solve these problems?
[Device specs]
Radio Rom: 2.04.50.22_2
ROM: 1.43.404.1 (70124) NLD (26 october 2009)
Manila: 2.5.19202525.0
I'm having the same problem with the alarm, don't know a solution but im looking for a free alternative app.
I am having a problem with the alarm as well. Also my alarm is now gives the alarm of an calender appointment. I tried changing the sound in both the HTC sense and windows mobile configuration screen. The configuration goes well but when testing, it still only gives the appoinment sound (2 pings). Has anyone encountered this mismatch issue and know how solve it?
I have the problem to turn on the bluetooth also. After I click the button to on the bluetooth, the bluetooth bar dimmed and hang up the hold Comm Manager. A few minutes later, it said "can't turn on bluetooth". It doesn't happen when I turn on the bluetooth right after I switch on my HD2.
hkwylai said:
I have the problem to turn on the bluetooth also. After I click the button to on the bluetooth, the bluetooth bar dimmed and hang up the hold Comm Manager. A few minutes later, it said "can't turn on bluetooth". It doesn't happen when I turn on the bluetooth right after I switch on my HD2.
Click to expand...
Click to collapse
I have the exact same problem.
other problems with bluetooth
My Elf, Hermes all work fine with my Cars built in hands free (BMW6 Series) however the new HD2 connects fine...but the audio quality is crap to the point of having to use the headset shipped with the device.
Other problems....VOLUME CONTROL...or the lack of it. HAd to reset my phone just to be able to use the side switch within HTC music player and on speaker phone...can't turn the volume down.
same for me
having the same bluetooth problems, comm manager hangs when trying to re-enable bt. find the alarm pretty naff. need to get a proper alarm program, any suggestions?
Same BT issues here, plus phone drops calls when connected to car's built-in BT. Also unable to use phone as a modem using BT connection to my laptop - but works fine when connected via usb cable.
Alarm selected sound also not playing, but getting just the 2 pings no matter what sound I choose. Hope HTC is aware of these problems and addressing them with Rom update soon.
[having the same bluetooth problems, comm manager hangs when trying to re-enable bt. find the alarm pretty naff. need to get a proper alarm program, any suggestions?]
G-Alarm is a very nice program. Only downside is, you must buy it.
I mailed HTC, but those ******* at HTC support center just give you a basic nonsence answer. The BT issue is a problem of my car and not the phone (according to them). The alarm-issue they don't reply on.
However I did found a workaround for the BT-re-enable issue. Turn of the BT, then wait for about 5 seconds before you re-enable the BT. This should work. I think the problem is, that the slider is already at the "off" point, but in fact the the connections with BT are still being terminated.
The rest of the issue with BT I gave up. I reported a complaint to HTC, but not much change I ever here anything of that. Just wait until they finally bring out that 1.61 rom en hope they fixed the BT-problems in that radio rom.
Hope this can help. I got my BT working again
If you have installed TOMTOM it can be the problem. Found this in another forum:
TOMTOM places a new BT dlls under the windows folder that I had to remove:
\Windows\BtSdkCE30.dll
\Windows\BtCoreIf.dll
You can either ename them or remove them and then soft restart your Touch Pro 2/HD2 and everything will go back to normal.
MrWortel said:
G-Alarm is a very nice program. Only downside is, you must buy it.
Click to expand...
Click to collapse
There's an old version of G-Alarm that is free. The last free version is 1.5.1 and I got mine in one of these PPC freewares sites. Anyway, I use this application so much that I think I'll buy it.
bluetooth
hkwylai said:
I have the problem to turn on the bluetooth also. After I click the button to on the bluetooth, the bluetooth bar dimmed and hang up the hold Comm Manager. A few minutes later, it said "can't turn on bluetooth". It doesn't happen when I turn on the bluetooth right after I switch on my HD2.
Click to expand...
Click to collapse
me to (((
please help
Same BT problem here, the two TomTom files rename done.
Bluetooth hang
MrWortel said:
....
I go to work, turn on my BlueTooth, get in the car and it connects fine. When I'm at work I turn BlueTooth off (to save battery power). At the end of the day, when I'm going back home, I perform the exact same routine, but this time when I'm trying to enable BlueTooth the HD2 crashes. It freezes all together. Only the hardware buttons continue to work, except, the long-hold on the ON/OFF-button to turn off the device doesn't work. Now I think you all agree that this is pretty anoying, cause I have to remove the battery to reset the HD2.
Click to expand...
Click to collapse
Same problem 4 me...very anoying......and no TOMTOM installed!!!!!
ROM 1.48.408.1 (ITA) 71294
RADIO VERS 2.05.51.05_2
MANILA 2.5.19211619.0
SAman1 said:
Same BT issues here, plus phone drops calls when connected to car's built-in BT. Also unable to use phone as a modem using BT connection to my laptop - but works fine when connected via usb cable.
Alarm selected sound also not playing, but getting just the 2 pings no matter what sound I choose. Hope HTC is aware of these problems and addressing them with Rom update soon.
Click to expand...
Click to collapse
Idd I have the same problems, well that bluetooth 'crashes' and after a few min I get the message can't turn on bluetooth. I will report this to HTC (website), plz all of you, do the same, hopefully then can write an update for this!
MrWortel said:
[having the same bluetooth problems, comm manager hangs when trying to re-enable bt. find the alarm pretty naff. need to get a proper alarm program, any suggestions?]
G-Alarm is a very nice program. Only downside is, you must buy it.
Click to expand...
Click to collapse
It's very nice and worth to buy it imo, it works for me. You can try it out for free and then purchase it if you like it. It's 5 Euro, so it aint that expensive!
steve87 said:
Hope this can help. I got my BT working again
If you have installed TOMTOM it can be the problem. Found this in another forum:
TOMTOM places a new BT dlls under the windows folder that I had to remove:
\Windows\BtSdkCE30.dll
\Windows\BtCoreIf.dll
You can either ename them or remove them and then soft restart your Touch Pro 2/HD2 and everything will go back to normal.
Click to expand...
Click to collapse
Those are protected files, how can I delete those!?
XTREEM|RAGE said:
Idd I have the same problems, well that bluetooth 'crashes' and after a few min I get the message can't turn on bluetooth. I will report this to HTC (website), plz all of you, do the same, hopefully then can write an update for this!
Click to expand...
Click to collapse
Please could you send me the link to HTC so i can contribute to place the report.
Papagno said:
Please could you send me the link to HTC so i can contribute to place the report.
Click to expand...
Click to collapse
http://www.htc.com/uk/CS_Mail.aspx
or
http://www.htc.com/uk/about_htc_bymail.aspx
Hi,
Just received a TG01 as insurance replacement for HTC Touch HD (none in stock) on Orange and getting used to it, for better and worse...!
One vital thing I keep finding is the connection sometimes switches to using 3G when I am connected to wifi. On the HTC, it was a simple case of using Comm Manager and turning off the Data Connection. On this phone, the connection manager just has 'Phone', 'Bluetooth' and 'Wifi' - and they're either on or off. The 'Phone' option turns all the functions of the phone off, including the data connection, but it's not exactly ideal.
The phone is running WM6.5 - the comm manager doesn't look very Microsofty so I'm guessing it's a bad Toshiba add in.
Any help getting something decent and easy working would be appreciated!
Pat
patc said:
Hi,
Just received a TG01 as insurance replacement for HTC Touch HD (none in stock) on Orange and getting used to it, for better and worse...!
One vital thing I keep finding is the connection sometimes switches to using 3G when I am connected to wifi. On the HTC, it was a simple case of using Comm Manager and turning off the Data Connection. On this phone, the connection manager just has 'Phone', 'Bluetooth' and 'Wifi' - and they're either on or off. The 'Phone' option turns all the functions of the phone off, including the data connection, but it's not exactly ideal.
The phone is running WM6.5 - the comm manager doesn't look very Microsofty so I'm guessing it's a bad Toshiba add in.
Any help getting something decent and easy working would be appreciated!
Pat
Click to expand...
Click to collapse
Hi Pat: Wellcome to this TG01 Thread (even for few days I assume )
Anyway, I use the famous app Modaco's NODATA
http://www.modaco.com/content/pocket-pc-software/246171/new-free-utility-nodata/
There is another app doing the same and more finger friendly here (but never tested):
http://www.modaco.com/index.php?s=&showtopic=246171&view=findpost&p=1265802
You can try both and review here , if you agree
By the way, as a accidental TG01 user, could you please compare features with your HTC Touch HD? Thank you in advance!
Thank you for the helpful response and welcome
I've tried both apps - the first one only disables connections in a sort of semi permanent way and says you have to manually stop any existing connections when you turn them off - the point is, I can't manually stop the existing connections, that's what I want an app to do, and what Comm Manager used to do!
The second one complains about the .net framework and refuses to run, even though I have the latest redistributable on there, having windows mobile 6.5...
So I'm still a bit stuck.
I will post a comparison when I get the chance
You are welcome! That's a bit odd. I've been using NODATA for ages, on mi former device and now on TG01 under WM6.1 and WM6.5.
You have to be off data (not connected or only wifi connected). Then you ENABLE of DISABLE each mobile connection with the soft key "Toggle" and that's all. Which ROM do you have? Does somebody else have problems with NODATA?
Hi everybody,
I'm having problems with nodata on myTG01 (Evealex V5 ROM).
As soon as I launch it, it gives me an error message.
It used to work great with the second original toshiba ROM.
Please, help me !
Install attached HTC comm manager.
and do the following for Wlan:
Go to key in registy "HKLM\Software\Drivers\WLAN" and copy the value from 'AdapterName" string. Now go to key in registry "HKLM\Software\HTC\CommManager\WLAN" and edit "DeviceName" string. You see there value like this: "{98C5250D-C29A-4985-AE5F-AFE5367E5006}\TNETW12511". Delete the last part of this value ("TNETW12511") and past the value "AdapterName" which you copy at end. Make soft reset and that is all. Now Wifi button on your device should work properly