im not able to turn on my bluetooth on my cell phone! i search and search for a patch or answer of why this is happening but i still havent figure it out. To be more specific i go to comm manager communication and click on the turn on bluetooth and it doesnt go on. i also tried going to setting connection and click turn on bluetooth and than ok and it wont go on i tried everything to get it to go on! i did a hard reset a week ago for this reason to fix the bluetooth issue it worked but now it doesnt again. please help me!
Hello guys
My Sony Xperia Sola was perfect until i updated to ICS. ICS is very fast,smooth and beautiful software but since then i am experiencing a wifi problem. My wifi get frozen and stuck to connected. I can't disconnect it. The only way to disconnect it is to switch of the phone. I foundnd a "solution" to this problem. Problem seems to disappear if you make a factory reset of the phone. But after a week it comes again. It's so annoying. My "solution" is to make back up-and restore once a week to avoid the problem. If i didn't do the factory reset problem comes again. Is there any solution to this issue? I heard a lot who have this problem after updated to ICS(problems appears and to xperia u)
Thank you
Patrokloscy
Please post Q&A in the appropriate section next time
Thread Moved
Any solution guys??
Change the wireless interface on your router to be 802.11 b/g only - not b/g/n
that helped me!!
sola wifi prob
i have the same problem, i restart, format, anything, but the wifi still doesn't turns on.
even at the first startup screen, i clicked connect only using wifi, than i select network, after that it just stuck there and the wifi will not turn on forever...
i had formatted my phone at least 3times today...
can any1 tell me y???
and how to fix it???
credit to @[email protected]
flash ur device using flash tool, it can be found in the forum too, and it shall be fine after that, just dont know that how long it can last...
same issue
I completely understand the original post.
I don't want to bother with any routers, 'cause it had been working fine before. It mustn't be a question of router settings.
Some software upgrade of the phone might have caused this problem and I'm still waiting for any reply from Sony on this. If they don't do anything in a month I'm gonna push this **** device to a repair station, though I don't feel much desire for the mess that comes with this procedure.
Generally the phone is very slow (and sometimes it opens the phonebook instead of call list, sometimes it take 10 secs, etc.), I wanna get rid of it but I have to wait till the end of my telephony contract's period.
Hello, i wanna ask? How to fix wifi and bluetooth that can not scan at all. When tried to press the button, just twinkle just can not scan it. So, please help how to fix this case... thanks
I think there's no help. It's the hardware damage. Go to service.
hello,
I have a POS (point of sale) brand is uaccept mb3000 that is on android 4.2.2 and was able to root it through kingroot. it has a wifi toggle in settings but everytime I turn it on it goes back to off, was able to get bluetooth to show up in settings through build.prop, but the same thing is happening, it goes back to off when turned on, my question is do you think the manufacturer disabled it? is there a way to enable it? I wanted to turn on bluetooth if possible to use a square pos reader. or if I flash a new rom to it will bluetooth and wifi be working? it has 5 usb ports but I can only use them for mouse and keyboard. I need help asap please. thank you.
I can no longer activate the bluetooth of the watch. Strangely, it is still connected to the phone and everything works, but I can no longer connect my headphones and my cardio belt. Has anyone come across this problem before. is there a solution ?
Merci
Firmware update 4.2.3.0 don't change anything
https://youtu.be/TEBFZi0FCMM
Same problem. I can't pair phone with watch when I want using unlocking phone with Bluetooth.
Same problem, when I try to activate Bluetooth to pair it with my earphones, it says "Activating Bluetooth" and then "Bluetooth deactivated"
Same problem here. Can't pair with heart rate sensor (4.2.4.0 version). I send a mail to Amazfit, awaiting reply,
Same here, please see https://forum.xda-developers.com/smartwatch/amazfit/amazfit-stratos-3-bluetooth-earphones-t4052503
Anyone knows how to fix this?
It seems new update 4.2.5.0 fixed this, i had to turn WiFI first (earlier nothing worked).
k4hR said:
It seems new update 4.2.5.0 fixed this, i had to turn WiFI first (earlier nothing worked).
Click to expand...
Click to collapse
Can you please explain the steps? I'm unable to turn on wifi and therefore update the watch..
Hey,
i installed new update then tried to turn BT to check if it works now and it resulted in usual BT OFF, then i went to WiFi section, found my home network (had to type password in app) then i went back to bluetooth option and i was able to turn it on- i could find my HR belt in settings/accesories section of an activity.
edit, 02.04.2020:
today same problem as before- bluetooth keeps turning off
k4hR said:
Hey,
i installed new update then tried to turn BT to check if it works now and it resulted in usual BT OFF, then i went to WiFi section, found my home network (had to type password in app) then i went back to bluetooth option and i was able to turn it on- i could find my HR belt in settings/accesories section of an activity.
edit, 02.04.2020:
today same problem as before- bluetooth keeps turning off
Click to expand...
Click to collapse
Hi,
Can you try these steps?
Go to system Settings in the smartwatch.
Under Settings, scroll down list and tap "About."
Under "About," scroll down to "Legal Statement."
Continuously tap on "Legal Statement" until "Lab" appears below it.
Tap on "Lab" and select "Signal Strength."
Tap "Start." A Pass or Fail message will appear once the test is complete.
leugim1 said:
Hi,
Can you try these steps?
Go to system Settings in the smartwatch.
Under Settings, scroll down list and tap "About."
Under "About," scroll down to "Legal Statement."
Continuously tap on "Legal Statement" until "Lab" appears below it.
Tap on "Lab" and select "Signal Strength."
Tap "Start." A Pass or Fail message will appear once the test is complete.
Click to expand...
Click to collapse
I've just done the test and it passed OK.
However, enabling Wifi does not change Bluetooth behavior (still changes back to Disconnected)
theopulus said:
I've just done the test and it passed OK.
However, enabling Wifi does not change Bluetooth behavior (still changes back to Disconnected)
Click to expand...
Click to collapse
Mine has a different problem. When I run the test I get "Please retry".. you might have better chances that I do..
leugim1 said:
Hi,
Can you try these steps?
Go to system Settings in the smartwatch.
Under Settings, scroll down list and tap "About."
Under "About," scroll down to "Legal Statement."
Continuously tap on "Legal Statement" until "Lab" appears below it.
Tap on "Lab" and select "Signal Strength."
Tap "Start." A Pass or Fail message will appear once the test is complete.
Click to expand...
Click to collapse
I've tried the wifi connection trick, and it doesn't work.
Also, did the lab signal Strength test, and it says Fail. But I am able to connect to wifi, and to pair with the phone.
toffen said:
I've tried the wifi connection trick, and it doesn't work.
Also, did the lab signal Strength test, and it says Fail. But I am able to connect to wifi, and to pair with the phone.
Click to expand...
Click to collapse
It seems we are experiencing similar and related issues. Mine connects to the phone (using Bluetooth) but Bluetooth doesn't turn on (for earphones, etc.) and my wifi doesn't capture any network.
Already tried to factory reset several times and anything I can think of. Any suggestion is welcomed to try to fix this.
I will contact the Amazfit support again
leugim1 said:
It seems we are experiencing similar and related issues. Mine connects to the phone (using Bluetooth) but Bluetooth doesn't turn on (for earphones, etc.) and my wifi doesn't capture any network.
Already tried to factory reset several times and anything I can think of. Any suggestion is welcomed to try to fix this.
I will contact the Amazfit support again
Click to expand...
Click to collapse
Just to clarify, although the strength test fails for wifi, I am able to connect to a wifi using setting > connection > wifi.
Looking forward to see what they say to do. They told that I should contact my retailer to claim the warranty.
Any Updates
Any Updates
toffen said:
Any Updates
Click to expand...
Click to collapse
Not really.. The Amazfit support is not helpful.
I have installed the newest firmware using the instrucions on this forum but didn't fix it.
Found several people with the same issue in the forum but no fix..
Both bluetooth and wifi are not working for me. But I am able to connect to the app.
Hello, i have the same problem, see below the amazfit support answer
Hello There ，
How is everything going?
We have checked the log and sorry to tell your watch issue cannot be fixed online. Could you please kindly contact the seller directly to find a solution based on their warranty policy? If they need you to provide any evidence of the specific problems with your device, please let us know. We are more than happy to help! We appreciate your understanding and support!
I must send the watch to my seller to repair it.
thanks
Just to let You know, again new update 4.2.7.0 fixed issue for me, i can pair BT speaker and HR belt... Hope it lasts longer this time...
k4hR said:
Just to let You know, again new update 4.2.7.0 fixed issue for me, i can pair BT speaker and HR belt... Hope it lasts longer this time...
Click to expand...
Click to collapse
I am still on 4.2.6.0, when did you update?