Missing ROM Flashing on Atom Exec - iPAQ rw6828, XDA Atom ROM Development

Hi, all.
I was missed the ROM Flashing. After I downloaded the SonBlack 20758 Rom and Run UpdateUtility, I found that I forgot to move all file to c:\windows\temp and I have the old rom for HP6828 stored in that folder. After I flashed my Atom Exec, now my boot screen is always flash every 3 seconds with HP screen. And I can't get into the bootloader by pressing camara+reset. Now I need to re-flash into Atom Exec, what can I do? Everybody please help me in this problem.

Pls use original rom from o2 . Cut 12 bytes in the first of diskinmage_ver.nb0 and rename to diskimage.nb0 , copy to miniSD card in original folder ( format in FAT or FAT 32 , < 512Mb ) , put your PPC in to boot loader . => wait for 15min it will be ok . After that you can up with any rom . PDA 20758 rom have very nice interface , but sometime you can not soft reset , and ram is little ( about 18Mb if use TouchFlo ) .

Where i can donwnload ext rom,in kc9 i can't download
please help me can u upload in media fire

Related

UPGRADE MDA 2/XDA 2 BY SD CARD AND MY OWN ROM

Please explain me how can I do upgrade windows ce in my MDA 2.
Step by step. Need I special program to format sd card ? What is country ID problem in this case. When I try upgrade directly ( USB ) then see :
error geting device data. File getdevdata.exe - kill my system and MDA display only bootloader screen ( serial/usb , v1.03 ). Thanks for advice....
the rom KITCHENs are ONLY!!!! for xda1 never xda2
Whats a pity ! Unluckily certain You have right. So, how can I prepare my own ROM. Means best like rom kitchen but not necessarily. I know about Extennded ROM Editor (by the way:the password (e.g. HTC) will be wrong:.......). Thanks for reply

Help !!Big Problem At the time Downgrade atom.

Dear
Friends
I need to help’s your.
a little while ago I upgradede my xda Atom rom.( from Xda-Atom-ENG-20060426 to Xda-Atom-Exec-ENG-20060721)
But not worked (in navigation pad )centre key.
I decided to downgrade my xda atom rom. I maked source this subject and find this page : Mr. tjs0509 wrote (member) http://forum.xda-developers.com/showthread.php?t=276664
tjs0509 said:
1. Download the 20060426 from www.seeo2.com
2. Run DSUU, after extracting the files in directory windows\temp DO NOT CLICK NEXT
3. Copy all 6 files into temporary or another directory
4. From that 6 files, copy 2 files with the extention nb0 (diskimage_ver.nb0 and eboot.nb0) to your mini SD
5. After copying into your mini SD, rename diskimage_ver.nb0 into diskimg.nb0
6. Now, you can run bootloader by pressing camera and soft reset ( you have to put your mini SD into your Atom so that the bootloader will boot from mini SD
7. Just wait and if there is some error message do not bother them, the most important that downloading OS Image and Eboot
8. After that your screen will blank, do not worry or panic
9. Pull out your mini SD and connect USB to PC and run bootloader again
( please make sure that your usb already connected to pc )
10. Now u can normally run the 20060426
Click to expand...
Click to collapse
I applied his descriptions. But my xda atom not worked ... not open... not work any keys... black screen ....
If have you knowledge about This subject , how can I repair it .?
Please ! please informe me....
Best wishes
Is anybody can help you.I have same problem.New atom exec software running properly on my device, but phone function is not running.
tatarogul said:
Dear
Friends
I need to help’s your.
a little while ago I upgradede my xda Atom rom.( from Xda-Atom-ENG-20060426 to Xda-Atom-Exec-ENG-20060721)
But not worked (in navigation pad )centre key.
I decided to downgrade my xda atom rom. I maked source this subject and find this page : Mr. tjs0509 wrote (member) http://forum.xda-developers.com/showthread.php?t=276664
I applied his descriptions. But my xda atom not worked ... not open... not work any keys... black screen ....
If have you knowledge about This subject , how can I repair it .?
Please ! please informe me....
Best wishes
Click to expand...
Click to collapse
you cannot fix yourself, you must send to O2, the method you used killed the bootloader.

[HELP] Please help me dump full flash ROM of HP rw6815 & rw68x8

Because my device error with RUU so that I can't flash my device with PC.
Please help me dump full flash ROM of HP rw6815 & rw68x8.
ROM HP rw6815 & rw68x8 you can download here :
-HP iPAQ rw6815 WWE ROM : ftp://ftp.hp.com/pub/softpaq/sp35501-36000/sp35815.exe
-HP iPAQ rw6818/rw6828 WWE ROM : ftp://ftp.hp.com/pub/softpaq/sp34001-34500/sp34074.exe
And here is ROM Dump tools : http://www.mediafire.com/?94t1m1me641
Download this file then copy to your device and run it, it's will dump recent ROM to miniSD card with name : romdump.bin
Please help me upload to http://www.mediafire.com
Thank so much !!!!
P/S : with full flash ROM we can restore HP68xx to WM5 :
-Rename romdump.bin to flash.img
-Copy to miniSD card.
-Go to Bootloader and it will flash your device automatic.
Everyone who have rw6815 & rw68x8 please help me !!!
no need to do so . cut first 12bit header me the diskimage_ver.nb0. and rename to diskimg.nb0,flash it using sd card .
if we do it by the way told , how can we get the right serial number in hp asset viewer ?

extracting things from original hp ipaq rw6815 rom

Hi, is there any way to extract today plug-in which shows baterry, free ram, free rom a backlight intensity.. from original HP rom???
i have installed wm6 rom (remake of atom exec rom) and there isn't this plug-in... help me I miss it!
Hi, look for a software called Today panel pro...its cool!
could somebody extract it??? it must be somewhere in hp windows folder....
kosmodisk said:
Hi, is there any way to extract today plug-in which shows baterry, free ram, free rom a backlight intensity.. from original HP rom???
i have installed wm6 rom (remake of atom exec rom) and there isn't this plug-in... help me I miss it!
Click to expand...
Click to collapse
you put WM6 in the iPAQ rw6815.
How do you do that, i am looking to do also....please help
I have the dutch version.
dont look at my english
onkeltje said:
you put WM6 in the iPAQ rw6815.
How do you do that, i am looking to do also....please help
I have the dutch version.
dont look at my english
Click to expand...
Click to collapse
hi there,
try the post PDAVIET in this atom mobile 6
hy... i'm having problems with my hp ipaq rw6815..home screen flashing
i tryed to make an update and the connection was lost since then it never started... it stays on home screen and it restarts....can anyone give me some help? ... thanks...excuse my english...
aleczar said:
i tryed to make an update and the connection was lost since then it never started... it stays on home screen and it restarts....can anyone give me some help? ... thanks...excuse my english...
Click to expand...
Click to collapse
Yes you still could have an choice to use your fone back in running condition
You can google the hp ipaq rw6815 Rom on xda forum you will found it then download the which can be installed by SD Card and do the further steps given below.
Step by step upgrade 68xx ROM via SD Card
Remember you should have fully charged battery !!!!!!!
1. Extract and copy diskimg.nb0 and cabs folder into a SD card (FAT32 and Blank SD Card are recommended, Kingstone MD-SD not recomended)
2. Press and hold 2 soft key( - ) and reset, Boot loader will show up.
3. Wait abut 10 ~ 20 Minutes
4. Align Screen, adjust time and date
5. Restart your 68xx
Hope your devive will work again.
Have a nice day

Help~ Unable to flash the bootloader to MN1

References:
http://forum.xda-developers.com/showthread.php?p=1840788
http://forum.xda-developers.com/showthread.php?p=1684559&highlight=EBOOT.NB0#post1684559
chartreux said:
No, don't use the EBOOT from the ATOM EXEC(MN2). you must use MN1(from ATOM STD). I had attached it to you.
here is the step.
1. copy eboot.nb0 to your SD-CARD (in the root) and insert your card to your ATOM EXEC
2. preset camera+reset
3. you will see the progress status (wait until your device off)
4. TAKE out your SD-card
5. preset camera+reset again (you will see MN1 bootloader)
6. hook up your USB
7. run software update utility (you may use WM5 or WM6 EXEC ROM)
8. wait until 6% stack on extended ROM (you will see failed status on your bootloader screen during update ext ROM)
9. press on/off + reset perform hard reset
10. your windows will be up and able to sync with activesync. (your bootloader now MN2 again!!)
11. now you may perform the DSUU and this time your EXT rom will be update successfully.
12. delete EBOOT.bin from your SD card
13. done and enjoy.
please beware, you are playing the most dangerous part now.
Click to expand...
Click to collapse
Follow by the instruction.
I use the 2GB Mini SD card to flash the MN2 bootloader to MN1.
Before I copy the EBOOT.nb0, I format the MiniSD and I had confirmed the card can be read in AtomExec.
The screen display "transfer completed" after I inserted the MiniSD and press camera+reset.
After the message was shown, no response come out in next 3 - 5 minutes.
So I press camera+reset again.
The Atom Exec will load in MN2 bootloader again.
I got a trouble in step3.
I had tried the Atom EBOOT.nb0 & Atom Exec Offical WM5 EBOOT.nb0.
Both of them are same, after the message come out and nothing to do.
Any solution I can go back to WM5 ?
I'm can not stad for the AtomExec unable to use the Bluetooth headset while in phone call.
Try to use 256MB memorycard.
Is there can not use in 2 GB ??
it is because I have not 256 MB MINI SD......
admin88hk said:
Is there can not use in 2 GB ??
it is because I have not 256 MB MINI SD......
Click to expand...
Click to collapse
It's been proofed in WIKI and it's work. Try it.
Maybe the problem is you have to borrow 256MB or 512 MB
admin88hk said:
Is there can not use in 2 GB ??
it is because I have not 256 MB MINI SD......
Click to expand...
Click to collapse
For some brand, 2gb mini sd can't used for sdflashing. I have 2gb V-Gen and i can flashing with it.
do you know that can I use Kingston to do the flashing ??
to hiro77, thx for your reply, I am lookig for my friends which have 256MB Mini SD
SDflashing tested by me:
- 256MB: V-Gen/MCPro=OKE
- 512MB: V-Gen=OKE
- 1GB: V-Gen/MCPro=FORGET IT
- 2GB: V-Gen=OKE
Thank you very much for chartreux, hiro77, abusalza, katon808, tjlabais and homer.
I am using a 64 MB MiniSD Card succuessfully roll back to WM5 today.
All step are smoothly.
admin88hk said:
Thank you very much for chartreux, hiro77, abusalza, katon808, tjlabais and homer.
I am using a 64 MB MiniSD Card succuessfully roll back to WM5 today.
All step are smoothly.
Click to expand...
Click to collapse
Hi,
can you help me where I can download the Atom Exec WM5 EBOOT.nb0 file.
thanks
Same me
when i cannot find eBoot.nb0 form Office ROM.
I use eBoot.nb0 from Atom/Atom Pure WM 6.0 Kumara Touch New
Extract to folder.
-I copy it to 1 Gb Kingston MiniSD.
-Hard Reset I found my Atom Exec get MN1 Loader file.
-My Atom Exec Show Load eBoot and Ignore other. Cuase MiniSD Have 1 file only.
-when finish and show soft reset.
I remove my MiniSD and Camera+Softreset to MN1 boot loader mode.
-Connect to USB. Pc have sound 1 time.
-I use WM5 Office ROM upgrade it.
You will found error 6% in stage 3 Extended Rom.
Don't warry it's bug normally of WM5 Office ROM.
You must Hard Reset and Default Factory by CallKey+EndCallKey.
No Aligment, No Setting Time, when PC found new hardware.
You will try upgrade by WM5 Office ROM again for get Extended ROM and
other.
OK, Hard Reset for finish or Upgrade to WM 6.1 as Me.
today, I finding solution for upgrade my Atom Exec all time.
Cause I Noob for It. And my old PocketPC is Atom Black.
It's has upgrade flow differrence my old PocketPC.
But, This time i understand Atom Exec upgrade and Error 6% Now.
Hope, Your found the way for clear your problem.
The Power still with you.
mikomarco said:
Hi,
can you help me where I can download the Atom Exec WM5 EBOOT.nb0 file.
thanks
Click to expand...
Click to collapse
If you can read chinese you can find EBOOT.nb0 at here
otherwise you can find at here

Categories

Resources