Germany Tytn - strange wm6 - 8525, TyTN, MDA Vario II, JasJam Software Upgradin

hi there, i have received a tytn from germany, it had wm5 in germany,i did sim and cid unlocker and flashed it with hardspl7 to put shaps portuguese rom.
the thing is, every time i put a wm6 rom the tytn freezes at htc splash screen.
to unbrick it, i have to put an wm5 rom with 1.04 spl and it freezes again at splash screen, this time saying "No GSM", have to flash a radio rom and it backs to normal.
i dont know what i can do to tytn loads a wm6 rom...
It is impossible to flash wm6 in this tytn??
thank you all

i'd say... it's definately wrecked... i got a german-tytn myself and it's working fine under wm6
sure u're not using a pre-branded device?

no, its a htc tytn - hermes 200... its working 100% with wm5.
but with wm6 it doesnt pass the splash screen...
its not the first time i upgrade a tytn, but this is happening for the first time, its really strange.... i dont what i can do more..... any help?
thank you

Any help please??
Thanks

Related

Jamin rom downfall

I tried to upgrade my imate jamin s200 to smart1_wm6_pp8mb. since the operation did not finished I unplugged the usb cable, therefore the machine didn't work and opening now. now some messages are appearing on the screen (IPL:2.15.0001; SPL 2.15.0001; GSM 02.19.21; OS:10.1.0.811)
i need your urgently help... How can i fix it this problem and upgrade my rom again?
Put your Jamin into bootloader mode (camera button hold+softreset with stylus), connect it via USB (not on a hub!!!!) with your PC and try to flash the last update of Qtek, Orange, iMate or something else you like! If your device booting after this correctly you can re-try the flash to WM6!
I switched yesterday many times between Qtek 2.20 Ger, Orange UK, O2 Ger nd smart1's clear WM6 and had no problems during this!
Thank you very much, could you plase upload here i cant find the last update ,
i''m waiting you..
i dont know what is my qtek last update How can i learn it?
When you want to know what ROM you have flashed to your device, go to Start -> Settings -> System -> Device Information! Here you can find all information you need!
By the way: the latest Qtek update for the S200 is 2.20! You can find it trough Gooogle or the board search! Good luck!
animelover said:
Put your Jamin into bootloader mode (camera button hold+softreset with stylus), connect it via USB (not on a hub!!!!) with your PC and try to flash the last update of Qtek, Orange, iMate or something else you like! If your device booting after this correctly you can re-try the flash to WM6!
I switched yesterday many times between Qtek 2.20 Ger, Orange UK, O2 Ger nd smart1's clear WM6 and had no problems during this!
Click to expand...
Click to collapse
Hi animelover,
Just a question...Do you use the OS extract tool to flash only the os without changing the IPL/SPL, or the roms that you wrote about have no IPL/SPL upgrade? I mean did you fash directly or you flashed only the extracted OS?
Thanks!

QTEK S200 G4 problem!!!

Maybe this thread already been posted, please help me!!!
I took Qtek S200 used one, and the old host said he had problem with upgrade. I can't upgrade myself, and give it to master, master can't solve the problem, but when I came back and put it to upgrade with "220734 WWE ship" version it did well and I had working device for week, then it freesed once more, since I can do nothing. initially it has IPL 2.09.001 and SPL 2.20.0001, I did the program posted here - IPL upgrade and now I have IPL and SPL 2.20.0001. Phone enters bootloader normally, upgrade only with "220734", others doesn't go. When I switch it in normal mode it freeses as white screen on "Windoes mobile" screen, sometimes it goes further but final picture one - freesing.
Wait for Your advices.
P.S. In my city no official cervice...
Try a different ROM...
Put the device in bootloader,disable connect through USB in active sync, and run the RUU from a different ROM...

Help with HardSPL please

Hey, i recently purchased a HTC Prophet (branded SPV M600 from orange) from a friend.
Since then i managed to get a WM6.1 rom on (shadow 2 i think)
Anyway, back when i did this, i found it very hard.
My prophet is not hardspl'd and i've having trouble changing the rom.
In my effort to change it, i 'bricked' it, however recovered it using one of those WM5 roms.
So my details:
IPL 2.20.0001
SPL 2.10.0001
GSM 02.07.20
Currently i'm running a WM5 rom, however i have managed a WM6.1 rom before, but cannot seem to do it again, whenever i get it installed it just boots to the bootloader.
When trying to HardSPL it just gives generic cannot connect errors.
I've used Prophet Tools aswell as manual guides but to no avail.
Am i doing something wrong?
And btw i'm using WinXP
Cheers, James
Hey, turns out i wasn't following instructions properly - probably due to my tiredness!
I wasn't pressing the camera button on white screen... DOH!
Problem now solved and running 'Vista Clean'
Cheers,
James

problem with orange spv m3100 herm 100

hi I am a new consumer and I have an orange spv m3100.. you excuse my English but I am Italian..
my problem is that this telephone always shows no gsm and there is no way to resolve it. if I try to put a radio it jams to the 0% I don't have guarantee the only possible thing it is flashiarlo it is the part of the operating system...
orange spv m3100
ipl 1.04
spl 2.10 olipro
no radio thk
uuuppp hheellpp me!!!
Try to flash the Shipped rom - the rom it originally came with. You can also try just the radio rom (I'd try after the shipped rom though). If these 2 things don't work then it is because the radio rom area of memory has been corrupted... Long story short, flash an os only rom on and you have a PDA you can use but you wont EVER be able to use as a phone again.... Sorry...
Make sure you have Hard SPL installed first as flashing the radio rom is the riskiest thing to do, & if you want any chance of recovery, you should have this installed...
Cheers...& good luck...
thanks for his/her answer even if I have understood few being Italian.... cmq I have already put above a hard spl and I don't succeed equally to perform the flash

Looking for Swedish ROM for a G4 Qtek S200

My dear ol' Qtek is Stuck in bootloader screen (tri-color) after a flash gone bad.
From what I can gather in the forums (and wiki) I need the vendor ROM to put it back on it's feet again.
Today the Boot reads.
IPL 2.10
SPL 2020.0001
I have tried the NVID ROM, it runs (with the progressbad going red a few times on the phone) once it's done the phone resumes the taunting boot-screen with the same information as above.
I have tried the G4 SPL update and the updated passes with no errors, and the Qtek boots in an ALL GREEN screen with the same IPL.SPL as above.
I know the original OS was Swedish, but I cannot find one anywhere.
What are the alternatives from here?? Thankful for any help I can get.
Here
I´ve uploaded it for you on Rapidshare.
It´s the original ROM from the old Qtek webpage.
http://rapidshare.com/files/239173872/663566-s200_upgrade.zip.html
Hoppas det funkar.....
Link doesnt work, anyone have this swedish rom?
I could need this as well. Anyone with a swedish original rom?

Categories

Resources