[HELP] Please help me dump full flash ROM of HP rw6815 & rw68x8 - iPAQ rw6828, XDA Atom Software Upgrading

Because my device error with RUU so that I can't flash my device with PC.
Please help me dump full flash ROM of HP rw6815 & rw68x8.
ROM HP rw6815 & rw68x8 you can download here :
-HP iPAQ rw6815 WWE ROM : ftp://ftp.hp.com/pub/softpaq/sp35501-36000/sp35815.exe
-HP iPAQ rw6818/rw6828 WWE ROM : ftp://ftp.hp.com/pub/softpaq/sp34001-34500/sp34074.exe
And here is ROM Dump tools : http://www.mediafire.com/?94t1m1me641
Download this file then copy to your device and run it, it's will dump recent ROM to miniSD card with name : romdump.bin
Please help me upload to http://www.mediafire.com
Thank so much !!!!
P/S : with full flash ROM we can restore HP68xx to WM5 :
-Rename romdump.bin to flash.img
-Copy to miniSD card.
-Go to Bootloader and it will flash your device automatic.

Everyone who have rw6815 & rw68x8 please help me !!!

no need to do so . cut first 12bit header me the diskimage_ver.nb0. and rename to diskimg.nb0,flash it using sd card .

if we do it by the way told , how can we get the right serial number in hp asset viewer ?

Related

HELL: MODEL ID ERROR

Dear all,
my xdaii from1.52.00CHT 10/23/03 1.08.00 1337.18 1.52.118)
used "Xda_II_Upgrade_v16050.exe" update to Eng. ver. but it death at:
Stage1:Earaing Rom image. please wait.... my xda2 now show "USB v1.06" only. I tried meny version to re-upgrade, but it show "ERROR 100: MODEL ID ERROR 1-N-PH-PH-PH"; and I create a sd card image from my other working xda2(1.52.00CHT, bootloader v1.03) by a terminal program via seiral cable type 'd2s', insert this sd card to death xda2 and put xda2 to "Serial v1.06", wait a few time it show "SD Download Section=1 No allow update!".
Can any body to help me ?
thanks a lot !
kaceda
Upgrade
Try with 1.72 ROM
It seam to be the only one that you can put on your device when you have PH-PH-PH error.
Hope these healp you.
Regards.
MODEL ID ERROR
Dear Gibbo,
:lol: Thanks for your reply, but I tried run "ruu172104wwe_t_mobile-uk.exe" it show "ERROR 120: COUNTRY ID ERROR 1-1-3-3-3" and run "ruu172126wwe_imate.exe" then it show "ERROR 120: COUNTRY ID ERROR 1-1-8-8-8".
Thanks & Regards,
kaceda
http://forum.xda-developers.com/viewtopic.php?t=8606&highlight=
kaceda have you fixed your devaice with above link?
I haven't.
Keep trying with the 1.72 ROM and change and/or delate Country code, Langage and ID Model.
Good look! and Ciao.
How To update ExtRom ?
I create a sd card image from my other working xda2(1.66.00wwe,1.08.00,1.66.165, bootloader v1.06) by a terminal program via seiral cable type 'd2s', insert this sd card to death xda2 and put xda2 to "Serial v1.06", press power buttom,wait a few minutes, it show "Checksum OK". Gread !!! I did a hard reset, It work !! But some application show disorderly code, i check it all version, it show (1.66.00wwe,1.08.00,1.66.174,bootloader v1.06), So I think this way update CE rom only n ExtRom(Chinese ver.) did not change.
Any body can help me how to update the Extention Rom only?
Meny thx Gibbo n cairo31male n all !
Regards,
kaceda
To update the extended ROM the EASY way:
1. Just copy all the contents of your working XDA's Extended ROM to your PC via ActiveSync or to an SD card,
2. Delete all the files in the Extended ROM of the device you which to upgrade,
3. Put the files you copied in step 1 in the empty Extended ROM.
4. Hard Reset.
That's it. You will have the desired Extended ROM, and you will notice that the version will have changed.
In case you do not know how to access Extended ROM through ActiveSync or File Explorer, have a look at the following post and download the ExtendedROMUnlocker.arm.CAB:
http://forum.xda-developers.com/viewtopic.php?t=8422&highlight=
update the extended ROM
Thanks cairo,
But I wish reflash wwe version ExtRom to xda2, hard rest xda2 the ExtRom not change. I tried usd HimaUpgradeUt to flash ms_.nbf into xda2, but many many times all failed, do you know how to used SD card method to dump ExtRom from xda2 and reflash it to xda2? CE rom have been worked ! how about ExtRom ?
Regards,
kaceda

UPGRADE MDA 2/XDA 2 BY SD CARD AND MY OWN ROM

Please explain me how can I do upgrade windows ce in my MDA 2.
Step by step. Need I special program to format sd card ? What is country ID problem in this case. When I try upgrade directly ( USB ) then see :
error geting device data. File getdevdata.exe - kill my system and MDA display only bootloader screen ( serial/usb , v1.03 ). Thanks for advice....
the rom KITCHENs are ONLY!!!! for xda1 never xda2
Whats a pity ! Unluckily certain You have right. So, how can I prepare my own ROM. Means best like rom kitchen but not necessarily. I know about Extennded ROM Editor (by the way:the password (e.g. HTC) will be wrong:.......). Thanks for reply

Can someone guide me how to upgrade my XDA 2 to WM2003

my current device info
ROM version : 1.66.00WWE
ROM date : 02/20/04
Radio version : 1.08.00
Protocol version : 1337.18
ExtROM verion : 1.66.165
Bascially, i need guidance on which/where to download the WM2003 ROM, and also procedure how to backup to SD RAM, and how to recover from SD if there is any failure.
I also need to know what i need to do before upgrading the ROM.
appreciated
Keith
http://forum.xda-developers.com/viewtopic.php?t=14489&highlight=
1.66 is
2003
do you mean 2003SE ?
i think he means wm2003se
Yeah , i am requesting a guide of how to upgrade to WM2003SE
I from Asian, therefore would like to look for asian rom.
my first step is .. where / which file to download.
my second step is know which file to edit
my third is to know how to backup my current rom to SD, also how to recover back if fail
thanks
keith
how to upgrade to WM2003SE
try this link
"Customized WM2003SE Extended ROM - Asian Edition Version 2"
http://forum.xda-developers.com/viewtopic.php?t=13795
and this
"Genuine English WM2003 SE upgrade for Himalaya uploaded here"
http://forum.xda-developers.com/viewtopic.php?t=13588
semoga sukses
i have seen this thread b4 posting it but the guide is not so clear
i need very clear explanation of how to flash, backup etc
also editing the rom before flashing
added backup link into wiki :
http://wiki.xda-developers.com/index.php?pagename=HimalayaRomkitchen
keithhiap said:
my current device info
ROM version : 1.66.00WWE
ROM date : 02/20/04
Radio version : 1.08.00
Protocol version : 1337.18
ExtROM verion : 1.66.165
Bascially, i need guidance on which/where to download the WM2003 ROM, and also procedure how to backup to SD RAM, and how to recover from SD if there is any failure.
I also need to know what i need to do before upgrading the ROM.
appreciated
Keith
Click to expand...
Click to collapse
ur ROM version : 1.66.00WWE, it is WM2003
so u need ROM version : 2.06.00WWE (WM2003SE)
my advice, better dun try the ROM version : 2.20.00CHC (not much review i got)
goto google.com, search "WM2003SE".. u will see this..
en.PDAMobiz.com: XDAII : How to Upgrade WM2003SE
... Topic: XDAII : How to Upgrade WM2003SE, ... XDAII : How to Upgrade WM2003SE. ... (Thanks
to itsme, xda-developer). WinZip or WinRAR. WM2003SE ROM. ...
en.pdamobiz.com/en/forum/ forum_posts.asp?TID=143&PN=1 - 79k - Cached - Similar pages
http://en.pdamobiz.com/en/forum/forum_posts.asp?TID=143&PN=1
here's the steps..
PRE-PREPARATION
Backup you own personal data (only data), because this will required a hardreset
Backup you own ROM ... see more
REQUIRED TOOLS
Special HimaUpgradeUT.exe. (Thanks to itsme, xda-developer).
WinZip or WinRAR
WM2003SE ROM
There are three WM2003SE Rom including V2.02, V2.06 and V2.20 Chainease Version available at the moment. According to our experiences, I would recommend you to use V2.06 with Radio 1.18. There are also many download links containing ROM2.06 with Radio 1.18. Select anyone you prefer.
Rom with Australian ExtROM - Special Thanks gave to Sin
Rom with Asian ExtROM - Special Thanks gave to ZeroXtreme
HERE WE GO;
1. Extract Your prefered ROM using WinZip / WinRAR then you will see 6 files and one folder as follows:
HimaGetDeviceData.exe
HimaClearJumpCode.exe
HimaUpgradeUt.exe
ms_.nbf
NK.nbf
Radio_.nbf
2. Extract the special HimaUpgradeUt and replace the old one again in that folder.
3. Stop ActiveSync (wcescomm.exe) via the Task Manager (Ctrl + Alt + Delete)
4. XDAII: Go to Bootloader Mode by pressing Power Button + Reset + Directional Pad in the same time. You will see a "Serial" "1.0x" on your device screen.
5. Plug your device into credle, neglect any usb detection on your PC. Then double click at HimaUpgradeUT.
Enjoy Waiting !! and Good luck
my device info:
ROM 2.06.00WWE
u might need some Extended_ROM for ur own needs.
recommendation: IntelliDial & IntelliPad
http://forum.xda-developers.com/viewtopic.php?t=13708&highlight=
:wink:
http://forum.xda-developers.com/viewtopic.php?t=14489&highlight=
complete and detailed steps here.....

UPGRADING ROM (Newbie !)

Hello,
My SPV M1000 (Himalaya) has WM5, and i was thinking about upgrading to Windows Mobile 6. But there were a few questions as i'm new to all this !
1) Which is the best WM6 ROM to use as there seems to be a few ?
2) How do i upgrade the ROM ???, (in English please as i'm not very up on all this!). Do i download the ROM to my SD card and run the .exe from there on the Pocket PC (or on the home computer) ?
3) Are these ROMs reversible incase there is some kind of error ?
I'm having issues with the phone feature on my M1000 (phone wont work at all !), so i am hoping an upgrade to WM6 (or even reflashing the ROM to WM5 will solve this ?
Best Regards,
Andrew
1 matter of taste as the diff is in general which programs are preinstalled in the rom
2 all roms rar or zip packet include a readme.txt which describe step by step how one install them and all any of us can do is to copy paste the content of that file..
Ahh, cheers for the info Rudegar !. Much appreciated,
Andy

Missing ROM Flashing on Atom Exec

Hi, all.
I was missed the ROM Flashing. After I downloaded the SonBlack 20758 Rom and Run UpdateUtility, I found that I forgot to move all file to c:\windows\temp and I have the old rom for HP6828 stored in that folder. After I flashed my Atom Exec, now my boot screen is always flash every 3 seconds with HP screen. And I can't get into the bootloader by pressing camara+reset. Now I need to re-flash into Atom Exec, what can I do? Everybody please help me in this problem.
Pls use original rom from o2 . Cut 12 bytes in the first of diskinmage_ver.nb0 and rename to diskimage.nb0 , copy to miniSD card in original folder ( format in FAT or FAT 32 , < 512Mb ) , put your PPC in to boot loader . => wait for 15min it will be ok . After that you can up with any rom . PDA 20758 rom have very nice interface , but sometime you can not soft reset , and ram is little ( about 18Mb if use TouchFlo ) .
Where i can donwnload ext rom,in kc9 i can't download
please help me can u upload in media fire

Categories

Resources