Hi,
can i use the LCD of a HTC Harrier unit to replace a broken Blue Angel LCD?
Thanks.
well, basically I believed they have the same size but they have different film at the back of it so it is not compatible....
Related
one of the main factor for me to opt for blue or white s3
what do you think ?
I believed it won't turns yellow
Can't be as bad as HTC One X that seems to absorb all surrounding colours.
for white s3 I don't know, I have peble blue now.....
but before s3 I had white one x, it really absorb colors... for example when touched
with ballpoint tip...
I have a T-Mobile HTC Amaze 4g boot up with white noise. The Lcd turn's on, but no sound and no image's just white noise(static).
Notes:
I have updated the software to ICS and rooted the phone with s-off.
Also I opened the phone to clean the front camera, and no I didn't cut or broke any internal robins.
I did however used a dust blower to clean the dust.
I have a pebble blue s3 and I never really liked the look of it.
I prefer the sapphire black but it wasn't available yet when I bought the phone.
Now my screen has died on me and has to be replaced.
Can I use a Black LCD display touch screen digitizer +frame as a replacement on my pebble blue phone?
I see no problem in doing so but I hope anyone can confirm this before I order it.
Thanks in advance
Yes you can use the black.
It's exactly the same.
Good luck.
Send From A Devil3 - f2fs - Dualboot Powered Machine
After replacing lg v10 screen, i tested the device thoroughly.
Device works fine with a new LCD screen as long as not all components are connected (e.g. front camera en 3.5 mm jack)
The problem i keep getting with the LCD is:
1. Connect 3.5 mm jack and LCD screen blacks out.
2. Screw on back panel and LCD screen blacks out.
3. When charger is connected LCD screen blacks out immediatly.
In all three situations the LCD black outs and if it turns on you see white lines on the right side of the screen.
If you thighten the screws too hard the LCD screen also in black out.
If you plug in the charger the lcd immediatly goes black.
Now I wonder where the problem lies. Is it the LCD screen or motherboard.
PS: this was a water damaged phone which was repaired by a store with industrial equipment.
My HTC m8 screen start to flicker and there are some vertical shadows dancing mostly unseen on black background so I'm planning to buy a replacement from ebay is that only a digitizer issue ? or I should have the lcd switched ?
is that a suitable replacement ? http://www.ebay.com/itm/Genuine-HTC...937697?hash=item5d61278221:g:nZkAAOSwIgNXlKu5