Please help me,
I´m new in the forum, and since 3 days I´m searching for the rigt answer for my problem, but I can´t find anything.
I bouth an used Vario II with boot problems, the PDA is booting until this screen and then after 10 second it reset by itself. After Reset the PDA boot again the same screen.
I can´t go into Bootlader (Bootloader mode: Hold side OK and POWER buttons together and reset with stylus) or to the other screens, I can only do the Hardreset, but it doesn´t help anything.
I want to flash a new ROM on it (WM6), can someone help me ???
(sorry for my bad english)
Related
Hello,
I've a working OS 6.0 and beeing using it for last few months. I've done reformat with the same rom 2-3 times in between. Never had a problem until last night. I resetted the device after upgrading the rom and the screen was stuck on boot screen for long time. So, I did a bootloader mode (Camera key + softreset ) , which didn't come up. Nothing comes up now , and it drains the battery. Thats all I see.
Please help me with this issue.
thanks.
does you phone still turn on?are you sure you didn't flash a g3 bootloader on a g4 chip?that could brick the phone
Yes, it does turn on & stucks back in bootscreen. I can recharge the battery and all, but can go no farther. I've used the same rom before and worked fine everytime. So, I find it quite strange not to work now.
try flashing another compatible rom..or the original rom and them flash your wanted rom again..be carefull NOT TO FLASH A G3 ON A G4
Woohoo!! Got it working by changing USB port and retrying the bootloader mode. Worked fine. I think it's actually the Key combination bootloader mode that takes a little getting used to
Thanks all for your reply.
your welcome....have a nice one and enjoy yourr functional wizard
Thanks !
Wizard
Hello
I need help with my wizard !!!!!
i´ve tried to put a new Rom, mas the process stops sudenly.
and now i have the 3 colors , and i can´t do nothing.
can someone help me??????
regards
hugo
NO need to worry. Just go to your bootloader mode. For MDA Vario its Camera + softreset key.
Than reinstall with a working rom.
hugomalheiro said:
Hello
I need help with my wizard !!!!!
i´ve tried to put a new Rom, mas the process stops sudenly.
and now i have the 3 colors , and i can´t do nothing.
can someone help me??????
regards
hugo
Click to expand...
Click to collapse
Which version do you have? G3 or G4? Is it SIM\CID unlocked?
hugomalheiro said:
Hello
I need help with my wizard !!!!!
i´ve tried to put a new Rom, mas the process stops sudenly.
and now i have the 3 colors , and i can´t do nothing.
can someone help me??????
regards
hugo
Click to expand...
Click to collapse
Download and flash official Rom in bootloaders (3 colors) screen,it'll recover back to normal.
Any news about ur Mda?
Hi. I have HTC P3300 with Shell.5 by flecky Spanish Rom and when i flashed it worked for 2days and now i can't boot it. I tried to enter bootloader but i can't. Tried Soft Reset and Hard Reset too and nothing. Pleeese help me
It is stuck on boot screen. Can someone help me solve this problem?
See pic in attachment
IPL 1.12.0001
SPL 1.11.cmon
GSM 03.07.90
OS 3.13.0.0
Thanks...
I don't know how to fix this problem but i read that many cases that the processor heats up the phone and the phone will not turn on! Guys write that this phone can power only in cold areas! Try to turn on air conditioning to coldest mode and leave your phone for 2 hours then try to turn on it!
NOTE: If there is another problem with your phone I'm not answer for problems!
Hi,
after trying to install beats audio my lg p710 has bricked, I performed an hard reset (vol down, power, home) but still it won't go to the setup wizard. I can only turn it off by removing the battery.
I have very little knowledge of android but for what I've understand I need to put the phone in download mode and flash the entire stock firmware.
Can you guys help me? I haven't found guides about this phone since it's quite new.
English is not my first language but I hope it's understandable.
edit: actually it's not "bricked", it's in bootloop
marchrius said:
Hi,
after trying to install beats audio my lg p710 has bricked, I performed an hard reset (vol down, power, home) but still it won't go to the setup wizard. I can only turn it off by removing the battery.
I have very little knowledge of android but for what I've understand I need to put the phone in download mode and flash the entire stock firmware.
Can you guys help me? I haven't found guides about this phone since it's quite new.
English is not my first language but I hope it's understandable.
edit: actually it's not "bricked", it's in bootloop
Click to expand...
Click to collapse
Have you read or search int other section of this forum?? maybe you may try this http://forum.xda-developers.com/showthread.php?t=2284822 but DO WITH YOUR OWN RISK.
I think the method more or less similiar,the different just about the STOCK FIRMWARE,choose for your model here http://lg-phone-firmware.com/index.php?id_mod=21.
Don't forget for driver here http://csmg.lgmobile.com:9002/client/app/B2CAppSetup.exe.
You can read more in the bottom section from the thread i've said above in the "UNROOTING OR FLASHING STOCK FIRMWARE", don't forget to use firmware for your phone model.
emergency mode=(When phone is off) hold the volume "down" and insert the USB cable (Will Have Yellow Screen)
Hope this will work.
Done! Thanks, problem solved. I flashed the stock firmware and everything now is working again. Good thing that emergency mode still worked.
lg l7 p715
my lg l7 p715 stay in bootanimation cuz i was a fool, i deleted a file system so now it just stay in boot animation... i know i have to flash it with kdz but i couldnt install the drivers cuz the phone does not start... i tried with the yellow screen... what can i do??? i was looking for something but i just found this post... i am not sure what to do... whats better for doing this, xp or win7?? thx for everything :good:
PD: my english s*ck...
Dear Friends,
I have viewsonic viewpad 70n pro and that stuck on booting (stuck on 3 birds logo). I would like to tell that, there is no volume buttons but only Reset and power buttons so i am bit confused about the hard resetting or entering into recovery mode.
I am attaching the picture of my 7" tab so you will understand about the tab which i am talking about.
Thanks in advance and excuse for my bad English
Best Regards
Xainu
Happened the same to me, but i found the solution
Xain2 said:
Dear Friends,
I have viewsonic viewpad 70n pro and that stuck on booting (stuck on 3 birds logo). I would like to tell that, there is no volume buttons but only Reset and power buttons so i am bit confused about the hard resetting or entering into recovery mode.
I am attaching the picture of my 7" tab so you will understand about the tab which i am talking about.
Thanks in advance and excuse for my bad English
Best Regards
Xainu
Click to expand...
Click to collapse
Hey Xainu, I found the solution, can u try to put a pin in the reset hole and hold like for 10seconds..and the viewsonic tablet will get reset to and will appear in japanese or chinese ..lol whatever that language is good luck .. hope it works for you:laugh:
kickace7 said:
Hey Xainu, I found the solution, can u try to put a pin in the reset hole and hold like for 10seconds..and the viewsonic tablet will get reset to and will appear in japanese or chinese ..lol whatever that language is good luck .. hope it works for you:laugh:
Click to expand...
Click to collapse
Same problem here, try resetting it the tablet shut off...power on again same problem help!!
same problem. where can i find firmware?
Hello everyone. This is a long story, so thanks in advance to read it and try to help me.
I've got a Trekastor surftab Ventos 8.0 this one --> http://www.trekstor.de/detalles-de-surftabs/product/272.html?file=tl_files/generatedPdf/272-de.pdf
model st80208-2 . I'm not sure if it is the 8 or 16 GB. And I don't know how to check it because the tablet is bricked.
How did I brick the tab?
This is a good question. I had lost the charger and I tried with another one with a higher voltage. This ruined the batery. And when I found the charger the tablet show a strange behaviour. It was trying to start but reboot before to finish. I was able to finish a full boot but the batery only works for a few minutes. After solve the batery problem, now I can start the tablet without problem about the voltage but, it seems like all this failed attemps to boot have made some damage somewhere.
What I have now?
The tablet start. It show's the trekstor logo. After that it show's the android logo, and that's all. It stuck's looping in the android logo.
What I have tried?
Everything.
1.- Custom recovery. http://forum.xda-developers.com/showthread.php?t=2039964 or this http://forum.xda-developers.com/showthread.php?t=1995984
This method not working in my tablet even when it was not bricked. (I tried it, when I was trying to get root access a month ago).
Power + Volumen (-) gets nothing at all. It's start normally. (and loop in my currently situation)
Power + Volumen (+) gets this screen http://cdn.howtogeek.com/wp-content/uploads/2012/12/android-recovery-mode.jpg and anything happens no matter what button I'm pressing even with the custom recovery in the sdcard.
2.- I tried to flash the tablet, but I didn't find information about how to do it and trust me, I have searched a lot.
I triend with this software: "Amlogic Image Burning Tool v.1.6.2.2" and this firmware http://forum.xda-developers.com/showthread.php?t=2039964 . But I get the error "find no upgrade config, please load it manually". I'm pretty sure I doing something wrong, but I have no experience with this software or flashing in general.
That's all for now I'm tired of reading this forum and this other one in german. (thanks to google translator) http://www.android-hilfe.de/surftab-ventos-8-0-forum/ and I did not find anything useful for me
You people are my only hope. (Any Star wars fan in the room?:laugh:
So any help would be wonderful, thanks in advance and sorry for my mistakes, english is no my mother language.