Related
Hey Everyone am Sorry For Posting a New Thread But I Really Need Some Help & THX......here is my problem (That i think is serious) My Bluetooth in my hermes Dosent Turn On !!! & I Dont Know Why ?? I Installed (UPGRADED) 3 ROMS Till Now (Pro Black 3.5)(Official HTC ROM)(Schaps ROM) (Sleuth's Developer Variant But It Bricked While Upgrading) & In The 3 Cases My Bluetooth Dosent Turn On (When I Turn It ON From The Comm Manager It Blinks Blue Sometimes But It Dosent Turn ON & When I Turn It ON From The Bluetooth Settings And Make It Visible (TICKED The Both) Then I Close The Settings Then I Open Again I Find Them NOT Ticked !!! Why ?? I Cant Send Anything Via Bluetooth And Am NOT Visible To Anyone..I Hope This Info Will Be Helpful....Any Help Will Be Appreciated....& THX
EDIT : I UPGRADED TO Schap's ROM 4.22 BUT Still My BT Problem
(WHEN I Go to Settings>Connections>Bluetooth>Mode & Then I Turn It ON And Make It Visible And Press OK NOTHING HAPPENS AS IF I DIDNT TURN IT ON AND MAKE IT VISIBLE & In The Comm Manager I TURN IT ON BUT STILL Its OFF)
Had the same problem. Returned the phone to ATT for a replacement. I dont know if yours is a 8525, or if you bought it within the last year. but if you have, give ATT a call.
I have this same problem.
I had my BT working fine - connected to my PC for AS, and to my BT GPS. But, now it won't start up.
Using Comm Mgr, or connex-BT doesn't work.
Any ideas?
-bZj
Hi Guys,
I'm also a proud owner of the HTC HD2, but I've got 2 problems with it.
The first:
I use the BlueTooth connectivity to connect to my hands-free set (In car hands free set on the Alfa MiTo which is also Windows Mobile powered). Now here's the problem. Situation:
I go to work, turn on my BlueTooth, get in the car and it connects fine. When I'm at work I turn BlueTooth off (to save battery power). At the end of the day, when I'm going back home, I perform the exact same routine, but this time when I'm trying to enable BlueTooth the HD2 crashes. It freezes all together. Only the hardware buttons continue to work, except, the long-hold on the ON/OFF-button to turn off the device doesn't work. Now I think you all agree that this is pretty anoying, cause I have to remove the battery to reset the HD2.
Second:
I use my HD2 as my wakeup alarm in the morning. Because I'm a deep sleeper I set 2 alarms on the device, just to make sure ;-) Often I'm awake on the first alarm and I switch the second one Off using the sense interface and pressing the 'On - Off' slider in the Alarms menu. Guess what? The second alarm still rings at the time it was orginally set!
Does anyone recognise these problems and/or do you have any advise on how to solve these problems?
[Device specs]
Radio Rom: 2.04.50.22_2
ROM: 1.43.404.1 (70124) NLD (26 october 2009)
Manila: 2.5.19202525.0
I'm having the same problem with the alarm, don't know a solution but im looking for a free alternative app.
I am having a problem with the alarm as well. Also my alarm is now gives the alarm of an calender appointment. I tried changing the sound in both the HTC sense and windows mobile configuration screen. The configuration goes well but when testing, it still only gives the appoinment sound (2 pings). Has anyone encountered this mismatch issue and know how solve it?
I have the problem to turn on the bluetooth also. After I click the button to on the bluetooth, the bluetooth bar dimmed and hang up the hold Comm Manager. A few minutes later, it said "can't turn on bluetooth". It doesn't happen when I turn on the bluetooth right after I switch on my HD2.
hkwylai said:
I have the problem to turn on the bluetooth also. After I click the button to on the bluetooth, the bluetooth bar dimmed and hang up the hold Comm Manager. A few minutes later, it said "can't turn on bluetooth". It doesn't happen when I turn on the bluetooth right after I switch on my HD2.
Click to expand...
Click to collapse
I have the exact same problem.
other problems with bluetooth
My Elf, Hermes all work fine with my Cars built in hands free (BMW6 Series) however the new HD2 connects fine...but the audio quality is crap to the point of having to use the headset shipped with the device.
Other problems....VOLUME CONTROL...or the lack of it. HAd to reset my phone just to be able to use the side switch within HTC music player and on speaker phone...can't turn the volume down.
same for me
having the same bluetooth problems, comm manager hangs when trying to re-enable bt. find the alarm pretty naff. need to get a proper alarm program, any suggestions?
Same BT issues here, plus phone drops calls when connected to car's built-in BT. Also unable to use phone as a modem using BT connection to my laptop - but works fine when connected via usb cable.
Alarm selected sound also not playing, but getting just the 2 pings no matter what sound I choose. Hope HTC is aware of these problems and addressing them with Rom update soon.
[having the same bluetooth problems, comm manager hangs when trying to re-enable bt. find the alarm pretty naff. need to get a proper alarm program, any suggestions?]
G-Alarm is a very nice program. Only downside is, you must buy it.
I mailed HTC, but those ******* at HTC support center just give you a basic nonsence answer. The BT issue is a problem of my car and not the phone (according to them). The alarm-issue they don't reply on.
However I did found a workaround for the BT-re-enable issue. Turn of the BT, then wait for about 5 seconds before you re-enable the BT. This should work. I think the problem is, that the slider is already at the "off" point, but in fact the the connections with BT are still being terminated.
The rest of the issue with BT I gave up. I reported a complaint to HTC, but not much change I ever here anything of that. Just wait until they finally bring out that 1.61 rom en hope they fixed the BT-problems in that radio rom.
Hope this can help. I got my BT working again
If you have installed TOMTOM it can be the problem. Found this in another forum:
TOMTOM places a new BT dlls under the windows folder that I had to remove:
\Windows\BtSdkCE30.dll
\Windows\BtCoreIf.dll
You can either ename them or remove them and then soft restart your Touch Pro 2/HD2 and everything will go back to normal.
MrWortel said:
G-Alarm is a very nice program. Only downside is, you must buy it.
Click to expand...
Click to collapse
There's an old version of G-Alarm that is free. The last free version is 1.5.1 and I got mine in one of these PPC freewares sites. Anyway, I use this application so much that I think I'll buy it.
bluetooth
hkwylai said:
I have the problem to turn on the bluetooth also. After I click the button to on the bluetooth, the bluetooth bar dimmed and hang up the hold Comm Manager. A few minutes later, it said "can't turn on bluetooth". It doesn't happen when I turn on the bluetooth right after I switch on my HD2.
Click to expand...
Click to collapse
me to (((
please help
Same BT problem here, the two TomTom files rename done.
Bluetooth hang
MrWortel said:
....
I go to work, turn on my BlueTooth, get in the car and it connects fine. When I'm at work I turn BlueTooth off (to save battery power). At the end of the day, when I'm going back home, I perform the exact same routine, but this time when I'm trying to enable BlueTooth the HD2 crashes. It freezes all together. Only the hardware buttons continue to work, except, the long-hold on the ON/OFF-button to turn off the device doesn't work. Now I think you all agree that this is pretty anoying, cause I have to remove the battery to reset the HD2.
Click to expand...
Click to collapse
Same problem 4 me...very anoying......and no TOMTOM installed!!!!!
ROM 1.48.408.1 (ITA) 71294
RADIO VERS 2.05.51.05_2
MANILA 2.5.19211619.0
SAman1 said:
Same BT issues here, plus phone drops calls when connected to car's built-in BT. Also unable to use phone as a modem using BT connection to my laptop - but works fine when connected via usb cable.
Alarm selected sound also not playing, but getting just the 2 pings no matter what sound I choose. Hope HTC is aware of these problems and addressing them with Rom update soon.
Click to expand...
Click to collapse
Idd I have the same problems, well that bluetooth 'crashes' and after a few min I get the message can't turn on bluetooth. I will report this to HTC (website), plz all of you, do the same, hopefully then can write an update for this!
MrWortel said:
[having the same bluetooth problems, comm manager hangs when trying to re-enable bt. find the alarm pretty naff. need to get a proper alarm program, any suggestions?]
G-Alarm is a very nice program. Only downside is, you must buy it.
Click to expand...
Click to collapse
It's very nice and worth to buy it imo, it works for me. You can try it out for free and then purchase it if you like it. It's 5 Euro, so it aint that expensive!
steve87 said:
Hope this can help. I got my BT working again
If you have installed TOMTOM it can be the problem. Found this in another forum:
TOMTOM places a new BT dlls under the windows folder that I had to remove:
\Windows\BtSdkCE30.dll
\Windows\BtCoreIf.dll
You can either ename them or remove them and then soft restart your Touch Pro 2/HD2 and everything will go back to normal.
Click to expand...
Click to collapse
Those are protected files, how can I delete those!?
XTREEM|RAGE said:
Idd I have the same problems, well that bluetooth 'crashes' and after a few min I get the message can't turn on bluetooth. I will report this to HTC (website), plz all of you, do the same, hopefully then can write an update for this!
Click to expand...
Click to collapse
Please could you send me the link to HTC so i can contribute to place the report.
Papagno said:
Please could you send me the link to HTC so i can contribute to place the report.
Click to expand...
Click to collapse
http://www.htc.com/uk/CS_Mail.aspx
or
http://www.htc.com/uk/about_htc_bymail.aspx
I've been searching and searching with no answers. Every thread on BT connection issues die off unsolved.
Well, hopefully this thread doesn't end that way.
I have a Jabra Cruiser 2 and early on it was the only thing I had paired. Press the connect button on the Jabra and my phone would connect right up with no user intervention. Later I flashed a couple other roms and found this auto connect stopped working. I don't think its worked since UnNamed 1.3 but not exactly sure. I also tried flashing different modems for a while but can't say if that matches up with this failing to work.
Does the modem have anything to do with BT?
Anyway, I've tried flashing ICScrewed 2.0.1 from scratch with a complete wipe of everything and it still doesn't work. I've flashed Entropy's last few DD's in a row and those didn't help either.
When Jabra is powered on and ready to connect my phone sits there saying "Paired" but doesn't try to connect on its own. I press the Jabra selection in BT Settings and it then changes to "Connected" and I can stream music through it. Even at this point I can't use the Jabra for telephone calls. I've made sure the options for music and telephone are checked under the Jabra settings.
...and yes I've deleted the BT pairing and paired from scratch. I did restore BT pairing once from Titanium but that was several roms and wipes ago. So unless it saves information to a folder, there shouldn't be any remnants.
Is there a folder somewhere that holds BT settings that can be wiped? Should I flash a new modem? Any ideas at all would be helpful at this point.
Nobody has problems with their BT? There has to be a way of clearing the BT settings from everywhere and pairing from scratch beyond the obvious.
Guess I set this thread up for failure by saying, I hope this doesn't die like every other BT thread.
...Maybe someday the BT problems of the I777 world will be solved.
Have you tried pairing your phone with any other BT device other than your Jabra Cruiser?
Have you tried going back to the same ROM (stock or otherwise) that used to work with your Cruiser?
That should narrow down the causes of your problem.
I use Jawbone headset and ever since I've started using it, I need to click it once to connect with my phone (I have set to turn off bluetooth automatically after every call.). But I don't have any problem with that.
Hi.
My phone fall into water, and i have dry it -> it works now after 10 days.
But, there is problem with WiFi & Bluetooth - when I want to turn bluetooth and WiFi on, they won't turn on.
In Settings - About phone -> there is no MAC adresses for WiFi & Bluetooth.
Can somebody help me what to do. I cannot use warranty because of "fall in water" problem.
Thank you.
Probably water damage.
You can try repairing the firmware with Update Service, however I am afraid it won't help.
[email protected] said:
Hi.
My phone fall into water, and i have dry it -> it works now after 10 days.
But, there is problem with WiFi & Bluetooth - when I want to turn bluetooth and WiFi on, they won't turn on.
In Settings - About phone -> there is no MAC adresses for WiFi & Bluetooth.
Can somebody help me what to do. I cannot use warranty because of "fall in water" problem.
Thank you.
Click to expand...
Click to collapse
Try what someguyfromhell said but youve most likely damaged your radio, in which case it wont work.
I can no longer activate the bluetooth of the watch. Strangely, it is still connected to the phone and everything works, but I can no longer connect my headphones and my cardio belt. Has anyone come across this problem before. is there a solution ?
Merci
Firmware update 4.2.3.0 don't change anything
https://youtu.be/TEBFZi0FCMM
Same problem. I can't pair phone with watch when I want using unlocking phone with Bluetooth.
Same problem, when I try to activate Bluetooth to pair it with my earphones, it says "Activating Bluetooth" and then "Bluetooth deactivated"
Same problem here. Can't pair with heart rate sensor (4.2.4.0 version). I send a mail to Amazfit, awaiting reply,
Same here, please see https://forum.xda-developers.com/smartwatch/amazfit/amazfit-stratos-3-bluetooth-earphones-t4052503
Anyone knows how to fix this?
It seems new update 4.2.5.0 fixed this, i had to turn WiFI first (earlier nothing worked).
k4hR said:
It seems new update 4.2.5.0 fixed this, i had to turn WiFI first (earlier nothing worked).
Click to expand...
Click to collapse
Can you please explain the steps? I'm unable to turn on wifi and therefore update the watch..
Hey,
i installed new update then tried to turn BT to check if it works now and it resulted in usual BT OFF, then i went to WiFi section, found my home network (had to type password in app) then i went back to bluetooth option and i was able to turn it on- i could find my HR belt in settings/accesories section of an activity.
edit, 02.04.2020:
today same problem as before- bluetooth keeps turning off
k4hR said:
Hey,
i installed new update then tried to turn BT to check if it works now and it resulted in usual BT OFF, then i went to WiFi section, found my home network (had to type password in app) then i went back to bluetooth option and i was able to turn it on- i could find my HR belt in settings/accesories section of an activity.
edit, 02.04.2020:
today same problem as before- bluetooth keeps turning off
Click to expand...
Click to collapse
Hi,
Can you try these steps?
Go to system Settings in the smartwatch.
Under Settings, scroll down list and tap "About."
Under "About," scroll down to "Legal Statement."
Continuously tap on "Legal Statement" until "Lab" appears below it.
Tap on "Lab" and select "Signal Strength."
Tap "Start." A Pass or Fail message will appear once the test is complete.
leugim1 said:
Hi,
Can you try these steps?
Go to system Settings in the smartwatch.
Under Settings, scroll down list and tap "About."
Under "About," scroll down to "Legal Statement."
Continuously tap on "Legal Statement" until "Lab" appears below it.
Tap on "Lab" and select "Signal Strength."
Tap "Start." A Pass or Fail message will appear once the test is complete.
Click to expand...
Click to collapse
I've just done the test and it passed OK.
However, enabling Wifi does not change Bluetooth behavior (still changes back to Disconnected)
theopulus said:
I've just done the test and it passed OK.
However, enabling Wifi does not change Bluetooth behavior (still changes back to Disconnected)
Click to expand...
Click to collapse
Mine has a different problem. When I run the test I get "Please retry".. you might have better chances that I do..
leugim1 said:
Hi,
Can you try these steps?
Go to system Settings in the smartwatch.
Under Settings, scroll down list and tap "About."
Under "About," scroll down to "Legal Statement."
Continuously tap on "Legal Statement" until "Lab" appears below it.
Tap on "Lab" and select "Signal Strength."
Tap "Start." A Pass or Fail message will appear once the test is complete.
Click to expand...
Click to collapse
I've tried the wifi connection trick, and it doesn't work.
Also, did the lab signal Strength test, and it says Fail. But I am able to connect to wifi, and to pair with the phone.
toffen said:
I've tried the wifi connection trick, and it doesn't work.
Also, did the lab signal Strength test, and it says Fail. But I am able to connect to wifi, and to pair with the phone.
Click to expand...
Click to collapse
It seems we are experiencing similar and related issues. Mine connects to the phone (using Bluetooth) but Bluetooth doesn't turn on (for earphones, etc.) and my wifi doesn't capture any network.
Already tried to factory reset several times and anything I can think of. Any suggestion is welcomed to try to fix this.
I will contact the Amazfit support again
leugim1 said:
It seems we are experiencing similar and related issues. Mine connects to the phone (using Bluetooth) but Bluetooth doesn't turn on (for earphones, etc.) and my wifi doesn't capture any network.
Already tried to factory reset several times and anything I can think of. Any suggestion is welcomed to try to fix this.
I will contact the Amazfit support again
Click to expand...
Click to collapse
Just to clarify, although the strength test fails for wifi, I am able to connect to a wifi using setting > connection > wifi.
Looking forward to see what they say to do. They told that I should contact my retailer to claim the warranty.
Any Updates
Any Updates
toffen said:
Any Updates
Click to expand...
Click to collapse
Not really.. The Amazfit support is not helpful.
I have installed the newest firmware using the instrucions on this forum but didn't fix it.
Found several people with the same issue in the forum but no fix..
Both bluetooth and wifi are not working for me. But I am able to connect to the app.
Hello, i have the same problem, see below the amazfit support answer
Hello There ，
How is everything going?
We have checked the log and sorry to tell your watch issue cannot be fixed online. Could you please kindly contact the seller directly to find a solution based on their warranty policy? If they need you to provide any evidence of the specific problems with your device, please let us know. We are more than happy to help! We appreciate your understanding and support!
I must send the watch to my seller to repair it.
thanks
Just to let You know, again new update 4.2.7.0 fixed issue for me, i can pair BT speaker and HR belt... Hope it lasts longer this time...
k4hR said:
Just to let You know, again new update 4.2.7.0 fixed issue for me, i can pair BT speaker and HR belt... Hope it lasts longer this time...
Click to expand...
Click to collapse
I am still on 4.2.6.0, when did you update?