G4 Wizard bricked...CAN access bootloader - G4

Hey guys...I believe my G4 device is bricked yet still recoverable.
I was flashing the htc 8125 update today to my wizard from the vanilla WM6 ROM. (Yes I want to go back to originial WM5).
I'm still quite new to this whole flashing scene, but that's besides the point.
I tried using the EXE of this ROM:
RUU_Wizard_225111_22511102_022511_CWS_WWE_Ship_1.e xe
and after that didn't work I believed that maybe I should try using shelltool, which I used for the Vanilla WM6 ROM.
It went for about 35 minutes...then I decided to pull the cable. Shelltool said it completed the flash..so I hard reset the device. It didn't get past the cingular splash screen.
Only until later did I start believing that this was a G3 only ROM.
I'm still unsure whether it was g3 or g4, but my device is a G4.
I believe i can still get into bootloader(the 3 color screen I believe it is), but can't connect to the USB to flash any other ROM, or so I believe.
When I plug in the USB the device shows that it is connected, yet the computer doesn't do anything.
I have no idea, i've been searching google, searching XDA with google, maybe just not using the right words.
the device
SPL/SPL is 2.25.0001
GSM 02.25.11
OS(Believe it is displaying the OS it was supposed to be AFTER flash): 2.25.11.1
Can anyone direct me down the right path?

Flash with your original stock ROM, then SoftSPL/HardSPL and proceed with the update.

Related

Xda Mini S (G4) Stuck

Hi,
I had successfully used ShellTool to load Crossbow Reloaded v1.5 on my Xda Mini S (G4 CID-Locked)
But then I became inquisitive and I tried loading the WM6 Business Edition.
http://forum.xda-developers.com/showthread.php?t=302934
The process interrupted abruptly as the activesync connection broke (Don't know why that happened.) However I restart the device and now it is stuck on the initial blue O2 screen displaying IPL, SPL, GSM and OS information.
Now it is mentioned here
http://forum.xda-developers.com/showthread.php?t=293480
That if the device does not boot I should restart it in the bootloader (which I did), connect the usb and run RUU. But the download (Wizard_Love_2.26.10.2_WWE_Novii+CF2.rar) contains newromupdateutility_wizard_noid.exe and on running that I get the CONNECTION ERROR. I think this is happening because in bootloader, actyivesync cannot connect.
Sorry I am a novice in this... please help.
Regards.
Activesync will not connect from the bootloader. This is not a problem. Activesync is not needed to flash your phone. You just need the USB connection in the bootloader. As long as you see the letters USB in the corner you can flash.
Did you use the shelltool in the attempt to load the other WM6 rom? And if ActiveSync is required to use the shelltool then you may have to flash an official carrier rom in your current state (one that matches your CID so it will flash) and once your device boots again you should be able to use the shelltool and load the other rom that you want.
Personally this sounds like a big hassle to me and if it were me I would just pay the 25 bucks or whatever it is to get the unlocking software from the unlocker website and CID unlock my device so I could pretty much flash at will (G4 safe roms of course)
Downloaded the original rom from my-xda.com and it worked. Got the original system back.
Just updated to faria's wm6 using the same shelltool and all works fine. Looking at voip now.
thanks for the suggestion.
Cheers..

Help me revive my G4 8125 :(

Hello to everyone. I am newb here. I need a great men to help fix my phone. I got a Cingular 8125 G4 CID-locked but sim-unlocked device. Prior to upgrading, it finely works in a Cingular Official ROM and WM5. Now I decide to put some more interesting rom - a AKU 2.3 rom (if i am not mistaken this is a Wizard Love Rom). It was upgraded successfully. Then I flashed another rom which I am not familiar with the content. Unfortunately didn't go right this time. Now I am stuck with RGB screen. I even use shelltool in RGB screen (even knowing not to work in this kind of mode). In the middle of the process, the device turns off and shelltool hang, never show progress. I pull out the usb cable from the device. Then when I turn on the unit it gives me the RGB screen showing IPL/SPL 2.25.0001 with no splash screen, OS and GSM. I tried flashing different rom which I know is safe for G4 CID-locked device but no luck at all. I can get through 96% and the device turns off automatically and return to blinking RGB screen with on and off usb connection. Did I bricked my device? Please help revive my Wizard 100. Thank you in advance.
Nopes ! your phone is not bricked,as long as it gets into Bootloaders (RGB screen) its safe.
Download official cingular stock rom and flash in Bootloaders to recover or flash wizard_love rom.After recovering,don't use shelltool,its risky and old method,now a much better method is available.Either upgrade through 'SoftSPL or HardSPL'.
Thanks for the reply I appreciate it. I did all that, download the cingular official rom from the link I got from xda forum and wizard love rom and flashed it but no luck at all. It gives me the same problem. When doing the upgrading the phone restart at 96% and reboot itself showing different error every upgrading attempt. What I only got in bootloader screen is the IPL/SPL 2.25.0001 no OS and GSM (Radio Rom). Maybe I got a corrupted file in my phone. Or just my battery. I tried wall charging but no good. Should I buy a new one or try my luck again. BTW, the error message appeared during upgrading are 274, 302 and 260. The first two seems to be serious matter. Please help me.
Probably,the battery is the culprit here,if its not fully charged or not having enough juice,it won't complete the flash,there are many comm errors due to weak battery,try to get it charged and then try.
How many hours just to have a fully charge battery using wallcharging?
Or maybe my battery needs to be replace. FYI it's 1 yr and 8 mos old now.
My Wizard was revived this time. The problem was the dead battery. I bought a new one and everthing goes fine when I flash the Official Cingualr Rom. Thanks to zabardast_1 and the gurus here in the forum.
Thanz !
It was pleasure to help you,glade you got it up and running

HTC 8125 Bricked or NOT? What next?

Hi guys I need some help. I have a Cingular HTC 8125, I was trying to upgrade the rom on it to a new WM6 and here is what happened.
I have been researching the topic for about 3 weeks.
Its a G4 Device being upgraded with VISTA w/ Moded drivers for Ative SYNC
IPL 2.25.0001
SPL 2.25.0001
I used the shell tool to install one of the roms waited about 2 hrs and finally noticed that the window was NOT RESPONDING so I had to shut down and start over. The phone got to the second screen but froze there now showing
IPL 2.25.0001
SPL 2.25.0001
GSM 02.25.11
OS 10.1.0.811
On the Cingualr Background, I can still enter the Bootloader screen but nothing else?
Nothing else happens I cant connect the phone to the PC to do anything else.
Is it bricked or not is my question and what can I do to flash OEM rom or something that will work.
I tried OEM Cingular rom but I get ERROR 260 No connection to the phone?
Any help will be greatly appreciated!
Bricked phone
You should had firstly either hardspl or soft spl the phone b4 trying to load any rom
It's not bricked as long as you can see the RGB screen (Colors red, green and blue)showing the same IPL/SPL such as yours; IPL: 2.25.0001 and SPL: 2.25.0001. AND PLEASE BE CAREFUL WITH YOUR DEVICE CAUSE ITS G4 MEANING YOU CAN NOT JUST INTALL/FLASH ROM. Make sure that the Rom you flash not contain G3 IPL and SPL which is 2.xx.001. If so, then you will bricked your device.
Desiji is right, you should install rom with softSPL or hardSPL.
Try to flash the Official Cingular Rom or Wizard Love Rom. If success, then you can install other Rom using what desiji said. Just make sure that its a G4 safe rom. And another thing, try to charge battery using wallcharger not in the device. U need enough battery to perform rom flashing.
Hope this help revive your Wizard.
esdee007
WOW !
grrrrr8,you are a quick learner
CateraMV6
Yeah ! I certainly agree with esdee007 and desiji
Thanks
Hey guys thanks, thats what I thought but I think my main problem is the VISTA I need to get a hold of XP and try all that because the Vista is having issues with connecting to the phone at the moment, I can not get it to show it as a device. It does make a beep noise when you connect/disconnect it so its doing something but Vista is just too much of a pain in the rear to deal with.
Its a good news that its not bicked so all hope is not lost.
What is the opinion on Tmobile WING!? any reviews should I get that phone instead?
BTW where do I find these G4 Safe ROMS? and how do I tell if they have the IPL/SPL in them? Do I need to hack them to tell?
And is Soft or Hard recommended?
YUP ! sure vista is still not compatible for flashing,WinXP is highly recommended and trouble free.
All official stock roms are safe to flash both the devices G3 or G4,secondly,all the latest custom build wm6 or wm6.1 are safe for both the devices,as they don't include any IPL/SPL in them.
If you plan to flash many roms,than 'HardSPL' is recommended,coz its done only once and the device remains semi_Cid unlock untill you personally remove HardSPL,but with SoftSPL,its done everytime you want to flash a new rom,choice is all yours,how you want to go about it.

Beta has expired.... What to do?

I have a Cingular 8125 G4 (IPL 2.25.0001; SPL 2.25.0001) that was upgraded to a WM6.1 ROM a few months back. Apparently it was based on a "beta" ROM, and it recently expired, leaving it unable to function with the expired message referred elsewhere here. So I figured just to reflash to another ROM, but does not work. It stays at the old 99% and never finishes. Now it will go into the tri-color (RUU) bootloader mode, but will not boot. I assumed this isn't "CID-unlocked" then, so read through postings here. Lokiwiz and the other tools to get around this either require an active ActivSync connection to upload a CAB file or just say the ROM tool is too old. What do I do at this point? The phone does not appear to be "bricked", yet I cannot seem to load a new ROM and to "CID-unlock" it requires it to be in WM sync.
jgoodfellow said:
I have a Cingular 8125 G4 (IPL 2.25.0001; SPL 2.25.0001) that was upgraded to a WM6.1 ROM a few months back. Apparently it was based on a "beta" ROM, and it recently expired, leaving it unable to function with the expired message referred elsewhere here. So I figured just to reflash to another ROM, but does not work. It stays at the old 99% and never finishes. Now it will go into the tri-color (RUU) bootloader mode, but will not boot. I assumed this isn't "CID-unlocked" then, so read through postings here. Lokiwiz and the other tools to get around this either require an active ActivSync connection to upload a CAB file or just say the ROM tool is too old. What do I do at this point? The phone does not appear to be "bricked", yet I cannot seem to load a new ROM and to "CID-unlock" it requires it to be in WM sync.
Click to expand...
Click to collapse
You need to flashed a shipped ROM, hardspl and the flash the custom rom
Shipped ROM?
Okay... after extensive searching, I got lucky and found and flashed a wizard_love ROM and have a stock WM5 image on the beast. I then ran a downloaded hard_spl-G4 that seemed to do the samething but did something with the SPL. Looks like now SPL 2.21.olip. So now find a WM6.1 ROM to flash? Can one be had without the TouchFLo junk? I just like the WM6.1 today screen. It works well on my T-Mobile SDA, but I need the more PDA aspects of the Wizard.
Try WM 6.5 by XDA2 or Cracing, there are nice CLEAN ones which work great and look great
Got everything working WM61 Wizard G4
Thanks for the pointers... I got it fixed two days ago. This site is a blessing. Will donate this weekend for sure! Xda-developers is a work of inspiration that I will have to trawl more often.

HTC Wizard with no OS, help please!

Hi. I have a G4 (ipl 2.25.0001, spl 2.25.0001) Wizard 8125. I tried to flash to a wm6.5 rom and i know i did something wrong. Everytime i try flashing a new rom it goes all the way to 100 percent and then once it reboots it just goes back to the bootloader screen and stays there. I had activesync off just like the threads say to do and still nothing. Its SIM unlocked since im using an ATT sim card instead of cingular (now att). I would either like the original rom back on this or atleast a wm6 rom somehow. I do have a radio rom upgrade too. Any help would be appreciated.
CID unlocked?
What rom are you using?
I don't think that changing your sim from Cingular to AT&T needed an unlock.
You may need to look at this:
forum.xda-developers.com/attachment.php?attachmentid=52404&d=1190997171
Its a direct link to mUn's RUU. this worked for my CID locked phone.
Also, take a look at this page and go down to "G4 Only" it should answer many of your questions.
wiki.xda-developers.com/index.php?pagename=Wizard%20Windows%20Mobile%206%20for%20newbies
i was trying to use a WM6.5.3. My phone wasnt bricked! I found the original cingular 8125 rom and fixed my phone. I did however after i fixed the rom issue i did CID unlock my phone with no problems. Also SIM unlocked it too to be safe. Yes you were right it didnt need a unlock to use an AT&T SIM on it either. But now im trying to get the original rom back on. I use the Iphone Killer WM6.5.3 Rom on this site and now i cant downgrade back to my original. The reason i want to downgrade is that the phone is severly slow with wm6.5.3 on it. Id rather just go to wm6 or wm5 again and stick with that.
double check
Are you getting the 3 clor screen?
Just plug the device into your computer and run mUn's RUU. It should update even though active sync doesn't show it as connected.
If you can't get mUn's RUU to work, plug the phone into your computer and load the wizard love rom or any 'CID safe' ROM. These ROMs are reccomended before running mUn's RUU.

Categories

Resources